Structure of benzylidene diacetate....​

Answers

Answer 1

Explanation:

Benzal .....

Molecular Formula: C11H12O4

Structure Of Benzylidene Diacetate....

Related Questions

If 263 ml of a gas is collected at 47°c and 2.77 atm, what will the final temp be in C if the volume decreases to 195 mL and the pressure increases to 3.87 atm?
im stoopid so yeh pls help

Answers

Answer:

[tex]58.48^{\circ}\text{C}[/tex]

Explanation:

[tex]P_1[/tex] = Initial pressure = 2.77 atm

[tex]V_1[/tex] = Initial volume = 263 mL

[tex]T_1[/tex] = Initial temperature = [tex]47^{\circ}\text{C}=(47+273.15)\ \text{K}[/tex]

[tex]P_2[/tex] = Final pressure = 3.87 atm

[tex]V_2[/tex] = Final volume = 197 mL

[tex]T_2[/tex] = Final temperature

We have the relation

[tex]\dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}\\\Rightarrow T_2=\dfrac{P_2V_2}{P_1V_1}\times T_1\\\Rightarrow T_2=\dfrac{3.87\times 195}{2.77\times 263}\times (47+273.15)\\\Rightarrow T_2=331.63\ \text{K}=331.63-273.15\\\Rightarrow T_2=58.48^{\circ}\text{C}[/tex]

The final temperature will be [tex]58.48^{\circ}\text{C}[/tex].

How would you prepare 500 cm3 of 2.0 M solution of Na2CO3 solution from its anhydrous salt? [C = 12, O = 16, Na = 23

Answers

Answer:

The answer to your question is given below

Explanation:

We'll begin by converting 500 cm³ to L. This can be obtained as follow:

1000 cm³ = 1 L

Therefore,

500 cm³ = 500 cm³× 1 L / 1000 cm³

500 cm³ = 0.5 L

Next, we shall determine the number of mole of Na₂CO₃ in the solution. This can be obtained as follow:

Volume = 0.5 L

Molarity = 2 M

Mole of Na₂CO₃ =?

Molarity = mole /Volume

2 = Mole of Na₂CO₃ / 0.5

Cross multiply

Mole of Na₂CO₃ = 2 × 0.5

Mole of Na₂CO₃ = 1 mole

Finally, we shall determine the mass of 1 mole of Na₂CO₃. This can be obtained as follow:

Mole of Na₂CO₃ = 1 mole

Molar mass of Na₂CO₃ = (23×2) + 12 + (16×3)

= 46 + 12 + 48

= 106 g/mol

Mass of Na₂CO₃ =?

Mass = mole × molar mass

Mass of Na₂CO₃ = 1 × 106

Mass of Na₂CO₃ = 106 g

Thus, to prepare the solution, weigh 106 g of Na₂CO₃ and dissolve in 500 cm³ (i.e 0.5 L) of water.

How many atoms are in neon

Answers

The relative atomic mass of Ne = 20.2. Therefore 20.2 g of neon contains 6.022 × 1023 Ne atoms.

Answer:

I believe 10

Explanation:

if i'm wrong report my answer so it gets deleted and someone else can answer

Look at the diagram below.

Ray 1 from the Sun moves through air and falls on the surface of a lake. Ray 2 is a ray which travels from the surface of the lake at the point Ray 1 strikes the lake, and moves towards air. Ray 1 and Ray 2 make the same angle with the surface of the lake. Ray 1 bends towards the vertical when it enters the lake as Ray 3

Which statement is true?

Ray 2 is the refracted ray.
Ray 3 is the reflected ray.
Ray 1 and Ray 2 make the same angle with the vertical line.
Ray 1 and Ray 3 make the same angle with the vertical line.

Answers

Answer:

3rd statment

Explanation:

ray 1 and 2 are same vertical line

Answer: C:  Ray 1 and Ray 2 make the same angle with the vertical line.

