The graph below shows the conservation of energy for a skydiver jumping out
of a plane and landing safely on the ground. Which energy is represented by
line C?

The Graph Below Shows The Conservation Of Energy For A Skydiver Jumping Outof A Plane And Landing Safely

Answers

Answer 1

Answer:

Kinetic energy

Explanation:


Related Questions

Consider a 4.80 kilogram feather (from a Big Bird) on Mars. Gravity on the surface of Mars is only about 38.0% of Earth's gravity.
What would the feather weigh on Earth?
If the feather dropped on you from a height, would it be better to be on Mars or the Earth?
What does the same feather weigh on Mars?

Answers

This feather weighs heavier on earth than on Mars hence it is better that the feather falls on you in Mars than on earth.

What is weight?

The term weight refers to the effect of the gravitational pull on an object. The acceleration due to gravity on earth is about 9.8m/s^2. The weight of this feather on earth is about 4.80 Kg *  9.8m/s^2 = 47 N

On the planet Mars, the weight is;

4.80 Kg * (0.38 * 9.8m/s^2) = 18 N

This feather weighs heavier on earth than on Mars hence it is better that the feather falls on you in Mars than on earth.

Learn more about gravity:https://brainly.com/question/4014727

#SPJ1

2069 (Set B) Q. No. 9d How much force is required to punch a hole 1 cm in diameter in a steel sheet 5mm thick whose shearing strength is 2.76 × 108 Nm 2. X [4]​

Answers

The force required to punch a hole 1 cm in diameter in a steel sheet is 0.176 x 10¹³ N.

What is force?

The force is defined as the shear stress or pressure applied per unit area.

F = P/A

Given is a steel sheet whose thickness t = 5mm = 5x 10⁻³ m, shearing strength P = 2.76 × 10⁸ N/m², diameter of hole d = 1cm = 1x 10⁻² m

The area to be punched A = πd xt

A = π x 1x 10⁻² x5x 10⁻³

A = 15.7 x 10⁻⁵ m²

The force required to punch a hole is

F = 2.76 × 10⁸ /  15.7 x 10⁻⁵

F = 0.176 x 10¹³ N.

Thus, the punching force is  0.176 x 10¹³ N.

Learn more about force.

https://brainly.com/question/21763500

#SPJ1

answer please help me ​

Answers

Answer:

It is showing the wavelength.

Explanation: Hope it helps you:)))

have a good day


A boy whirls a ball on a string 1.0 m long in a horizontal circle at 50 rpm. If the mass of the ball is 0.22 kg
What is the tension in the string?

Answers

Hi there! :)

We can begin by doing a summation of forces on the ball. In the horizontal direction, we have the force of tension:
[tex]F_{Net} = T[/tex]

The tension force results in a centripetal force experienced by the ball. The equation of centripetal force is equivalent to:
[tex]F_C = m\omega^2 r[/tex]

[tex]F_C[/tex] = Centripetal force (N)
m = mass of ball (0.22 kg)

ω = angular speed of ball(? rad/sec, must convert rpm to rad/sec)

r = radius/length of string (1.0 m)

We must begin by converting rpm to rad/sec:

[tex]\frac{50 rev}{min} * \frac{2\pi rad}{1 rev}* \frac{1 min}{60 sec} = 5.236 \frac{rad}{s}[/tex]

Now, we can set tension equal to the centripetal force and solve. [tex]T = F_{Net} = F_C\\\\T = m\omega^2 r\\\\T = (0.22)(5.236^2)(1) = \boxed{6.031 N}[/tex]

Calculate the amount of energy needed to boil away 1.6 L of water that initially has a temperature of 55 °C.

Answers

The amount of energy needed to boil away the water at the initial temperature  is 301,248 J.

Energy required to boil the water

The amount of energy needed to boil the water at the given is calculated as follows;

Q = mcΔθ

where;

m is mass of water

density of water = 1000 g/L

mass = density x volume

mass of water = 1000 g/L x 1.6 L = 1,600 g

Q = 1600 g x 4.184 J/g⁰C x (100⁰C - 55 ⁰C)

Q = 301,248 J

Learn more about heat capacity here: https://brainly.com/question/21406849

#SPJ1

A lamp with a resistance of 60 Ohms is plugged into a 110-Volt household circuit. How much current flows through the lamp?

Answers

The current flowing through the lamp is  1.833A

What is current?

The current is the stream of charges which flow inside the conductors when connected across the end of voltage.

From the Ohm's law, V =IR

Here, R is the proportionality constant called resistance of the resistor

A lamp with a resistance of 60 Ohms is plugged into a 110-Volt household circuit.

