The driver of a car traveling at 30.2 m/s applies the brakes and undergoes a constant deceleration of 1.4 m/s 2 . How many revolutions does each tire make before the car comes to a stop, assuming that the car does not skid and that the tires have radii of 0.37 m

As air is blowing across the top of a soft drink bottle, it reverberates. The frequency grows as the chamber's length lengthens.

The frequency of physics is the number of waves that pass by a specific location in a time period. According to this concept, how several cycles or waves do a body in periodical motion experience in a single unit of time?

The distance between normal incidence (adjacent crests) in adjacent cycles determines how far a waveform signal has traveled in place or over a wire. In wireless systems, this length is often expressed in metres (m), centimeters (cm), or millimeters (mm) (mm).

Therefore, As air is blown, a soda pop bottle reverberates.

Learn more about frequency from the given link.

https://brainly.com/question/10728818

#SPJ4

The battery current is I=9.14A

As per the details share in the above question are as bellow,

The details provided are,

Let us suppose that the current I is flowing through the battery.

The resistor are connected in parallel. i.e

[tex]$3 \Omega$[/tex] and [tex]$5 \Omega$[/tex].

Hence,

[tex]3 \Omega \| 5 \Omega & =\frac{3 \Omega \times 5 \Omega}{3 \Omega+5 \Omega}[/tex]

Further solving it we get,

[tex]& =\frac{15}{8} \Omega[/tex]

The resistor are connected in parallel. i.e

[tex]$3 \Omega$[/tex] and [tex]$1 \Omega$[/tex] .

Hence,

[tex]3 \Omega \| 1 \Omega & =\frac{3 \Omega \times 1 \Omega}{3 \Omega+1 \Omega}[/tex]

Further solving it we get,

[tex]& =\frac{3}{4} \Omega[/tex]

The series sum of the total equivalent resistance is  [tex]\frac{15}{8}[/tex]Ωand [tex]$\frac{3}{4} \Omega$[/tex] resistors.

[tex]R_{e q} & =\frac{15}{8} \Omega+\frac{3}{4} \Omega \\[/tex]

Adding the rational number we get,

[tex]& =\frac{15+6}{8}[/tex]

Further solving it we get,

[tex]& =\frac{21}{8} \Omega[/tex]

Identify the battery current value.

[tex]& \mathrm{I}=\frac{V}{R_{e q}}[/tex]

Substitute the value in above equation we get,

[tex]& \mathrm{I}=\frac{24}{\left(\frac{21}{8}\right)}[/tex]

Further solving it we get,

I=9.14A

For such more question on battery current.

https://brainly.com/question/5059264

#SPJ4

Note: The diagram of the question is added bellow,

Stage and film versions of a drama are similar in that the audience must use context clues such as lighting, sound effects, and dialogue to infer the mood of a scene. This requires the audience to pay attention to the details of the performance, as subtle changes in these elements can drastically change the overall tone of the production.

The main difference between a stage and film version of a drama is that a stage production relies heavily on the physicality of the actors and their interactions with one another, while a film production relies heavily on the technical aspects such as camera angles, lighting, and sound design. Additionally, a stage production is performed live in front of an audience, while a film is created in a studio and viewed later by an audience.

Learn more about film versions:

https://brainly.com/question/20500638

#SPJ4

The angle turned in 5.26 s is 6470 degrees. An initial angular speed of 12.5 rad/s and a constant angular acceleration of 3.41 rad/s2 are the characteristics of a pulley.

The angular acceleration provides the rate of change of angular velocity, just like in the case of linear velocity and acceleration: The rate at which the angular velocity varies is determined by the angular acceleration's magnitude, and the change's direction is determined by the direction.

The rate at which angular velocity changes is referred to as angular acceleration. In an equation, angular acceleration is written as follows: = t, where t is the change in time and is the change in angular velocity.

To know more about angle turned visit:

brainly.com/question/29160335

#SPJ4

According to the given statement The temperature of the air in this experiment is dependent variable.