Explanation:

2. Write the symbol proposed by Dalton for silver, sulphur. oxygen and gold.​

Answers

Answer:

check the pdf hope it helps :)

Explanation:

Which pair of elements is most likely to have similar properties? *

Answers

Explanation:

Two different elements have similar chemical properties when they have the same number of valence electrons in there outermost energy level. Elements in the same column of the periodic table have similar chemical properties.

Sally has constructed a concentration cell to measure Ksp for MCln. She constructs the cell by adding 2 mL of 0.05 M M(NO3)n to one compartment of the microwell plate. She then makes a solution of MCln by adding KCl to M(NO3)n. She adds 8.138 mL of the resulting mixture to a second compartment of the microwell plate. Sally knows n (the charge on the metal ion) = +2

She has already calculated [Mn+] in the prepared MCln solution using the Nernst equation. [Mn+] = 8.279 M

Required:
How many moles of [Cl-] must be dissolved in that compartment?

Answers

Answer:

0.13475 mol

Explanation:

From this question sally knows that n= 2

MCln = MCl

[Mn+] using nernst equation = 8.279

The volume of the resulting mixture Mn+ = 8.138 ml

The number of moles mn+ =

8.279 x 8.138

= 67.375mmol

= 0.067375

Since n = 2

The mold of cl- that must be dissolved in the compartment

= 0.067375 x 2

= 0.13475 mols

How many grams of oxygen are needed to burn 10.0 moles of C3H8?

Answers

1.6 kilograms I think :)

Which of the following best describes what happens when an ionic bond forms?

Answers

Answer:

Electrons are shared when ionic bonds are formed

The statement which describes an ionic bond formation is  " a metal donates one or more of its electron to a non-metal.

What is an ionic bond?

An ionic bond is formed between two atoms by electron donating by one atom and gaining by the second atom. The electron donating element is electropositive and the electron accepting one is electronegative.

Normally the electropositive elements are metals of 1st or 2nd group of periodic table. They can make bond with non-metals like halogens and other electronegative elements like nitrogen, oxygen etc.

Therefore, the force of attraction which binds two atoms together in an ionic bond is formed by electron donation by a metal to a non-metal.

To learn more about ionic bond, refer the link below:

https://brainly.com/question/11527546

#SPJ2

Calculate the molarity of a MgSosolution
prepared by adding 0.37 moles of MgSO, to
enough water to make 11 of solution.
Answer in units of V.

Answers

Answer:

is

Explanation:

because

Name the type of ion formed by the atom when it loses three electrons. Show by illustration

Answers

aluminum atom is an atom that loses three electrons

Ions can be made by single element or covalently bonded group of elements. The covalently bonded group of elements is called polyatomic ions or polyatomic atoms. Therefore, Al³⁺ is the type of ion that is formed by the aluminium when it loses three electrons.

What is Ions?

Any species that contain charge whether it is positive charge or negative charge is called ions. The example of polyatomic ions are sulfate, phosphate, nitrate etc.

Cation is the species that loose electron and attain positive charge while anion is a species which gain electron and attains negative charge so when anion and cation combine in fixed ration the the overall charge of the molecule is zero that is molecule is neutral. Al³⁺ is the type of ion that is formed by the aluminium when it loses three electrons.

Therefore, Al³⁺ is the type of ion that is formed by the aluminium when it loses three electrons.

To learn more about ions, here:

https://brainly.com/question/13692734

#SPJ2

give the n for the following orbitals
a. 3p
b. 4f​

Answers

Answer:

a. n = 3

b. n = 4

Explanation:

n is just the number in front of the orbital, as n represents the energy level of the orbital.

Answer:

1. n=3

2.n=4

Explanation:n is the number infront of the orbital that representgsthe energy level

how is a simple cell constructed​

Answers

Answer:

a simple voltaic cell is made by immersing one zinc plate and one copper plate inside water diluted sulfuric acid solution.

the answer up there is right^^

7) What is the speed of a jet plane
that flies 7200 km in 9.5 hours?

Answers

Answer:

68,400

Explanation:

When the Sun and Moon are aligned in the same direction, the tides are higher than normal, known as________

Answers

Answer:

spring tides is the correct answer of your question

Hydrogen burns exothermically in oxygen

What is the energy given out during the reaction: 2H2 + O2 -> 2H2O?

