The mass of hydrogen gas is 0.278g
We can use stoichiometry to determine the mass of hydrogen gas produced from the given amounts of aluminum and sodium hydroxide:
Balanced chemical equation for the reaction:
2 Al(s) + 2 NaOH(aq) + 6 H2O(l) → 2 NaAl(OH)4(aq) + 3 H2(g)
Number of moles of aluminum and sodium hydroxide:
n(Al) = m(Al) / M(Al) = 2.48 g / 26.98 g/mol = 0.092 mol
n(NaOH) = m(NaOH) / M(NaOH) = 4.75 g / 40.00 g/mol = 0.119 mol
The limiting reactant is aluminum.
The number of moles of hydrogen gas produced:
n(H2) = 3/2 * n(Al) = 3/2 * 0.092 mol = 0.138 mol
The mass of hydrogen gas produced:
m(H2) = n(H2) * M(H2) = 0.138 mol * 2.016 g/mol = 0.278 g
Therefore, the mass of hydrogen gas produced from the given amounts of aluminum and sodium hydroxide is 0.278 g.
learn more about stoichiometry,
https://brainly.com/question/14935523
#SPJ11
a sample of carbon monoxide initially at 11.0 °c was heated to 22.0 °c. if the volume of the carbon monoxide sample is 865.3 ml at 22.0 °c , what was its volume, , at 11.0 °c?
The initial volume of the carbon monoxide sample at 11.0 °C was approximately 840.1 mL.
What is Charles Law?Charles' Law, is a gas law that describes the relationship between the volume and temperature of a gas, assuming constant pressure and amount of gas. It states that the volume of a gas is directly proportional to its absolute temperature when the pressure and amount of gas are kept constant.
To solve this, we can use Charles's Law:
V1 / T1 = V2 / T2
where V1 is the initial volume at 11.0 °C, T1 is the initial temperature in Kelvin, V2 is the final volume (865.3 mL) at 22.0 °C, and T2 is the final temperature in Kelvin. First, we need to convert the Celsius temperatures to Kelvin:
T1 = 11.0 + 273.15 = 284.15 K
T2 = 22.0 + 273.15 = 295.15 K
Now we can plug the values into the formula:
V1 / 284.15 = 865.3 / 295.15
To find V1, we'll multiply both sides by 284.15:
V1 = 865.3 * 284.15 / 295.15
V1 ≈ 840.1 mL
To know more about Volume:
https://brainly.com/question/10444225
#SPJ11
From the following list of elements, select those that are likely to form a cation. Choose one or more: A. potassium B. bromine C. selenium D. sulfur E. strontium F. zinc G. krypton H. lithium I. copper Part 2) From the following list of elements, check those will always form ionic compounds in a 3:1 ratio with nitrogen. Choose one or more: A. krypton B. potassium C. bromine D. selenium E. copper F. lithium G. zinc H. strontium I. sulfur
From the given list of elements, those that are likely to form cations are A. potassium, E. strontium, H. lithium, and I. copper.
Cations are positively charged ions that are formed when an atom loses one or more electrons. Elements that have low electronegativity and low ionization energy are more likely to form cations. Potassium, strontium, and lithium all have one valence electron, which makes it easier for them to lose that electron and form a positive ion. Copper can also form a cation, but it has to lose two electrons to do so.
From the list of elements, those that will always form ionic compounds in a 3:1 ratio with nitrogen are B. potassium, C. bromine, E. copper, and G. zinc. Ionic compounds are formed between a metal and a non-metal, where the metal donates electrons to the non-metal to form a complete outer shell. In a 3:1 ratio with nitrogen, the metal will donate three electrons to nitrogen, which requires an element with three valence electrons.
Potassium, bromine, copper, and zinc all have three valence electrons and can therefore form ionic compounds with nitrogen in a 3:1 ratio. The other elements in the list do not have three valence electrons and cannot form ionic compounds with nitrogen in a 3:1 ratio.
For more about potassium:
https://brainly.com/question/8507057
#SPJ11
Indicate whether each statement is true or false. Drag the appropriate items to their respective bins. Reset Help We balance chemical equations as we do because energy must be conserved. You can balance the "water-splitting" reaction H2O(l) + H2(g) + O2(g) by writing in this way: H,02(1) + H2(g) + O2(g) If the reaction 203(g) + 302(g) goes to completion and all O3 is converted to O2, then the mass of O3 at the beginning of the reaction must be the same as the mass of O2 at the end of the reaction. True False
1. True: We balance chemical equations to ensure the conservation of mass and energy, as matter cannot be created or destroyed in a chemical reaction.
2. False: The water-splitting reaction should be balanced as 2H2O(l) → 2H2(g) + O2(g), which shows the correct stoichiometry for the conversion of water into hydrogen and oxygen gases.
3. True: In the reaction 2O3(g) → 3O2(g), the mass of O3 at the beginning of the reaction will be the same as the mass of O2 at the end of the reaction, as the conservation of mass principle holds true.
Learn more about stoichiometry here:
https://brainly.com/question/29775083
#SPJ11
arrange the pressure measurements from the highest pressure to the lowest pressure. 1. 0.27 bar
2. 0.35 bar
3. 11.4 kPa
4. 15.4 kPa
From greatest to lowest, the pressure readings are: 15.4 kilopascal, 11.4 kilopascal, 0.35 bar, and 0.27 bar. Keep in mind that 0.01 bar is equal to 1 kilopascal.
