shape of the sulfur pentafluoryl sf5 cation

The molecular formula for toluene is C7H8. It consists of a benzene ring with a methyl group (-CH3) attached to it.

Toluene is an aromatic compound and has two resonance structures, which are equivalent representations of the molecule. In one structure, the double bond between two carbon atoms of the benzene ring is broken, and one carbon has a positive charge while the other has a negative charge. In the other structure, the double bond between two different carbon atoms of the ring is broken, and the methyl group carries a positive charge. These resonance structures show the delocalization of electrons in the benzene ring, making it a more stable molecule.

Learn more about molecular formula here:

https://brainly.com/question/28647690

#SPJ11

Since NO and NO₂ have a molar ratio of 1:1, 3.66 x 10²⁵ moles of NO are needed.

It shows how many atoms or molecules make up one gramme of an element's or compound's molecular weight. The result is 6.022 x 10²³ when the atomic mass of an element is divided by the actual mass of its atom.

The balanced chemical equation indicates: 2 NO + O₂ → 2 NO₂

1 mole of O₂ and 2 moles of NO₂ combine to form 2 moles of NO₂. The molar ratio of NO to NO₂ is thus 2:1, or just 1:1. Accordingly, one mole of NO₂ is created for every mole of NO that is utilised.

Therefore, the amount of NO₂ in moles is:

7.32×10²⁵ NO₂ molecules / 2 = 3.66×10²⁵ moles of NO₂

To know more about molecules visit:-

https://brainly.com/question/19922822

#SPJ1

Answer:

The activation strength of substituents in electrophilic aromatic substitution reactions refers to their ability to increase the reactivity of an aromatic ring towards electrophilic attack. Substituents that are electron-donating or have a positive inductive effect are considered activating, while those that are electron-withdrawing or have a negative inductive effect are considered deactivating. Here is the ranking of the given substituents by increasing activation strength:

-Br

-CH2CH3

-CN

-N(CH3)2

Explanation:

-Br (bromine) is a deactivating substituent. It has a negative inductive effect, which withdraws electron density from the ring, making it less reactive towards electrophilic aromatic substitution reactions. Hence, it has the lowest activation strength among the given substituents.

-CH2CH3 (ethyl) is a weakly activating substituent. It has a slight electron-donating effect due to the +I (inductive) effect of the alkyl group, which can increase the electron density on the aromatic ring and make it more reactive towards electrophilic attack. However, the effect is relatively weak compared to other activating groups, so it has a moderate activation strength.

-CN (cyano) is a moderately activating substituent. It has both electron-donating (+I) and electron-withdrawing (-M) effects. The electron-donating effect dominates over the electron-withdrawing effect, making it an activating group overall. It can increase the electron density on the aromatic ring and enhance its reactivity towards electrophilic substitution reactions.

-N(CH3)2 (dimethylamino) is a strongly activating substituent. It has a strong electron-donating effect (+I), which can significantly increase the electron density on the aromatic ring and make it highly reactive towards electrophilic attack. Hence, it has the highest activation strength among the given substituents.

In summary, the ranking of the given substituents by increasing activation strength towards electrophilic aromatic substitution reactions is: -Br < -CH2CH3 < -CN < -N(CH3)2.

The calculated NaOH concentration will be lower than the actual concentration.

During the titration of KHP (acid) solution with NaOH (base), the goal is to determine the concentration of the NaOH solution by measuring the volume of NaOH needed to react with a known amount of KHP. If some KHP solution is spilled before the titration begins, the actual amount of KHP used in the titration will be less than what you assume it to be.

When you continue with the titration procedure and reach the endpoint, you will have used less volume of NaOH than if the KHP spill had not occurred. This leads to a lower calculated NaOH concentration because you assume that the same amount of KHP reacted with the NaOH, when in reality, it was less. Thus, the calculated NaOH concentration will be lower than the actual concentration due to the spilled KHP solution.

