The lines on the position-time graph shows the velocities of different vehicles. Which line represents a vehicle moving at a constant velocity?
A. D
B. B
C. A
D. C

Answer:

Conduction, convection, and radiation

Explanation:

Conduction is the process in which energy is transferred from a hot body to a cooler body. Convection is a process by which heat is transferred as a result of the movement of heated fluid in the form of air or water. Radiation refers to the transmission of energy through a material medium.

Based on the information provided, a lava lamp could be used to provide an example of conduction, convection, and radiation.

Answer:

Most potential energy: A

Most kinetic energy: D

Explanation:

Kinetic Energy is the type of energy an object has due to its state of motion. It's proportional to the square of the speed.

The equation for the kinetic energy is:

[tex]\displaystyle K=\frac{1}{2}mv^2[/tex]

Where:

m = mass of the object

v = speed at which the object moves

The gravitational potential energy is the energy stored in an object because of its height h in a gravitational field.

It can be calculated with the equation:

U=m.g.h

The point where the object has the most potential energy is that where it has more height. It corresponds to point A.

When the object is at zero height, all of its potential energy was transformed to kinetic, thus the point where the kinetic energy is D.

Most potential energy: A

Most kinetic energy: D

Answer:

potentail enegry at point a and kinetic enegy at point c

Explanation:

i did this i fourth grade please mark brainlist

Spreading my love to everyone, <3

Answer: Physical fitness can be defined as the ability of a person to perform daily routine tasks without any ailment.

Explanation:

Dance workouts can help in improving the physical fitness of the person.

This may involve improvement of the cardiovascular strength.

This may also help in improving the strength and endurance of a person.

This improves the stamina, flexibility, and composition of the body.

The dance also helps in maintaining balance and attaining the correct posture.

Answer:

How much power is used if 350J of work is done when pushing a box for 5 seconds.

Explanation:

the answer is 70watts

Answer:

the answer is the core

Explanation:

the core is composed of iron and nickel

Answer:

They're typically made up of three main parts: protons, neutrons and electrons. Think of the protons and neutrons as together forming a “sun”, or nucleus, at the centre of the system. The electrons orbit this nucleus, like planets. If atoms are impossibly small, these subatomic particles are even more so.

Explanation:

hope i helped.

Answer:

Atoms consist of a nucleus made of protons and neutrons orbited by electrons. ... We now know that atoms are made up of three particles: protons, neutrons and electrons — which are composed of even smaller particles, such as quarks.

Explanation:

Given :

A 2450 kg stunt airplane accelerates from 120 m/s to 162 m/s in 2.10 s.

If the airplane is putting out an average force of [tex]5.8810\times 10^4 \ N[/tex].

To Find :

The average friction force exerted on the airplane by the air.

Solution :

Acceleration is given by :

[tex]a = \dfrac{162-120}{2.10}\ m/s^2\\\\a = 20 \ m/s^2[/tex]

Now, force equation is given by :

[tex]F - F_{friction} = ma\\\\F_{friction} = F-ma\\\\F_{friction} = 58810 - (2450\times 20 )\\\\F_{friction} = 9810\ N[/tex]

Therefore, frictional force exerted in the airplane by the air is 9810 N.

Answer:

Density of the ship :133.33 kg/m³

Mass of the ship :50,000,000 kg

Ships are able to float on water because they displace a volume that equals  their own weight

Explanation:

The formula for density is ;

Density = Mass/Volume

But the mass of  displaced fluid is give by the formula;

m=ρV where ρ is density of the fluid and V is volume of water displaced

Volume of liner= 375000 m³

Volume displaced = 50000 m³

The volume of the water displaced is equal to mass of the liner

I m³ = 1000 kg

50000 m³ = 50000*1000 =50,000,000 kg

50,000,000 kg ----------mass of the ship

So if ;

m= 50,000,000 kg

v= 375000 m³

ρ = m/V

ρ = 50,000,000/375000

ρ = 50,000,000/375000

ρ =133.33 kg/m³

Ships are able to float on water because they displace a volume that equals  their own weight. Additionally, the air contained in the spaces of the ship inside is much less dense than density of water aiding in the floating process.

Let's calculate the equivalent resistances on both circuits.

