At 25 °C, the product of the hydronium ion concentration and the hydroxide ion concentration is always equal to 1.0 x 10^-14 (at standard pressure).
Therefore, if the hydroxide ion concentration is 2.8 x 10^-7 M, we can calculate the hydronium ion concentration as:
hydronium ion concentration = 1.0 x 10^-14 / hydroxide ion concentration
hydronium ion concentration = 1.0 x 10^-14 / 2.8 x 10^-7
hydronium ion concentration = 3.57 x 10^-8 M
So the hydronium ion concentration of the solution is 3.57 x 10^-8 M (to two significant figures).
Standard pressure is the atmospheric pressure measured at sea level and is equal to 1 atmosphere (atm), 101.3 kilopascals (kPa), 760 millimeters of mercury (mmHg), or 29.92 inches of mercury (inHg). It is often used as a reference point in scientific experiments and calculations.
Visit here to learn more about standard pressure brainly.com/question/15842060
#SPJ11
what kinds of information can be learned about molecules from the x-axis of an absorbance spectrum?
The information that can be learned about molecules from the x-axis of an absorbance spectrum is the wavelength.
The x-axis of an absorbance spectrum typically represents the wavelength of light being absorbed by the molecule. From this information, one can learn about the electronic structure of the molecule and the types of chemical bonds present. This information helps to identify the molecule's structure, electronic transitions, and possible functional groups present in the molecule.
Additionally, the position and intensity of the peaks on the x-axis can provide information about the concentration of the molecule in the sample and any chemical interactions that may be occurring. Overall, the x-axis of an absorbance spectrum can provide valuable insights into the chemical properties of the molecule being analyzed.
Learn more about absorbance spectrum here: https://brainly.com/question/28007345
#SPJ11
A 0.0133 mol sample of Ba(OH)2 is dissolved in water to make up 15 L of solution. What is the pH of the solution?
The pH of the Ba(OH)2 solution is approximately 11.25
To find the pH of the Ba(OH)2 solution, we first need to calculate the concentration of OH- ions and then convert it to pH.
1. Calculate the concentration of OH- ions:
Ba(OH)2 dissociates into 1 Ba²⁺ ion and 2 OH⁻ ions. Therefore, the moles of OH⁻ ions will be twice the moles of Ba(OH)2.
Moles of OH⁻ ions = 0.0133 mol × 2 = 0.0266 mol
Next, we find the concentration by dividing the moles of OH⁻ ions by the volume of the solution.
[OH⁻] = 0.0266 mol / 15 L = 0.001773 mol/L
2. Convert the concentration of OH- ions to pH:
First, we calculate the pOH value:
pOH = -log10([OH⁻]) = -log10(0.001773) ≈ 2.75
Finally, we convert pOH to pH using the relationship:
pH + pOH = 14
pH = 14 - pOH = 14 - 2.75 ≈ 11.25
The pH of the Ba(OH)2 solution is approximately 11.25.
Know more about pH here:
https://brainly.com/question/491373
#SPJ11
What products would you expect from reaction of the following alkenes with NBS? If more than one product is formed, show the structures of all.
The products would from reaction of the following alkenes with NBS (N-bromosuccinimide) typically results in the formation of allylic bromides via allylic bromination.
NBS is a selective brominating agent that allows for the replacement of a hydrogen atom at an allylic position with a bromine atom, generating products that are resonance-stabilized. If more than one product is formed, it's likely due to the presence of multiple allylic positions in the starting alkene or the possibility of forming different stereoisomers. In such cases, the major product will be the one that is more stable due to resonance or steric factors.
Structures of all the possible products can be drawn by replacing the allylic hydrogens in the starting alkene with bromine atoms and considering any stereoisomers formed. In summary, the reaction of alkenes with NBS results in allylic bromides, and if multiple products are formed, they will be due to different allylic positions or stereoisomers. The products would from reaction of the following alkenes with NBS (N-bromosuccinimide) typically results in the formation of allylic bromides via allylic bromination.
Learn more about NBS at:
https://brainly.com/question/28218391
#SPJ11
Which pairs of molecules have the correct boiling point (bp) trend? Show & explain all work.
i.) bp of CS2 > bp of CO2
ii.) bp of O2 > bp of H2
iii.) bp of SiH4 > bp of SnH4
The correct trend for the first pair is CS₂ > CO₂ due to stronger London dispersion forces. The correct trend for the second pair is O₂ > H₂ because of more electrons and stronger London dispersion forces.
Here's the boiling point trend for each pair of molecules:
i.) bp of CS₂ > bp of CO₂
CS₂ (carbon disulfide) has a boiling point of 46.3°C, while CO₂ (carbon dioxide) has a boiling point of -78.5°C. The reason for this difference is that CS₂ has stronger London dispersion forces due to its larger molecular size and higher number of electrons compared to CO₂. CO₂ has weaker interactions because it is a linear molecule with polar bonds, but the molecule itself is nonpolar, resulting in weaker attractive forces between molecules.
ii.) bp of O₂ > bp of H₂
O₂ (oxygen) has a boiling point of -183°C, and H₂ (hydrogen) has a boiling point of -252.87°C. O₂ has a higher boiling point because it has more electrons, which results in stronger London dispersion forces compared to H₂. The small size and low electron count of H₂ lead to weaker London dispersion forces and a lower boiling point.
iii.) bp of SiH₄ > bp of SnH₄
SiH₄ (silane) has a boiling point of -111.8°C, while SnH₄ (stannane) has a boiling point of -52°C. In this case, the trend is incorrect, as SnH₄ has a higher boiling point than SiH₄. The higher boiling point of SnH₄ is due to its larger molecular size and higher number of electrons, leading to stronger London dispersion forces between its molecules compared to SiH₄.
