The coil's average induced emf is 3.92 volts.
How to calculate average induced emf?The average induced emf in the coil can be calculated using Faraday's law of electromagnetic induction, which states that the induced emf is equal to the rate of change of magnetic flux through the coil.
The magnetic flux through the coil is given by:
Φ = BA cos θ
where B is the magnetic field, A is the area of the coil, and θ is the angle between the magnetic field and the normal to the plane of the coil.
In this case, θ = 90°, so cos θ = 0.
Therefore, Φ = BA cos θ = 0.
When the magnetic field reverses direction, the magnetic flux through the coil changes at a rate of:
ΔΦ/Δt = BA/Δt
where Δt is the time for the magnetic field to reverse direction.
The induced emf is then:
ε = - ΔΦ/Δt
where the negative sign indicates that the emf is induced in such a way as to oppose the change in magnetic flux.
Substituting the given values:
ε = - (BA/Δt) = - [(0.35 T)(3.8×10⁻² m²)/(0.34 s)] = - 3.92 V
Therefore, the average induced emf in the coil is 3.92 volts.
Find out more on induced emf here: https://brainly.com/question/13744192
#SPJ1
The coil's average induced emf is 3.92 volts.
How to calculate average induced emf?The average induced emf in the coil can be calculated using Faraday's law of electromagnetic induction, which states that the induced emf is equal to the rate of change of magnetic flux through the coil.
The magnetic flux through the coil is given by:
Φ = BA cos θ
where B is the magnetic field, A is the area of the coil, and θ is the angle between the magnetic field and the normal to the plane of the coil.
In this case, θ = 90°, so cos θ = 0.
Therefore, Φ = BA cos θ = 0.
When the magnetic field reverses direction, the magnetic flux through the coil changes at a rate of:
ΔΦ/Δt = BA/Δt
where Δt is the time for the magnetic field to reverse direction.
The induced emf is then:
ε = - ΔΦ/Δt
where the negative sign indicates that the emf is induced in such a way as to oppose the change in magnetic flux.
Substituting the given values:
ε = - (BA/Δt) = - [(0.35 T)(3.8×10⁻² m²)/(0.34 s)] = - 3.92 V
Therefore, the average induced emf in the coil is 3.92 volts.
Find out more on induced emf here: https://brainly.com/question/13744192
#SPJ1
True or False, in astronomical usage, all atoms heavier than helium.
Answer: false
Explanation:
The Michelson interferometer can be used to measure extremely small distance scales. What is the smallest distance scale that can be measured? What uncertainty is associated with this? How could the precision be increased?
The Michelson interferometer can measure distance scales on the order of nanometers, which is extremely small.
However, the smallest distance scale that can be measured with this instrument is ultimately limited by the wavelength of the light being used. Typically, the wavelength of the light used in Michelson interferometers is in the visible range, which means the smallest distance scale that can be measured is on the order of a few hundred nanometers.
The uncertainty associated with this measurement depends on the quality of the instrument and the experimental setup. Factors such as vibration, temperature changes, and other environmental factors can introduce noise into the measurement, which can limit the precision of the instrument. In general, the uncertainty associated with a Michelson interferometer measurement can be on the order of a few nanometers or less.
To increase the precision of a Michelson interferometer, there are several strategies that can be employed. One approach is to use higher quality optics, which can reduce the amount of noise in the measurement. Another approach is to use longer-wavelength light, which can increase the resolution of the measurement. Additionally, the instrument can be operated in a vacuum or isolated from environmental factors to further reduce noise.
To learn more about Michelson interferometer click here
brainly.com/question/10227778
#SPJ11
Which of the following is considered a limitation of sensors?
O Ability to read value based on light level
O Measuring sound waves time to travel
O Having to calculate data for proper reading
O Need for work-around for extended power outage
Answer:
Option D) Need for work-around for extended power outage is considered a limitation of sensors.