I = V/R

Put the values, we get

I = 110/60

I = 1.833A

Thus, the current flowing through the lamp is  1.833A

Learn more about current.

brainly.com/question/10677063

#SPJ1

You want to lift a heavy box with a mass L = 56.0 kg using the two-ideal pulley system as shown. With what minimum force do you have to pull down on the rope in order to lift the box at a constant velocity? One pulley is attached to the ceiling and one to the box.

Answers

The minimum force required to lift the box at constant velocity is determined as 274.4 N.

Minimum force required

The minimum force required to lift the box at constant velocity is the tension in one of the pulleys, and the magnitude is calculated as follows;

2T = mg

where;

m is mass of the boxT is the minimum force required

2T = mg

T = mg/2

T = (56 x 9.8)/2

T = 274.4 N

Learn more about minimum force here: https://brainly.in/question/47873510

#SPJ1

The driver of a car moving at 96.0 km/h receives a text message on his cellphone. If
it takes him 6.7 seconds to read and respond to the message. How many meters
does he drive during this time?

Answers

Answer:

179 m

Explanation:

Given:

v₀ = 96.0 km/h × (1000 m/km) × (1 h / 3600 s) = 26.67 m/s

a = 0 m/s²

t = 6.7 s

Find: Δx

Δx = v₀ t + ½ at²

Δx = (26.67 m/s) (6.7 s) + ½ (0 m/s²) (6.7 s)²

Δx = 179 m

Electromagnets show the interaction of

a. electric current and electric
charges

b. electric charges and magnetic
dipoles

c. magnetic fields and iron filings

d. magnetic fields and electric
currents

Answers

Answer:

B

Explanation:

Electric charges and magnetic dipoles


One of the possible criteria of Schizophrenia is hallucinations.
Select one:
O True
O False

Answers

It is true but that’s not Physics

What is tan for the given triangle?

Answers

Answer:

tan is 15 for that triangle

Answer:

c. 1.33

Explanation:

edmentum

what is dipersion of light

Answers

Answer:

The separation of visible light into its different colors is known as dispersion. It was mentioned in the Light and Color unit that each color is characteristic of a distinct wave frequency; and different frequencies of light waves will bend varying amounts upon passage through a prism

Explanation:

The radius of a nucleus is about 1/10000 that of an atom.

Calculate the radius of a magnesium nucleus.
Give your answer in standard form.

Answers

The radius of a magnesium atom is 0.160nm. The radius of a nucleus is about 1/10000 that of an atom.

What is nucleus?

The nucleus is an organelle that contains the DNA i.e. genetic material and other materials which is required for cellular processes. It is only found in eukaryotic cells that is responsible for controlling the processes of the cell.

So we can conclude that the radius of a magnesium atom is 0.160nm which is equals to about 1/10000 radius of that atom.

Learn more about radius here: https://brainly.com/question/24375372

#SPJ1

a body covers a distance of 20 m in 2 second and then covers 40 metre in next it s8 on a straight line calculate its velocity​

Answers

Answer:

6 m/s

Explanation:

Average velocity = Total distance covered / Time taken to cover distance

Finding Average Velocity :

⇒ 20 m + 40 m / 2 s + 8 s

⇒ 60 m / 10 s

6 m/s

Velocity

a body covers a distance of 20 m in 2 second and then covers 40 metre in next it s8 on a straight line calculate its velocity.

Solution:

AV = 20m + 40m/s 2s + 8secondAV = 60m/s ÷ 10sAV = 6m/s²

So the Average velocity is 6m/s²

How is gravity involved in the formation of stars?

Answers

How is gravity involved in the formation of stars?

the given vector A=0.3i+0.4j+Bk is a unit vector the value of B is?​

Answers

Explanation:

We know that,

Magnitude of a unit vector is 1.

and, magnitude of a vector in the form [tex] \sf a \hat{i}+b \hat{j} + c \hat{k} [/tex]

is [tex] \sf \sqrt{a^2+b^2+c^2 } [/tex]

The given vector is,

[tex]\sf \vec{A}= 0.3 \hat{i} + 0.4 \hat{j} + B \hat{k}[/tex]

Magnitude of the given vector is,

[tex]\sf | \vec{A}|= \sqrt{(0.3)^2+(0.4)^2+B^2} =1[/tex]

[tex]\sf \sqrt{0.09+0.16+B^2}=1[/tex]

[tex]\sf 0.25+B^2=1[/tex]

[tex]\sf B^2=1-0.25=0.75[/tex]

[tex]\sf B = \sqrt{0.75} ≈ 0.87[/tex]

A rocket is fired with an initial velocity of 100m/s at an angle of 550 above the horizontal. It explodes on the mountain side 12s after its firing. What is the x-and y- coordinates of the rocket relative to its firing point?​

Answers

The rocket's x- and y-coordinates relative to its launching point will be -0.975 and -0.219 m/sec, respectively.

