Solve for � n. 2 − 1 2 � = 3 � + 16 2− 2 1 ​ n=3n+162, minus, start fraction, 1, divided by, 2, end fraction, n, equals, 3, n, plus, 16 � = n, equals

The only option that represents power of power exponents rule is option B: (x^a)^b = x^(ab)

The exponent of a number says how many times to use the number in a multiplication.

There are different laws of exponents such as:
Zero Exponent Law: a^0 = 1.

Identity Exponent Law: a^1 = a.

Product Law: a^m × a^n = a^(m+n)

Quotient Law: a^m/a^n = a^(m-n)

Negative Exponents Law: a^(-m) = 1/a^(m)

Power of a Power: (a^m)^n = a^(mn)

Power of a Product: (ab)^(m) = a^mb^m

Power of a Quotient: (a/b)^m = a^m/b^m

Using power of power exponents rule, we can say that only option B is correct because:

(x^a)^b = x^(ab)

Read more about Laws of Exponents at: https://brainly.com/question/11761858

#SPJ1

either the additivity nor the homogeneity properties are satisfied, L(x) is not a linear transformation from R³ to R².

To determine if L(x) is a linear transformation from R³ to R², we need to check if it satisfies the two properties of linear transformations:

1. Additivity: L(x + y) = L(x) + L(y)
2. Homogeneity: L(cx) = cL(x), where c is a scalar.

Given L(x) = (1 + x₁, x₂)ᵀ, let x = (x₁, x₂, x₃) and y = (y₁, y₂, y₃). Also, let cx = (cx₁, cx₂, cx₃).

Now let's check both properties:

1. Additivity:

L(x + y) = L((x₁ + y₁, x₂ + y₂, x₃ + y₃)) = (1 + (x₁ + y₁), x₂ + y₂)ᵀ

L(x) + L(y) = (1 + x₁, x₂)ᵀ + (1 + y₁, y₂)ᵀ = (2 + x₁ + y₁, x₂ + y₂)ᵀ

Since L(x + y) ≠ L(x) + L(y), the additivity property is not satisfied.

2. Homogeneity (this step is not necessary, as the additivity property already failed, but let's check it for completeness):

L(cx) = L((cx₁, cx₂, cx₃)) = (1 + cx₁, cx₂)ᵀ

cL(x) = c(1 + x₁, x₂)ᵀ = (c + cx₁, cx₂)ᵀ

Since L(cx) ≠ cL(x), the homogeneity property is also not satisfied.

Since neither the additivity nor the homogeneity properties are satisfied, L(x) is not a linear transformation from R³ to R².

To know more about linear transformation refer here:

https://brainly.com/question/13005179

#SPJ11

The mean of the binomial variable is 28 and the standard deviation is 2.72, given a probability of success of 0.7 with a total number of attempts of 40.

To calculate the mean (μ) and standard deviation (σ) of a binomial variable, we use the following formulas

μ = np

σ = sqrt(np × (1-p))

where n is the number of trials, and p is the probability of success for each trial.

In this case, the probability of success is 0.7, the number of trials is 40. So:

μ = 400.7 = 28

σ = sqrt(400.7 × (1-0.7)) = 2.72

Therefore, the mean of the binomial variable is 28, and the standard deviation is 2.72

Learn more about standard deviation here

brainly.com/question/23907081

#SPJ4

The formula for y = f(x - 14) in terms of the variable x is y = (1/3)(x - 14)^2. To sketch the graph, draw a parabola and shift it 14 units to the right.

(a) To get a formula for y = f(x - 14) in terms of the variable x, substitute (x - 14) for x in the given function f(x) = (1/3)x^2:
y = f(x - 14) = (1/3)(x - 14)^2
(b) To sketch a graph of y = f(x - 14) using graph transformations, consider that the original function f(x) = (1/3)x^2 is a parabola. The transformation f(x - 14) shifts the graph 14 units to the right. Unfortunately, I cannot provide or select a graph letter from A-E, as there are no graphs provided here. However, to sketch it on paper, draw a parabola and shift it 14 units to the right.