In summary:
- The correct trend for the first pair is CS₂ > CO₂ due to stronger London dispersion forces.
- The correct trend for the second pair is O₂ > H₂ because of more electrons and stronger London dispersion forces.
- The trend for the third pair is incorrect, and the correct trend is SnH₄ > SiH₄ due to larger molecular size and stronger London dispersion forces.
Learn more about boiling point :
https://brainly.com/question/2153588
#SPJ11
consider the molecules scl2, f2, cs2, cf4, and brcl. (a) which has bonds that are the most polar? cf4 (b) which of the molecules have dipole moments? brcl, scl2
Sure, I'd be happy to help!
To answer your question, we need to understand what dipole moments are and how they relate to the polarity of bonds in molecules.
bonds negative charges within a molecule. It is caused by the unequal sharing of electrons between atoms in a bond. When one atom has a higher electronegativity than the other, it attracts the shared electrons more strongly, creating a partial negative charge (δ-) on that atom and a partial positive charge (δ+) on the other atom.
The polarity of a bond is determined by the difference in electronegativity between the two atoms involved. The greater the difference, the more polar the bond.
Now let's apply these concepts to the molecules you listed.
CF4 has bonds that are the most polar because fluorine is highly electronegative compared to carbon, creating a large difference in electronegativity and thus a highly polar bond.
BRCl and SCl2 both have dipole moments because they have polar bonds due to differences in electronegativity between the atoms involved.
F2 and CS2 do not have dipole moments because the bonds in these molecules are nonpolar, meaning that the electrons are shared equally between the atoms involved and there is no separation of charge.
I hope that helps! Let me know if you have any further questions.
Hi! Considering the given molecules SCl2, F2, CS2, CF4, and BrCl:
(a) The most polar bonds are found in BrCl. This is because the electronegativity difference between Br and Cl is greater than the other molecules, creating a stronger dipole.
(b) The molecules with dipole moments are BrCl and SCl2. Both of these molecules have an asymmetric distribution of charge due to the difference in electronegativity between their constituent atoms.
Learn more about bonds in molecules here;
https://brainly.com/question/29224615
#SPJ11
Calculate the pressure of 1.00 mol of nitrogen gas at 7.50 L and O C using the van der Waals equation. 0.95 atm O 1.97 atm 2.97 atm 3.25 atm O 0.67 atm
The pressure of 1.00 mol of nitrogen gas at 7.50 L and 0°C using the van der Waals equation is 2.97 atm.
To calculate the pressure of 1.00 mol of nitrogen gas at 7.50 L and 0°C using the van der Waals equation, we'll first need the van der Waals constants for nitrogen (a and b) and convert the temperature to Kelvin.
For nitrogen:
a = 1.39 L²atm/mol²
b = 0.0391 L/mol
T = 0°C = 273.15 K
The van der Waals equation is:
[P + a(n/V)²](V - nb) = nRT
where:
P = pressure
n = moles of gas (1.00 mol)
V = volume (7.50 L)
R = gas constant (0.0821 L atm / K mol)
T = temperature (273.15 K)
Plug in the values:
[P + (1.39)(1/7.50)²](7.50 - (0.0391)(1)) = (1)(0.0821)(273.15)
Solve for P:
[P + 0.0248](7.4609) = 22.416
Divide both sides by 7.4609:
P + 0.0248 = 3.0027
Subtract 0.0248 from both sides:
P = 2.9779 atm
The closest answer from the given options is 2.97 atm.
Learn more about van der Waals equation here: https://brainly.com/question/29280050
#SPJ11
The pressure of 1.00 mol of nitrogen gas at 7.50 L and 0°C using the van der Waals equation is 2.97 atm.
To calculate the pressure of 1.00 mol of nitrogen gas at 7.50 L and 0°C using the van der Waals equation, we'll first need the van der Waals constants for nitrogen (a and b) and convert the temperature to Kelvin.
For nitrogen:
a = 1.39 L²atm/mol²
b = 0.0391 L/mol
T = 0°C = 273.15 K
The van der Waals equation is:
[P + a(n/V)²](V - nb) = nRT
where:
P = pressure
n = moles of gas (1.00 mol)
V = volume (7.50 L)
R = gas constant (0.0821 L atm / K mol)
T = temperature (273.15 K)
Plug in the values:
[P + (1.39)(1/7.50)²](7.50 - (0.0391)(1)) = (1)(0.0821)(273.15)
Solve for P:
[P + 0.0248](7.4609) = 22.416
Divide both sides by 7.4609:
P + 0.0248 = 3.0027
Subtract 0.0248 from both sides:
P = 2.9779 atm
The closest answer from the given options is 2.97 atm.
Learn more about van der Waals equation here: https://brainly.com/question/29280050
#SPJ11
Highly concentrated nitric acid, HNO3, it’s often need to recover gold powder from the waste sledge of smelting plants.