To know more about titration  visit:

brainly.com/question/31271061

#SPJ11

The enthalpy for a two-step reaction, given for the two steps are 225 KJ and -147 KJ, respectively is found to be 78 kJ.

To find the enthalpy of the overall reaction, we need to add the enthalpies of the two steps. If the reaction is,

A → B → C, the reactant A, intermediate is B, and the final product is C, then we can write the enthalpy change for the two steps as,

ΔH₁: A → B, enthalpy change = 225 kJ

ΔH₂: B → C, enthalpy change = -147 kJ

The overall enthalpy change for the reaction A → C is the sum of the enthalpies for the two steps, so,

ΔHtotal = ΔH₁ + ΔH₂

= 225 kJ + (-147 kJ)

= 78 kJ

Therefore, the enthalpy change for the overall reaction A → C is 78 kJ.

To know more about enthalpy of reaction, visit,

https://brainly.com/question/28772375

#SPJ4

Note that the missing part CD in the kite is 5

Given Kite ABCD

To find the lenght of CD

We know that, in a kite, the diagonals are perpendicular.

Thus,

Using Pythagoras Theorem,

CD² = 3² + 4²
CD = 9² + 16²

CD² = 25
√CD = 5 Units

The missing lenght of CD is 5

Learn more about Kite:
https://brainly.com/question/26679673
#SPJ1

Full Question:

See attached image.

The bond(s) within each substance is:

MgCl₂ - Ionic bond
2 strands of DNA - Covalent bond
NaCl - Ionic bond
H₂O - Covalent bond
CH4 - Covalent bond
H₂ - Covalent bond
2 water molecules - Hydrogen bond

Hydrogen bonds are weak chemical bonds that occur between a hydrogen atom and an electronegative atom, covalent bonds are strong chemical bonds that occur when two atoms share electrons, and ionic bonds are strong chemical bonds that occur between oppositely charged ions.

1. MgCl₂: This substance has ionic bonds, as it is formed by the transfer of electrons between a metal (Mg) and a non-metal (Cl).

2. 2 strands of DNA: The bonds within DNA strands are covalent, specifically, the backbone is connected by phosphodiester bonds and the base pairs are connected by hydrogen bonds.

3. NaCl: This substance has ionic bonds, as it is formed by the transfer of electrons between a metal (Na) and a non-metal (Cl).

4. H₂O: Water molecules have polar covalent bonds, where the electrons are shared between oxygen and hydrogen atoms but the sharing is unequal, creating a polar molecule.

5. CH₄: Methane has covalent bonds, as the electrons are shared between carbon and hydrogen atoms.

6. Н₂: H₂ (hydrogen gas) has covalent bonds between the hydrogen atoms.

7. 2 water molecules: The interaction between two water molecules is primarily through hydrogen bonds, formed due to the polarity of the water molecules.

Learn more about chemical bonds here: https://brainly.com/question/29794367

#SPJ11

0.121 mols of NO are required to generate 7.32 x 10^5 NO2 molecules.

To find the moles of NO required, we first need to determine the number of moles of NO2 based on the provided number of molecules.

Given, 7.32 x 10^5 NO2 molecules.

To convert molecules to moles, we will use Avogadro's number (6.022 x 10^23 mol⁻¹).

Moles of NO2 = (7.32 x 10^5 molecules) / (6.022 x 10^23 mol⁻¹) = 1.22 x 10^-18 moles

Now, according to the balanced chemical equation (which is not provided), we will assume a 1:1 mole ratio between NO and NO2.

Therefore, moles of NO required = 1.22 x 10^-18 moles.

So, 1.22 x 10^-18 moles of NO are required to generate 7.32 x 10^5 NO2 molecules.

Learn more about NO2 here: brainly.com/question/20291234

#SPJ11

The volume of the diluted solution is 31.2 ml.