Learn more about variable here, https://brainly.com/question/28248724

#SPJ11

The formula for the probability mass function of X, the number of tagged fish in the researcher's sample, can be represented as P(X=x) = (C(80, x) * C(520, 15-x)) / C(600, 15).

Explanation:

Given that: A lake contains 600 fish, eighty (80) of which have been tagged by scientists. A researcher randomly catches 15 fish from the lake.

To Find a formula for the probability mass function of X, the number of fish in the researcher's sample which is tagged, Follow these steps:

Step 1: To find the probability mass function (PMF) for X, the number of tagged fish in the researcher's sample, you can use the hypergeometric distribution formula. In this scenario:

N = Total number of fish in the lake (600)
K = Number of tagged fish in the lake (80)
n = Number of fish in the researcher's sample (15)
x = Number of tagged fish in the researcher's sample (X)

Step 2: The PMF formula for the hypergeometric distribution is:

P(X=x) = (C(K, x) * C(N-K, n-x)) / C(N, n)

where C(a, b) represents the number of combinations of selecting b items from a total of items.

Step 3: In this case, the probability mass function for X, the number of tagged fish in the researcher's sample, can be represented as:

P(X=x) = (C(80, x) * C(600-80, 15-x)) / C(600, 15)

P(X=x) = (C(80, x) * C(520, 15-x)) / C(600, 15)

Know more about the probability mass function click here:

https://brainly.com/question/30765833

#SPJ11

To find the determinant using elementary row or column operations, we can use the following steps:

1. Rewrite the matrix in an augmented form with the identity matrix on the right:

3 -3 -2 | 1 0 0
3 1 2 | 0 1 0
-6 6 4 | 0 0 1

2. Use elementary row operations to transform the matrix into an upper triangular form:

R2 = R2 - R1
R3 = R3 + 2R1
R3 = R3 + 2R2

3 -3 -2 | 1 0 0
0 4 4 | -1 1 0
0 0 0 | -2 2 1

3. The determinant of an upper triangular matrix is the product of its diagonal elements:

det(A) = 3 x 4 x 0 = 0

Therefore, the determinant of the original matrix is 0.

https://brainly.com/question/31485592
#SPJ11

Derivative dy/dx by implicit differentiation is dy/dx = -2xy / (x^2 - 8y^3)

To find dy/dx using implicit differentiation, we differentiate both sides of the given equation with respect to x, using the chain rule for the terms involving y:

d/dx (x^2y - 2y^4) = d/dx (-6)

Using the product rule, we get:

2xy + x^2(dy/dx) - 8y^3(dy/dx) = 0

Now we can solve for dy/dx:

(dy/dx)(x^2 - 8y^3) = -2xy

dy/dx = -2xy / (x^2 - 8y^3)

So the derivative dy/dx can be expressed in terms of both x and y.

Learn more about implicit differentiation

brainly.com/question/11887805

#SPJ11

The solution to the system of equations is (x, y) = (1, 3).

We have,

We use the elimination method on the two equations:

-3x + 4y = 9

2x + 4y = 14

We can eliminate y by subtracting the second equation from the first equation:

-3x + 4y - (2x + 4y) = 9 - 14

Simplifying the left side and the right side, we get:

-5x = -5

Dividing both sides by -5, we get:

x = 1

Let's use the first equation:

-3x + 4y = 9

Substituting x = 1.

-3(1) + 4y = 9

Simplifying and solving for y.

4y = 12

y = 3

Therefore,

The solution to the system of equations is (x, y) = (1, 3).