The first step in the process is summarized in the unbalanced reaction below balance of the reaction.
__HNO3(L) + __Au(s) + __AuNO3(aq) + __H2(g)
What is the reaction tape
Is 13.6 g of gold are to be dissolved how many milliliters of 24 M HNO3 Will be needed?
We need 5.75 mL of 24 M HNO3 to dissolve 13.6 g of gold.
Concentrated nitric acid reacts with gold to produce gold powder.
2Au(s) + 10H+ + 4NO3- → 4HNO3(L). 2Au(NO3)4- + 4NO2(g) + 6H2O(l)
Nitric acid oxidises gold, forming gold ions in a redox process.
First, we must convert 13.6 g of gold to moles to compute the quantity of 24 M HNO3 required to dissolve it. 13.6 g of gold is 0.069 moles since its molar mass is 196.97 g/mol.
Next, we calculate the HNO3/Au mole ratio using the balanced equation. From the equation, 4 moles of HNO3 dissolve 2 moles of Au. Thus, 0.138 moles of HNO3 dissolves 0.069 moles of Au.
Finally, we determine 24 M HNO3 volume using M = n/V. Solving for V:
V = n/M
where n is 0.138 moles of HNO3 and M is 24 M.
Substituting values yields:
V = 0.138 moles/24 mol/L = 0.00575 L
Multiplying by 1000 converts volume to millilitres:
5.75 mL = 0.00575 × 1000 mL/L.
5.75 mL of 24 M HNO3 dissolves 13.6 g of gold.
Learn more about balancing equation, here
https://brainly.com/question/7181548
#SPJ1
if a jar test demonstrates that the optimum dosage for coagulation is 25 ppm al3 , how many lbs alum are required for a 45 mgd water treatment plant?
You would need 1,125 pounds of alum per day for a 45 MGD water treatment plant with an optimum coagulation dosage of 25 ppm Al3.
To determine the amount of alum required for a 45 mgd water treatment plant at an optimum dosage of 25 ppm Al3, we need to use a conversion factor. One pound of alum contains 0.553 pounds of Al3. Therefore, we can calculate the amount of alum required as follows:
Alum required (lbs/day) = (Optimum dosage in ppm * Flow rate in MGD * 8.34) / (Al3 content in alum * 1000)
Substituting the values, we get:
Alum required (lbs/day) = (25 * 45 * 8.34) / (0.553 * 1000) = 77.7 lbs/day
Therefore, approximately 77.7 lbs of alum are required per day for a 45 mgd water treatment plant at an optimum dosage of 25 ppm Al3.
Learn more about coagulation here:
https://brainly.com/question/12077625
#SPJ11
Label each statement as true or false. Correct any false statement to make it true.
A. Increasing temperature increases reaction rate
B. If a reaction is fast, it has a large rate constant.
C. A fast reaction has a large negative ΔG° value.
D. When Ea is large, the rate constarnt k is also large.
E. Fast reactions have equilibrium constants >1
F. Increasing the concentration of a reactant always increases the rate of a reaction.
A. True
B. False - A reaction can be fast with a small rate constant and slow with a large rate constant.
C. False - A fast reaction can have a negative ΔG° value, but the two are not directly correlated.
D. False - When Ea is large, the rate constant k is typically small.
E. False - Equilibrium constants do not determine the rate of a reaction.
F. False - Increasing the concentration of a reactant can increase the rate of a reaction, but there are other factors that
A. Increasing temperature increases reaction rate - True
B. If a reaction is fast, it has a large rate constant. - True
C. A fast reaction has a large negative ΔG° value. - False
Correction: A spontaneous reaction (not necessarily fast) has a negative ΔG° value.
D. When Ea is large, the rate constant k is also large. - False
Correction: When Ea is small, the rate constant k is large.
E. Fast reactions have equilibrium constants >1 - False
Correction: Equilibrium constants >1 indicate that products are favored, but it does not necessarily mean the reaction is fast.
F. Increasing the concentration of a reactant always increases the rate of a reaction. - True
Learn more about reaction here:
https://brainly.com/question/28984750
#SPJ11
a metal with a threshold frequency of 1.39×10^15 s^−1 emits an electron with a velocity of 6.76×10^5 m/s when radiation of 1.68×10^15 s−1 strikes the metal.
Part A
Calculate the mass of the electron.
The mass of the electron is approximately 5.69 × 10⁻³⁵ kg.
We can use the Einstein's famous equation relating energy and mass to solve for the mass of the electron:
E = mc²
where E is the energy of the electron, m is its mass, and c is the speed of light.
First, we can find the energy of the incident radiation using Planck's equation:
E = hf
where h is Planck's constant and f is the frequency of the radiation.
E = (6.626 × 10⁻³⁴ J s) × (1.68 × 10^¹⁵ s⁻¹) = 1.11 × 10⁻¹⁸ J
Next, we can find the kinetic energy of the electron using the formula:
KE = 1/2 mv²
where KE is the kinetic energy of the electron, m is its mass, and v is its velocity.
KE = 1/2 × m × v²
We know that the energy of the incident radiation is equal to the work function plus the kinetic energy of the emitted electron:
E = Φ + KE
where Φ is the work function of the metal.