This can be found using the dilution equation, C1V1 = C2V2. We know that the initial concentration (C1) is 12.0 M, the initial volume (V1) is 3.12 ml, and the final concentration (C2) is 1.20 M. Solving for V2, we get V2 = (C1V1)/C2 = (12.0 M x 3.12 ml)/1.20 M = 31.2 ml.

The dilution equation is commonly used in chemistry to calculate the final volume or concentration of a solution after dilution. It states that the product of the initial concentration and volume is equal to the product of the final concentration and volume.

This equation allows us to manipulate the known variables to find the unknown ones. In this case, we started with a highly concentrated stock solution of hydrochloric acid and needed to dilute it to a lower concentration.

By using the dilution equation, we were able to find the final volume of the diluted solution needed to achieve the desired concentration.

To know more about dilution equation click on below link:

https://brainly.com/question/11493179#

#SPJ11

The concentration of C₅H₅NHCl necessary to buffer a 0.44 M C₅H₅N solution at pH 5.00 is 0.24 M.


1. Calculate the pOH by subtracting pH from 14: pOH = 14 - 5.00 = 9.

2. Find the OH⁻ concentration using the pOH: [OH⁻] = [tex]10^-^p^O^H[/tex] = 10⁻⁹.

3. Calculate the concentration of the base (C₅H₅N) in its ionized form: [C₅H₅N⁻] = (Kb × [C₅H₅N]) / [OH⁻] = (1.7 × 10⁻⁹ × 0.44) / 10⁻⁹ = 0.748 M.

4. Use the Henderson-Hasselbalch equation: pH = pKa + log ([A⁻]/[HA]).

5. Rearrange to solve for [HA]: [HA] = [A⁻] / [tex]10^(^p^K^_a-pH)[/tex].

6. Calculate [HA]: [HA] = 0.748 / (10⁽⁹⁻⁵⁾)= 0.24 M.

Thus, the concentration of C₅H₅NHCl needed is 0.24 M.

To know more about Henderson-Hasselbalch equation click on below link:

https://brainly.com/question/13423434#

#SPJ11

The three different systematic (IUPAC) names for the same compound are:

1. 5-bromo-2-hydroxytoluene

2. 4-bromo-1-hydroxy-2-methylbenzene

3. 4-bromo-2-methylphenol

The IUPAC nomenclature is the set of rules for naming the organic compounds as per the International Union of Pure and Applied Chemistry.

To know more about IUPAC nomenclature, click on the below link:

https://brainly.com/question/30086566

#SPJ11

The pH of a 0.0727 m aqueous sodium cyanide, nacn, solution at 25.0 °c. kb for cn- is 4.9x10-10 is 8.78. The correct option is a.

The first step is to write the equilibrium equation for the reaction of CN- with water:

CN- + H2O ⇌ HCN + OH-

The equilibrium constant for this reaction is the base dissociation constant, Kb, which is given as 4.9x10^-10.

Kb = [HCN][OH-]/[CN-]

At equilibrium, the concentrations of HCN and OH- are equal, so we can simplify the expression to:

Kb = [OH-]^2/[CN-]

We are given the concentration of CN- as 0.0727 M. Let x be the concentration of OH- at equilibrium. Then the expression for Kb becomes:

4.9x10^-10 = x^2/0.0727

Solving for x gives:

x = 6.29x10^-6 M

The pH of the solution is given by:

pH = -log[H+]

[H+] = Kw/[OH-] = 1.0x10^-14/6.29x10^-6 = 1.59x10^-9

pH = -log(1.59x10^-9) = 8.80

Therefore, the pH of the solution is approximately 8.78, which is closest to option (a).

For more such questions on pH.

https://brainly.com/question/11300720#

#SPJ11

In the mid-nineteenth century, the Spiritualism movement emerged, promising contact with the divine through communication with ghosts and spirits.