Learn more about equations here:

https://brainly.com/question/17194269

#SPJ1

Answer: Length=24ft Width=6ft

Step-by-step explanation:

Perimeter= 2L+2W= 10 W= 60 and W=6ft and L=24ft

Area= Length x Width

Okay, let's break this down step-by-step:

* f(x) = -4x3 + 15 (this is the original function)

* We want to find f(x) when x = 3

* So substitute 3 in for x:

f(3) = -4(3)3 + 15

f(3) = -81 + 15

f(3) = -66

Therefore, f(x) = -66 when x = 3.

[tex]\sf f(3)=-66.[/tex]

[tex]\sf f(3)=-4(3)^{3} +15\\ \\[/tex]

[tex]\sf f(3)=-4(3*3*3) +15\\\\\sf f(3)=-4(27) +15[/tex]

[tex]\sf f(3)=-81+15[/tex]

[tex]\sf f(3)=-66.[/tex]

-------------------------------------------------------------------------------------------------------

Learn more about evaluating expressions here:

https://brainly.com/question/28308470

https://brainly.com/question/28308627

https://brainly.com/question/29956968

https://brainly.com/question/31741972

The exponential distribution is a special case of the gamma distribution with alpha = 1, not 0.

False.

The exponential distribution is a special case of the gamma distribution when the shape parameter (alpha) is equal to 1, not 0.

The probability density function (pdf) of the gamma distribution with shape parameter alpha and rate parameter beta is:

f(x) = (1/((beta^alpha)*gamma(alpha))) * (x^(alpha-1)) * (e^(-x/beta))

When alpha = 1, this reduces to the exponential distribution with rate parameter lambda = 1/beta:

f(x) = lambda * e^(-lambda*x)

So the exponential distribution is a special case of the gamma distribution with alpha = 1, not 0.

To learn more about distribution visit:

https://brainly.com/question/31197941

#SPJ11

Since the least square curve fit method is a flexible method for approximating the best fit to a given set of data points using several mathematical models, all of these models are suitable.

The applicable model for the least square curve fit depends on the type of data being analyzed. In this case, the question mentions a sinusoidal model as one of the options. Therefore, a least square curve fit can fit data points to a sinusoidal model, which includes sine and cosine functions. However, it may not necessarily be able to fit the data points to an exponential model, polynomial model of appropriate order, or power curve.
Least square curve fit can fit the data points to the following models:

a) sinusoidal model (including sine and cosine functions)
b) exponential model
c) polynomial model of appropriate order
d) power curve ([tex]y=c1x^(c2)[/tex])

All of these models are applicable because the least square curve fit method is a versatile technique for approximating the best fit to a given set of data points using different mathematical models.

Learn more about curve here:

https://brainly.com/question/24446378

#SPJ11

Since the least square curve fit method is a flexible method for approximating the best fit to a given set of data points using several mathematical models, all of these models are suitable.

The applicable model for the least square curve fit depends on the type of data being analyzed. In this case, the question mentions a sinusoidal model as one of the options. Therefore, a least square curve fit can fit data points to a sinusoidal model, which includes sine and cosine functions. However, it may not necessarily be able to fit the data points to an exponential model, polynomial model of appropriate order, or power curve.
Least square curve fit can fit the data points to the following models:

a) sinusoidal model (including sine and cosine functions)
b) exponential model
c) polynomial model of appropriate order
d) power curve ([tex]y=c1x^(c2)[/tex])

All of these models are applicable because the least square curve fit method is a versatile technique for approximating the best fit to a given set of data points using different mathematical models.

Learn more about curve here:

https://brainly.com/question/24446378

#SPJ11

Answer:

^5-144p^3 = p^3(p^2-144)= p^3(p-12)(P +12

The value of x in the given composite figure is 11.31 units.

In accordance with the Pythagorean theorem, the square of the length of the hypotenuse (the side that faces the right angle) in a right triangle equals the sum of the squares of the lengths of the other two sides. If you know the lengths of the other two sides of a right triangle, you may apply this theorem to determine the length of the third side. By examining whether the sides of a triangle satisfy the Pythagorean equation, it can also be used to assess whether a triangle is a right triangle. Pythagoras, an ancient Greek mathematician, is credited with discovering the theorem, therefore it bears his name.

