Answer:
36.11 degrees
Explanation:
index of refraction n = sin i/sinr
i is the angle of incidence
r is the angle of refraction
Substitute into the expression
1.39 = sin55/sin(r)
1.39 = 0.8191/sin(r)
sin(r) = 0.8191/1.39
sin(r) = 0.5893
r = arcsin(0.5893)
r = 36.11
hence the angle of refraction of light is 36.11 degrees
An elevator filled with passengers has a mass of 1603 kg. (a) The elevator accelerates upward from rest at a rate of 1.20 m/s2 for 2.50 s. Calculate the tension in the cable (in N) supporting the elevator.
Answer:
T = 17649.03 N = 17.65 KN
Explanation:
The tension in the cable must be equal to the apparent weight of the passenger. For upward acceleration:
[tex]T = W_A = m(g+a)\\[/tex]
where,
T = Tension in cable = ?
[tex]W_A[/tex] = Apparent weight
m = mass = 1603 kg
g = acceleration due to gravity = 9.81 m/s²
a = acceleration of elevator = 1.2 m/s²
Therefore,
[tex]T = (1603\ kg)(9.81\ m/s^2+1.2\ m/s^2)\\\\[/tex]
T = 17649.03 N = 17.65 KN
A laser of wavelength 720 nm illuminates a double slit where the separation between the slits is 0.22 mm. Fringes are seen on a screen 0.85 m away from the slits. How far apart are the second and third bright fringes
Answer:
The appropriate solution is "2.78 mm".
Explanation:
Given:
[tex]\lambda = 720 \ nm[/tex]
or,
[tex]= 720\times 10^{-9} \ m[/tex]
[tex]D=0.85 \ m[/tex]
[tex]d = 0.22 \ mm[/tex]
or,
[tex]=0.22 \times 10^{-3} \ m[/tex]
As we know,
Fringe width is:
⇒ [tex]\beta=\frac{\lambda D}{d}[/tex]
hence,
Separation between second and third bright fringes will be:
⇒ [tex]\theta=\beta=\frac{\lambda D}{d}[/tex]
[tex]=\frac{720\times 10^{-9}\times 0.85}{0.22\times 10^{-3}}[/tex]
[tex]=2.78\times 10^{-3} \ m[/tex]
or,
[tex]=2.78 \ mm[/tex]
The decibel level of the sound of a subway train was measured at 92 dB. Find the intensity in watts per square meter (W/m2). (Give your answer in scientific notation, correct to one decimal place.)
Answer:
I = 1.58 x 10⁻³ watt/m²
Explanation:
Here, we will use the following formula:
[tex]\beta = 10\ log_{10}(\frac{I}{I_o})[/tex]
where,
β = decibel level = 92 dB
I = Intenisty of sound in watt/m² = ?
I₀ = reference intensity = 10⁻¹² watt/m²
Therefore,
[tex]92\ dB =10\ log_{10}(\frac{I}{10^{-12}\ watt/m^2} )\\\\[/tex]
[tex]10^{9.2} = \frac{I}{10^{-12}}\ watt/m^2\\\\I = (1.58\ x\ 10^9)(10^{-12}\ watt/m^2)[/tex]
I = 1.58 x 10⁻³ watt/m²
A Carnot engine with an efficiency of 30% operates with a high-temperature reservoir at 188oC and exhausts 2000 J of heat each cycle. What are (a) the heat input per cycle and (b) the Celcius temperature of the low-temperature reservoir
Answer:
a) The heat input per cycle is 2857.143 joules.
b) The temperature of the low-temperature reservoir is 49.655 °C.
Explanation:
a) The efficiency of the Carnot engine is defined by the following formula:
[tex]\eta_{th} = 1-\frac{T_{L}}{T_{H}} = 1 - \frac{Q_{L}}{Q_{H}}[/tex] (1)
Where:
[tex]T_{L}[/tex] - Low temperature reservoir, in Kelvin.
[tex]T_{H}[/tex] - High temperature reservoir, in Kelvin.
[tex]Q_{L}[/tex] - Heat output, in joules.
[tex]Q_{H}[/tex] - Heat input, in joules.
[tex]\eta_{th }[/tex] - Engine efficiency, no unit.