Explanation:
Consider a (pretty big!) balloon left out in the sun to heat up. It expands from V=1m to V=2 m?. Chec Led "If we write the atmospheric pressure as p, then how much work was done by the balloon? Op*(1m) O-p*(1m) o ln(p)*(1m3) Op* (2m) O-p*(2m3) Submit Your submis: DI?: Submitted: Monday, October 18 at 2:55 AM Feedback: Feedback will be available after 10:00 AM on Monday, October 18 Survey Question) 2) Briefly explain your reasoning. Work done (W) = P. Delta P(VI-VI) m^3 P(2-1)m^3 Submit 3) If we double the temperature, what happens to the average velocity of the particles? Increases by a factor of 2 O Increases by a factor of V2 Stays the same Decreases by a factor of 2 Decreases by a factor of 2 Submit (Survey Question) "Briefly explain your reasoning.
The Partial pressure of o₂ is 380 mm of Hg, atmospheric pressure is 760 mm of Hg.
What is pressure ?
The definition of pressure is the amount of force that is exerted to a certain region. It can be calculated mathematically as P=FA, where F is the force applied perpendicular to surface area A. The pascal (Pa), or one newton per square metre (N/m 2), is the accepted unit of pressure..
What is partial pressure ?
The idea of partial pressure arises from the fact that each individual gas contributes a portion of the total pressure, and that portion is the partial pressure of that gas. In order to describe all the pieces, it is essentially like taking a percentage or fraction of the whole.
Partial pressure of o₂= mole fraction of o₂ × total pressure
Po₂= 1/2 ×760
380 mm of Hg
Mole fraction of o₂ is 1/2 because 50% of particles is that of o₂
Also atmospheric pressure is 760 mm of Hg.
Therefore, the Partial pressure of o₂ is 380 mm of Hg, atmospheric pressure is 760 mm of Hg.
Learn more about pressure from the given link.
https://brainly.com/question/28012687
#SPJ1
A 0.130-kg baseball is dropped from rest. If the magnitude of the baseball's momentum is 1.45 kg⋅m/s just before it lands on the ground, from what height was it dropped? h=_____ m
The baseball was dropped from a height of approximately 7.76 meters.
To find the height from which the baseball was dropped, we can use the principle of conservation of mechanical energy. Since the baseball is dropped from rest, its initial kinetic energy is 0. As it falls, potential energy is converted into kinetic energy.
The final momentum of the baseball is given as 1.45 kg⋅m/s. We can use this to find the final velocity (v) using the formula:
momentum = mass × velocity
1.45 kg⋅m/s = 0.130 kg × v
v ≈ 11.15 m/s
Now, we can equate the initial potential energy (PE) with the final kinetic energy (KE) using the formula:
PE_initial = KE_final
m × g × h = 0.5 × m × v^2
Where m is the mass of the baseball (0.130 kg), g is the acceleration due to gravity (9.81 m/s²), and h is the height we want to find.
0.130 kg × 9.81 m/s² × h = 0.5 × 0.130 kg × (11.15 m/s)^2
Solving for h:
h ≈ 7.76 m
So, the baseball was dropped from a height of approximately 7.76 meters.
To learn more about mechanical energy, refer below:
https://brainly.com/question/29509191
#SPJ11
The baseball was dropped from a height of approximately 7.76 meters.
To find the height from which the baseball was dropped, we can use the principle of conservation of mechanical energy. Since the baseball is dropped from rest, its initial kinetic energy is 0. As it falls, potential energy is converted into kinetic energy.
The final momentum of the baseball is given as 1.45 kg⋅m/s. We can use this to find the final velocity (v) using the formula:
momentum = mass × velocity
1.45 kg⋅m/s = 0.130 kg × v
v ≈ 11.15 m/s
Now, we can equate the initial potential energy (PE) with the final kinetic energy (KE) using the formula:
PE_initial = KE_final
m × g × h = 0.5 × m × v^2
Where m is the mass of the baseball (0.130 kg), g is the acceleration due to gravity (9.81 m/s²), and h is the height we want to find.
0.130 kg × 9.81 m/s² × h = 0.5 × 0.130 kg × (11.15 m/s)^2
Solving for h:
h ≈ 7.76 m
So, the baseball was dropped from a height of approximately 7.76 meters.