The mid-nineteenth century saw the rise of a movement that promised believers the opportunity to connect with the divine through communication with ghosts and spirits. This spiritualism movement attracted many followers who sought comfort and guidance from beyond the physical world. Through mediums, individuals were able to contact deceased loved ones and receive messages from the divine realm. While the movement had its critics, it remained a popular form of spiritual practice for many who sought a deeper understanding of the divine.
In the mid-nineteenth century, the Spiritualism movement emerged, promising contact with the divine through communication with ghosts and spirits.

Learn more about Spiritualism here:  https://brainly.com/question/30061176

#SPJ11

The balanced molecular chemical equation for the reaction between rubidium bromide and lead(II) perchlorate in aqueous solution can be written as: [tex]2RbBr[/tex](aq) + [tex]Pb(ClO_{4})_{2}[/tex] (aq) → [tex]2RbClO_{4}[/tex] (aq) + [tex]Pb(Br)_{2}[/tex] (s)

In this reaction, rubidium bromide reacts with lead(II) perchlorate to form rubidium perchlorate and lead(II) bromide. Lead(II) bromide is insoluble in water and forms a precipitate, which is represented by (s) in the equation.

What is an aqueous solution?

An aqueous solution is a solution in which water is the solvent. This means that the substance that is dissolved in the solution (the solute) is mixed with water to form a homogeneous mixture. In an aqueous solution, water molecules surround and separate the individual ions or molecules of the solute, which are dispersed throughout the solution.

Aqueous solutions are very common in nature and in everyday life, as many substances can dissolve in water to form solutions. For example, salt can dissolve in water to form a saltwater solution, and sugar can dissolve in water to form a sweetened water solution. Many chemical reactions also occur in aqueous solutions, as water can serve as a medium for the reactants to interact with each other.

To know more about aqueous solution, visit:

https://brainly.com/question/20592881

#SPJ1

Based on the information provided, it is not possible to determine the mL of 0.20 M NaOH added.

However, the prelab calculation and measured pH values are given for various amounts of NaOH added during a titration of hydrogen phthalate (HP or HC8H404).
In-Lab Question 3a asks for the experimental pKa value for HP found at the midpoint of the KHP titration curve. The provided answer is 4.0, and the instruction is to label the pKa on each copy of the KHP titration curve.

In-Lab Question 3b asks for a comparison of the experimental pKa value to the accepted value of 5.408 for HP. Without the experimental pKa value for HP, it is not possible to determine the comparison between the two values.
Based on the provided data, the experimental pKa value for hydrogen phthalate (HP or HC8H4O4) found at the midpoint of your KHP titration curve is 4.0. When comparing this experimental value to the accepted pKa value of 5.408, it is slightly lower. This difference could be due to experimental errors, inaccuracies in measurements, or other factors during the titration process.

To learn more about hydrogen phthalate visit;

https://brainly.com/question/15236909

#SPJ11

If the Grignard reagent is found in excess, one mole of aldehyde will react with one mole of the reagent. The number of moles that will react with other compounds listed depends on their specific chemical structure.

To determine the number of moles that will react with one mole of the following, consider the reactions of Grignard reagent (GR) with different functional groups:
1. Ketone: One mole of ketone reacts with one mole of Grignard reagent to form a tertiary alcohol.
2. Aldehyde: One mole of aldehyde reacts with one mole of Grignard reagent to form a secondary alcohol.
3. Ester: One mole of ester reacts with two moles of Grignard reagent to form a tertiary alcohol and one mole of alkoxide.
4. Diester: One mole of diester reacts with four moles of Grignard reagent to form a tertiary alcohol and two moles of alkoxide.
5. Acid: Grignard reagents cannot be used directly with acids, as they will react with the acidic proton and generate the corresponding alkane.
So, the number of moles reacting with one mole of each are:
- Ketone: 1 mole of GR
- Aldehyde: 1 mole of GR
- Ester: 2 moles of GR
- Diester: 4 moles of GR
- Acid: Cannot react directly with GR

To learn more about Grignard reagent click here https://brainly.com/question/30144052

#SPJ11

Equation chemically balanced for Aquarius solutions. When cations and anions in an aqueous solution react to generate a precipitate, an insoluble ionic solid, precipitation processes take place.