Solving for KE and substituting the given values, we get:
KE = E - Φ = (1.11 × 10⁻¹⁸ J) - h(f0) = (1.11 ×10⁻¹⁸J) - h(1.39 × 10¹⁵ s⁻¹)
KE = 5.11 × 10⁻¹⁹ J
Now, we can solve for the mass of the electron using the formula:
m = KE/c²
m = (5.11 × 10⁻¹⁹ J)/(3.00 × 10⁸ m/s)² = 5.69 × 10⁻³⁵ kg
Therefore, the mass of the electron is approximately 5.69 × 10⁻³⁵ kg.
Learn more about kinetic energy
https://brainly.com/question/26472013
#SPJ4
Calculate the molar solubility of AgCl in 1.0 M NH3. Ksp for AgCl is 1.8×10−10; Kf for Ag(NH3)2+ ion is 1.7×107
The molar solubility of AgCl in 1.0 M NH3 is 1.3×10^-4 M.
How to calculate the molar solubility?To calculate the molar solubility of AgCl in 1.0 M NH3, we can use the concept of complex ion formation and the formation constant (Kf) for Ag(NH3)2+ ion.
1. Write the dissolution reaction of AgCl:
AgCl (s) ⇌ Ag+ (aq) + Cl- (aq)
2. Write the complexation reaction between Ag+ and NH3:
Ag+ (aq) + 2NH3 (aq) ⇌ Ag(NH3)2+ (aq)
3. Use the given Ksp for AgCl and Kf for Ag(NH3)2+ ion:
Ksp = 1.8 × 10^(-10)
Kf = 1.7 × 10^7
4. Calculate the equilibrium constant for the combined reaction:
Ksp = [Ag+][Cl-] = x^2
Kf = [Ag(NH3)2+]/[Ag+][NH3]^2 = 1.7×10^7
5. Let x be the molar solubility of AgCl:
AgCl (s) ⇌ Ag+ (aq) + Cl- (aq) [x][x]
Ag+ (aq) + 2NH3 (aq) ⇌ Ag(NH3)2+ (aq) [x][1.0-2x]^2
6. Apply the equilibrium constant expression:
[Ag(NH3)2+] = Kf[Ag+][NH3]^2 = 1.7×10^7 x^3
7. Substitute the concentrations and solve for x:
Ksp = x^2 = [Ag+][Cl-] = [Ag(NH3)2+][Cl-] = [Cl-][Ag+][NH3]^2
x^2 = (1.7×10^7 x^3)(1.0 M)
x = √(1.7×10^-7) = 1.3×10^-4 M
To know more about Molar Solubility:
https://brainly.com/question/15080354
#SPJ11
How many formula units are contained in 1.67 g CaO
There are approximately 1.79 x 10²² formula units of CaO in 1.67 g of CaO.
What is Avogadro's constant?Avogadro's constant, also known as Avogadro's number (N_A), is a fundamental physical constant that represents the number of constituent particles (usually atoms or molecules) in one mole of a substance.
The value of Avogadro's constant is approximately 6.022 x 10²³ particles per mole. This means that one mole of any substance contains 6.022 x 10²³ particles. For example, one mole of oxygen gas (O2) contains 6.022 x 10²³ oxygen molecules, and one mole of sodium chloride (NaCl) contains 6.022 x 10²³ sodium ions and 6.022 x 10²³ chloride ions.
To determine the number of formula units of CaO in 1.67 g of CaO, we need to use the molar mass of CaO and Avogadro's number.
The molar mass of CaO is:
CaO = 40.08 g/mol (Ca) + 16.00 g/mol (O) = 56.08 g/mol
Using the molar mass, we can calculate the number of moles of CaO:
n = m/M = 1.67 g / 56.08 g/mol = 0.0298 mol
Finally, we can use Avogadro's number, which is 6.022 x 10²³ formula units/mol, to calculate the number of formula units of CaO:
number of formula units = n x N_A = 0.0298 mol x 6.022 x 10²³ formula units/mol = 1.79 x 10²² formula units.
To know more about Avogadro's number, visit:
https://brainly.com/question/11907018
#SPJ1
write the brønsted acid equation for ch3cooh(aq).color of universal indicator in CH3COOH ____ pH ___color of universal indicator after addition of NaCH3CO2 ____ pHeffect of NaCH3CO2 on the equilibrium. use equation 16.14 to account for your observation,color of universal indicator in water _____
The Bronsted acid equation for CH3COOH(aq) is:
CH3COOH + H2O ⇌ H3O+ + CH3COO-
The color of the universal indicator in CH3COOH is typically orange-yellow, indicating a pH of around 3-4, the color of the universal indicator may change to green or blue-green after the addition of NaCH3CO2, indicating a higher pH of around 8-9.
This is because NaCH3CO2 is a weak base that can react with the acid CH3COOH to form its conjugate base, CH3COO-, and water:
NaCH3CO2 + H2O ⇌ CH3COO- + Na+ + OH-The reaction shifts the equilibrium to the right, decreasing the concentration of H3O+ and increasing the concentration of CH3COO-. As a result, the pH increases, and the color of the universal indicator changes.