To learn more about mechanical energy, refer below:
https://brainly.com/question/29509191
#SPJ11
Find Kp,Kd, Kį for the following second-order dominant system such that: i. Peak time tp = 0.828 s ii. Peak overshoot Mo = 20% iii. The third pole for the closed loop system is at 8 times the distance of the dominant poles from the imaginary axis. Consider the effect of the additional zeros to be negligible. S + 4 2 Rp 0-0-1-ben (s + 4)(s +2) * 3
To determine the controller parameters, we need to first find the transfer function of the second-order dominant system. We are given the following transfer function:
G(s) = 1 / [(s+4)(s+2)]
The characteristic equation of the closed-loop system can be expressed as:
s³ + (Kd + Kp)s² + (KpKi + 6)s + 8Kp = 0
From the given information, we can determine the values of Kp, Kd, and Ki as follows:
i. Peak time tp = 0.828 s
The peak time can be expressed as:
tp = π / ωd
where ωd is the damped natural frequency. The damped natural frequency can be expressed as:
ωd = ωn x sqrt(1 - ζ²)
where ωn is the natural frequency and ζ is the damping ratio. For a second-order system with a peak time of tp, we have:
tp = (2ζπ) / ωn x sqrt(1 - ζ²)
Solving for ζ and ωn, we get:
ζ = 0.455
ωn = 4.78
ii. Peak overshoot Mo = 20%
The peak overshoot can be expressed as:
Mo = E(-ζπ / sqrt(1 - ζ²))
Solving for ζ, we get:
ζ = 0.268
iii. The third pole for the closed-loop system is at 8 times the distance of the dominant poles from the imaginary axis.
The dominant poles of the system are located at s = -4 and s = -2. The distance of these poles from the imaginary axis is 4. The third pole is located at 8 times this distance, which is 32. Therefore, the third pole is located at s = -32.
Using the values of ζ and ωn from part (i), we can express the transfer function of the second-order dominant system as:
G(s) = 0.099 / (s² + 0.862s + 1.443)
To find the controller parameters, we can use the following relations:
Kp = ωn² / K
Kd = 2ζωn / K
Ki = K / ωn²
where K is the gain of the system.
We can determine the gain of the system by setting s = 0 in the transfer function of the second-order dominant system:
K = 1.443 x 0.099 = 0.142857
Using this value of K, we can determine the controller parameters:
Kp = 11.98
Kd = 4.36
Ki = 0.0775
Therefore, the required controller parameters are:
Kp = 11.98
Kd = 4.36
Ki = 0.0775
To know more about controller parameters, visit:
https://brainly.com/question/1672551
#SPJ1
why was the op-amp unable to source 1 ma current to the 22 kω load?
The op-amp was unable to source 1 mA current to the 22 kΩ load because of its output current limitations.
The reason is as follows-
1. An op-amp has a maximum output current rating, which is the maximum current it can provide to a load.
2. If the required current (1 mA in this case) exceeds the op-amp's maximum output current rating, it won't be able to source the necessary current.
3. To determine the required current for the 22 kΩ load, you can use Ohm's Law (V = I * R), where V is voltage, I is current, and R is resistance. In this case, we need to find I.
4. Rearrange the formula to solve for I: I = V / R.
5. Assuming the op-amp's output voltage is at its maximum value (let's call it Vmax), we can calculate the required current: I = Vmax / 22 kΩ.
6. If the calculated current (I) is greater than the op-amp's maximum output current rating, the op-amp will be unable to source 1 mA current to the 22 kΩ load.
To learn more about "current", visit: https://brainly.com/question/1100341
#SPJ11
if 480 c pass through a 4.0-ω resistor in 10 min, what is the potential difference across the resistor?
The potential difference across the 4.0-Ω resistor is 12 volts.
To find the potential difference across the resistor, we first need to determine the current (I) using the formula: I = Q/t, where Q is the charge (480 C) and t is the time (10 min or 600 seconds). Next, we'll apply Ohm's Law, V = IR, where V is the potential difference, I is the current, and R is the resistance (4.0 Ω).
1. Calculate the current: I = Q/t = 480 C / 600 s = 0.8 A
2. Determine the potential difference: V = IR = 0.8 A × 4.0 Ω = 12 V
So, the potential difference across the 4.0-Ω resistor is 12 volts.
To know more about Ohm's Law click on below link:
https://brainly.com/question/1247379#
#SPJ11