Given:
H-H bond: 436 kJ/mol
O=O double bond: 498 kJ/mol
O-H bond: 464 kJ/mol

A. -3226 kJ/mol
B. -884 kJ/mol
C. -486 kJ/mol
D. -442 kJ/mol​

Answers

Answer:

C. -486 kJ/mol

Explanation:

Enthalpy change equals bonds broken (reactants) minus bonds formed (products)

Bonds broken = 2 H-H bonds + 1 O=O double bond = 2(436) +498 = 1,370 kJ/mol

Bonds formed = 4 O-H bonds = 4(464) = 1,856 kJ/mol

Bonds broken - bonds formed = 1,370 - 1,856 = -486 kJ/mol

What is the basic unit of structure and function in all living things? a cell b organism c atom d plasma

Answers

Answer:

A. Cell

Explanation:

Cells are basic units of structure and function in living things. This means that cells form the parts or an organism and carry out all of the an organism's processes, or functions.

how does someone get addicted to meth?

Answers

Whewww!! What class is this for



How much NaCl would you dissolve and dilute to the 100.00 mL mark in a volumetric flask with DI H2O to prepare a 0.825 M sodium chloride solution?

Answers

Answer:

4.82 g

Explanation:

To solve this problem we'll use the definition of molarity:

Molarity = moles / liters

We are given the volume and concentration (keep in mind that 100mL=0.100L):

0.825 M = moles / 0.100 L

Now we calculate the number of NaCl moles required:

moles = 0.0825 mol

Then we convert 0.0825 NaCl moles into grams, using its molar mass:

0.0825 mol * 58.44 g/mol = 4.82 g

What is the molarity of ZnCl, that forms when 20.0 g of zinc completely reacts with CuCl2, according to the following reaction? Assume a final
volume of 285 mL

Zn(s) + CuCl2(aq) → ZnCl2(aq) + Cu(s)

Answers

1.61m :) use the photo below

Balance the following equations:
C3H8 (g) + O2 (g) → CO2 (g) + H2O (g)
NH3 (g) O2 (g) NO2 (g) H2O (g)
Al(NO3) Na3S Al2S3 NaNO3

Answers

Explanation:

C3H8 + 502 ----> 3CO2 + 4H20

4NH3+7O2------> 4NO2+6H2O

2Al(NO3)3 + 3Na2S -------> Al2S3+6NaNO3

A balloon filled with helium has a volume of 30.0 L at a pressure of 100 kPa and a temperature of 15.0°C. What will the volume of the balloon be if the temperature is decreased to -80.0°C and the pressure remains constant?

Answers

Answer:

[tex]V_2=20.1L[/tex]

Explanation:

Hello there!

In this case, since this is a problem in which the pressure of the gas remains constant, we can use the Charles' law as a directly proportional relationship between temperature (in Kelvins) and volume given by:

[tex]\frac{V_2}{T_2} =\frac{V_1}{T_1}[/tex]

Thus, solving for the final volume as the temperature is decreased to -80.00 °C, we obtain:

[tex]V_2=\frac{V_1T_2}{T_1}[/tex]

[tex]V_2=\frac{30.0L*(-80+273)K}{(15+273)K} \\\\V_2=20.1L[/tex]

Best regards!

what prediction can i make about malaria

Answers

Answer:

A disease caused by a plasmodium parasite, transmitted by the bite of infected mosquitoes.

The severity of malaria varies based on the species of plasmodium.

Symptoms are chills, fever, and sweating, usually occurring a few weeks after being bitten.

People traveling to areas where malaria is common typically take protective drugs before, during, and after their trip. Treatment includes antimalarial drugs.

Explanation:

Which best describes why animals need the energy in food?
A for growth and body repair
B for transpiration and growth
C for body repair and photosynthesis
D for cell reproduction and transpiration

Answers

A for growth and body repair

Answer:

A for growth and body repair

Explanation:

B, C, and D don't have anything to do with animals.