Using equation 16.14, which relates the equilibrium constant (Ka) for a weak acid to its pKa value, we can account for this observation. The pKa value for CH3COOH is approximately 4.76. When NaCH3CO2 is added, it reacts with CH3COOH to form CH3COO-, which is the conjugate base of a weak acid. The pKa value for CH3COOH and CH3COO- are related by the equation:
pKa(acid) + pKa(base) = 14
Thus, the pKa value for CH3COO- is;
pKa(acid) + pKa(base) = 14
pKa(base) = 14 - pKa(acid)
= 14 - 4.76
= 9.24
This means that CH3COO- is a weaker acid than CH3COOH, and the equilibrium will shift to the right to favor the formation of CH3COO- and H2O.
In water, the color of the universal indicator is typically green, indicating a neutral pH of around 7.
https://brainly.com/question/31485776
#SPJ11
Radium-226 undergoes alpha decay. What will be the products of this nuclear reaction? Explain.
When Radium-226 undergoes alpha decay an alpha particle (that is a double positively charged helium ion) and radon-222 are produced as products.
Why are radon-222 and a double positively charged helium produced?When Radium-226 undergoes an alpha decay, it emits an alpha particle which comprises two protons and two neutrons that is equivalent to a helium nucleus. Owing to this nuclear reaction is the formation of a new atom with a mass number that is four units less than that of the original atom here, radium-226, and an atomic number that is two units less than that of the original radium-226.
The balanced chemical reaction for the radioactive decay of radium-226 is:
²²⁶₈₈Ra → ²²²₈₆Rn + ⁴₂He²⁺ + 2e⁻
Masses of the reactants and products are always conserved in any given chemical reaction and so the production of radon-222 must be accompanied by the production of helium ion to balance the masses on both sides.
Learn more about radioactive decay here:
https://brainly.com/question/1770619
#SPJ1
calculate the acid dissociation constant ka of hydrocyanic acid (hcn) at 25.0c is 4.9x10^-10
The acid dissociation constant (Ka) is a measure of the strength of an acid. For hydrocyanic acid (HCN) at 25°C, the Ka is 4.9 x 10^-10. This means that at equilibrium, only a small fraction.
of HCN molecules dissociate into H+ ions and CN- ions. The Ka value can be calculated using the equation Ka = [H+][CN-]/[HCN], where [H+], [CN-], and [HCN] are the molar concentrations of the respective species at equilibrium. The pKa, which is the negative logarithm of The acid dissociation constant (Ka) is a measure of the strength of an acid. For hydrocyanic acid the Ka value, is a commonly used measure of acid strength. For HCN, the pKa is 9.31, indicating that it is a weak acid. the acid dissociation constant ka of hydrocyanic acid (hcn) at 25.0c is 4.9x10^-10.
Learn more about acid here:
https://brainly.com/question/14072179
#SPJ11
Number of O atoms in 6.25x10^-3 mol Al(NO3)3 - Express the amount in atoms to three significant digits.
The number of O atoms in 6.25 x 10⁻³ mol Al(NO₃)₃ is 3.38 x 10²² oxygen atoms.
To find the number of O atoms in 6.25 x 10⁻³ mol Al(NO₃)₃, you need to consider the following steps:
1. Determine the number of O atoms in one formula unit of Al(NO₃)₃. There are three NO₃ groups, each containing 3 O atoms, so there are 3 x 3 = 9 O atoms in one formula unit.
2. Use Avogadro's number (6.022 x 10²³ atoms/mol) to convert moles of Al(NO₃)₃ to atoms.
Now, you can calculate the total number of O atoms:
(6.25 x 10⁻³ mol Al(NO₃)₃) x (9 O atoms/formula unit) x (6.022 x 10²³ atoms/mol)
This gives you approximately 3.38 x 10²² O atoms.
So, there are 3.38 x 10²² oxygen atoms in 6.25 x 10⁻³ mol Al(NO₃)₃, expressed to three significant digits.
Learn more about oxygen atoms: https://brainly.com/question/29695801
#SPJ11
in which one of the following species is the central atom (the first atom in the formula) an exception to the octet rule? group of answer choices no water i2 bcl4- hydronium ion
In the given species, the central atom that is an exception to the octet rule is found in BCl4-. In this species, boron (B) is the central atom and has only 6 electrons around it, which is an exception to the octet rule that states atoms generally aim to have 8 electrons in their valence shell.
Boron, the central atom, only has six valence electrons in this compound, instead of the usual eight electrons that would fill its valence shell according to the octet rule. This is because boron is a member of group 3A of the periodic table, and as such, it has only three valence electrons available for bonding. In BCl4-, boron forms four covalent bonds with chlorine atoms, resulting in a stable compound with an incomplete octet around the boron atom. The other species mentioned (water, I2, and hydronium ion) follow the octet rule for their central atoms.
Learn more about octet rule here:
https://brainly.com/question/30779148
#SPJ11
Arrange the following isoelectronic series in order of increasing atomic radius: Se2−, Sr2+, As3−, Rb+, Br−.
The isoelectronic series of Se²⁻, Sr²⁺, As³⁻, Rb⁺, and Br⁻ can be arranged in order of increasing atomic radius, starting with Se2− and ending with Br−.
Isoelectronic series is a term which refers to a group of atoms or ions which have the same electron configuration. These atoms and ions have the same number of electrons, but different numbers of protons. As such, they possess the same electron configuration, but different atomic radii.