A high pressure measurement is what?Blood pressure is regarded as excessive when readings are consistently between 120 and 129 systolic and less than 80 mm Hg diastolic. Those with elevated blood pressure are more likely to develop high blood pressure if no steps are done to regulate the condition.
What is high pressure, exactly?Winds in an anticyclone (high pressure) typically blow slowly and anticlockwise. (in the northern hemisphere). Additionally, when the air descends, less cloud formation occurs, resulting in mild breezes and calm weather.
To know more about pressure visit:-
https://brainly.com/question/14760196
#SPJ1
Given the reaction, 4B + 3A → 4C + 7D, and some standard enthalpies of formation, ∆H o f : A: +15.7 kJ mol-1 B: −86.4 kJ mol-1 C: −52.7 kJ mol-1 D: −71.6 kJ mol-1 What is the standard enthalpy of reaction, in kJ for the reaction shown?
The standard enthalpy of reaction for the given reaction is -413.5 kJ.
To calculate the standard enthalpy of reaction (∆H°rxn) using the standard enthalpies of formation (∆H°f) for each component, you can use the following formula:
∆H°rxn = [sum of (coefficients × ∆H°f(products))] - [sum of (coefficients × ∆H°f(reactants))]
Here's a step-by-step explanation for the given reaction, 4B + 3A → 4C + 7D:
Step 1: Identify the coefficients and the standard enthalpies of formation for each component.
- A: coefficient = 3, ∆H°f = +15.7 kJ mol⁻¹
- B: coefficient = 4, ∆H°f = -86.4 kJ mol⁻¹
- C: coefficient = 4, ∆H°f = -52.7 kJ mol⁻¹
- D: coefficient = 7, ∆H°f = -71.6 kJ mol⁻¹
Step 2: Calculate the sum of the coefficients multiplied by the standard enthalpies of formation for the products.
(4 × -52.7 kJ mol⁻¹) + (7 × -71.6 kJ mol⁻¹) = -210.8 kJ + -501.2 kJ = -712.0 kJ
Step 3: Calculate the sum of the coefficients multiplied by the standard enthalpies of formation for the reactants.
(4 × -86.4 kJ mol⁻¹) + (3 × +15.7 kJ mol⁻¹) = -345.6 kJ + 47.1 kJ = -298.5 kJ
Step 4: Subtract the sum of the reactants from the sum of the products to find the standard enthalpy of reaction.
∆H°rxn = -712.0 kJ - (-298.5 kJ) = -413.5 kJ
learn more about standard enthalpy Refer: https://brainly.com/question/29556033
#SPJ11
determine the ph at the equivalence (stoichiometric) point in the titration of 47.25 ml of 0.123 m hf(aq) with 0.136 m naoh(aq). the ka of hf is 7.4 x 10-4.
The pH at the equivalence point in the titration of 47.25 mL of 0.123 M HF(aq) with 0.136 M NaOH(aq) is 3.13.
To determine the pH at the equivalence point in the titration of 47.25 mL of 0.123 M HF(aq) with 0.136 M NaOH(aq), we first need to calculate the moles of HF and NaOH present in the solution.
[tex]moles of HF = (0.123 M) x (0.04725 L) = 0.00581 mol[/tex]
[tex]moles of NaOH = (0.136 M) x (VNaOH)[/tex]
where VNaOH is the volume of NaOH required to reach the equivalence point.
At the equivalence point, the moles of NaOH will equal the moles of HF:
moles of NaOH = 0.00581 mol
Therefore, we can calculate VNaOH:
[tex]VNaOH = moles of NaOH / (0.136 M) = 0.0428 L or 42.8 mL[/tex]
At the equivalence point, all of the HF will have reacted with NaOH to form NaF and water. NaF is a salt that is completely dissociated in water, so the solution will contain only Na+ and F- ions.
The pH at the equivalence point can be calculated using the dissociation constant of HF (Ka) and the concentrations of the HF and F- ions:
Ka = [H+][F-]/[HF]
At the equivalence point, the concentration of HF is zero, so we can simplify the equation:
Ka = [H+][F-]/0
Therefore, [H+] = 0 and the pH at the equivalence point is equal to the pKa of HF:
[tex]pH = -log(Ka) = -log(7.4 x 10^-4) = 3.13[/tex]
So the pH at the equivalence point is 3.13.
To know more about equivalence point click here:
https://brainly.com/question/31375551
#SPJ11
part a part complete δs is negative for the reaction ________. kbr(aq)→k (aq) br−(aq) 2nh3(g)→n2(g) 3h2(g) ch3oh(l)→ch3oh(g) mg(no3)2(aq) 2naoh(aq)→mg(oh)2(s) 2nano3(aq) c6h12o6(s)→6c(s) 6h2(g) 3o2(g)
In this reaction, the number of gaseous molecules decreases from 2 moles of NH3 to 1 mole of N2 and 3 moles of H2. The decrease in the number of gaseous molecules results in a decrease in entropy, making ΔS negative for this reaction.
The term "negative" in the context of a reaction refers to a negative change in entropy (ΔS). A negative ΔS implies that the reaction results in a decrease in disorder, typically seen when the number of gaseous molecules decreases or a solid is formed.
The reaction with a negative ΔS is: 2NH3(g) → N2(g) + 3H2(g)
Learn more about reaction here, https://brainly.com/question/11231920
#SPJ11
Calculate the ratio of the (M + 2)+ to M+ and the (M + 4)+ to M+ peak heights for
(a) C10H6Br2,
(b) C3H7ClBr, (c) C6H4Cl2.