Material refers to a thing that something else is made out of. Material can also refer to cloth or can be used to describe something that is made of matter and exists in the physical world. Material has many other senses as a noun and an adjective.

A material is any substance that an object is made from. Glass, chalk, paper, wax, water, air, clay and plastic are all different materials. All materials are made up of matter.

To know more about material visit:

brainly.com/question/9176437

#SPJ4

The value of Young's modulus will be 6.78*10^8 N/m^2

Linear elastic solid materials have a mechanical characteristic called Young's modulus (Y), which is also referred to as the elastic modulus. It explains how strain (proportional deformation) and stress (force per unit area) interact with one another in a material.

The stiffness of a solid or its resistance to elastic deformation under stress is measured by the Young's modulus (E or Y). It connects strain (proportional deformation) along an axis or line to stress (force per unit area).

Given elongation delta L=1.10 m

Mass of A=65.0 kg,

L=45.0 m

D=7 mm

radius =  r=7/2=3.5 mm

Since we know the Young's Modulus (Y) Can be defines as [tex]Y=\frac{\text { stress }}{\text { strain }}=\frac{\mathrm{F} / \mathrm{A}}{\Delta l / L}[/tex]

Now, (4/{L)=(1.10 m/45.0 m)=0.0244

[tex]\begin{aligned}\ \frac{F}{A}=\frac{M g}{A} & =\frac{65 \mathrm{~kg} \times 9.8 \mathrm{~m} / \mathrm{sec}^2}{\pi r^2} \\& =\frac{65 \mathrm{~g} \times 9.8 \mathrm{~m} / \mathrm{sec}^2}{3.14 \times\left(3.5 \times 10^{-3}\right)^2} \\& =\frac{65 \times 9.8}{3.14 \times 12.25 \times 10^{-6}} \mathrm{~N} / \mathrm{m}^2 \\& =\frac{637}{38.465} \times 10^6 \mathrm{~N} / \mathrm{m}^2 \\\frac{F}{A} & =16.56 \times 10^6 \mathrm{~N} / \mathrm{m}^2\end{aligned}$$[/tex]

Therefore, the value of Young's modulus will be

[tex]$$\begin{aligned}& Y=\frac{F / A}{\Delta l / L}=\frac{16.56 \times 10^{-6} \mathrm{~N} / \mathrm{m}^2}{0.0244}=\left(678.688 \times 10^6\right) \mathrm{N} / \mathrm{m}^2 \\& Y=6.78 \times 10^8 \mathrm{~N} / \mathrm{m}^2\end{aligned}$$[/tex]

For more questions on Young's modulus

https://brainly.com/question/28757637

#SPJ4

Option (a) is correct- The car has about 42% greater momentum than the SUV.

What is momentum ?

As a measure of an object's kinetic energy, momentum is easily defined. Simply put, momentum is the result of mass times velocity. full response Simply said, momentum is concerned with the quantity of motion. The conserved quantity is another definition for it.

What is mass?

Measurement of inertia, a fundamental characteristic of all matter. The resistance a body of matter offers to a change in its speed or location as a result of the application of a force is what it is in essence.

Therefore, Option (a) is correct- The car has about 42% greater momentum than the SUV.

Learn more about momentum from the given link.

https://brainly.com/question/402617

#SPJ4

Graphite: according to table 1, which of the following materials is the poorest electrical conductor.

What is conductor?

Conductor is an electrical device or material that is capable of allowing electric current to flow through it. It is used in a variety of applications ranging from wiring in buildings to the transmission of electricity over large distances.

Conductors are typically made from metals, such as copper and aluminum, but certain types of materials, such as semiconductors, can also act as conductors.

To learn about more What is conductor.

https://brainly.com/question/24154868

#SPJ4

This situation breaks Newton's Second Law of motion which states that for every action there is an equal and opposite reaction.

It could have been ideal if the force exerted on the bus by superman should also be exerted on superman by the bus because if we use the equation F=m*a, since superman's mass is so much less than the mass of the bus, he should experience a much higher acceleration than the bus does.