Se²⁻, has the smallest atomic radius, due to its high nuclear charge and low electron count. Sr²⁺ has a slightly larger atomic radius than Se²⁻, owing to its lower nuclear charge and slightly higher electron count. As³⁻ has an even larger atomic radius, as its nuclear charge is lower than Sr²⁺, and its electron count is higher.
Rb⁺ has an even larger atomic radius than As³⁻, due to its lower nuclear charge and higher electron count. Finally, Br⁻ has the largest atomic radius of the series, as it has the highest electron count and the lowest nuclear charge.
Know more about isoelectronic series here
https://brainly.com/question/30808153#
#SPJ11
A silver rod and a standard hydrogen electrode (SHE) are dipped into a saturated aqueous solution of silver oxalate, Ag,CO. at 25°C. The measured potential difference between the rod and SHE IS 0.589V. with the rod being positive. In this problem you will use this voltage to determine K for Ag C 0. Write the overall net reaction that would occur in this cell under standard state conditions and determine cell. Determine the number of electrons transferred in the net reaction. Determine Ag] in the half-cell containing the saturated solution of Ag2C 04, and then determine Ksp
The overall net reaction that occurs in this cell can be written as:
Ag2C2O4(s) + 2e- -> 2Ag(s) + 2C2O4^2-(aq)
The number of electrons transferred in the net reaction is 2.
Ag] in the half-cell containing the saturated solution of Ag2C 04 is [Ag+] = sqrt(Ksp) and Ksp = [Ag+]^2 = e^(1.66x10^-3)^2 = 1.09 x 10^-5
The cell potential, Ecell, can be calculated using the Nernst equation:
Ecell = E°cell - (RT/nF)lnQ
where E°cell is the standard cell potential, R is the gas electrons, T is the temperature in Kelvin, n is the number of electrons transferred in the net reaction, F is electrons constant, and Q is the reaction quotient.
Under standard state conditions, Q = K, and Ecell = E°cell. Therefore, we can use the measured potential difference between the rod and SHE to determine Ecell:
Ecell = 0.589 V
The standard potential of the SHE is defined to be 0 V, so the standard cell potential, E°cell, is:
E°cell = Ecell + E°SHE = 0.589 V + 0 V = 0.589 V
The number of electrons transferred in the net reaction is 2.
The concentration of Ag+ in the half-cell containing the saturated solution of Ag2C2O4 can be determined from the Nernst equation:
Ecell = E°cell - (RT/nF)lnQ
0.589 V = 0.46 V - (RT/2F)ln[Ag+]^2/[C2O4^2-]
ln[Ag+]^2/[C2O4^2-] = (0.589 V - 0.46 V) x (2F/RT)
ln[Ag+]^2/[C2O4^2-] = 1.66 x 10^-3
[Ag+]^2/[C2O4^2-] = e^1.66x10^-3
[Ag+] = sqrt(Ksp)
where Ksp is the solubility product constant for Ag2C2O4. Therefore, we can calculate Ksp as:
Ksp = [Ag+]^2 = e^(1.66x10^-3)^2 = 1.09 x 10^-5
For more such questions on electrons
https://brainly.com/question/860094
#SPJ11
(2)
if the sample of chips used to make the filtrate weighed 94.0 g how much NaCl is present in one serving (115g) of chips
To determine the amount of NaCl present in one serving (115g) of chips, you first need to calculate the proportion of NaCl in the 94.0g sample used to make the filtrate.
Let's assume "x" represents the amount of NaCl in the 94.0g sample. Next, set up a proportion with the known values:
x (amount of NaCl) / 94.0g (sample weight) = y (amount of NaCl in one serving) / 115g (serving size)
Once you have the proportion, you can solve for "y" to find the amount of NaCl in one serving of chips. However, without knowing the amount of NaCl (x) in the 94.0g sample, it's not possible to calculate the exact amount of NaCl in a 115g serving.
Learn more about NaCl here:
https://brainly.com/question/18248731
#SPJ11
What is the pressure of 2 moles of carbon dioxide at 70 degrees Celsius contained in a 4000 mL container?
10.6 atm is the pressure of 2 moles of carbon dioxide at 70 degrees Celsius contained in a 4000 mL container.
The physical force applied to an object is referred to as pressure. Per unit area, a perpendicular force is delivered over the surface of the objects. F/A (Force every unit area) is the fundamental formula for pressure. Pressure is measured in Pascals (Pa).
Absolute, atmospheric, differential, as well as gauge pressures are different types of pressure. 'Pressure' is the term used to describe the thrust (force) applied to a surface every unit area. The proportion of the force can the surface area (more than where the pressure is acting) is another way to describe it.
P×V = n×R×T
P× 4000 = 2×0.821×330
P = 10.6 atm
To know more about pressure, here:
https://brainly.com/question/12971272
#SPJ1
why does acetyl chloride (2 carbons with 1 polar functional group) react with water almost violently, but you had to warm and shake the mixture of water and benzoyl chloride (7 carbons)?
The reason acetyl chloride reacts with water almost violently is because it is a highly reactive compound due to the presence of the polar functional group, chloride.
Chloride ions are highly electronegative and have a strong affinity for water molecules. When acetyl chloride is added to water, the chloride ions attract water molecules, causing the reaction to occur quickly and violently.