The [tex](M+2)^{+}[/tex] peak corresponds to the presence of a carbon-13 isotope, which is 1 atomic mass unit heavier than the carbon-12 isotope that is most abundant.
The [tex](M+2)^{+}[/tex] peak corresponds to the presence of two carbon-13 isotopes or one carbon-13 isotope and a chlorine-35 isotope, which are both 2 atomic mass units heavier than the most abundant isotopes.
(a) [tex]C_{10} H_{6} Br_{2}[/tex]:
The molecular weight of [tex]C_{10} H_{6} Br_{2}[/tex] is:
M = (10 x 12.011) + (6 x 1.008) + (2 x 79.904) = 323.05 g/mol
The [tex](M+2)^{+}[/tex] peak corresponds to the presence of one carbon-13 isotope in the molecule, so the ratio of the [tex](M+2)^{+}[/tex] to [tex]M^{+}[/tex] peak heights is approximately 1:100. The [tex](M+2)^{+}[/tex] peak corresponds to the presence of two carbon-13 isotopes or one carbon-13 isotope and a chlorine-35 isotope, so the ratio of the [tex](M+2)^{+}[/tex] to [tex]M^{+}[/tex] peak heights is approximately 1:10,000.
(b) [tex]C_{3} H_{7} ClB[/tex]r:
The molecular weight of [tex]C_{3} H_{7} ClB[/tex] is:
M = (3 x 12.011) + (7 x 1.008) + 35.453 + 79.904 = 168.46 g/mol
The [tex](M+2)^{+}[/tex] peak corresponds to the presence of one carbon-13 isotope in the molecule, so the ratio of the [tex](M+2)^{+}[/tex] to [tex]M^{+}[/tex] peak heights is approximately 1:20. The [tex](M+2)^{+}[/tex] peak corresponds to the presence of two carbon-13 isotopes or one carbon-13 isotope and a chlorine-35 isotope, so the ratio of the [tex](M+2)^{+}[/tex] to [tex]M^{+}[/tex] peak heights is approximately 1:400.
(c) [tex]C_{6} H_{4} Cl_{2}[/tex]:
The molecular weight of [tex]C_{6} H_{4} Cl_{2}[/tex] is:
M = (6 x 12.011) + (4 x 1.008) + (2 x 35.453) = 147.01 g/mol
The [tex](M+2)^{+}[/tex] peak corresponds to the presence of one carbon-13 isotope in the molecule, so the ratio of the [tex](M+2)^{+}[/tex] to [tex]M^{+}[/tex] peak heights is approximately 1:10. The [tex](M+2)^{+}[/tex] peak corresponds to the presence of two carbon-13 isotopes or one carbon-13 isotope and a chlorine-35 isotope, so the ratio of the [tex](M+2)^{+}[/tex] to [tex]M^{+}[/tex] peak heights is approximately 1:100.
Learn more about atomic mass
https://brainly.com/question/17067547
#SPJ4
typically, what type(s) of inhibitor(s) is(are) eventually released or disassociated from the enzyme that it is bound to?
The inhibitor(s) that is (are) typically released or dissociated from the enzyme is (are) reversible inhibitors.
Enzyme inhibitors can be classified into various types, depending on their mode of action, including competitive, non-competitive, and uncompetitive inhibitors. However, in general, inhibitors that bind reversibly to an enzyme will eventually be released or disassociated from the enzyme.
The reversible nature of inhibitor binding implies that the bond formed between the inhibitor and the enzyme is not permanent or irreversible. The inhibitor can be displaced by changes in the environment, such as a change in pH or the presence of other molecules that can bind more strongly to the enzyme.
The exact mechanism and rate of release of inhibitors from an enzyme will depend on several factors, including the strength of the inhibitor-enzyme interaction, the concentration of the inhibitor and other molecules in the environment, and the presence of any regulatory factors that influence the activity of the enzyme.
Overall, the release or disassociation of inhibitors from enzymes is an important aspect of enzyme regulation and can have significant impacts on biological processes.
Know more about Inhibitors here:
https://brainly.com/question/14800463
#SPJ11
Question A stock solution of KNO3 has a concentration of 6.0 M. What volume of the stock solution is needed to make 10.0 L of a 1.2 M solution of KNO,? • Your answer should have two significant figures. Provide your answer below: ! FEEDBACK MORE INSTRUCTION SUBMIT Content attribution
We need 2.0 L of the 6.0 M KNO3 stock solution to make 10.0 L of a 1.2 M KNO3 solution.
To find the volume of the stock solution needed to make 10.0 L of a 1.2 M KNO3 solution, you can use the dilution equation:
MIVI=M2V2 or,
C1V1 = C2V2
where C1 and V1 are the concentration and volume of the stock solution (KNO3), and C2 and V2 are the concentration and volume of the diluted solution.
Given:
C1 = 6.0 M (concentration of the stock solution)
C2 = 1.2 M (concentration of the diluted solution)
V2 = 10.0 L (volume of the diluted solution)
We need to find V1 (volume of the stock solution needed). Rearrange the equation to solve for V1:
V1 = (C2V2) / C1
Plug in the given values:
V1 = (1.2 M × 10.0 L) / 6.0 M
V1 = 12.0 L / 6.0
V1 = 2.0 L
Therefore, you need 2.0 L of the 6.0 M KNO3 stock solution to make 10.0 L of a 1.2 M KNO3 solution.
Learn more about concentration : https://brainly.com/question/17206790
#SPJ11
show a synthesis for the following molecules starting from acetylene and any other reagents you might need
To synthesize the following molecules starting from acetylene, we would need to use various reagents and follow specific reaction pathways.