Newton's second law is a quantitative description of the changes that a force can produce on the motion of a body and it states that the time rate of change of the momentum of a body is equal in both magnitude and direction to the force imposed on it.

Newton’s second law is one of the most important in all of physics. For a body whose mass m is constant, it can be written in the form F = ma, where F (force) and a (acceleration) are both vector quantities.

Learn more about Newton’s second law at: https://brainly.com/question/25545050

#SPJ1

Both of you have the same amount of potential energy since your masses are the same.

In physics, potential energy is the power that a substance retains as a result of its position in respect to other things, internal pressures, electric charge, or other substances. Potential energy is a type of stored energy that depends on the interactions of various system elements.

The potential energy of a spring rises when it is crushed or stretched. The potential energy of a steel ball increases if it is raised above the ground as opposed to falling to it. Potential energy is the name for the energy that exists in everything that is raised from rest and can be released at a later time.

To learn more about potential energy visit:

brainly.com/question/24284560

#SPJ4

He accomplished no job. When Taylor's car broke down, he attempted to push it with 8,000 newtons of force before giving up and calling a tow truck.

The mechanical advantage is how many times a machine can multiply the force of the effort. The mechanical advantage of the machine increases when the effort force is exerted across a bigger distance.

Force multipliers are tools that lessen the force required to move an object. Force multipliers come in handy when lifting heavy objects or performing other actions that call for a lot of force.

To know more about force visit:-

https://brainly.com/question/13191643

#SPJ4

The changes in the momentum of the ball and the time over which that change occurs. The formula for average force is: average force = change in momentum/time.

Given: The ball's mass is 0.144 kilogram.

speed v = 38 m/s, shift in momentum presently

P = m v- ( - mv) ( - mv)= 2 mv

=2 x (0.144) x (38) (38)

= 10.944 kg-m/s

t Impulse J=F.

The impulse is equivalent to the change in momentum.

J = 10.944 kg-m/s

Think about how a baseball bat and a ball interact, for instance. The bat forces the ball to the right while the baseball forces the bat to the left. The action-reaction force pair is made up of these two forces acting on two different objects combined.

to know more about force here:

https://brainly.com/question/29781083

#SPJ4

Pitch a baseball horizontally at 38.0 m/s weighing 0.144 kg. The baseball moves in the opposite direction and at the same speed after being struck by the bat. What is the ball's change in momentum? What kind of impetus does the bat deliver? What was the average force the bat applied to the ball during the 0.80 milliseconds that they were in contact?

Torque is produced by multiplying the length of a lever arm by the force acting perpendicular to the lever arm. There are two conceivable orientations for the scalar quantity torque: clockwise and anticlockwise.

A torque is created when a force is applied perpendicular to a lever arm. The lever arm or moment arm is the length that extends perpendicularly from the pivot point, or the centre of rotation, to the point at which the force is applied. A torque is always defined with reference to a pivot point.

A torque multiplier multiplies the torque applied to the bolt with each gearing level. For instance, a 5:1 torque multiplier will result in an output.For example, a torque multiplier with a 5:1 ratio will result in an output at the shaft that is five times the torque, but the speed will only be one fifth of the original since no energy can be created.

For more such question on torque and force.

https://brainly.com/question/17512177

#SPJ4

51.6 seconds long does it take a plane, traveling at a constant speed of 130 m/s, to fly once around a circle whose radius is 2650 m.

The time it takes for an object to travel once around a circle of radius r at a constant speed v can be found using the equation:

T = 2 x π x r ÷ v

where T is the time in seconds, pi is approximately 3.14, r is the radius of the circle in meters, and v is the speed of the object in meters per second.

Given a constant speed of 130 m/s and a radius of 2650 m, the time it would take for a plane to fly once around the circle would be:

T = 2 x π x 2650 m / 130 m/s

T = 51.6 sec

So, it would take approximately 51.6 seconds for a plane traveling at a constant speed of 130 m/s to fly once around a circle whose radius is 2650 m.