On the other hand, benzoyl chloride has a longer carbon chain and is less reactive than acetyl chloride. This means that the reaction with water is slower and requires a higher energy input, such as warming and shaking the mixture. The longer carbon chain also makes it less polar than acetyl chloride, which means it is less attracted to water molecules and therefore does not react as violently.
Learn more about acetyl chloride here:
https://brainly.com/question/30325322
#SPJ11
48) Jada measured the masses of a small amount of baking soda and a small amount
of vinegar. She mixed the baking soda and vinegar together in a large graduated
cylinder. She observed that bubbles formed in the mixture. When the bubbles
stopped forming, she measured the mass of the cylinder's contents. She found that
this mass was less than the combined mass of the baking soda and vinegar before
mixing. She concluded that a gas had formed and escaped into the air. Which of
the following statements best defends Jada's conclusion?
F. Mass is always conserved when substances undergo a chemical change.
G. Energy is always conserved when substances undergo a chemical change.
H. Solids are always destroyed when substances undergo a physical change.
I. Gases are always produced when substances undergo a chemical change.
The statement that best defends Jada's conclusion is:
I. Gases are always produced when the substances undergo the chemical change.
When substances undergo a chemical change, their atoms are rearranged into new compounds with different properties. In some cases, the chemical reaction can produce a gas as one of the products. This gas may escape into the surrounding environment and cannot be accounted for in the measurement of the final mass of the mixture.
Statements F and G are both related to the conservation laws of mass and energy, respectively, and while important in chemistry, they do not directly address the observation of gas production in this experiment.
Statement H is incorrect because solids can undergo physical changes, such as melting or evaporating, without being destroyed.
Therefore, statement I is the most appropriate explanation for the observation made by Jada, and it best defends her conclusion that a gas was produced and escaped into the air during the chemical reaction between baking soda and vinegar.
Learn more about Baking soda at
brainly.com/question/29771586
#SPJ1
what aldehyde or ketone is needed to prepare each alcohol by metal hydride reduction
To prepare primary alcohols, an aldehyde is needed metal hydride reduction, while for secondary alcohols, a ketone is required.
To prepare an alcohol by metal hydride reduction, you would need an aldehyde or ketone as the starting compound. Metal hydride reagents, such as sodium borohydride (NaBH₄) or lithium aluminum hydride (LiAlH₄), are commonly used for this reduction process.
For a given alcohol, to determine the required aldehyde or ketone, you would need to consider the structural changes during the reduction. In the reduction process, the carbonyl group (C=O) in the aldehyde or ketone is reduced to an alcohol group (OH).
For primary alcohols, you will need an aldehyde. For secondary alcohols, a ketone is required. The carbon chain of the alcohol should match the carbon chain of the aldehyde or ketone.
In summary, to prepare an alcohol by metal hydride reduction, choose an aldehyde for primary alcohols and a ketone for secondary alcohols with matching carbon chains. The metal hydride reagent, like NaBH₄ or LiAlH₄, will reduce the carbonyl group to form the desired alcohol.
Know more about Aldehyde or Ketone here:
https://brainly.com/question/15859478
#SPJ11
solid ammonium phosphate is slowly added to 175 ml of a aluminum iodide solution until the concentration of phosphate ion is 0.0695 m. the maximum amount of aluminum ion remaining in solution is m.
The balanced chemical equation for the reaction between ammonium phosphate and aluminum iodide is: the maximum amount of aluminum ion remaining in solution is 0.139 M.
([tex]NH_{4}[/tex])[tex]3PO_{4}[/tex](aq) + 3 [tex]AlI_{3}[/tex] (aq) → 3 [tex]NH_{4}[/tex]I (aq) + [tex]AlPO_{4}[/tex] (s)
We know that solid ammonium phosphate is slowly added to 175 ml of an aluminum iodide solution, and the concentration of phosphate ion is 0.0695 M at equilibrium. This means that the equilibrium concentration of phosphate ion ([[tex]PO4^{3-}[/tex]]) is 0.0695 M.
Let's assume that x mol of [tex]Al^{3+}[/tex] ions react with the phosphate ions to form [tex]AlPO_{4}[/tex](s) and hence x mol of [tex]Al^{3+}[/tex] ions are removed from the solution. As a result, the concentration of [tex]Al^{3+}[/tex] ions at equilibrium is [[tex]Al^{3+}[/tex]] = (initial concentration of [tex]Al^{3+}[/tex]+ ions) - x.
Since 3 moles of [tex]Al^{3+}[/tex] ions react with 1 mole of [tex]PO4^{3-}[/tex] ions, we can say that the initial concentration of [tex]Al^{3+}[/tex] ions is three times the concentration of phosphate ion. Therefore, the initial concentration of [tex]Al^{3+}[/tex] ions is:
[[tex]Al^{3+}[/tex]]_initial = 3 × [[tex]PO4^{3-}[/tex]]_equilibrium = 3 × 0.0695 M = 0.2085 M
Thus, at equilibrium, we have:
[[tex]Al^{3+}[/tex]] = [[tex]Al^{3+}[/tex]]_initial - x = 0.2085 M - x
The equilibrium concentration of [tex]PO4^{3-}[/tex] ions is given as 0.0695 M. This means that x moles of [tex]Al^{3+}[/tex] ions have reacted with [tex]PO4^{3-}[/tex] ions to form [tex]AlPO_{4}[/tex](s). As a result, the maximum amount of [tex]Al^{3+}[/tex] ions remaining in solution is:
[[tex]Al^{3+}[/tex]] = 0.2085 M - x = 0.2085 M - 0.0695 M = 0.139 M
Therefore, the maximum amount of aluminum ion remaining in solution is 0.139 M.