The given figure can be divided into a rectangle and a triangle.

The dimensions of the triangle are:

h = 18 - 10 = 8 units

b = 8

Now, using the Pythagoras Theorem we have:

x² = 8² + 8²

x² = 64 + 64

x² = 128

x = 11.31

Hence, the value of x in the given composite figure is 11.31 units.

Learn more about Pythagoras Theorem here:

https://brainly.com/question/343682

#SPJ1

Sine function value as 190°. θ = 350°

Cosine function value as 190°. θ = 170°.

Rotational Symmetry: A figure is said to have rotational symmetry if it looks exactly the same after rotating it some angle less than

360∘ (a full rotation).

θ angle with 0° < θ < 360° that I has the same:

sin θ is symmetric over the y-axis and cos θ is symmetric over the x-axis.

This means that if you reflect a point (cos θ, sin θ) over the y-axis, the value of sin θ will not change.

If we reflect the angle of 190° over the y-axis we get 350°

If we reflect the angle of 190° over the x-axis we get 170°

Therefore the answers are 350° and 170°.

Learn more about Angle of rotation at:

https://brainly.com/question/29779210

#SPJ4

Answer:

1. sin(A) = [tex]\frac{4}{5}[/tex]

2. cos(A) = [tex]\frac{3}{5}[/tex]

3. tan(A) = [tex]\frac{4}{3}[/tex]

4. sin(B) = [tex]\frac{3}{5}[/tex]

5. cos(B) = [tex]\frac{4}{5}[/tex]

6. tan(B) = [tex]\frac{3}{4}[/tex]

Step-by-step explanation:

Use SOHCAHTOA:

Sine = Opposite/Hypotenuse, Cosine = Adjacent/Hypotenuse, Tangent = Opposite/Adjacent.

1. sin(A) = opposite of A / hypotenuse of A = [tex]\frac{4}{5}[/tex]

2. cos(A) = adjacent of A / hypotenuse of A = [tex]\frac{3}{5}[/tex]

3. tan(A) = opposite of A / adjacent of A = [tex]\frac{4}{3}[/tex]

4. sin(B) = opposite of B / hypotenuse of B = [tex]\frac{3}{5}[/tex]

5. cos(B) = adjacent of B / hypotenuse of B = [tex]\frac{4}{5}[/tex]

6. tan(B) = opposite of B / adjacent of B = [tex]\frac{3}{4}[/tex]

The function y = x(100 - x²) is increasing on the intervals (-∞, -10/√3) ∪ (10/√3, ∞), and decreasing on the interval (-10/√3, 10/√3).

To determine the intervals on which the function y = x(100 - x^2) is increasing or decreasing, we need to find its first derivative and determine its sign.

y' = 100 - 3x²

To find the critical points, we set y' = 0 and solve for x:

These are the critical points.

Now, we test the intervals between them:

Therefore, the function is

Learn more about intervals function increasing or decreasing

brainly.com/question/29197921

#SPJ11

the value of the given double integral is 150

To evaluate this double integral, we first identify it as the volume of a solid. In this case, the region r represents a rectangle in the xy-plane with dimensions 6 units (from x = -3 to x = 3) and 5 units (from y = 3 to y = 8). The given integral represents the volume of a rectangular prism, where the height is given by the constant value 5.

The given double integral of 5 da represents the volume of a solid over the rectangular region r = {(x, y) | −3 ≤ x ≤ 3, 3 ≤ y ≤ 8}.

To evaluate this double integral, we integrate the given constant 5 over the given region:

∬r 5 da = ∫₃⁸ ∫₋³³ 5 dx dy

Integrating with respect to x first, we get:

∫₋³³ 5 dx = 5x ∣₋³³ = 5(3) - 5(-3) = 30

Substituting this value and integrating with respect to y, we get:

∫₃⁸ 30 dy = 30y ∣₃⁸ = 30(8) - 30(3) = 150

Therefore, the value of the given double integral is 150.