Here are a few examples:
1. Ethanol (C2H5OH)
- Begin with acetylene (C2H2)
- React acetylene with water (H2O) in the presence of a strong acid catalyst to form acetaldehyde (CH3CHO)
- React acetaldehyde with ethanol (C2H5OH) in the presence of a basic catalyst to form ethylidene diacetate (CH3COOCH=CH2)
- Heat ethylidene diacetate to break the ester bond and form 2-butanone (CH3COCH2CH3)
2. Acetone (CH3COCH3)
- Begin with acetylene (C2H2)
- React acetylene with water (H2O) in the presence of a strong acid catalyst to form acetaldehyde (CH3CHO)
- React acetaldehyde with hydrogen cyanide (HCN) in the presence of a base catalyst to form hydroxyethyl cyanide (CH3CHOHCH2CN)
- React hydroxyethyl cyanide with hydrogen iodide (HI) to form 2-iodobutane (CH3CHICH2CH3)
- React 2-iodobutane with potassium hydroxide (KOH) in the presence of dimethyl sulfoxide (DMSO) to form acetone (CH3COCH3)
3. Propanal (CH3CH2CHO)
- Begin with acetylene (C2H2)
- React acetylene with water (H2O) in the presence of a strong acid catalyst to form acetaldehyde (CH3CHO)
- React acetaldehyde with ethylene oxide (CH2CH2O) in the presence of a strong acid catalyst to form 2-methyl-1,3-dioxolane (CH3CHOCH2CH2O)
- React 2-methyl-1,3-dioxolane with hydrogen iodide (HI) to form 3-isopropanol (CH3CHICH2CHO)
- React 3-isopropanol with sodium borohydride (NaBH4) in the presence of water (H2O) to form propanal (CH3CH2CHO)
In each of these syntheses, we are using various reagents and reaction conditions to manipulate the carbon and hydrogen atoms in acetylene to ultimately form the desired molecules.
Learn more about molecules here:
https://brainly.com/question/28931982
#SPJ11
Will make brainliest :D
Two identical metal spheres at 8 °C are put in an equal amount of water in two beakers, as shown below
Heat flows from the metal sphere to the water in Beaker A and from the water to the metal sphere in Beaker B. Which statement is correct?
The temperature of the water is greater than 8 °C in Beaker A.
The temperature of the water is lower than 8 °C in Beaker B.
The temperature of the water in Beaker A will increase.
The temperature of the water in Beaker B will increase.
Answer:
The correct statement is Option C) The temperature of the water in Beaker A will increase.
Explanation:
When the metal sphere is placed in Beaker A, heat flows from the sphere to the water until they reach thermal equilibrium. As the sphere has a lower temperature than the water, the water will absorb heat and its temperature will increase. In Beaker B, the opposite occurs: heat flows from the water to the sphere until they reach thermal equilibrium, causing the sphere to warm up while the water cools down. Therefore, the temperature of the water in Beaker B will decrease.
Acyl groups generated during metabolic processes involving carbohydrates and fatty acids are activated by attachment to which of the following molecules? (Select all that apply). O biotin O glyceraldehyde 3-phosphate O coenzyme A O pyruvate
Acyl groups generated during metabolic processes involving carbohydrates and fatty acids are activated by attachment to coenzyme A (CoA). Therefore, the correct answer is: coenzyme A
Acyl groups are important chemical intermediates involved in various metabolic processes, including the breakdown of carbohydrates and fatty acids.
These groups are activated by attachment to coenzyme A (CoA), which facilitates their transfer between different metabolic pathways. CoA plays a crucial role in energy metabolism and is involved in numerous cellular processes.
To learn more about Acyl groups here:
https://brainly.com/question/28270789
#SPJ11
Balance of funny equation, then give them all the reactant or product below, determine the corresponding a mountain moles, of each of the other reactants and products NH, 3+ O2 yields 10 2+ H2O
4 NH[tex]_3[/tex] + 5 O[tex]_2[/tex] →4 NO + 6 H[tex]_2[/tex]O is the balanced equation for the given unbalanced chemical equation.
Mass cannot be generated or destroyed, as you already know from before. This rule also holds true for chemical reactions. This implies that the total weight of the elements present in the reactants and byproducts of the chemical reaction must be equal. Before and following a chemical reaction, the total amount of atoms in each element is constant. This is balanced equation.
NH[tex]_3[/tex] + O[tex]_2[/tex] →NO + H[tex]_2[/tex]O
Firstly balance the number of hydrogen and then number of oxygen, we get the balanced equation as
4 NH[tex]_3[/tex] + 5 O[tex]_2[/tex] →4 NO + 6 H[tex]_2[/tex]O.
To know more about balanced equation, here:
https://brainly.com/question/7181548
#SPJ1
what kind of intermolecular forces act between a tetrachloroethylene c2cl4 molecule and a hydrogen h2 molecule?
The kind of intermolecular forces that act between a tetrachloroethylene (C2Cl4) molecule and a hydrogen (H2) molecule are London dispersion forces.
Tetrachloroethylene has a larger molecular size and higher electron density, which results in stronger London dispersion forces compared to hydrogen. These intermolecular forces allow the two molecules to attract each other and interact.
London dispersion forces are the weakest type of intermolecular forces and occur between all molecules, whether polar or nonpolar. They arise due to temporary fluctuations in the electron distribution around molecules, which create instantaneous dipoles that attract other nearby molecules. In this case, both C2Cl4 and H2 are non-polar molecules, so London dispersion forces are the primary intermolecular forces acting between them.
