Demarcus launches a small weight into the air. The weight takes 6.4 seconds to reach the ground again. At what time did the weight have a vertical velocity of 0 meters per second?
On a beautiful spring day, Juan is playing a round of golf. He hits the golf ball with an initial velocity of 44.9 m/s at an angle of 28 degrees. If it hits the ground 6s later, how far does it travel? Answer: ____m
Answer:
140m 13 degree
Explanation:
yan po thank nalang po sa point
How to do this question plz answer
Explanation:
(i)An analog signal has some feature that is a continuous function of the program material being transmitted. It may take on any of a range of values.
In radio, amplitude, frequency, or phase are features of the radio signal commonly modulated when transmitting an analog signal.
__
(ii)A digital signal has some feature that is a discrete function of the program material being transmitted. It may take on any of a specific set of values.
A digital radio signal typically uses some combination of amplitude, frequency, and phase to represent a discrete state being transmitted. Only specific values of these are used by the transmitter.
(The receiver generally has to deal with corruption of the signal by the transmission channel, so the received set of values may not correlate well with those intended at the transmitter. This is why error-correcting codes are often used with digital signal transmission.)
_____
Additional comment
Analog radio signals are generally transmitted using a carrier wave at a specific frequency (or in some specific frequency range, in the case of frequency modulation). Processing techniques may be used at the transmitter to limit the bandwidth used in the transmission. One commonly-used technique is to limit the transmitted spectrum to one side of the carrier wave frequency. (This is called "single side-band" radio.)
Digital signals offer the opportunity to transmit different bits of the information at different frequencies. Sometimes, "frequency hopping" is used, so that the transmitted carrier wave jumps around from one frequency to another in a predetermined pattern. The effect of this is to spread out the spectrum of the transmitted signal so that average power in any frequency band is significantly reduced. In fact, it may be indistinguishable from background noise, except by a receiver that tunes to the carrier wave in the predetermined frequency pattern.
what is concentration?
Answer:
The concentration of a chemical substance expresses the amount of a substance present in a mixture.
Another definition is that concentration is the ratio of solute in a solution to either solvent or total solution. Concentration is usually expressed in terms of mass per unit volume.
Answer:
In chemistry, concentration is the abundance of a constituent divided by the total volume of a mixture. Several types of mathematical description can be distinguished: mass concentration, molar concentration, number concentration, and volume concentration.
Why are earthquakes and volcanic eruptions common in a convergent plate boundary?
Answer:
Much magma is generated at a converging plate boundary where subduction is occurring.
People who are exceptionally tall (like seven feet and over) often have a disorder that causes them to keep growing past the age most people do in their late teens. What gland would this disorder be associated with?
A.
adrenal
B.
thyroid
C.
pituitary
D.
pancreas
Answer:
C is the answer
Explanation:
The pituitary gland also known as the Master gland controls and regulates secretion of most hormones, when taller people usually grow past expected height this is normally due to the Pituitary gland not properly regulating and it secretes too many growth hormones causing "gigantism."
which layer of the atmosphere has no definite outer limit?
To solve this, we must be knowing each and everything related to atmosphere. Therefore, thermosphere is the layer of the atmosphere has no definite outer limit.
What is atmosphere?
The atmosphere is more than simply the beautiful sky above. The atmosphere is made up of numerous levels of gases that surround the planet.
The word "atmo," which meaning vapor, smoke, or fog in Greek, is the source of the atmosphere's name. "Sphere" comes from the Greek word sphaira, which meaning ball. The term "atmosphere" refers to a vapor ball. Thermosphere is the layer of the atmosphere has no definite outer limit. The thermosphere is located between 53 miles (85 kilometers) and 375 mile (600 kilometers).
Therefore, thermosphere is the layer of the atmosphere has no definite outer limit.
To know more about atmosphere, here:
https://brainly.com/question/11487214
#SPJ5
The exosphere is the layer of the atmosphere that has no clear outer limit. The exosphere is the Earth's atmosphere's outermost layer, extending from the top of the thermosphere to the edge of space.
The exosphere, unlike the other layers of the atmosphere, gradually transitions into the vacuum of outer space with no clearly defined border.
The density and spread out of gas molecules in the exosphere are exceedingly low.
This area is made up mostly of relatively light gases like hydrogen and helium, and it is where satellites and other spacecraft circle the Earth.
Thus, the progressive reduction in density as the atmosphere merges into space accounts for the lack of a well-defined outer boundary.
For more details regarding atmosphere, visit:
https://brainly.com/question/32358340
#SPJ6
What force is represented by the vector?