To know more about Double Integral refer here:

https://brainly.com/question/30217024

#SPJ11

The value of x in the inscribing circle is 12.

We are given that;

∠RTN as an inscribed angle and ∠RWN as a central angle that subtend the same arc.

We have:

m∠RTN = 21​m∠RWN

Plugging in the given values, we get:

(2x+3)∘=21​(54)∘

Simplifying, we get:

2x+3=27

Subtracting 3 from both sides, we get:

2x=24

Dividing both sides by 2, we get:

x=12

Therefore, by the inscribing circle the answer will be 12.

Learn more about inscribing circle here:

https://brainly.com/question/17043518

#SPJ1

To prove that δqrev in equation 6.1 is not an exact differential, we can use the criterion developed in math chapter d. The criterion states that if a differential equation is exact, then its partial derivatives must satisfy the condition ∂M/∂y = ∂N/∂x.

In equation 6.1, δqrev is defined as δqrev = TdS. If we express δqrev in terms of its partial derivatives, we get:
∂(δqrev)/∂S = T
∂(δqrev)/∂T = S

Now, let's calculate the partial derivatives of ∂(∂(δqrev)/∂S)/∂T and ∂(∂(δqrev)/∂T)/∂S:
∂(∂(δqrev)/∂S)/∂T = ∂T/∂S = 0 (since T does not depend on S)
∂(∂(δqrev)/∂T)/∂S = ∂S/∂T = 0 (since S does not depend on T)

Since these partial derivatives are equal to zero, we can conclude that δqrev is not an exact differential, as it does not satisfy the condition ∂M/∂y = ∂N/∂x.

Therefore, we have proven that δqrev in equation 6.1 is not an exact differential.

To learn more about “partial derivatives” refer to the https://brainly.com/question/31399205

#SPJ11

a) To find the value of β that satisfies limt→[infinity]y(t) = 0, we can first find the general solution of the differential equation. So the value(s) of β for which the solution y(t) is never equal to 0 for all t is [tex]β ∈ (-∞, -2) U (-2/3, ∞)[/tex]

The characteristic equation is [tex]r^2 + r - 2 = 0[/tex], which has roots r = 1 and r = -2.

Therefore, the general solution is[tex]y(t) = c1e^t + c2e^-2t.[/tex]

Using the initial conditions y(0) = 2 and y'(0) = β, we can solve for the constants c1 and c2:

[tex]c1 + c2 = 2[/tex]

[tex]c1 - 2c2 = β[/tex]

Solving this system of equations, we get [tex]c1 = 2 - β/3[/tex] and [tex]c2 = β/3.[/tex]

Therefore, the solution is y(t) =[tex](2 - β/3)e^t[/tex] + [tex]β/3)e^-2t[/tex]. To satisfy limt→[infinity]y(t) = 0, we need the coefficient of e^t to be 0, which gives us 2 - β/3 = 0. Solving for β, we get β = 6.

So the value of β that satisfies limt→[infinity]y(t) = 0 is β = 6.

b) To find the value(s) of β for which the solution y(t) is never equal to 0 for all t, we can use the fact that the discriminant of the characteristic equation determines the nature of the roots.

In this case, the characteristic equation is r^2 + r - 2 = 0, which has roots r = 1 and r = -2. These are distinct real roots, so the general solution is y(t) = [tex]c1e^t + c2e^-2t.[/tex]

For y(t) differential equation to never be equal to 0 for all t, we need both constants c1 and c2 to be nonzero. Using the initial condition y(0) = 2, we get c1 + c2 = 2.

Using the second initial condition y'(0) = β, we get c1 - 2c2 = β.