Learn more about ammonium phosphate
https://brainly.com/question/13504694
#SPJ4
1.00 kg block is attached to a spring with spring constant 13 n/m . while the block is sitting at rest, a student hits it with a hammer and almost instantaneously gives it a speed of 50 cm/s . What is the block's speed at the point where x=0.45A?
The block's speed at the point where x=0.45A is approximately 0.39 m/s.
To find the block's speed, follow these steps:
1. Convert the initial speed to m/s: 50 cm/s = 0.5 m/s.
2. Calculate the initial potential energy (PE) of the spring: PE = 0.5 * k * A², where k=13 N/m and A is the amplitude.
3. Determine the amplitude (A) by setting the initial kinetic energy (KE) equal to the initial potential energy: KE = 0.5 * m * v² = 0.5 * k * A², where m=1.00 kg and v=0.5 m/s.
4. Solve for A: A = sqrt((m * v²) / k) = sqrt((1.00 * 0.5²) / 13).
5. Calculate the block's displacement at 0.45A: x = 0.45 * A.
6. Find the potential energy at x=0.45A: PE = 0.5 * k * (0.45A)².
7. Calculate the kinetic energy at x=0.45A: KE = initial PE - PE at 0.45A.
8. Solve for the block's speed at x=0.45A: v = sqrt((2 * KE) / m).
To know more about potential energy click on below link:
https://brainly.com/question/24284560#
#SPJ11
a chemical reaction is run in which 286 joules of heat are generated and the internal energy changes by -767 joules. calculate w for the system. w = joules
The work (w) for the system is: -1053 joules.
To calculate the work (w) for the system. To do so, we will use the first law of thermodynamics equation:
ΔU = q + w
In this equation, ΔU represents the change in internal energy (-767 joules), q represents the heat generated (286 joules), and w represents the work done on or by the system. We need to solve for w.
Step 1: Plug the values of ΔU and q into the equation:
-767 J = 286 J + w
Step 2: Subtract 286 J from both sides of the equation:
-767 J - 286 J = w
Step 3: Calculate w:
w = -1053 J
To know more about "First law of thermodynamics" refer here:
https://brainly.com/question/28972874#
#SPJ11
a rate is equal to 0.0200 m/s. if [a] = 0.100 m and rate = k[a]0, what is the new rate if the concentration of [a] is increased to 0.400 m?
the new rate when the concentration of A is increased to 0.400 m remains the same as the initial rate, which is 0.0200 m/s.
We are given the following information:
1. The initial rate is 0.0200 m/s
2. The initial concentration of A, [A] = 0.100 m
3. The rate equation is given as rate = k[A]^0
Now, we need to find the new rate when the concentration of A, [A] is increased to 0.400 m.
Step 1: Since the rate equation is given as rate = k[A]^0, we can simplify it to rate = k because any number raised to the power of 0 is 1.
Step 2: Use the initial rate and initial concentration to find the value of k. We are given rate = 0.0200 m/s and [A] = 0.100 m, so:
0.0200 m/s = k
Step 3: Now that we have the value of k, we can use the new concentration of A, [A] = 0.400 m, to find the new rate. Plug in the new concentration into the rate equation:
New rate = k * (0.400 m)^0
Since anything raised to the power of 0 is 1, the equation becomes:
New rate = k
Step 4: Use the value of k from Step 2:
New rate = 0.0200 m/s
To know more about concentration refer to
https://brainly.com/question/17206790
#SPJ11
All hydrogen atoms have one proton. If mass number equals the number of protons plus the number of neutrons, how many neutrons does Tritium have?
Answer:
2
Explanation:
Number of neutrons = Mass number - Number of protons
= 3 - 1
= 2
Report your measurements to the correct number of significant figures. From the procedure 1. Place 30 mL of the cyclohexane and toluene mixture in a 50 mL round bottom flask with a few boiling stones or a stir bar. Volume of the starting solution (mL) Graduated cylinder reading 50 40 30 20
The volume of the starting solution is 10.0 mL
How we can cyclohexane and toluene mixture in a 50 mL round bottom flask with a few boiling stones or a stir bar?The significant figures in a measurement represent the precision of the measurement. In this case, the precision of the measurement is limited by the precision of the graduated cylinder, which is typically accurate to within +/- 0.1 mL. Therefore, we should report the measurements to the nearest 0.1 mL.
The volume of the starting solution can be calculated by subtracting the graduated cylinder reading from 50 mL:
For 50 mL: 50 mL - 40 mL = 10.0 mL
For 30 mL: 30 mL - 20 mL = 10.0 mL
Therefore, the volume of the starting solution is 10.0 mL, which has two significant figures. We should report our measurements to the same number of significant figures as the least precise measurement, which in this case is two significant figures. Therefore, we can report our measurements as:
Learn more about volume.
brainly.com/question/1578538
#SPJ11