On Diagram A we have a series connection of the resistors. The equivalent resistance will be the sum of all resistances:

[tex]R_{eq}=1+1+1\\\\\boxed{R_{eq}=3\Omega}[/tex]

On diagram B we have a parallel connection of the resistors. The reciprocal of the equivalent resistance will be the sum of the reciprocals of all the resistances:

[tex]\frac{1}{R_{eq}} = \frac{1}{1} +\frac{1}{1} +\frac{1}{1} \\\frac{1}{R_{eq}}=3\\\\\boxed{R_{eq}=\frac{1}{3}}[/tex]

Therefore, the larger resistance occurs on diagram A.

For the current, recall

[tex]V=IR[/tex]

Where [tex]I[/tex] stands for current [tex]R[/tex] is the resistance and [tex]V[/tex] is the voltage. Rearranging the equation we have

[tex]I = \frac{V}{R}[/tex]

We can see that the larger the resistance, the smaller the current gets. So the larger current must happen in the diagram with smaller resistance. Therefore, the larger current occurs on diagram B.

Glad to help, wish you great studies ;)

Mark brainliest if you deem the answer worthy

Answer:

I do drink bottled water but not to often, I live about 2.8 miles away from its water source and if i did'nt drink bottled water and I had to found out how my drinking water is treated I would go ask the people that are taking care of the water.

Explanation:

hope this helps

Answer:

A

Explanation:

Trust me I just took it !

Answer:

A projectile is an object upon which the only force is gravity. ... The horizontal motion of the projectile is the result of the tendency of any object in motion to remain in motion at constant velocity. Due to the absence of horizontal forces, a projectile remains in motion with a constant horizontal velocity.

Answer:

for number 1 i got 100

Explanation:

Answer:

Based off the word "conserved" I would say

A. Conservation of Momentum.

Explanation:

Answer:

A.) Conservation of Momentum

Answer: In the Physics models, we do not take into account the energy change by the friction of moving components

Explanation:

Answer:

[tex]\huge\boxed{\sf Speed = 2 \ m/s}[/tex]

Explanation:

Given:

Time = t = 45 seconds

Distance = S = 90 meters

Required:

Speed = v = ?

Formula:

v = S / t

Solution:

v = 90 / 45

Speed = 2 m/s

[tex]\rule[225]{225}{2}[/tex]

Hope this helped!

Answer:

39 m/s

Explanation:

Answer:

39 m/s

Explanation:

Answer:

(a) The acceleration oF the car is [tex]-1764.7 m/s^2[/tex] or -180.1 g’s.

(b) The magnitude of the force on the driver's body is 123529 Newtons

Explanation:

Given that:

The initial velocity of the car before the impact, u=172.8 km/h

Or, [tex]u =172.8 \times \frac {1000}{3600} m/s= 48m/s[/tex]

As the car came to a complete stop after the collision, so the final velocity of the car, v=0.

The time required to stop the car completely, [tex]t=2.72\times 10^{-2} s[/tex]

(a) Assuming the acceleration is constant, so

Acceleration, [tex]a= (v-u)/t[/tex]

So, [tex]a=\frac {0-48}{2.72\times 10^{-2}}=-1764.7 m/s^2[/tex]

Now, expressing the acceleration in the unit od "g's",

[tex]a=-1764.7\times \frac{g}{g} \\\\\Rightarrow a=-1764.7 \;m/s^2\times \frac{g}{9.8\; m/s^2} \\\\\Rightarrow a=-180.1 g[/tex]

Hence, the acceleration od the car is -1764.7 [tex]m/s^2[/tex] or -180.1 g’s.

(b) Mass of the driver of the car, m=70.0 kg

The acceleration of the body of the driver is the same as the acceleration of the car.

So, the acceleration faced by the driver, [tex]a= -1764.7 m/s^2[/tex]

As forec = mass x acceleration, so

The force on the driver's body = 70 x (-1764.7)= -123529 Newtons.

The negative sign means the force is in the opposite direction of the direction of motion of the car.

Hence, the magnitude of the force on the driver's body is 123529 Newtons

Answer:

B. The magnetic field of the magnets causes a mechanical force to

act on the electric charges within the moving loop of wire.

The magnetic field of the magnets causes a mechanical force to

act on the electric charges within the moving loop of the wire causes an electric current to flow in the loop of wire that turns between an electric generator's two permanent magnets, therefore the correct option is B.