Solving these equations, we get [tex]c1 = (2β + 4)/5[/tex] and [tex]c2 = (6 - β)/5.[/tex]

Therefore, y(t) is never equal to 0 for all t if and only if both c1 and c2 are nonzero, which is true if and only if the coefficients satisfy the inequality (2β + 4)(6 - β) ≠ 0. Solving this inequality, we get [tex]β ∈ (-∞, -2) U (-2/3, ∞).[/tex]

To learn more about differential equation, visit here

https://brainly.com/question/31583235

#SPJ4

The function f(x) that satisfies f ''(x) = 24x³ − 15x² + 8x is:

f(x) = (6/5)x⁵ - (5/4)x⁴ + (4/3)x³ + C₁x + C₂ [where C₁ and C₂ are arbitrary constants].

Integration is a fundamental concept in calculus that involves finding the antiderivative or the indefinite integral of a function.

More specifically, integration is the process of determining a function whose derivative is the given function.

To find f(x) from f ''(x), we need to integrate f ''(x) twice, since the first antiderivative will give us the derivative of the function f(x), and the second antiderivative will give us f(x) up to two arbitrary constants of integration.

First, we integrate f ''(x) with respect to x to get the first antiderivative f '(x):

f '(x) = ∫ f ''(x) dx = 24∫ x³ dx - 15∫ x² dx + 8∫ x dx

f '(x) = 24(x⁴/4) - 15(x³/3) + 8(x²/2) + C₁

f '(x) = 6x⁴ - 5x³ + 4x² + C₁

where C₁ is the constant of integration.

Next, we integrate f '(x) with respect to x to get f(x):

f(x) = ∫ f '(x) dx = ∫ (6x⁴ - 5x³ + 4x² + C₁) dx

f(x) = (6/5)x⁵ - (5/4)x⁴ + (4/3)x³ + C₁x + C₂

where C₂ is the constant of integration.

To know more about antiderivative visit:

https://brainly.com/question/30764807

#SPJ1

The function f(x) that satisfies f ''(x) = 24x³ − 15x² + 8x is:

f(x) = (6/5)x⁵ - (5/4)x⁴ + (4/3)x³ + C₁x + C₂ [where C₁ and C₂ are arbitrary constants].

Integration is a fundamental concept in calculus that involves finding the antiderivative or the indefinite integral of a function.

More specifically, integration is the process of determining a function whose derivative is the given function.

To find f(x) from f ''(x), we need to integrate f ''(x) twice, since the first antiderivative will give us the derivative of the function f(x), and the second antiderivative will give us f(x) up to two arbitrary constants of integration.

First, we integrate f ''(x) with respect to x to get the first antiderivative f '(x):

f '(x) = ∫ f ''(x) dx = 24∫ x³ dx - 15∫ x² dx + 8∫ x dx

f '(x) = 24(x⁴/4) - 15(x³/3) + 8(x²/2) + C₁

f '(x) = 6x⁴ - 5x³ + 4x² + C₁

where C₁ is the constant of integration.

Next, we integrate f '(x) with respect to x to get f(x):

f(x) = ∫ f '(x) dx = ∫ (6x⁴ - 5x³ + 4x² + C₁) dx

f(x) = (6/5)x⁵ - (5/4)x⁴ + (4/3)x³ + C₁x + C₂

where C₂ is the constant of integration.

To know more about antiderivative visit:

https://brainly.com/question/30764807

#SPJ1

The correct answer is option C, which includes the sets Z⁺, Z⁻, and {0}. These sets are non-overlapping and together they cover all of the integers in Z, forming a partition. (C)

Z⁺ includes all positive integers, Z⁻ includes all negative integers, and {0} includes only the number 0. Each integer in Z belongs to exactly one of these sets.

Option A, ZZ⁻ and {0}, is not a partition because it includes 0 in both sets, violating the requirement that sets in a partition be non-overlapping.

Option B, Z and Z⁻, also does not form a partition because it does not include any positive integers. Option D, Z⁺ and Z⁻, does not include {0} and therefore does not cover all of the integers in Z.(C)

To know more about sets click on below link:

https://brainly.com/question/30096154#

#SPJ11

The number of  distinguishable code symbols can be formed with the letters for the words philosophical and mathematics is 24

Permutation is a mathematical technique that determines the number of possible arrangements in a set when the order of the arrangements matters.