A solution of a salt that is only sparingly soluble adjusts the solubility equilibrium in the desired direction when a common cation or common anion is added. When soluble ionic chemical solutions are combined, the solubility table in Table 1 can be used to forecast if a precipitation process will take place. A single solution is created by combining multiple solutions; the finished product contains 0.2 mol Pb1CH3COO), 0.1 mol Na2S, and 0.1 mol CaCl2.

To know more about Aquarius, click here:

https://brainly.com/question/555394

#SPJ4

In MacConkey agar, crystal violet and bile salts play crucial roles in inhibiting the growth of Gram-positive bacteria, allowing for the selective growth of Gram-negative bacteria.

Crystal violet is a dye that penetrates the thick cell walls of Gram-positive bacteria, while bile salts disrupt their cell membrane, preventing their growth.
Neutral red and lactose have distinct functions in MacConkey agar. Neutral red serves as a pH indicator, turning red in response to the acidic environment produced by lactose-fermenting bacteria. Lactose, on the other hand, is a carbohydrate that allows for the differentiation of lactose-fermenting and non-lactose-fermenting Gram-negative bacteria. Lactose-fermenting bacteria produce acidic byproducts, which cause the neutral red to change color, resulting in the formation of red or pink colonies.

Learn more about  crystal violet at https://brainly.com/question/14775957

#SPJ11

The pH of the buffer solution is approximately 4.83.

To find the pH of this buffer solution, we need to use the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

where pKa is the dissociation constant of the weak acid, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the weak acid.

First, we need to calculate the pKa of the weak acid:

pKa = -log(3.7×10−5) = 4.43

Next, we can plug in the values given for the concentrations of the weak acid and conjugate base:

pH = 4.43 + log(0.400/0.160)

pH = 4.43 + log(2.5)

pH = 4.43 + 0.397

pH = 4.83

Learn More about pH here :-

https://brainly.com/question/30656928

#SPJ11

b. HNO2(aq) + NH3(aq) --> NH4NO2(aq) is the neutralization reactions has a pH > 7 when equal molar amounts of acid and base are mixed.

Explanation: In a neutralization reaction, an acid reacts with a base to produce a salt and water. When equal molar amounts of acid and base are mixed, the resulting pH depends on the acidity and basicity of the products.
a. CH3CO2H(aq) + NaOH(aq) --> H2O(l) + NaCH3CO2(aq)
Acetic acid (CH3CO2H) is a weak acid and sodium hydroxide (NaOH) is a strong base. The reaction produces water and sodium acetate (NaCH3CO2), a salt of a weak acid and a strong base. The pH of this reaction would be greater than 7.
b. HNO2(aq) + NH3(aq) --> NH4NO2(aq)
Nitrous acid (HNO2) is a weak acid and ammonia (NH3) is a weak base. The reaction produces ammonium nitrite (NH4NO2), a salt of a weak acid and a weak base. The pH of this reaction would be close to 7 but slightly greater than 7 due to the higher basicity of ammonia.
c. HCl(aq) + NaOH(aq) --> H2O(l) + NaCl(aq)
Hydrochloric acid (HCl) is a strong acid and sodium hydroxide (NaOH) is a strong base. The reaction produces water and sodium chloride (NaCl), a salt of a strong acid and a strong base. The pH of this reaction would be exactly 7.
Based on the given choices, option b has a pH slightly greater than 7 when equal molar amounts of acid and base are mixed.

learn more about neutralization here

https://brainly.com/question/28970253

#SPJ11

The presence of multiple equilibria can result in the formation of different species of silver ions in solution due to the formation of different complexes with ligands.

