Remember partially filled arrays where the number of elements stored in the array can be less than its capacity (the maximum number of elements allowed). We studied two different ways to represent partially filled arrays: 1) using an int variable for the numElems and 2) using a terminating value to indicate the end of elements called the sentinel value. In the code below, please fill in the details for reading values into the latter type of array that uses a sentilnel value. Don't forget to complete the printArray function.
#include
using namespace std;
void printArray(int array[]);
// Implement printArray as defined with one array parameter
int main()
{
const int CAPACITY=21;
int array[CAPACITY]; // store positive/negative int values, using 0 to indicate the end of partially filled array
cout <<"Enter up to " << CAPACITY-1 << " non-zero integers, enter 0 to end when you are done\n";
//To do: Write a loop to read up the int values and store them into array a.
// Stop reading if the user enters 0 or the array a is full.
//To do: store 0 to indicate the end of values in the array
//Display array function
printArray(array);
return 0;
}
// To do: implement display for the given array
void printArray(int array[])
{
}

Answer:

Complete the main method as follows:

int num;

cin>>num;

int i = 0;

while(num!=0){

array[i] = num;  

cin>>num;

i++;

}

Complete the printArray function as follows:

void printArray(int array[]){

int i =0;

while(array[i]!=0){

   cout<<array[i]<<" ";

   i++;

}}

Explanation:

Main method

This declares a variable that gets input from the user

int num;

This gets input from the user

cin>>num;

This initializes a count variable to 0. It represents the index of the current array element

int i = 0;

while(num!=0){

This inserts the inputted number to the array

array[i] = num;

This gets another input  

cin>>num;

The counter is incremented by 1

i++;

}

The above loop is repeated until the users enters 0

printArray method

This declares the array

void printArray(int array[]){

This initializes a counter variable to 0

int i =0;

This is repeated until array element is 0

while(array[i]!=0){

Print array element

   cout<<array[i]<<" ";

Increase counter by 1

   i++;

}}

See attachment for complete program

Imaging a computer is part of what phase of conversion?
a. Backup
b. Configuration
c. Procurement

How many cycles would it take to complete these multicycle instructions after pipelining assuming: Full forwarding 1 Adder that takes 2 cycles (subtraction uses the adder) 1 Multiplier that takes 10 cycles 1Divider that takes40 cycles 1 Integer ALU that takes1cycle(Loads and Stores) You can write and read from the register file in the same cycle. Begin your your cycle counting from 1 (NOT 0)

Question 12 of 30
In Alienware systems, errors are indicated via the tricolor Power Button LED.
True
False

What programming language does the LMC 'understand'?

You are asked to write a program that will display a letter that corresponds with a numeric rating system. The program should use a switch statement. The numeric rating is stored in a variable named rate and rate may equal 1, 2, 3, or 4. The corresponding letter is stored in a variable named grade and grade may be A, B, C, or D. Which is the test expression for this switch statement

1. Define Primary Key. Why do we need primary key ?

2. Define Field size.

3. Define Validation Rule.

4. . Not leaving the house and a lack of exercise can cause health problems like obesity. TRUE OR FALSE

5. Rebecca only works 3 days in a week but she works longer hours each day to ensure she hits the 40-hour work week.
-art-time working
-Compressed hours
-Job sharing
-Flexible hour

The memory hierarchy of a computer system organizes storage by using small, fast, expensive memories at the top of the hierarchy and supplementing them with larger, slower, cheaper memories at each successive level. Explain how the principle of memory locality makes such a system capable of providing efficient access to the data and instructions needed for executing programs.

A restaurant recorded the ages of customers on two separate days. You are going to write a program to compare the number of customers in their twenties (ages 20 to 29). What is the missing line of code to count the number of customers in their twenties? customerAges = [13, 3, 11, 24, 35, 25, 15, 18, 1] count20s = 0 if 20 <= item <= 29: count20s = count20s + 1

29. Write a program in a script file that calculates the cost of renting a car according to the following price schedule: The program asks the user to enter the type of car (sedan or SUV), the number of days, and the number of miles driven. The program then displays the cost (rounded to cents) for the rent. Run the program three times for the following cases: (a) Sedan, 10 days, 769 miles. (b) SUV, 32 days, 4,056 miles. (c) Sedan, 3 days, 511 miles.