In the word philosophical , There are 13 letters

2ps, 2is, 2Os, 2Hs and in Mathematics, there are = 11 letters

2ms, 2ts, 2As,

Therefore the number of permutations is 2!212!2! and 2!2!2!

This imples 16 + 8

Therefore, the number of distinguishable code symbols can be formed with the letters for the words philosophical and mathematics = 24

Learn more about permutation on https://brainly.com/question/30649574

#SPJ1

The portobello mushroom was growing faster.

Given that, Andrew has two mushrooms, he recorded their height, enoki mushroom was 3.9 centimeters tall, after 5 days, it was 4.8 centimeters tall.

Also, the height of the portobello mushroom is given by equation,

y = 0.2x + 4.1, where y is the height of the portobello mushroom in centimeters and x is the number of days since he brought it,

So,

Considering the portobello mushroom height, after 5 days,

y = 0.2(5) + 4.1 = 5.1 cm

And the enoki mushroom was 4.8 cm tall on its 5th day,

Since, the height of portobello mushroom is more than enoki mushroom on 5th day.

Hence, the portobello mushroom was growing faster.

Learn more about comparison, click;

https://brainly.com/question/25799464

#SPJ1

If function f(x)=10(3)2x−2, then f(0) = 10/9.

Explanation:

Step 1: To evaluate f(0), we can substitute x with 0 in the given function f(x) = 10(3)^(2x-2).

f(0) = 10(3)^(2(0)-2) = 10(3)^(-2)

Step 2: Now we know that a^(-n) = 1/a^n. So, we can rewrite 3^(-2) as 1/3^2.

f(0) = 10 * (1/3^2) = 10 * (1/9)

Finally, f(0) = 10/9.

Know more about the function click here:

https://brainly.com/question/12748855

#SPJ11

The area of the circle in polar coordinates is 16π square units.

To calculate the area of the circle in polar coordinates, we can use the following steps:

Step 1:   Convert the equation of the circle from rectangular coordinates to polar coordinates.

In polar coordinates, the conversion formulas are:

x = r * cos(θ)

y = r * sin(θ)

Given the equation of the circle as r = 8 * cos(θ), we can rewrite it in polar coordinates as:

r = 8 * cos(θ)

Step 2:   Determine the limits of integration for θ.

The limits of integration for θ will depend on the range of values that allow the circle to be fully traced out.

Since r = 8 * cos(θ), the maximum value of r occurs when cos(θ) is at its minimum value, which is -1.

Therefore, the circle is fully traced out when θ ranges from 0 to π.

Step 3:   Set up the integral to calculate the area.

The area of a circle in polar coordinates is given by the formula:

A =  ∫[r(θ)]² * (1/2) dθ

Plugging in r = 8 * cos(θ), and the limits of integration for θ as 0 to π, we get:

A = ∫[8 * cos(θ)]² * (1/2) dθ from θ = 0 to θ = π

Simplifying, we get:

A = (1/2) * ∫[64 * cos²(θ)] dθ from θ = 0 to θ = π

Step 4:    Evaluate the integral and calculate the area.

Usingen trigonometric idtity, cos²(θ) = (1 + cos(2θ))/2, we can rewrite the integral as:

A = (1/2) * ∫[64 * (1 + cos(2θ))/2] dθ from θ = 0 to θ = π

Simplifying further, we get:

A = (1/4) * ∫[64 + 64 * cos(2θ)] dθ from θ = 0 to θ = π

Now we can integrate term by term:

A = (1/4) * [64θ + 32 * sin(2θ)] from θ = 0 to θ = π

Plugging in the limits of integration, we get:

A = (1/4) * [64π + 32 * sin(2π)] - (1/4) * [0 + 32 * sin(0)]

Since,

sin(0) = 0 and sin(2π) = 0, we can simplify further:

A = (1/4) * 64π

Finally, we can simplify and express the area in terms of π:

A = 16π

So, the area of the circle with the equation r = 8 * cos(θ) in polar coordinates is 16π square units.