What do melting, evaporation, and sublimation have in common?

Answers

Explanation:

Sublimation describes a solid turning directly into a gas. Melting, on the other hand, occurs when a solid turns into a liquid. Water can, under the right circumstances, sublimate, though it usually melts at temperatures above 0 degrees Celsius or 32 degrees Fahrenheit. Carbon dioxide (CO2), however, is very different. The conditions that determine whether CO2 melts or sublimates are both temperature and atmospheric pressure.

Identify each of the patterns labeled in the ridge pattern diagram

Answers

Answer: The suspected and crime scene fingerprint patterns are similar which means they belong to the same individual.

Explanation:

A:  Ending ridge between two lines forming a loop like structure common in both suspected and crimes scene patterns.

B: Bifurcation which includes the formation of fork like shape of the ridge.

C: Island is a dot or point like structure which is common in both patterns.

D: It includes delta which is seen in the case of loop and whorl patterns of the fingerprint in loop there is only one delta and in case of whorl there are two deltas. The delta have an island and a bifurcation in it which is common in both patterns of the fingerprints.

E: Intersection occurs when two ridges changes their directions. It is common in the two patterns.

What will happen if you heat aliquid to high temperatures?

Answers

Answer:

An increase in the temperature of a liquid causes an increase in the average speed of its molecules. As the temperature of a liquid increases, the molecules move faster thereby increasing the liquid's kinetic energy.

An increase in temperature

Mg(OH)2 is a compound. How many different elements are found in this compound?
Ο Α. 1
ОВ. 3 3
O c. 2

Answers

Answer:

3

Explanation:

3 different elements are found

Mg - magnesium

O -oxygen

H - hydrogen

'

mark brainliest

Answer: 3

Explanation:

A compound contains 53% Al and 47% O by mass. What
is the empirical formula of this compound?

Answers

Answer:

Al2O3

Explanation:

Empirical formula is found by converting percent composition into a mole ratio.

First, assume you have a 100g sample of the substance. This allows you to make your percent composition into grams.

100% = 100g

53% = 53g Al

47% = 47g O

Next, divide each substance's mass by their molar mass. This converts your number to moles.

[tex]53g Al / 27g Al = 1.96 mol\\\\47g O/16g O = 2.93mol[/tex]

Next, divide both mol answers by the smallest number of moles.

[tex]1.96mol/1.96mol = 1\\2.93mol/1.96mol = 1.5[/tex]

Usually, these answers would be your subscripts for your empirical formula. However, we cannot have a decimal subscript, so we will multiply our answers by a factor of 2 to get to a whole number. This gives us 2 moles of Al and 3 moles of oxygen, or a formula of Al2O3.

Considering the definition of empirical formula, the correct answer is the second option: the empirical formula is Al₂O₃.

Definition of empirical formula

The empirical formula is the simplest expression to represent a chemical compound, which indicates the elements that are present and the minimum proportion in whole numbers that exist between its atoms, that is, the subscripts of chemical formulas are reduced to the most integers. small as possible.

Empirical formula in this case

Assuming a 100 grams sample, the percentages match the grams in the sample. So you have 53 grams of Al and 47 grams of O.

Then it is possible to calculate the number of moles of each atom in the molecule, taking into account the corresponding molar mass:

Al: [tex]\frac{53 grams}{27 \frac{grams}{mole} }[/tex]= 1.9629 moles

O: [tex]\frac{47 grams}{16 \frac{grams}{mole} }[/tex]= 2.9375 moles

The empirical formula must be expressed using whole number relationships, for this the numbers of moles are divided by the smallest result of those obtained. In this case:

Al: [tex]\frac{1.9629 moles}{1.9629 moles}[/tex]= 1

O: [tex]\frac{2.9375 moles}{1.9629 moles}[/tex]≅ 1.5

You cannot have a decimal subscript, so you will multiply our answers by a factor of 2 to get to a whole number:

Al: 1× 2= 2

O: 1.5× 2= 3

Therefore the Al:O mole ratio is 2: 3

Finally, the correct answer is the second option: the empirical formula is Al₂O₃.