To know more about speed please refer: https://brainly.com/question/13608672

#SPJ4

13824 x 10^3 J electrical energy is converted to light and thermal energy by a 160 w light bulb in one day

Thermal energy is the movement of the molecules within an object or substance. Every material has heat energy; the sun is the primary thermal energy source in our solar system. The transfer of thermal energy through one material or item to another is known as heat.

Given,

Power = P = 160 W

time = t = 1 day = 24 hours = 24 x 3600 sec = 86400 sec

energy = power x time = 160 x 86400 = 13824 x 10^3 J

To know more about thermal energy visit:

brainly.com/question/11278589

#SPJ4

When it comes to frequency, a 2.3 MHz ultrasonic wave's characteristic does not alter while it travels through human tissues.

The frequency of a wave is the number of oscillations it performs in a second. It's calibrated in hertz (Hz). The number of waves that pass a specific place in a predetermined period of time is known as wave frequency. The hertz (Hz) is the SI unit for wave frequency, and 1 hertz is equivalent to 1 wave crossing a fixed point in 1 second. A wave with a higher frequency has more energy than a wave with a lower frequency of the same amplitude.

As a result, a wave's frequency is unaffected by the medium through which it travels.

To know more about the Frequency of a wave, refer to this link:

https://brainly.com/question/14316711

#SPJ4

A) Using algebra, the required speed V=(2gh)1/2

B)  With the no friction, the final speed does not  depend on the mass of the car.

C) With no friction, the final speed does depend on the steepness of the hill.

D) The final speed of the car if the height of the hill is 55 cm is 3.569 m/s.

Given that there is no friction considered. Thus, the total energy of the system can be considered as conserved.

Thus, sum of kinetic and potential energy will be constant.

K = U

mu 2   = mgh ......................................(1)

m = mass of object

v = speed of object

g = acceleration due to gravity = 9.8 m/s2

h = height of object with respect to a reference position

Thus for an object at a height from ground, will have its potential energy converted to kinetic energy during it's descent.

(A) from (1)

mv2 = 2mgh

Thus,   v2 = 2gh

            v = (2gh)1/2

this, is the velocity of an object from conservation of energy.

(B) with no friction, the enrgy is taken to be conserved. from the answer of (A), we know,

v = (2gh)1/2.

clearly this equation doesn't depend on mass.

thus, final speed doesn't depend on the mass.

(C) Given height of hill , h = 65cm = 0.65 m

from (1),    v = (2gh)1/2.

the potential energy of car at the hill top = mgh

this potential energy gets entirely converted to kinetic energy at the bottom of hill due to conservation of energy. Thus

v = (2 x 9.8 x 0.65)1/2

   =  3.569 m/s

Thus, the final velocity of the car is 3.569 m/s

To know more about friction here

https://brainly.com/question/31226

#SPJ4

A boy weighing 40 kg jumps off a 600 kg raft horizontally. If the youngster is leaving the raft at a velocity of 4.0 m/s, the raft will be moving at a speed of 0.26 m/s.

The conservation of linear momentum is a general law of physics that states that no single item, or system of objects, experiences a change in the quantity called momentum that describes motion. Momentum is the force needed to stop an item moving at a certain speed in a given amount of time. It is calculated by multiplying an object's mass by its velocity.

Given,

mass of the boy (m₁) = 40 kg

mass of the raft (m₂) = 600 kg

speed of the boy (u₁) = 4 m/s

We have to find out the speed of the raft (u₂)

By conservation of linear momentum, We get

m₁u₁ = m₂u₂

⇒ u₂ = (m₁ ₓ u₁)/m₂

⇒ u₂ = (40*4)/600

⇒ u₂ = 0.26 m/s

Learn more about Velocity:

brainly.com/question/18084516

#SPJ4

The quantity of charge on a plastic tube that has been rubbed with animal fur and gained 3. 8 x 10^9 electrons is The quantity of charge on the plastic tube is 3.8 x 10^9 electrons.