If we know that [tex]\eta_{th} = 0.3[/tex] and [tex]Q_{L} = 2000\,J[/tex], the heat input of the Carnot engine is:
[tex]\eta_{th} = 1 - \frac{Q_{L}}{Q_{H}}[/tex]
[tex]\frac{Q_{L}}{Q_{H}} = 1 - \eta_{th}[/tex]
[tex]Q_{H} = \frac{Q_{L}}{1-\eta_{th}}[/tex]
[tex]Q_{H} = \frac{2000\,J}{1-0.3}[/tex]
[tex]Q_{H} = 2857.143\,J[/tex]
The heat input per cycle is 2857.143 joules.
b) If we know that [tex]T_{H} = 461.15\,K[/tex] and [tex]\eta_{th} = 0.3[/tex], then the temperature of the low-temperature reservoir:
[tex]\eta_{th} = 1 - \frac{T_{L}}{T_{H}}[/tex]
[tex]\frac{T_{L}}{T_{H}} = 1 - \eta_{th}[/tex]
[tex]T_{L} = T_{H}\cdot (1-\eta_{th})[/tex]
[tex]T_{L} = (461.15\,K)\cdot (1-0.3)[/tex]
[tex]T_{L} = 322.805\,K[/tex]
[tex]T_{L} = 49.655\,^{\circ}C[/tex]
The temperature of the low-temperature reservoir is 49.655 °C.
a force in the opposite direction
of the motion
forces: forces applied to an object in opposite directions that are not equal in size. Unbalanced forces result in a change in motion. friction: the force that opposes the motion or tendency toward motion of two objects that are in contact.
compare the time period of two pendulums of length 4m and 9m
area= length × length
area = 4m × 9m
ans 36
NEED THE ANSWER ASAP!!
the earth is on the month of June
What kind of model is shown below?
O A. A mathematical model
O B. An experimental model
O C. A computer model
D. A physical model
The type of model shown here is an experimental model. The correct option is B.
What is an experimental model?Animals are used in experimental modeling to model the development and progression of diseases and to test new treatments before they are administered to humans.
This result stems from the distinction that, whereas experiments are versions of the real world captured within an artificial laboratory environment, models are artificial worlds constructed to represent the real world.
Theories are plausible explanatory propositions developed to connect potential causes to their effects.
Models are schematic representations of reality or one's view of a possible world that are built to improve one's understanding of the world and/or to make predictions.
Thus, the correct option is B.
For more details regarding model, visit:
https://brainly.com/question/28381011
#SPJ7
Your question seems incomplete, the probable complete question is:
Consider a solid sphere and a solid disk with the same radius and the same mass. Explain why the solid disk has a greater moment of inertia than the solid sphere, even though it has the same overall mass and radius.
Answer:
Explanation:
In a Solid sphere; the moment of inertia around its geometrical axis can be expressed by using the formula:
[tex]\mathtt{I_s = \dfrac{2}{5} M_s R^2_s}[/tex]
For the solid disk; the moment of inertia around the central axis is:
[tex]\mathtt{I_D= \dfrac{1}{2}M_DR_D^2}[/tex]
Suppose [tex]M_D = M_S[/tex]; then we can say both to be equal to M
As well as [tex]R_D = R_S[/tex]; then that too can be equal to R
Now;
[tex]\mathtt{I_s = \dfrac{2}{5} M R^2} --- (1)[/tex]
[tex]\mathtt{I_D= \dfrac{1}{2}MR^2}---(2)[/tex]
Multiplying equation (1) by 2, followed by dividing it by 2; we have:
[tex]\mathtt{I_s= \dfrac{2}{5}MR^2} \times \dfrac{2}{2}[/tex]
[tex]I_s = \dfrac{4}{5} \times \dfrac{1}{2}MR^2 \\ \\ I_s = \dfrac{4}{5}\times I_D \\ \\ I_s > I_D[/tex]
Objects 1 and 2 attract each other with a electrostatic force
of 72.0 units. If the distance separating Objects 1 and 2 is
tripled, then the new electrostatic force will be _units.
Answer:
8 units
Explanation:
From the question given above, the following data were obtained:
Initial force (F₁) = 72 units
Initial distance apart (r₁) = r
Final distance apart (r₂) = tripled = 3r
Final force (F₂) =.?