Learn more about empirical formula:

brainly.com/question/5115389?referrer=searchResults

brainly.com/question/4594902?referrer=searchResults

brainly.com/question/13725914?referrer=searchResults

brainly.com/question/13112542?referrer=searchResults

If a small pig runs 46 meters in 6 seconds, what is the pig's average speed?
6 m/s
276 m/s
7 m/s
48 m/s

Answers

Answer:

the pig's average speed is 7 m/s

The average speed of a moving body is the ratio of the distance travelled to the time of travel. Here, the speed of the pig running 46 meters in 6 seconds is 7.6 m/s.

What is average speed ?

The speed of an object is a physical quantity that measures the distance travelled by the object per unit time. Hence, it is the ratio of distance travelled to the  time taken for the travel. The rate of speed is called velocity. Bot are having the standard unit of m/s.

Given that,

distance covered by the pig = 46 meters

time taken = 6 seconds

speed  = distance/time.

Average speed of the pig = 46 meters/ 6 seconds = 7.6 m/s.

Therefore, if the small pig runs 46 meters in 6 seconds, it is having an average speed of 7.6 m/s.

Find more on average speed :

https://brainly.com/question/12322912

#SPJ6

Other Questions
A savings account earns 8% interest each year, compounded quarterly (4 times a year). If a person invests $100 and makes no further deposits or withdrawals, what is the balance in the account after 3 years? The author would most likely agree with the idea thatOA.hip flexors are important for running and walking but not sitting,OB, slouching keeps the abdominal muscles and hip flexors loose,C.only athletes and senior citizens should worry about hip flexors.ODsitting at a computer all day can cause health problems. What is the slope of the line that passes through the points (6, 4) and (3, 8)?-4/3-3/43/44/3 A company purchased equipment valued at $190,000. It traded in old equipment for a $108,000 trade-in allowance and the company paid $82,000 cash with the trade-in. The old equipment cost $170,000 and had accumulated depreciation of $68,000. This transaction has commercial substance. What is the recorded value of the new equipment Treaty of Versailles please help and no links or Im going to go crazy Please help. ASAP!What most likely happens when water loses heat? It changes into ice. It changes into vapor. Its temperature increases. Its temperature remains constant. I just got a Switch. FINALLY! I can play pokemon :) Which aquatic organism would be least likely to survive in a A flask with a volume of 1.50 L, provided with a stopcock, contains ethane gas 1C2H62 at 300 K and atmospheric pressure 11.013 * 105 Pa2. The molar mass of ethane is 30.1 g>mol. The system is warmed to a temperature of 550 K, with the stopcock open to the atmosphere. The stopcock is then closed, and the flask is cooled to its original temperature. (a) What is the final pressure of the ethane in the flask on a map 2.5 inch represents 16 miles. if the distance between two cities on the map is 8.75 inches, how far apart are the cities. and pls show work Please helppppp I need it! How to say to not be late in Spanish?!?! 7. Explain how you have had cognitive dissonance in your life? What impact does the storm have on the plot?causes the conspirators to move up their planmakes Cassius more confident about what he has in mindprovides time to mourn Pompey's deathprevents anyone from attending the plannedmeeting What causes water to move from the liquid part of the hydrosphere to the cryosphere?A. The water loses gravitational energy. B. The water loses thermal energy. C. The water gains thermal energy, D. The water gains gravitational energy, The data is shown below:91, 48, 86, 49, 77, 86, 64, 78What is the median?a. 72.37b. 74c. 86 Which is a simplified form of the expression -9(y + 1) + 5y? Find the product.(2x^2 - 4x + 1)(5x-7)10x^3 - 34x^2 + 33x - 77x^3 - 20x^2 + 33x - 710x^3 - 6x^2 - 23x - 710x^3 + 6x^2 - 20x-7 Laura borrowed $490 at 11% for 6 years. what was the total interest? Other than museums and galleries, list two places a curator might work?