O friction
O gravity
O normal force
O push
Someone pls help
Answer:
gravity
Explanation:
because it acts on a particular direction that is towards the ground
brainliest plz
A piece of wood has a mass of 8g and a volume of 10cm³ work out the density of the wood
Answer:
0.8 g/cm³Explanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\[/tex]
From the question
mass = 8 g
volume = 10 cm³
We have
[tex]density = \frac{8}{10} = \frac{4}{5} = 0.8 \\ [/tex]
We have the final answer as
0.8 g/cm³Hope this helps you
Which force is making a difference in the weight of each person?
A
applied
B
gravitational
C
normal
D
tension
The force is different because of the amount of weight applied so the answer is A
The force that makes a difference in the weight of each person is Gravitational. Correct option is B.
Gravitational force is a fundamental force of nature that exists between any two objects with mass. It's the force that keeps us and everything else on Earth anchored to its surface. This force is proportional to the mass of the objects involved and inversely proportional to the square of the distance between them.
For example, if you were standing on a bathroom scale, the reading on the scale represents the force of the Earth's gravity acting on your body, which is why it's often referred to as your "weight." The actual mass of an object remains constant regardless of its location, but its weight can vary depending on the strength of the gravitational field at different locations (e.g., the weight on the Moon would be less than on Earth due to the Moon's weaker gravitational pull).
To know more about Gravitational:
https://brainly.com/question/3009841
#SPJ3
You need to exercise your body in the same what that you are going to use it.
Answer:
mjm
Explanation:
What happens to most bones when we break theAlways include the steps and/or background required to get to the final answer. Let’s help other people understand and solve future problems on their own.
it is safe to smoke smarties
Answer:
no it is not safe to smoke
Answer:
well its not affecting you lungs or anything. the only way it will affect you is if you eat to much smarties or you choke on it. so yeah it is safe to smoke smarties
Explanation:
__________ invented the analytical engine, a machine that did calculations.
Answer:
Charles Babbage
Explanation:
Analytical Engine, generally considered the first computer, designed and partly built by the English inventor Charles Babbage in the 19th century (he worked on it until his death in 1871).
if you hold a heavy weight over your head, the work you do __________.
Answer:
Is zero.
Explanation:
I legit just had this question on my homework.
An object is travelling at a velocity of 5m/s to the right for 5 seconds. If NO forces are applied to the object, what will the velocity of the object be after 5 seconds.
Answer:
Below
Explanation:
We can use this formula to find the final velocity of the object :
vf = vi + at
Now, because no force is applied to the object, the acceleration of this object will be 0 according to Newton's 1st law!
vf = 5m/s + (0)(5)
vf = 5 m/s
Hope this helps!
Can someone help me pls
Sorry if the photo is rubbish
Answer:
F
Explanation:
F is not a molecule, a molecule contains two or more cells. But F stands for fluorine, which I think is a singular cell.
A person holds a bucket of weight 60N and climbs vertically the distance of 5m. What is the work done by gravity?
Answer:
300 J (Joules)
A Joule will measure "the amount of work done when a force of one newton is exerted through a distance of one meter"
Hope this Helps
I don't understand this QUESTION
This electric force calculator will enable you to determine the repulsive or attractive force between two static charged particles. Continue reading to get a better understanding of Coulomb's law, the conditions of its validity, and the physical interpretation of the obtained result.
How to use Coulomb's law
Coulomb's law, otherwise known as Coulomb's inverse-square law, describes the electrostatic force acting between two charges. The force acts along the shortest line that joins the charges. It is repulsive if both charges have the same sign and attractive if they have opposite signs.
Coulomb's law is formulated as follows:
F = keq₁q₂/r²
where:
F is the electrostatic force between charges (in Newtons),
q₁ is the magnitude of the first charge (in Coulombs),
q₂ is the magnitude of the second charge (in Coulombs),
r is the shortest distance between the charges (in m),
ke is the Coulomb's constant. It is equal to 8.98755 × 10⁹ N·m²/C². This value is already embedded in the calculator - you don't have to remember it :)
Simply input any three values
explain how siphon works with atmospheric pressure?
Answer:
A siphon is a tube that allows liquid to travel upward, above the surface of the origin reservoir, then downwards to a lower level without using a pump. When a certain amount of water moves over the bend in the siphon, gravity pulls it down on the longer leg lowers the atmospheric pressure in the bend of the siphon.
Mark me as brainlest, please?
Explanation:
NEED HELP!!!! 15 POINTS!!!!!!!
Why is it important to have both long-term and short-term goals?
A.
Short-term goals can get repetitive, so long-term goals help maintain motivation.
B.
Short-term goals are more achievable while long-term goals are more unrealistic.
C.
Long-term goals take planning and are easier to accomplish than short-term goals.
D.
Long-term goals are often inspirational, so they are easier to meet than short term goals.
PLEASE NO LINKS
What is the voltage between two short-circuited points? PLZ HELP ASAP
Answer
It states that V/I = R where V is potential difference R is resistance and I is the current flowing across the terminals.Now when short circuit the resistance ...