The quantity of charge on the plastic tube is 3.8 x 10^9 electrons. To calculate this value, we can use the equation q = n*e, where q is the charge, n is the number of electrons and e is the elementary charge (1.6 x 10^-19 C). Substituting in the values given, we get q = 3.8 x 10^9 * 1.6 x 10^-19 = 6.08 x 10^-10 C.  This means that the plastic tube has gained a charge of 6.08 x 10^-10 Coulombs, which is equivalent to 3.8 x 10^9 electrons.

This can be explained by the process of triboelectricity, which is the transfer of electrons between two materials due to rubbing them together. In this case, the animal fur must have had a higher electron affinity than the plastic, which caused electrons to be transferred from the fur to the plastic tube.

To know more about electrons refer to the  link  brainly.com/question/1255220

#SPJ4

The rate at which an object's position changes when observed from a specific point of view and when measured against a specific unit of time is known as its velocity.

Velocity is the direction at which an object is moving and serves as a measure of the rate at which its position is changing as seen from a specific point of view and as measured by a specific unit of time (for example, 60 km/h northbound).

By dividing the amount of time it took the object to go a certain distance by the overall distance, one can calculate the object's initial velocity. V is the velocity, d is the distance, and t is the time in the equation V = d/t.

An object's velocity can alter depending on whether it moves faster or slower or in a different direction. An object can move faster, slower, or remain stationary by being pushed or pulled in one direction or the other. Or to put it another way, a thing moves because of a force. Gravity and friction both act as sorts of forces that affect how an object moves.

Therefore, the correct answers are:

a) 75 m/s

b) 1.4 x 103m/s2

c) 2.8 x 103N

d) 75 m/s tangential object flight.

To learn more about velocity refer to:

https://brainly.com/question/25749514

#SPJ1

It will take 1.5 seconds for Marissa's car to accelerate from 26. 4 m/s to 28. 6 m/s.

Acceleration can be calculated by looking at the change in velocity over a specific period of time. It is an important concept in physics as it is used to explain the motion of objects in the real world.

Acceleration is a measure of how quickly an object is changing its velocity on average, and it is usually expressed in meters per second squared (m/s2).

This simple calculation of Marissa's car acceleration can be determined by using the formula: Delta speed / Acceleration rate = Time taken.

In this case, that would be 2.2 m/s (28.6-26.4) / 3.6 m/s2

= 0.6 s or 1.5 sec (rounded up).

To learn more about car, click here:

https://brainly.com/question/19385703

#SPJ4

The energy efficiency of converting the oil into the light can be calculated by multiplying the efficiencies of each step in the process.

Efficiency = (0.50) * (0.25) = 0.125 or 12.5%

So the energy efficiency of converting petroleum oil into the light is 12.5%. This means that only 12.5% of the energy in the oil is converted into usable light. The rest is lost as heat or other forms of energy during the process.

How effective is the process of turning oil into light overall? Chemical energy equivalent to 6,000 MJ is found in one barrel of crude oil. An oil-burning power plant can produce 2,000 MJ of energy from a single barrel of crude oil.

to know more about energy efficiency here:

brainly.com/question/28939461

#SPJ4

The orbital speed of Dactyl is approximately 0.0173 meters per second.

To calculate the orbital speed of a Dactyl, we can use the formula:

v = √(G * M / r) where:

So, v = √( (6.67 x 10^-11 N*(m^2)/(kg^2)) * (4.5 x 10^16 kg) / (90 x 10^3 m) )

        = √ ( 2.98 x 10^-5 m/s^2 )

        = 0.0173 m/s

Therefore, the orbital speed of Dactyl is approximately 0.0173 meters per second.

Learn more about orbital speed here:

https://brainly.com/question/22247460

#SPJ4

The number of wavelengths increases corresponding to the orbital number of the shell.