Learn more about Area of Circle

brainly.com/question/28642423

#SPJ11

Therefore, the probability that a randomly selected passenger has a waiting time less than 2.75 minutes is 0.55.

Since the waiting times between subway departure schedule and passenger arrival are uniformly distributed between 0 and 5 minutes, the probability density function of the waiting time can be expressed as:

f(x) = 1/5 for 0 <= x <= 5

0 otherwise

To find the probability that a randomly selected passenger has a waiting time less than 2.75 minutes, we need to calculate the area under the probability density function from 0 to 2.75:

P(X < 2.75) = ∫[0, 2.75] f(x) dx

= ∫[0, 2.75] (1/5) dx

= (1/5) [x]_[0, 2.75]

= (1/5) * 2.75

= 0.55

To know more about probability,

https://brainly.com/question/30034780

#SPJ11

Systematic sampling is a sampling plan that selects every nth item from the population. Therefore the correct option is (d) Systematic

Systematic sampling is a statistical sampling method that involves selecting every nth item from the population to create a representative sample. This sampling method is useful when the population is large and ordered in some way, such as in a list or sequence.

To conduct a systematic sample, researchers select a starting point at random and then choose every nth item from that point forward until the desired sample size is reached. The advantage of systematic sampling is that it is simpler and more efficient than other sampling methods, such as simple random sampling, while still providing a representative sample of the population.

Therefore, the correct option is (d) systematic

Learn more about systematic sampling here

brainly.com/question/28975411

#SPJ4

The derivative of y with respect to x is:

[tex]y' = [(5x) / (5x^2 + 9y^2)] + [(9y) / (5x^2 + 9y^2)] * dy/dx[/tex]

or

[tex]dy/dx = [(5x) / (5x^2 + 9y^2)] + [(9y) / (5x^2 + 9y^2)] * y'[/tex]

To find y', we need to use the chain rule of differentiation because we have a composite function (i.e., the natural logarithm function is applied to a function of x and y).

Let's start by applying the chain rule:

[tex]y' = d/dx [ln(5x^2 + 9y^2)]y' = (1 / (5x^2 + 9y^2)) * d/dx [5x^2 + 9y^2][/tex]

Now, we need to apply the chain rule to find the derivative of[tex]5x^2 + 9y^2[/tex]with respect to x:

[tex]d/dx [5x^2 + 9y^2] = d/dx [5x^2] + d/dx [9y^2][/tex]

[tex]d/dx [5x^2] = 10x[/tex]

[tex]d/dx [9y^2] = 18y * dy/dx[/tex]

(Note that we used the chain rule again to find [tex]dy/dx.)[/tex]

Substituting these derivatives into the expression for y', we get:

[tex]y' = (1 / (5x^2 + 9y^2)) * (10x + 18y * dy/dx)[/tex]

Finally, we can simplify this expression by solving for dy/dx:

[tex]y' = (10x + 18y * dy/dx) / (5x^2 + 9y^2)[/tex]

Multiplying both sides by (5x^2 + 9y^2), we get:

[tex]y' * (5x^2 + 9y^2) = 10x + 18y * dy/dx[/tex]

Solving for dy/dx, we obtain:

[tex]dy/dx = (y' * (5x^2 + 9y^2) - 10x) / 18y[/tex]

Therefore, the derivative of y with respect to x is:

[tex]y' = [(5x) / (5x^2 + 9y^2)] + [(9y) / (5x^2 + 9y^2)] * dy/dx[/tex]

or

[tex]dy/dx = [(5x) / (5x^2 + 9y^2)] + [(9y) / (5x^2 + 9y^2)] * y'[/tex]

To learn more about expression visit:

https://brainly.com/question/14083225

#SPJ11