Explanation:
If you decrease how much you push or pull on an object what happens to the acceleration experienced by that object?
Answer:
copy and paste
Explanation: As the power following up on an object increases, the speed of acceleration is increased. As the mass of the article is expanded, the speed increase of the item is diminished.
What experiment determines the upper fixed point of a liquid in a glass thermometer
Explanation:
A flask is half filled with water and heated until the water starts boiling.A thermometer is clamped inside the flask without letting it be in contact with waterThe thermometer is left in the steam such that the bulb is heated by the steam at standard atmospheric pressure.As the bulb is heated, the mercury thread rises up and ehre it remains steady for sometime is marked with a light scratch as the upper fixed point(Add diagram )
Q1. A 130 N horizontal force keeps a 30 kg chair moving at a constant velocity. Find the
coefficient of kinetic friction between the chair and the floor.
The coefficient of kinetic friction between the chair and the floor is 0.442.
The given parameters;
horizontal force on the chair, F = 130 Nmass of the chair, m = 30 kgThe normal force on the chair is calculated as follows;
Fₙ = mg
Fₙ = 30 x 9.8 = 294 N
The frictional force between the chair and the floor is calculated as follows;
Fk = μFₙ
The net force on the chair is calculated as follows;
[tex]\Sigma F_x = 0\\\\F- \mu_k F_n = 0\\\\130 - \mu_k (294) = 0\\\\\mu_k = \frac{130}{294} \\\\\mu_k = 0.442[/tex]
Thus, the coefficient of kinetic friction between the chair and the floor is 0.442.
Learn more here:https://brainly.com/question/20241845
a proton, moving east, enters a magnetic field of a certain strength. because of this field the proton curves downward. what is the direction of the magnetic field?
Answer:
F = q V X B
Using the right hand rule (right hand screw) turn V into B to get direction of force which in this case is down
If V is east and F is down then one can see that B must be directed towards the south - turn V into B (south) and F will be directed downwards.
As shown above an adhesive has been applied to contacting faces of two blocks so that the blocks interact with an adhesive force that has a magnitude, Fadhesion A tension, T, is exerted by a wire attached to the upper blocks causing the blocks to remain at rest The two blocks have weights, Wbottom and Wtop. Which of the following must be true? (1 point) ♡ O Wtop=T OT = Wtop - Fadhesion O Wbottom Fadhesion O T = Wbottom + Wtop + Fadhesion
The magnitude of the adhesive force allows the top block to remain
attached to the bottom when the blocks and the wire are balanced.
The option that must be true is; [tex]\mathbf{W_{bottom} = F_{adhesion}}[/tex]
Reason:
The tension exerted by the wire attached to the top block = T
Magnitude of the adhesive = [tex]F_{adhesion}[/tex]
Weight of the top block = [tex]W_{top}[/tex]
Weight of the bottom block = [tex]W_{bottom}[/tex]
Given that with the exertion of the tension, the two blocks remain at rest, we have;
T = [tex]W_{top}[/tex] + [tex]W_{bottom}[/tex]The adhesive causes the bottom block to remain attached to the top block, we have;
Therefore, the magnitude of the adhesive force adds the bottom weight, to the top, weight, which gives;
The magnitude of the adhesive force = The weight of the bottom block
Therefore;
[tex]W_{bottom}[/tex] = [tex]F_{adhesion}[/tex]Learn more here:
https://brainly.com/question/18907970
Answer:
Wbottom=Fadhersion it was right on y test
Explanation:
To improve your flexibility you can do which of the following
Answer:
Stretching
Explanation:
Stretching is a great way to improve your flexibility!
A 1,336 kg car drives around a flat 199-m-diameter circular track at 22 m/s. What is the
magnitude of the net force on the car?
Hi there!
This is an example of Uniform Circular Motion, thus:
Net Force = Centripetal force
∑F = mv²/r
Plug in the given values. Remember to convert from diameter to radius, first.
d = 199m
r = d/2 = 199/2 = 99.5 m
∑F = 1336(22²)/99.5 = 6498.73 N
An object is placed at 0 on a number line. It moves 3 units to the right, then 4 units to the left, and then 6 units to the
right. What is the displacement of the object?
O1
O 5
O 7
O 13
what are the magnifications of the objective lenses
Answer:
Objective Lenses: Usually you find 3 or 4 objective lenses on a microscope. They almost always consist of 4x, 10x, 40x and 100x powers, when coupled with a 10x (most common) eyepiece lens, total magnification is 40x (4x times 10x) 100x, 400x and 1000x
Explanation:
Objective lenses come in various magnification powers, with the most common being 4x, 10x, 40x, and 100x, also known as scanning, low power, high power and typically oil immersion objectives, respectively