Consider the following class declarations.

public class Dog
{
private String name;
public Dog()
{
name = "NoName";
}
}
public class Poodle extends Dog
{
private String size;
public Poodle(String s)
{

size = s;
}
}

The following statement appears in a method in another class.
Poodle myDog = new Poodle("toy");
Which of the following best describes the result of executing the statement?

a. The Poodle variable myDog is instantiated as a Poodle. The instance variable size is initialized to "toy". The instance variable name is not assiged a value.
b. The Poodle variable myDog is instantiated as a Poodle. The instance variable size is initialized to "toy". An implicit call to the no-argument Dog constructor is made, initializing the instance variable name to "NoName".
c. The Poodle variable myDog is instantiated as a Poodle. The instance variable size is initialized to "toy". An implicit call to the no-argument Dog constructor is made, initializing the instance variable name to "toy".
d. A runtime error occurs because super is not used to call the no-argument Dog constructor.
e. A runtime error occurs because there is no one-argument Dog constructor.

3.5.6 Introduce Yourself, Part 2


please hellllpp it keeps saying the code is wrong

Can someone help me calculate this Multimedia math:

A monochrome sequence (black and white) uses a frame size of 176 x 144 pixels and has 8 bits/pixels. Registered with Frame Rate 10 frames/sec. Video is transmitted through a 64 Kbit/sec bandwidth line.
(a) Calculate Compression Ratio (Crude Bit Speed / Compressed Bit Speed) which will be needed.
(b) What will happen if the Ratio compression is higher than it in (a)?
(c) What will happen if the Ratio compression is lower than it in (a)?

please help
Consider the following code segment.

int a = 0;
int b = 3;

while ((b != 0) && ((a / b) >= 0)
{
a = a + 2;
b = b - 1;
}
What are the values of a and b after the while loop completes its execution?

a = 4, b = 1
a = 0, b = 3
a = 6, b = 0
a = 8, b = -1

king(a. has eaten b.ate c.had eaten) when Airah called​

please help me on this coding problem :)

Consider the following code segment.

int a = 0;
int b = 3;

while ((b != 0) && ((a / b) >= 0)
{
a = a + 2;
b = b - 1;
}
What are the values of a and b after the while loop completes its execution?

a = 4, b = 1
a = 0, b = 3
a = 6, b = 0
a = 8, b = -1

See the picture and answer the coding question

HELP PLEASE
What will be printed to the console after this program runs?
var numbers = [2, 5, 3, 1, 6]
function changeNums(numList, addNum, subtractNum) {
for(var i=0; i if(numList[i] % 3 == 0){
numList[i] = numList[i] + addNum;
} else {
numList[i] = numList[i] - subtract Num;
}
}
}
changeNums (numbers, 3, 2);
console.log(numbers);

Write Inheritance program for the following scenario. Employee is super class where as Manager and Regular are the sub class. Partial Employee class is created, you have to complete the Employee class and implement Manager and Regular class. The main is class is given that creates objects of all classes and displays the output.
• The subclasses uses super keyword in the constructor to assigned the data.
• All the classes implements toString() method.

An administrative assistant is responsible for scheduling appointments at a doctor’s office. Which component would allow the administrative assistant to enter each patient’s name, date of birth, doctor’s name, and appointment date and time?

Consider the following static method, calculate.

public static int calculate(int x)
{
x = x + x;
x = x + x;
x = x + x;

return x;
}
Which of the following can be used to replace the body of calculate so that the modified version of calculate will return the same result as the original version for all values of x?

return 8 * x;
return 3 + x;
return 3 * x;
return 6 * x;
return 4 * x;

what is the perpose of the boolean variable swaps in this buble sort algorithm

What are the characteristics of a good text-based adventure game? In other words, what are some features that should be in the game to make it appealing to players?

.
T
Which of the following objects are not contained within
an Access database?
Select one:
a Tables and forms,
b. Queries and reports.
c. Macros and Modules
d. Web sites and worksheets​

Where should a photographer place lights for a headshot? Headshot lighting is more important with darker backgrounds. The light should be at a 45-degree angle from the subject. The light should be in front of the subject. The third light should be the subject to form a ring of light around the subject’s hair.

PLZZ HELP HELP EL
SMMSNSM

In JavaScript what is the resulting value of answer for answer = 5 + 3 * 2? Explain why the answer is not 16.

How can you create the first row of the table as the header of the table?
In the Insert Table dialog box, you select the ______
checkbox to create the first row as the header of the table.

Please help meeee , you will get 20 points

When it comes to paying bills at restaurants, Wallace always leaves a 15% tip based on the pretax price. However, Wallace is tired of computing tips every time, please construct a function total_bill, which takes a numerical argument pretax and returns the total bill by 1) calculating the tip, 2) the after-tax price, and 3) adding the tip to the after-tax price. Assume the sale tax is 9%. Below is how the function would be used:
pretax = 15
print('The total bill is ${}'.format(total_bill(pretax)))
The output should be:
The total bill is $18.6

When is blue for when the instance in which the directory of compulsion in the air!