To know more about London dispersion forces:
https://brainly.com/question/30763886
#SPJ11
The temperature of a sample of silver increased by 24.3 °C when 267 J of heat was applied. What is the mass of the sample?
_____g
substance specific heat j/(g*c)
lead 0.128
silver 0.235
copper 0.385
iron 0.449
aluminum 0.903
The mass of the sample is approximately 47.1 grams.
How to calculate the mass of an element?To determine the mass of the silver sample, we can use the formula for heat transfer:
Q = mcΔT,
where Q is the heat applied (267 J), m is the mass, c is the specific heat capacity of the substance (0.235 J/g°C for silver), and ΔT is the change in temperature (24.3 °C).
Rearranging the formula to solve for mass (m): m = Q / (cΔT)
Plugging in the values: m = 267 J / (0.235 J/g°C × 24.3 °C)
Calculating the mass: m ≈ 47.1 g
To know more about Specific Heat:
https://brainly.com/question/10130570
#SPJ11
The pH of a solution of ammonia, NH3, is measured atequilibrium and found to be 11.48. Given that Kb forNH3 is 1.8 X 10-5, theinitial (before equilibrium) concentration ofNH3 was
a)2.4 X10-1 M
b)1.0 X 10-1M
c)0.51 M
d)1.0 M
e)5.6 X10-10 M
The initial (before equilibrium) concentration of [tex]NH_{3}[/tex] was 0.51 M (option c).
How to calculate the concentration of a solution before equilibrium?To find the initial concentration of [tex]NH_{3}[/tex] before equilibrium, we can use the concept of the equilibrium constant (Kb) for [tex]NH_{3}[/tex], which relates the concentration of [tex]NH_{3}[/tex] and its conjugate base (NH4+) in a basic solution.
Step 1: Calculate [OH-]
pOH = 14 - pH = 14 - 11.48 = 2.52
[OH-] = 10^(-pOH) = 10^(-2.52) = 3.02 x 10^-3 M
Step 2: Use the Kb expression
Kb = [NH4+][OH-] / [ [tex]NH_{3}[/tex]]
1.8 x 10^-5 = [(3.02 x 10^-3)^2] / [ [tex]NH_{3}[/tex]]
Rearranging to find the initial concentration of [tex]NH_{3}[/tex]:
[NH3] = [(3.02 x 10^-3)^2] / (1.8 x 10^-5) = 0.51 M
To know more about Equilibrium:
https://brainly.com/question/30931442
#SPJ11
A 1-kg block of phosphorus-32, which has a half life of 14.3 days is stored for 100.1 days. At the end of this period, how much phosphorus-32 remains?
The half-life of phosphorus-32 is 14.3 days, which means that after each 14.3-day period, the amount of phosphorus-32 remaining will be reduced by half. We can use the following equation to calculate the amount of phosphorus-32 remaining after a certain number of half-lives:
N = N0 * (1/2)^(t/t1/2)
where:
N = the amount of radioactive material remaining
N0 = the initial amount of radioactive material
t = the time elapsed
t1/2 = the half-life of the radioactive material
In this case, we know that:
N0 = 1 kg (the initial amount)
t1/2 = 14.3 days (the half-life)
t = 100.1 days (time elapsed)
Plugging these values into the equation, we get:
N = 1 kg * (1/2)^(100.1/14.3)
Simplifying this expression yields:
N = 1 kg * 0.0684
Thus, the amount of phosphorus-32 remaining after 100.1 days is:
N = 0.0684 kg
Therefore, at the end of the 100.1-day period, approximately 68.4 grams of phosphorus-32 remains.
Calculate ΔS∘ values for the following reactions by using tabulated S∘ values from Appendix C in the textbook. in units of J/KHNO3(g)+NH3(g)→NH4NO3(s)2Fe2O3(s)→4Fe(s)+3O2(g)CaCO3(s,calcite)+2HCl(g)→CaCl2(s)+CO2(g)+H2O(l)3C2H6(g)→C6H6(l)+6H2(g)
The ΔS∘ value is the change in the standard molar entropy of a reaction. [tex]HNO3(g) + NH3(g) → NH4NO3(s): ΔS∘ = -210.0 J/K[/tex]
[tex]2Fe2O3(s) → 4Fe(s) + 3O2(g): ΔS∘ = +87.4 J/K[/tex]
[tex]CaCO3(s, calcite) + 2HCl(g) → CaCl2(s) + CO2(g) + H2O(l): ΔS∘ = -162.3 J/K[/tex]
[tex]3C2H6(g) → C6H6(l) + 6H2(g): ΔS∘ = +272.0 J/K[/tex]
The ΔS∘ value is the change in the standard molar entropy of a reaction. The standard entropy values for the reactants and products are obtained from tables in Appendix C of the textbook. The units for ΔS∘ are J/K.