The final force between the two objects can be obtained by using the following formula:
F₁r₁² = F₂r₂²
72 × r² = F₂ × (3r)²
72r² = F₂ × 9r²
Divide both side by 9r²
F₂ = 72r² / 9r²
F₂ = 8 units
Therefore, the final force between the two objects is 8 units
Explain what resonance is and give one example of a destructive outcome of resonance. Also give one example of a non-destructive outcome of resonance. Use details to support your answer.
Answer:
resonance is when a body is made to vibrate with the frequency of another body without touching it.
Explanation:
example of destructive: soldiers matching on a bridge unanimously can make the bridge collapse.
Answer:hi
i like ears
and lemon
and poetry
Explanation:
A mass m, which is connected to a spring of spring constant k, is released from x = A to perform
a simple harmonic motion. Another mass 2m, which is connected to another spring of the same
spring constant k, is also released from x = A to perform a simple harmonic motion. Compare the
values of total mechanical energy stored in these two spring-mass systems.
Describe the Compton Effect
One of the earliest vertebrate animal groups that evolved in the early Paleozoic Era
are
pls solve this:
if u solve this, I will surely mark u as brilliant
Answer: The frequency of a pendulum is [tex]0.2 s^{-1}[/tex].
Explanation:
Time period is defined as the time required to produce complete wave.
As we know that the frequency and time are inversely proportional to each other.
That means,
[tex]\nu =\frac{1}{T}[/tex]
Where,
[tex]\nu[/tex] is frequency of pendulum
T is time period
Given:
Time period = 5 seconds
Now putting all the given values in the above formula, we get the frequency of the pendulum.
[tex]\nu =\frac{1}{T}\\\\\nu =\frac{1}{5s}\\\\\nu =0.2s^{-1}[/tex]
Therefore, the frequency of a pendulum is [tex]0.2 s^{-1}[/tex].
Red light of wavelength 633 nm from a helium-neon laser passes through a slit 0.390 mm wide. The diffraction pattern is observed on a screen 3.10 m away. Define the width of a bright fringe as the distance between the minima on either side.
Answer:
Y = 5.03 x 10⁻³ m = 5.03 mm
Explanation:
Using Young's Double-slit formula:
[tex]Y = \frac{\lambda L}{d}[/tex]
where,
Y = Fringe Spacing = Width of bright fringe = ?
λ = wavelength = 633 nm = 6.33 x 10⁻⁷ m
L = Screen distance = 3.1 m
d = slit width = 0.39 mm = 3.9 x 10⁻⁴ m
Therefore,
[tex]Y = \frac{(6.33\ x\ 10^{-7}\ m)(3.1\ m)}{3.9\ x\ 10^{-4}\ m}[/tex]
Y = 5.03 x 10⁻³ m = 5.03 mm
A battery has an EMF of 12 Volts, internal resistance of 0.5 Ohms, and its terminal voltage is measured to be 13 Volts. The battery is ________ and has a current of ____ Amps passing through.
Answer:
The battery is charging and has a current of 2Amps passing through.
Explanation:
Given;
EMF of the battery, E = 12 V
internal resistance, r = 0.5 ohms
terminal voltage of the battery, ΔV = 13 volts
When the terminal voltage is greater than the EMF of the battery, the battery is being charged, allowing currents to pass in a reverse direction.
ΔV = E - Ir
ΔV - E = -Ir
13 - 12 = -0.5I
1 = -0.5I
I = 1 / -0.5
I = -2 A
The negative sign indicates the reverse direction of the current.
Therefore, the battery is charging and has a current of 2Amps passing through.
List five instruments of mechanical fluid
[tex]\sf{The~ different~ types~ of~ measuring~ instruments~ are:-}[/tex]
Calipers.Micrometer.Laser Measure.Ruler.Compass.what is the light synthesis ?
Answer:
Photosynthesis, the process by which green plants and certain other organisms transform light energy into chemical energy. ... During photosynthesis in green plants, light energy is captured and used to convert water, carbon dioxide, and minerals into oxygen and energy-rich organic compounds.
Explanation:
thank me later
What is measured by the change in velocity of a moving object?
Answer:
acceleration is measured
If a spider can travel 3.5 meters in 25 minutes, how fast can they go?
The linear magnification produced by a spherical mirror is 1/4.Analysing this value state the (i) type of mirror and (i) position of the object with respect to the pole of the mirror. Draw
ray diagram to justify your answer
“The magnification produced by a spherical mirror is -3”. List four information you obtain from this statement about the mirror/image.