A magnetic field could be understood as an area around a magnet, magnetic material, or an electric charge in which magnetic force is exerted. The SI unit of the magnetic field is tesla.

the magnetic field can also be generated as the magnetic effect of electric current for example when current is flown through an electrical wire there is the generation of the magnetic field around the conducting wire

For a simple bar magnet, N-pole and S-pole are the points on a magnet that have the strongest magnetic field. The magnetic field originates from the north pole and terminates in the south pole of a magnet.

The magnetic field of the magnets causes a mechanical force to act on the electric charges within the moving loop of the wire responsible for the electric current to flow in the loop of wire that turns between an

electric generator's two permanent magnets.

Learn more about the magnetic fields from here

brainly.com/question/23096032

#SPJ5

Answer:

A spring is compressed and held at compression by a person before releasing it

Explanation:

All the other answers are showing things that are at rest and have no energy starting nor going through them. This answer show how the energy is starting and being released.

Answer:

I would add a higher center of gravity, and make the car shaped in a way where wind could hit it, and the wind won't affect the car's movement whatsoever.

Explanation:

A higher center of gravity ensures that your car will take less effects from the wind, and the shape would make it barely noticeable.

It is simpler to maintain your balance the lower your center of gravity is. You can lean over more if you're sitting down than if you're standing. You can lean further to one side or the other when your center of gravity is low.

From a handling perspective, lower is better since it lessens weight transfer during cornering and braking and lessens the tendency to roll over.

For safe handling, the height of the vehicle's center of gravity is crucial. You are more likely to go over if your center of gravity is high, like in the case of having large or stacked-high cargo on top.

It is especially hazardous when driving around curves or when swerving to avoid hazards.

Increase the center of gravity of the vehicle and shape it so that it can be hit by wind without the wind having any impact on how the vehicle moves.

Therefore, Your car will be less affected by the wind if it has a higher center of gravity, and the shape would barely be evident.

Learn more about blow here:

https://brainly.com/question/10750178

#SPJ2

Answer:

[tex]\huge\boxed{\sf a_{c} = 15.6\ m/s^2}[/tex]

Explanation:

Given Data:

Radius = r = 40 m

Speed = v = 25 m/s

Required:

Centripetal Acceleration = [tex]\sf a_{c}[/tex] = ?

Formula:

[tex]\sf a_{c} = \frac{v^2 }{r}[/tex]

Solution:

[tex]\sf a_{c} = \frac{v^2}{r} \\\\a_{c} = \frac{(25)^2}{40} \\\\a_{c} = \frac{625}{40} \\\\a_{c} = 15.6 m/s^2\\\\\rule[225]{225}{2}[/tex]

Hope this helped!

Answer:

The speed of the completed train is 0.0[tex]\bar 6[/tex] m/s

The direction of the completed train is South

Explanation:

The given parameters are;

The mass of the locomotive, m₁ = 125,000 kg

The initial speed of the locomotive, v₁ = 1.0 m/s

The mass of the gondola cars, m₂ = 1,750,000 kg

The initial sped of the gondola cars, v₂ = 0

Let v₃ represents the speed of the completed train. From the principle of conservation of linear momentum, we have;

m₁·v₁ + m₂·v₂ = (m₁ + m₂)×v₃

Substituting the known values, gives;

125,000 × 1.0 + 1,750,000 × 0 = (125,000 + 1,750,000) × v₃

∴ v₃ = (125,000 × 1.0 + 1,750,000 × 0)/(125,000 + 1,750,000) = 1/15 = 0.0[tex]\bar 6[/tex]

v₃ = 0.0[tex]\bar 6[/tex] m/s

The speed of the completed train = 0.0[tex]\bar 6[/tex] m/s

The direction of the completed train = The direction of the locomotive = South.

Answer:

t = 9.14 s

Explanation:

We first analyze the accelerating motion by applying first equation of motion:

Vf₁ = Vi₁ + a₁t₁

where,

Vf₁ = Final Speed of Car before turning off engine

Vi₁ = Initial Speed of Car = 0 m/s

a₁ = acceleration of car = 25 m/s²

t₁ = time taken in accelerating motion

Therefore,

Vf₁ = 25t₁   ---------- equation (1)

Now, we apply second equation of motion:

s₁ = Vi₁ t₁ + (1/2)a₁t₁²

where,

s₁ = distance covered during accelerating motion

Therefore,

s₁ = (0)t₁ + (1/2)(25)t₁²

s₁ = 12.5 t₁²   ----------- equation (2)

Now, we analyze the decelerating motion by applying first equation of motion:

Vf₂ = Vi₂ + a₂t₂

where,

Vf₂ = Final Speed of Car = 0 m/s

Vi₂ = Initial Speed of Car after turning off engine

a₂ = deceleration of car = - 3 m/s²

t₂ = time taken in decelerating motion

Therefore,

Vi₂ = 3t₂   ---------- equation (3)

Now, we apply second equation of motion:

s₂ = Vi₂ t₂ + (1/2)a₂t₂²

where,

s₂ = distance covered during decelerating motion

Therefore,

s₂ = (Vi₂)t₂ + (1/2)(-3)t₂²

s₂ = Vi₂ t₂ - 1.5 t₂²  

using equation (3):

s₂ = 3 t₂² - 1.5 t₂²

s₂ = 1.5 t₂²   ------------ equation (4)

Now, we know that the Final Velocity of accelerating motion (Vf₁) is equal to the initial velocity of decelerating motion (Vi₂):

Vf₁ = Vi₂

using equation (1) and equation (3):

25 t₁ = 3 t₂

t₁ = 0.12 t₂   ------------ equation (5)

Also, we know that sum of the distances is 200 m:

s₁ + s₂ = 200

using equation (2) and equation (4):

12.5 t₁² + 1.5 t₂² = 200

using equation (5):

12.5 (0.12 t₂²) + 1.5 t₂² = 200

3 t₂² = 200

t₂² = 200/3

t₂ = 8.16 s

substitute this in equation (5):

t₁ = 0.12(8.16 s)

t₁ = 0.97 s

Hence, the minimum time required for this motion is:

t = t₁ + t₂ = 0.97 s + 8.16 s

t = 9.14 s

Answer:

The Coriolis Effect makes things appear to move in a curve around our planet, like, for example, a plane. This is also due to the fact that our Earth is round, so nothing really moves in a straight line. It is "an effect whereby a mass moving in a rotating system experiences a force (the Coriolis force ) acting perpendicular to the direction of motion and to the axis of rotation."

Explanation:

Answer:

Explanation:

Given that the velocity of the river is 1.50m/s due east.

The velocity of the boat with respect to the river is 10.0 m/s due north .

The width of the river is 325 m.

Note that the velocity of the boat will help in crossing the river.

Hence, speed = distance/time

Speed = 10.0 m/s

Distance = 325 m

Time = ?

10 = 325/time

Time = 325/10

Time = 32.5s

Hence in 32.5s the horizontal distance traveled by boat will be

= 1.50m/s × 32.5s

= 48.75m

Answer:

The horizontal distance the ball travels is approximately 4.055 meters

Explanation:

The given parameters are;

The height from which the child kicks the ball = 3.5 m

The horizontal speed of the ball = 4.8 m/s

Therefore, we have;

The time it takes the ball to hit the ground is given by the relation;

h = u·t + 1/2·g·t²

Where;

u = The initial vertical velocity of the ball = 0 m/s

t = The time it takes the ball to hit the ground

g = The acceleration due to gravity = 9.81 m/s²

h = The height of the ball = 3.5 m

3.5 = 0 × t + 1/2 × 9.81 × t²

3.5 = 1/2 × 9.81 × t²

∴ t² = 3.5/(1/2 × 9.81)

∴ t = √(3.5/(1/2 × 9.81) = 0.8447 s

t ≈ 0.8447 s

The time the ball takes in flight = t ≈ 0.8447 s

Therefore;

The horizontal distance the ball travels = The horizontal velocity × The time of flight

∴ The horizontal distance the ball travels = 4.8 × 0.8447 ≈ 4.055

The horizontal distance the ball travels ≈ 4.055 meters.

Answer:

the correct one is B,   θ  =  [tex]\frac{1}{4\pi }[/tex]  w t    [rev]

Explanation:

This is a rotational kinematics exercise

        w = w₀ + α t

        w² = w₀² + 2 α θ

indicate that part of rest whereby the initial angular velocity is zero

        w = α t       -> α = w/t

        w² = 2 α θ

we substitute

        w² = 2 (w / t) θ

         w = 2 θ / t

        θ = w t / 2

This angle is given in radians, let's reduce to revolutions = 2π rad = 1 rev

        θ = w t / 2 rad (1 rev / 2π rad)

        θ  =  [tex]\frac{1}{4\pi }[/tex]  w t    [rev]

when checking the answers, the correct one is B, even though he has some mistakes in his writing