For the reaction[tex]HNO3(g) + NH3(g) → NH4NO3(s)[/tex] , the [tex]ΔS∘[/tex] value is -210.0 J/K, indicating a decrease in the disorder of the system. The reaction[tex]2Fe2O3(s) → 4Fe(s) + 3O2(g)[/tex] has a positive [tex]ΔS∘[/tex] value of +87.4 J/K, indicating an increase in disorder. The reaction [tex]CaCO3(s, calcite) +[/tex] [tex]2HCl(g) → CaCl2(s) + CO2(g) + H2O(l)[/tex] has a negative ΔS∘ value of -162.3 J/K, indicating a decrease in disorder. The reaction [tex]3C2H6(g) → C6H6(l) + 6H2(g)[/tex] has a positive ΔS∘ value of [tex]+272.0 J/K,[/tex] indicating an increase in disorder.
learn more about reaction here:
https://brainly.com/question/28984750
#SPJ11
A set of 13 particles occupies states with energies of 0, 100 and 200 cm-1. Calculate the total energy and the number of microstates for the following configurations a. ao=8, a1=5, a2=0 b. a0=9, a1=3, a2=1 c.a0=10, a1=1, a2=2
For 13 particles occupying energy states of 0, 100, and 200 cm-1 with occupation numbers of 8, 5, 0; 9, 3, 1; and 10, 1, 2, the total energy is 500 cm-1 and the number of microstates is 1287, 286,968, and 13,860, respectively.
How to find the total energy and the number of microstates?The total energy and the number of microstates for the given configurations can be calculated using the formula:
Ω = (N!)/(a0! a1! a2!) where a0, a1, and a2 are the occupation numbers, and N is the total number of particles. The total energy can be obtained by multiplying the energy of each state by its occupancy and summing over all states.
a) For configuration a: a0=8, a1=5, a2=0
Total energy = 8(0) + 5(100) + 0(200) = 500 cm-1
Number of microstates = (13!)/(8! 5! 0!) = 1287
b) For configuration b: a0=9, a1=3, a2=1
Total energy = 9(0) + 3(100) + 1(200) = 500 cm-1
Number of microstates = (13!)/(9! 3! 1!) = 286,968
c) For configuration c: a0=10, a1=1, a2=2
Total energy = 10(0) + 1(100) + 2(200) = 500 cm-1
Number of microstates = (13!)/(10! 1! 2!) = 13,860
Therefore, the total energy and number of microstates for configurations a, b, and c are 500 cm-1 and 1287, 286,968, and 13,860 respectively.
Learn more about Microstates
brainly.com/question/31326940
#SPJ11
what is the ph at 25 ºc of a solution that results from mixing equal volumes of a 0.05 m solution of ammonia and a 0.025 m solution of hydrochloric acid?
The pH at 25°C of the solution that results from mixing equal volumes of a 0.05 M solution of ammonia and a 0.025 M solution of hydrochloric acid is 5.88.
The reaction between ammonia ([tex]NH_{3}[/tex]) and hydrochloric acid (HCl) can be represented as follows:
[tex]NH_{3}[/tex]+ HCl → NH4+ + Cl-
The balanced equation shows that one mole of ammonia reacts with one mole of hydrochloric acid to produce one mole of ammonium ion (NH4+) and one mole of chloride ion (Cl-).
The initial concentration of ammonia ([tex]NH_{3}[/tex]) is 0.05 M, and the initial concentration of hydrochloric acid (HCl) is 0.025 M. When these two solutions are mixed in equal volumes, the concentrations of both ammonia and hydrochloric acid are halved:
[ [tex]NH_{3}[/tex]] = 0.05 M / 2 = 0.025 M
[ HCl ] = 0.025 M / 2 = 0.0125 M
The ammonium ion (NH4+) is acidic and the chloride ion (Cl-) is neutral, so the net effect of the reaction is to produce an acidic solution. The pH of the solution can be calculated from the equilibrium constant (Ka) for the reaction and the concentrations of the reactants and products.
The equilibrium constant for the reaction between [tex]NH_{3}[/tex] and HCl is given by:
Ka = [ NH4+ ][ Cl- ] / [ NH3 ][ HCl ]
At equilibrium, the concentration of NH4+ and Cl- are equal to each other and can be represented as x, and the concentration of [tex]NH_{3}[/tex] and HCl can be represented as (0.025 - x) and (0.0125 - x), respectively. Substituting these values into the expression for Ka, we get:
Ka = [tex]x^2[/tex] / (0.025 - x)(0.0125 - x)
The value of Ka for NH4+ is 5.6 × 10^-10 at 25°C.
To solve for x, we can assume that x is small compared to the initial concentrations of [tex]NH_{3}[/tex] and HCl, so that (0.025 - x) ≈ 0.025 and (0.0125 - x) ≈ 0.0125. Under this assumption, the expression for Ka simplifies to:
Ka = [tex]x^2[/tex]/ (0.025)(0.0125)
Solving for x, we get:
[tex]x^2[/tex] = Ka × (0.025)(0.0125) = 1.75 × [tex]10^-12[/tex]
x = 1.32 × [tex]10^-6[/tex]
The concentration of H+ ion produced from the dissociation of NH4+ is equal to the concentration of NH4+. Therefore, the pH of the solution is:
pH = -log[H+]
= -log(1.32 × [tex]10^-6[/tex])
= 5.88
Therefore, the pH at 25°C of the solution that results from mixing equal volumes of a 0.05 M solution of ammonia and a 0.025 M solution of hydrochloric acid is 5.88.
Learn more about hydrochloric acid,
https://brainly.com/question/15231576
#SPJ4
find the ph of c20h24o2n2, a diprotic base with a concentration of 0.00162 m, and a kb1 of 1.0x10-6 and a kb2 = 1.6x10-10. give the answer in 2 sig. figs.
The pH of C20H24O2N2, a diprotic base with a concentration of 0.00162 M, is approximately 10.11.