The presence of multiple equilibria can result in the formation of different species in a chemical reaction. In the case of silver ion (Ag⁺) in solution, it can form various complexes with ligands (such as ammonia, chloride ions, etc.) that have different equilibrium constants. This can lead to the formation of multiple equilibria and different species of silver ions in solution.

One possible observation in this case could be the formation of a precipitate of AgCl when silver nitrate (AgNO₃) is added to a solution containing chloride ions (Cl⁻). The net ionic equation for this reaction is:

Ag⁺ (aq) + Cl⁻ (aq) → AgCl (s)

In this reaction, Ag⁺ and Cl⁻ ions are in equilibrium with each other, and the reaction proceeds to form AgCl precipitate due to the insolubility of AgCl.

Equation 16.6 refers to the formation constant of a complex ion with a ligand. For example, the formation constant of the Ag(NH3)₂⁺ complex ion can be given by:

Ag⁺ + 2 NH₃ ⇌ Ag(NH3)₂⁺

The equilibrium constant for this reaction can be represented by Kf. Therefore, the presence of different ligands and their respective formation constants can result in the formation of multiple species of silver ions in solution, leading to multiple equilibria.

To know more about equilibria, here

brainly.com/question/29313546

#SPJ4

When dissolving KHP, using 20 ml of distilled water instead of 50 ml has the following effect: The molarity of the NaOH that you calculate will be too low. The correct answer is option d.

The molarity of a solution is a measure of the concentration of that solution, defined as the number of moles of solute dissolved in one liter of solution. It is expressed in units of moles per liter (mol/L), or sometimes as "M".

When you use less water to dissolve the KHP, the solution becomes more concentrated. During the titration process, the more concentrated KHP solution will require less volume of NaOH to reach the endpoint. As a result, when calculating the molarity of the NaOH, you would get a value that is lower than the actual molarity.

Therefore option d is the correct answer.

Learn more about endpoint  here:

https://brainly.com/question/15892951

#SPJ11

a) C5H8 + 7O2 --> 5CO2 + 4H2O
b) CH3CH=CHCH3 + Br2 --> CH3CHBrCHBrCH3
c) 6HNO3 + C6H6 --> 6NO2 + 2H2O + C6H3(NO2)3
d) C6H5CH2CH3 + H2SO4 --> C6H5CH2CH2HSO4 + H2O

With the molecular formula C6H6, benzene is an aromatic hydrocarbon that is colorless, extremely flammable, and volatile. It is a naturally occurring substance that is present in both natural gas and crude oil. Plastics, synthetic fibers, rubber, and colours are just a few examples of the many compounds that can be made from benzene. Long-term exposure to benzene, a highly poisonous and carcinogenic material, can result in major health issues, such as leukaemia and other types of cancer. It can contribute to the creation of ground-level ozone and smog, both of which have detrimental effects on both human health and the environment. It is also a volatile organic compound (VOC).

Learn more about benzene here:

https://brainly.com/question/24835328

#SPJ11

The volume of oxygen, O₂ required to react with 7.6 L of PCI₃ measured at the same temperature and pressure is 3.8 liters

The volume of oxygen, O₂ required to react with 7.6 liters of PCI₃ at the same temperature and pressure can be obtain as illustrated below:

Balanced equation for the reaction:

2PCI₃(g) + O₂(g) → 2POCI₃(g)

Since the reaction took at constant temperature and pressure, thus we have that:

From the balanced equation above,

2 liters of PCI₃ reacted with 1 liters of oxygen, O₂

Therefore,

7.6 liters of PCI₃ will react = (7.6 liters × 1 liter) / 2 liters = 3.8 liters of oxygen, O₂

Thus, from the above calculation, it is evident that the volume of volume of oxygen, O₂ required for the reaction is 3.8 liters

Learn more about volume:

https://brainly.com/question/9614052

#SPJ1

Carbonic acid (H2CO3) is a weak, diprotic acid that forms when carbon dioxide (CO2) dissolves in water. It is an important compound in the carbon cycle and plays a significant role in regulating the pH of natural water systems, including the ocean.