The quantum mechanical model of atoms represents the three-dimensional location of the electron in a probabilistic manner using a mathematical function known as a wavefunction, which is sometimes denoted as. Orbitals are another name for atomic wavefunctions. The wavefunction's squared magnitude reflects the probability distribution of locating the electron in a certain region of space. As a result, atomic orbitals characterize the regions of an atom that are most likely to contain electrons. Three quantum numbers characterize an atomic orbital. Any positive integer can be used as the primary quantum number, n. n is connected to the general region for orbital energy value and the average distance of an electron from the nucleus. 

We can learn more about orbital number here:

https://brainly.com/question/5087295#

#SPJ4

If two blocks are connected by a string of negligible mass that passes over massless pulleys, the system can be analyzed using the principles of Newton's second law and the conservation of energy.

To learn more about newtons second law refer:

brainly.com/question/25545050

#SPJ4

The total energy of the skier at the beginning of the slope is 63360 J.

Total energy is the sum of all the energies of a system, including thermal, mechanical, electrical, and chemical. It is the measure of the capacity of a system to do work. It can be expressed as the product of the mass of the system and its velocity squared.

The kinetic energy of the skier at the beginning of the slope is given by the equation KE = .5mv^2, where m is the mass of the skier (in kilograms) and v is the velocity of the skier (in meters per second).

The kinetic energy at the beginning of the slope is (0.5)(72kg)(0m/s)^2 = 0 J. Since the skier was 90 meters high, we can assume a gravitational potential energy of (90m)(9.8m/s^2)(72kg) = 63360 J.

Therefore, the total energy of the skier at the beginning of the slope is 63360 J.

At the end of the slope, the skier converts the energy into sound and heat energy. The sound energy of 64 J is given. Therefore, the heat energy must be 63360 - 64 = 63296 J. This is the amount of energy converted to heat energy from the collision.

To learn more about total energy
https://brainly.com/question/8101588
#SPJ1

Answer:

Mechanical energy.

Explanation:

Mechanical energy is the energy that is possessed by an object due to its motion or due to its position. Mechanical energy can be either kinetic energy or potential energy.

The mass of the pilot flying a small plane is 75.74 kg.

Centripetal acceleration is a characteristic of an object's motion along a circular path. Centripetal acceleration applies to any item travelling in a circle with an acceleration vector pointing in the direction of the circle's center.

Speed of the small plane: v = 130 m/s.

Radius of circular path: r = 400 meter.

Hence, centripetal acceleration: a = v²/r = (130)²/400  m/s² = 42.25 m/s²

Required force: F = 3200 N.

Hence, from Newton's 2nd law of motion:

The pilot's mass  = force/acceleration

= 3200/42.25 kg

= 75.74 kg.

Learn centripetal acceleration here:

https://brainly.com/question/14465119

#SPJ1

The acceleration of the particle at t=0 is zero because the particle is in rest position and did not moving at any of the instance or travelling at an uniform speed through out the whole journey or yet did not start from the source point.

Acceleration is the rate of change of velocity. At any point on a trajectory, the magnitude of the acceleration is given by the rate of change of velocity in both magnitude and direction. Acceleration of the body that we can consider is the increasing value of the velocity of any object at a constant rate and that of wee can calculate. Hence by the primary information that we have we can formerly consider that the acceleration which is acting on the particle at t=0 is zero because the particle is in rest position and did not moving at any of the instance or travelling at an uniform speed through out the whole journey or yet did not start from the source point.

Learn more about Acceleration:

brainly.com/question/21509870

#SPJ4

Based on the age of the light- and dark-colored regions of the Moon and the number of craters observed in these regions, we know that impacts in the inner Solar System rapidly decreased approximately 3 billion years ago.

The light-colored areas of the Moon's surface are roughly 1 billion years older than the dark-colored regions.

The dark patches are basalt-based juvenile plains known as maria. The basalt poured in and inundated the region left by a massive asteroid or comet collision. The bright regions are the highlands, which are raised mountains caused by impacts.

The light-colored material is found in portions of the Moon known as the highlands, which represent the Moon's oldest crust.

The lunar highlands are the earliest lunar features. This is mostly determined by the amount of impact craters found in various locations of the moon.

For more questions on Solar System

https://brainly.com/question/1286910

#SPJ4