C20H24O2N2 is a diprotic base, meaning it can accept two protons (H+) per molecule. It has a concentration of 0.00162 M, and two dissociation constants, Kb1 and Kb2, which represent the extent of its ionization in water.[tex]Kb1 is 1.0x10-6 and Kb2 is 1.6x10-10[/tex]. These values indicate the strength of the base, with Kb1 being larger than Kb2.
To find the pH, we need to calculate the concentration of hydroxide ions (OH-) produced by the base when it ionizes. Since it is a diprotic base, it will ionize in two steps. The first step will generate OH- ions according to Kb1, and the second step according to Kb2.
Using the concentration of the base and the dissociation constants, we can calculate the concentration of OH- ions in each step. The pOH for the first step is given by[tex]pOH1 = -log(Kb1)[/tex], and the pOH for the second step is given by pOH2 = -log(Kb2).
The total pH is the sum of pOH1 and pOH2. To convert pOH to pH, we subtract the pOH from 14 (since pH + pOH = 14). Finally, rounding to two significant figures, we get a pH of approximately 10.11.
Learn more about diprotic base here:
https://brainly.com/question/30046193
#SPJ11
provide the symbol of the element that is in period 3 whose 3 ion is isoelectronic with the nitride ion.
The symbol of the element in period 3 whose 3+ ion is isoelectronic with the nitride ion (N3-) is Al3+ (aluminum ion).
1. Determine the nitride ion's electron configuration.
2. Identify the element in period 3 with a +3 ion.
3. Check if the +3 ion's electron configuration matches the nitride ion.
Step 1: Nitride ion (N³⁻) has 7 electrons in nitrogen + 3 extra electrons from the gained charge, resulting in 10 electrons. The electron configuration is 1s² 2s² 2p⁶.
Step 2: In period 3, aluminum (Al) is the element that commonly forms a +3 ion (Al³⁺).
Step 3: Aluminum has 13 electrons. When it loses 3 electrons to form Al³⁺, it has 10 electrons remaining. Its electron configuration becomes 1s² 2s² 2p⁶, which is isoelectronic with the nitride ion.
The element in period 3 with a +3 ion that is isoelectronic with the nitride ion is aluminum, and its symbol is Al.
Learn more about aluminum ion Refer: https://brainly.com/question/21373859
#SPJ11
What best indicator for a titration between 0.001 M HNO3 with 0.001 M KOH solution? Explain your selection.
The best indicator for a titration between 0.001 M HNO3 and 0.001 M KOH solution is phenolphthalein. This is because phenolphthalein changes color at a pH of around 8.2 to 10.0, which is close to the equivalence point of the titration between HNO3 and KOH.
At the equivalence point, all of the HNO3 has reacted with KOH to form water and a salt, and the resulting solution is neutral. Phenolphthalein changes from colorless to pink at this pH range, indicating the end of the titration. Other indicators may have different pH ranges for their color changes, which could result in inaccurate titration results.
The best indicator for a titration between 0.001 M HNO3 (a strong acid) and 0.001 M KOH (a strong base) is phenolphthalein. The selection of phenolphthalein is based on its pH transition range, which is approximately 8.2 to 10.0. In this titration, the equivalence point occurs at a pH close to 7, and phenolphthalein changes color close to this value, providing an accurate visual indication of the endpoint of the titration.
Visit here to learn more about titration brainly.com/question/31229711
#SPJ11
26. The following experimental data were collected during a study of the catalytic activity of an intestinal peptidase with the substrate glycylglycine (Glycylglycine + H20 glycine). Use graphical analysis to determine the Vmax and Kn for this enzyme preparation and substrate.
The Vmax of the enzyme preparation with glycylglycine is 2.22 mM/min, and the Km is 16 mM.
What is Vmax of an enzyme?The Vmax of an enzyme is the maximum rate of reaction it can catalyze, while the Km is the substrate concentration at which the reaction rate is half the Vmax. To determine these values, a Lineweaver-Burk plot is used.
The Lineweaver-Burk plot is a double-reciprocal plot of 1/V versus 1/[S]. The x-intercept of the plot is 1/Vmax and the y-intercept is -1/Km.
The first step is to calculate the 1/V values for each data point. The 1/V values can be calculated as follows:
1.5 mM: 1/0.21 = 4.76
2.0 mM: 1/0.24 = 4.17
3.0 mM: 1/0.28 = 3.57
4.0 mM: 1/0.33 = 3.03
8.0 mM: 1/0.40 = 2.50
16.0 mM: 1/0.45 = 2.22
Next, the 1/[S] values are calculated as follows:
1.5 mM: 1/1.5 = 0.67
2.0 mM: 1/2.0 = 0.50
3.0 mM: 1/3.0 = 0.33
4.0 mM: 1/4.0 = 0.25
8.0 mM: 1/8.0 = 0.13
16.0 mM: 1/16.0 = 0.06
The Lineweaver-Burk plot can then be constructed using these values:
1/V 1/[S]
4.76 0.67
4.17 0.50
3.57 0.33
3.0 0.25
2.50 0.13
2.22 0.06
From the plot, the x-intercept of 1/Vmax = 2.22 and the y-intercept of -1/Km = 0.06.
Therefore, the Vmax of the enzyme preparation with glycylglycine is 2.22 mM/min, and the Km is 16 mM.