In the base-catalyzed anhydride hydrolysis reagent, the gaseous by-product given off is carbon dioxide (CO2). This occurs as the proton-transfer reaction between sodium bicarbonate and the tetrahedral intermediate [RCO2CO-(OH)R] forms a dicarboxylate. Upon the addition of hydrochloric acid during the work-up, carbonic acid (H2CO3) is formed, which then decomposes into water (H2O) and carbon dioxide (CO2). Carbonic acid has a pKa of 6.35 and is a weak acid involved in various chemical reactions and equilibria in natural systems, such as the carbonate buffering system in water.

To know more about Carbonic acid please refer: https://brainly.com/question/13929437

#SPJ11

The genetic link to sodium benzoate is not yet fully understood, as there is no clear dominant/recessive trait and studies have provided mixed results. Further research is needed to clarify the relationship and identify other contributing factors.

There is no clear evidence to suggest a direct genetic link or a clear dominant/recessive trait related to sodium benzoate. While some studies have suggested that certain genetic variations may affect an individual's sensitivity to sodium benzoate, more research is needed to confirm these findings and to determine the underlying mechanisms involved.

Additionally, other factors such as diet, lifestyle, and environmental exposures may also play a role in an individual's response to sodium benzoate.

Learn more about Dominant trait

brainly.com/question/20744588

#SPJ11

The reaction will be spontaneous at all temperatures lower than 207 K if H° = +62.4 kJ and S° = +301 J/K. Thus, option (a) is the proper one.

To calculate the standard free energy change, standard enthalpy change, standard entropy change, and standard temperature change, we can apply the equation G° = H° - TS°. T stands for Kelvin.

G° = (+62.4 kJ) - (207 K)(+301 J/K) = -10.9 kJ/mol is the result of substituting the supplied numbers.

The reaction occurs spontaneously at all temperatures lower than 207 K because G° is negative.

A spontaneous reaction is one that favors the creation of products in the environment in which it is taking place.

To learn more about spontaneous reaction visit:

brainly.com/question/13790391

#SPJ1

There are roughly 684.6 grams in a sample of 1000 ml of C12H22O11 in a 2.0 M solution.

We need to use the formula:

mass = moles × molar mass

where

C12H22O11 (sucrose) has a molar mass of about 342.3 g/mol.

The volume must first be changed from milliliters to liters:

1000 ml = 1000/1000 L = 1 L

Next, we can determine how many moles of C12H22O11 are present in the solution:

moles = 2.0 M × 1 L = 2.0 moles

Finally, we can figure out how much C12H22O11 is present in the solution:

mass = moles × molar mass = 2.0 moles × 342.3 g/mol ≈ 684.6 grams

Therefore, there are roughly 684.6 grams in a sample of 1000 ml of C12H22O11 in a 2.0 M solution.

Learn more about molar mass here : brainly.com/question/21334167

#SPJ1

There are roughly 684.6 grams in a sample of 1000 ml of C12H22O11 in a 2.0 M solution.

We need to use the formula:

mass = moles × molar mass

where

C12H22O11 (sucrose) has a molar mass of about 342.3 g/mol.

The volume must first be changed from milliliters to liters:

1000 ml = 1000/1000 L = 1 L

Next, we can determine how many moles of C12H22O11 are present in the solution:

moles = 2.0 M × 1 L = 2.0 moles

Finally, we can figure out how much C12H22O11 is present in the solution:

mass = moles × molar mass = 2.0 moles × 342.3 g/mol ≈ 684.6 grams

Therefore, there are roughly 684.6 grams in a sample of 1000 ml of C12H22O11 in a 2.0 M solution.

Learn more about molar mass here : brainly.com/question/21334167

#SPJ1