The loudness of a sound is the wave's _______
Answer:
amplitude
Explanation:
The loudness of a musical sound is a measure of the sound wave's ?
is amplitude explanation:- The loudness of a sound depends upon the amplitude.Loudness of a sound depends on the amplitude of the vibration producing that sound. Greater is the amplitude of vibration, louder is the sound produced by it. if you find this answer helpful please rate positive thank you so much.
That light has a dual nature is referring to light: having energy and momentum. having high- or low-energy photons. acting as waves and particles. undergoing pair production.
Answer:
Option C, acting as waves and particles
Explanation:
Light has dual nature because it acts both as a wave and particle. It has high energy particle i.e photons and it also behave as an electromagnetic wave. This property of light is studied under the quantum mechanics. Einstein also proved that light is a stream of photons possessing both electrical and magnetic properties.
Hence, option C is correct
II. Magnetic fields Magnets and magnetic fields EM 115 We have observed that magnets interact even when they are not in direct contact. In electrostatics we used the idea of an electric field to account for the interaction between charges that were separated from one another. For magnetic interactions, we similarly define a magnetic field. A. Obtain a compass from a tutorial instructor. I. Use the compass to explore the region around a bar magnet. Describe the behavior of the compass needle both near the poles of the magnet and in the region between the poles.
Solution :
We all know that a bar magnet have two poles, the north pole and the south pole. These poles interacts with each other. The ends of the magnets having similar poles will push each other away while the poles with like charges will pull each others towards it.
The compass needle is also a magnet having south polarity as well as north polarity. When the compass needle is close to the bar magnet, it is opposite to the poles or along the poles. The compass needle shows the direction or is pointed towards the north. So when the compass needle is placed near the north pole of the bar magnet, the pointer of the compass needle points towards the north, i.e. it gets deflected because of he like charges. And when it is placed near the south pole of the magnet, it gets attracted towards it and is pointed towards the pole.
Now as we move the compass needle from the poles to the region that is between the poles, the compass needle pointer points towards the north direction every time. It show a deflection always. If we place the magnetic lines, we will see that the magnetic lines will exit from the north poles and enters the south pole of the bar magnet.
PLEASE HELPPPPPPP!!!!!!!!!!
Answer:
F' = 800 N
Explanation:
The electrical force between charges is 400 N.
The electrical force between two charges is given by :
[tex]F=k\dfrac{q_1q_2}{r^2}[/tex]
If q₁' = 2q₁, new force becomes,
[tex]F'=k\dfrac{q_1'q_2'}{r^2}\\\\F'=k\dfrac{2q_1\times q_2}{r^2}\\\\F'=2\times F\\\\F'=2\times 400\\\\F'=800\ N[/tex]
So, the new force becomes 800 N.
An electric field has a positive test charge of 5.00 C placed in it. The force on the test charge is
6.000 N. The magnitude of the electric field at the location of the test charge is
o 30.0 NVC
0 1.20 N/C
0 120, NVC
O 3.00 N/C
01.02 N/C
Answer:
yes
Explanation:
this means the answer is yes
According to Newton's second law, how are mass and acceleration related?
A. They are directly proportional to each other
B. They are inversely proportional to each other
Answer:
B. They are inversely proportional to each other
[tex] \frac{momentum}{time} = force \\ \\ \frac{mass \times velocity}{time} = force \\ \\ \frac{mass \times velocity}{time} = mass \times acceleration[/tex]
Will mark Brainliest!
All elements on the periodic table are neutral because they have the same number of electrons as what other particle?
A. Protons
B. Photons
C. Atomic mass
D. Neutrons
g A ball is tossed straight up from the surface of a small, spherical asteroid with no atmosphere. The ball rises to a height equal to the asteroid's radius and then falls straight down toward the surface of the asteroid. What forces, if any, act on the ball while it is on the way up
Answer:
Only a decreasing gravitational force that acts downward
Explanation:
The gravitational force is the gravitational pull which attract a mass of smaller size by the mass of a bigger size. It is the force which attract two masses close to each other.
In the context, when a ball is tossed up from the surface of an asteroid that have no atmosphere, the ball rises up and then falls back to the surface of the asteroid. The ball falls back because the gravitational pull of the asteroid pulls back the ball to its surface. Thus a decreasing gravitational force acts on the ball in the downward direction while the ball is in its way up.