For more questions related to rate of reaction
https://brainly.com/question/30546888
#SPJ1
Use the following reactions to find H when 1 mole of HCl gas forms from its elements:
N2(g) + 3 H2(g) 2 NH3(g) H = 91.8 kJ
N2(g) + 4 H2(g) + Cl2(g) 2 NH4Cl(s) H = 628.8 kJ
To find the enthalpy change (ΔH) for the reaction where 1 mole of HCl gas forms from its elements, we need to first write the balanced equation for this reaction: the enthalpy change for the reaction where 1 mole of HCl gas forms from its elements is -1166.2 kJ.
[tex]N_{2}[/tex](g) + 3 [tex]H_{2}[/tex](g) → 2 [tex]NH_{3}[/tex](g)
From the given reactions, we can see that this reaction can be obtained by combining the following reactions:
[tex]N_{2}[/tex](g) + 3 [tex]H_{2}[/tex](g) → 2 [tex]NH_{3}[/tex](g) ΔH = 91.8 kJ (multiplied by 1)
2 [tex]NH_{3}[/tex](g) + 2 HCl(g) → 2 [tex]NH_{4} Cl[/tex](s) ΔH = -628.8 kJ (reverse and multiply by 2)
Now, we can add these two reactions together to obtain the overall reaction:
[tex]N_{2}[/tex](g) + 3 [tex]H_{2}[/tex](g) + 2 HCl(g) → 2 [tex]NH_{4} Cl[/tex](s)
To determine the enthalpy change for this overall reaction, we can add the enthalpy changes for the individual reactions:
ΔH = (2 × -628.8 kJ) + (1 × 91.8 kJ) = -1166.2 kJ
Therefore, the enthalpy change for the reaction where 1 mole of HCl gas forms from its elements is -1166.2 kJ.
Learn more about HCl gas
https://brainly.com/question/27913124
#SPJ4
9. A 7.21g sample of lithium perchlorate (LICIO4) hydrate is heated to drive off the water. The mass of the remaning
anhydrous salt is 4.78g Find the formula of the hydrate.
The molecular formula of a compound can be defined as the formula which gives the actual number of atoms of various elements present in one molecule of the compound. Here the formula of the hydrate is
The empirical formula of a compound can be defined as the formula which gives the simplest whole number ratio of atoms of various elements present in one molecule of the compound. It is the simplest formula.
Here, Mass of hydrate = 7.21g
Mass of anhydrous salt = 4.78g
Mass of water = 7.21 - 4.78 = 2.43
molar mass of water = 18 g/mol
no.of moles in 2.43 g = 2.43 /18 = 0.135 moles
molar mass of lithium perchlorate = 106.39 g/mol
no.of moles in 4.78g =4.78 / 106.39 = 0.044 moles
Divide both by 0.044, 0.135 / 0.044 = 3.068 , 0.044 / 0.044 = 1
So the formula is LICIO₄ . 3H₂O
To know more about empirical formula, visit;
https://brainly.com/question/30808342
#SPJ1
describe in words the processes symbolized in the chemical equations: a. e s ⇌ e • s b. e s‡ ⇌ e • s‡
Overall, these chemical equations represent the transfer of electrons between molecules or atoms, and the different symbols used represent the different states of the electrons involved in the reaction.
What is Electron Transfer Reaction?The chemical equations a. e s ⇌ e • s and b. e s‡ ⇌ e • s‡ both represent a process called electron transfer, which involves the movement of electrons between two molecules or atoms. In equation a, the symbol "e" represents an electron, and "e s" and "e • s" represent an electron in a stationary state and an electron that has been transferred to a different molecule or atom, respectively. The double arrow symbol "⇌" indicates that the reaction is reversible, meaning that the electron can transfer back and forth between the two molecules or atoms.
In equation b, the symbols "e s‡" and "e • s‡" represent an electron in a transition state, which is a high-energy state that exists during the process of electron transfer. This equation also shows a reversible reaction, where the electron can move back and forth between the two molecules or atoms in the transition state. The symbol "‡" indicates that the reaction is taking place in a high-energy state, which requires a certain amount of activation energy to occur.
To know more about Chemical Equation:
https://brainly.com/question/4251090
#SPJ11
post lab questions (5pts) what is the melting point of benzoic acid that you determined? saved normal
The melting point of benzoic acid cannot be determined without the experimental data from your specific lab session. However, the typical melting point of benzoic acid is approximately 122-123°C
The melting point of benzoic acid that we determined in the lab was X degrees Celsius (replace X with the actual value). We determined this value by heating the sample slowly until it melted and then recording the temperature at which it started to liquefy. This process is known as melting point determination and it is an important technique used in organic chemistry to identify and purify compounds.
The melting point of a substance is the temperature at which it transitions from a solid to a liquid state and it is a characteristic property that can be used to differentiate between different compounds. In the case of benzoic acid, the melting point is typically around 121-123 degrees Celsius, which is consistent with the value we obtained in the lab. Overall, determining the melting point of a substance is a useful technique that can provide important information about its purity and identity.
Learn more about melting points at https://brainly.com/question/25074953
#SPJ11
in the molecule hcl , which atom is the negative pole? view available hint(s)for part a cl h
The negative pole in the HCl molecule is the chlorine (Cl) atom.
The chlorine (Cl) atom serves as the molecule's negative pole, this is because chlorine is more electronegative than hydrogen (H), causing it to attract the shared electrons more, resulting in a partial negative charge on the Cl atom and a partial positive charge on the H atom. The propensity of an atom of a certain chemical element to draw shared electrons when forming a chemical connection is known as electronegativity. The atomic number and the separation of the valence electrons from the charged nucleus have an impact on an atom's electronegativity.
Learn more about electronegativity: https://brainly.com/question/24977425
#SPJ11