What is velocity?

The change of displacement with respect to time is defined as the velocity.  Velocity is a vector quantity. it is a time-based component.

Velocity at any angle is resolved to get its component of x and y-direction.

Given data;

V = 100m/s

θ=550°

t= 142 sec

The given velocity is resolved into the component as:

[tex]\rm V_X=Vcos \theta \\\\ V_y = Vsin\theta[/tex]

The x coordinate of the rocket:

[tex]\rm V_x = 100 cos \ 550^0 \\\\ V_x = -0.975616[/tex]

The y coordinate of the rocket:

[tex]\rm V_y =100 sin \ 550^0 \\\\ V_y = -0.219484[/tex]

Hence, the x-and y- coordinates of the rocket relative to its firing point will be -0.975 and -0.219 m/sec.

To learn more about the velocity refer to the link ;

https://brainly.com/question/862972

#SPJ1

Iron is attracted to magnets and rusts when in the presence of oxygen. Which is true about these properties of iron?

Answers

Iron forms an oxide when exposed to air is a true property about this element.

What is Iron?

This is an element which has magnetic properties and forms an oxide when exposed to air.

Iron forms ferric oxide in the presence of oxygen which is the brown like color seen in the form of rust.

Read more about Iron here vhttps://brainly.com/question/14964747

#SPJ1

?How much work is done by 5 kg water as it is evaporated at 10 bar pressure​

Answers

Answer:

The (latent) heat of vaporization (∆Hvap) also known as the enthalpy of vaporization or evaporation, is the amount of energy (enthalpy) that must be added to a liquid substance, to transform a given quantity of the substance into a gas.

The enthalpy of vaporization is a function of the pressure at which that transformation takes place. The heat of vaporization diminishes with increasing temperature and it vanishes completely at a certain point called the critical temperature (Critical temperature for water: 373.946 °C  or 705.103 °F,  Critical pressure: 220.6 bar = 22.06 MPa  = 3200 psi ).

The mass of a piece of gold is 57 g and its volume is 3 cm³. What is its
density?
A 15 g/cm³
B. 54 g/cm³
C. 14 g/cm³
OD. 19 g/cm³

Answers

Using the formula of density, mass/volume
57/3 = 19g/cm^3

The answer is D

How do light waves differ from sound waves?

Answers

Answer:

Light waves are electromagnetic waves while sound waves are mechanical waves. :)

Light waves are electromagnetic. And, sound waves are mechanical.
Hope this helps! :)

In a typically constructed research study, the experimental group is selected:
A. after selecting the control group.
B. systematically.
C. through random selection.
D. from a separate pool than is the control group.

Answers

Answer:

D. from a separate pool than is the control group.

Explanation:

in the picture the person answers is backwards but...

hope this helps have a nice day

Calculate the work done by a force of 30 N in lifting a load of 2 kg to a height of 10 m (g = 10 m/s2)

F=mg
F= 2 (kg) × 10 (m/s2) = 20 N
W= Fd = mgh
W= 20 × 10 = 200 J

Guys, please answer. If the relationship gives a product of 20 N, why is 30 N in the question?​

Answers

Answer:

300 J

Explanation:

Given :

Applied force = 30 NMass = 2 kgHeight = 10 mg = 10 m/s²

Work done by the force :

Work done = Force x DisplacementWork done = mg x hWork done = 30 N x 10 mWork done = 300 J

Note :

What you have calculated is the work done by gravitational force on the object (that too, incorrectly)But in the end, it asks for work done by the force of 30NHence, the given answer ~

Tearing of paper is said to be a change that cannot be reversed. What about paper recycling? Explain.

BEST ANSWER WILL BE MARKED

Answers

Answer:

Recycling of paper cannot be reversed thus making it an irreversible change

Explanation:

When we recycle paper an entirely new product can be made which cannot be changed back to paper

Ampère placed two 1.50-m wires parallel to each other so that they were 4.80 cm apart.
He delivered a current of 6.50 A to the wires. Both wires experienced an external
magnetic field of 2.71 X 10^−5 T. Determine the force on one of the wires.

Answers

The force on one of the wires is determined as 1.76 x 10⁻⁴ N/m.

Force on the wire

The force between the two parallel wire is calculated as follows;

F = μI²L/2πr

where;

I is the current in the two wiresL is length of the wiresr is the distance between the wires

F = (4π x 10⁻⁷ x 6.5² x 1.5)/(2π x 0.048)

F = 2.64 x 10⁻⁴ N

Force per unit length of the wire

F/L =  2.64 x 10⁻⁴ N / 1.5

F/L = 1.76 x 10⁻⁴ N/m

Thus, the force on one of the wires is determined as 1.76 x 10⁻⁴ N/m.

Learn more about force here: https://brainly.com/question/12970081

#SPJ1

Why would you expect a person with impairment of the organs of equilibrium to become more unsteady when the eyes are closed?

Answers

Answer:

A person with impairment of organs of equilibrium would compensate for their lack of sensory information by their eyes therefore if their eyes are closed they aren't able to sense their location in space accurately (Proprioception)

Explanation:

Explain four different types of fitness technologies that are used to help improve your fitness level.

Answers

Answer: endurance, strength, balance, flexibility

Explanation:

walking, jogging, swimming, biking

The constant 40-N force is applied to the 36-kg stepped cylinder as shown. The centroidal radius of gyration of the cylinder is k = 200 mm, and it rolls on the incline without slipping. If the cylinder is at rest when the force is first ap- plied, determine its angular velocity weight seconds later.

Answers

The angular velocity of the stepped cylinder is determined as 2.35 rad/s.

Centripetal acceleration of the cylinder

The centripetal acceleration of the cylinder is calculated as follows;

F = ma

a = F/m

a = 40/ 36

a = 1.11 m/s²

Velocity of the cylinder

a = v²/r

v² = ar

v² = 1.11 x 0.2

v² = 0.222

v = 0.47 m/s

Angular velocity of the cylinder

v = ωr

ω = v/r

ω = 0.47/0.2

ω = 2.35 rad/s

Learn more about angular velocity here: https://brainly.com/question/6860269

#SPJ1

1. What are the two factors affecting friction

Answers

Answer: a.) Roughness of the surfaces in contact with each other .
Higher the roughness of surfaces in contact with each other, greater is the friction between bodies. Force of friction will be less between smooth surfaces.

b.) Weight of the sliding/rolling body: greater the weight of the moving body on the surface, more is the force of friction on the body by the surface.

I hope this helps

The chemical symbol for the element carbon ‘ aluminum hydrogen ‘oxygen and sodium

Answers

ANSWER:

C = carbon

Al = aluminium

H = hydrogen

O = oxygen

Na = sodium

I hope it helps u dear (^^)

Other Questions
The owner adds a chemical to the tank to keep the water clear. the instructions say to add 5 cubic centimeters of chemical for every 80,000 cubic centimeters of water. how much chemical will need to be added? round your answer to the nearest tenth if necessary. When we say, I see, what do we mean? How many ways are there to see - or fail to see - the world? Solve for x........................................................... Question 4 of 35When moving a patient from bed to wheelchair, which technique should you avoid at all times? This story is written for entertainment purposes. Which sentence from the passage best supports the authors purpose for writing? What is one advantage of maintaining a good credit score?OA. It lets lenders know that you are reliable in paying your debts.B. It lets creditors know how much you can pay back in a month.OC. It lets creditors know how much you earn per paycheck.OD. It lets you skip payments whenever you want to. y-intercept: 4 -: x-intercepts: -2, 5, 7 -: Relative maximum at (0,4) -: Relative maximum at (6, -3) -: As , -: As , Which graph shows the solution to the following system of inequalities x+y>4 The image below depicts which event during WWII? True or False: explicit meaning is what the text implies, whereas inferred meaning is what the text says outright with no need for interpretation. What are the coefficients for the binomial expansion of (p q)6? 1, 8, 28, 56, 70, 56, 28, 8, 1 1, 6, 15, 20, 15, 6, 1 1, 5, 10, 10, 5, 1 1, 4, 6, 4, 1 Write a doubles fact that can help you find thesum. Write the sum.3+4 what are the missing values rascal unrest occur in _______ over the issue of _______ in the 1970.a, New York , voting rightsb, Jackson, Lynching c, Boston , busing d, Pittsburgh , equal employment e, none of the above help Compose a three (3) stanza jingle about Preventing Non-Communicable Diseases. PA ANSWER PO PLSS How did the Academy of San Carlos influence Mexican artists before the Mexican Revolution? How did the academy's teaching restrict the development of a national artistic and cultural identity? A malicious actor is preparing a script to run with an excel spreadsheet as soon as the target opens the file. the script includes a few macros designed to secretly gather and send information to a remote server. how is the malicious actor accomplishing this task Q 29.1 a sheet of copper is placed between the poles of an electromagnet with the magnetic field perpendicular to the sheet. when the sheet is pulled out, a considerable force is required, and the force required increases with speed. explain. is a force required also when the sheet is inserted between the poles? explain. a circle has a circumference of 28 centimeters. if an arc subtends a central angle of 55 degrees, what is the arc length? Llena los espacios en los siguientes prrafos usando los verbos Ir y Ser conjugados en el tiempo pretrito.