Based on the information given, we can assume that "x" represents the price of sandwiches, and "demand" refers to the quantity of sandwiches that consumers are willing and able to buy at that particular price. The term "market" refers to the overall demand for sandwiches in the entire market, rather than just one individual consumer.
If x = 1, we can look at the table to see that the quantity demanded is 6 sandwiches. We can use this information to calculate the slope of the market demand curve, which represents the relationship between the price of sandwiches and the quantity demanded by all consumers in the market.
To calculate the slope, we need to find two points on the demand curve. Let's use the points (1,6) and (2,4), since they are the closest to x=1. We can use the slope formula:
slope = (y2 - y1) / (x2 - x1)
slope = (4 - 6) / (2 - 1)
slope = -2
So the slope of the market demand curve when the price is on the vertical axis is -2. However, none of the answer choices given match this result.
The closest answer is (b) -1/3, but this is not correct based on the calculations we just did.
Therefore, the correct answer cannot be determined with the information given.
To learn more about “demand” refer to the https://brainly.com/question/1245771
#SPJ11
In each of Problems 13 through 16, find the inverse Laplace transform of the given function. 13. F(s)=(s−2)43! 14. F(s)=s2+s−2e−2s 15. F(s)=s2−2s+22(s−1)e−2s 16. F(s)=se−s+e−2s−e−3s−e−4s
The inverse Laplace transform of the given function f(t) are (1/6)t^3 - 1/30, t^2 + t - 3e^(-2t), t(e^t - te^t) + 2u(t-2)e^(t-2), (1/4)*[1 - e^(t-2) - 2e^(t-3) + 3e^(t-4)]*u(t-4) and e^(-t) + e^(-2t) - e^(-3t) - e^(-4t).
Using the formula for the inverse Laplace transform of a constant multiple of a function, we can see that
L⁻¹[(s-2)/(4!)] = L⁻¹[s/(4!)] - 2L⁻¹[1/(4!)]
= 1/3! * t^3 - 2/4!
= (1/6)t^3 - 1/30
So, the inverse Laplace transform of F(s) = (s-2)/(4!) is (1/6)t^3 - 1/30.
To find the inverse Laplace transform of F(s) = s^2 + s - 2e^(-2s), we can first use partial fractions to write
F(s) = (s+2)(s-1) - 3/(s+2)
Then, we can use the formulas for the inverse Laplace transform of the terms on the right-hand side
L⁻¹[(s+2)(s-1)] = L⁻¹[s^2 + s] = t^2 + t
L⁻¹[3/(s+2)] = 3e^(-2t)
So, by linearity of the inverse Laplace transform, we have
L⁻¹[F(s)] = L⁻¹[(s+2)(s-1)] - L⁻¹[3/(s+2)] = t^2 + t - 3e^(-2t)
Therefore, the inverse Laplace transform of F(s) is t^2 + t - 3e^(-2t).
We can start by factoring the numerator of F(s)
F(s) = (s-1)(s-1)e^(-2s) + 2e^(-2s)
Then, we can use the formulas for the inverse Laplace transform of the terms on the right-hand side
L⁻¹[(s-1)(s-1)e^(-2s)] = L⁻¹[(s-1)^2/s] = t(e^t - te^t)
L⁻¹[2e^(-2s)] = 2L⁻¹[e^(-2s)] = 2u(t-2)
where u(t) is the unit step function.
So, by linearity of the inverse Laplace transform, we have
L⁻¹[F(s)] = L⁻¹[(s-1)(s-1)e^(-2s)] + L⁻¹[2e^(-2s)/(s-1)]
= t(e^t - te^t) + 2u(t-2)e^(t-2)
Therefore, the inverse Laplace transform of F(s) is t(e^t - te^t) + 2u(t-2)e^(t-2).
To find the inverse Laplace transform of F(s) = s*e^(-s) + e^(-2s) - e^(-3s) - e^(-4s), we can use partial fraction decomposition and standard Laplace transforms.
First, let's rewrite F(s) as a sum of four terms
F(s) = s*e^(-s) + e^(-2s) - e^(-3s) - e^(-4s)
= s/(s+1) + 1/(s+2) - 1/(s+3) - 1/(s+4)
Next, we can find the inverse Laplace transform of each term using the Laplace transform table
L^-1{s/(s+1)} = e^(-t)
L^-1{1/(s+2)} = e^(-2t)
L^-1{-1/(s+3)} = -e^(-3t)
L^-1{-1/(s+4)} = -e^(-4t)
Therefore, the inverse Laplace transform of F(s) is
L^-1{F(s)} = e^(-t) + e^(-2t) - e^(-3t) - e^(-4t)
So the inverse Laplace transform of F(s) is a sum of exponential functions, each with a negative exponent.
To know more about inverse Laplace transform:
https://brainly.com/question/31322563
#SPJ4
The inverse Laplace transform of the given function f(t) are (1/6)t^3 - 1/30, t^2 + t - 3e^(-2t), t(e^t - te^t) + 2u(t-2)e^(t-2), (1/4)*[1 - e^(t-2) - 2e^(t-3) + 3e^(t-4)]*u(t-4) and e^(-t) + e^(-2t) - e^(-3t) - e^(-4t).
Using the formula for the inverse Laplace transform of a constant multiple of a function, we can see that
L⁻¹[(s-2)/(4!)] = L⁻¹[s/(4!)] - 2L⁻¹[1/(4!)]
= 1/3! * t^3 - 2/4!
= (1/6)t^3 - 1/30
So, the inverse Laplace transform of F(s) = (s-2)/(4!) is (1/6)t^3 - 1/30.
To find the inverse Laplace transform of F(s) = s^2 + s - 2e^(-2s), we can first use partial fractions to write
F(s) = (s+2)(s-1) - 3/(s+2)
Then, we can use the formulas for the inverse Laplace transform of the terms on the right-hand side
L⁻¹[(s+2)(s-1)] = L⁻¹[s^2 + s] = t^2 + t
L⁻¹[3/(s+2)] = 3e^(-2t)
So, by linearity of the inverse Laplace transform, we have
L⁻¹[F(s)] = L⁻¹[(s+2)(s-1)] - L⁻¹[3/(s+2)] = t^2 + t - 3e^(-2t)
Therefore, the inverse Laplace transform of F(s) is t^2 + t - 3e^(-2t).
We can start by factoring the numerator of F(s)
F(s) = (s-1)(s-1)e^(-2s) + 2e^(-2s)
Then, we can use the formulas for the inverse Laplace transform of the terms on the right-hand side
L⁻¹[(s-1)(s-1)e^(-2s)] = L⁻¹[(s-1)^2/s] = t(e^t - te^t)
L⁻¹[2e^(-2s)] = 2L⁻¹[e^(-2s)] = 2u(t-2)
where u(t) is the unit step function.
So, by linearity of the inverse Laplace transform, we have
L⁻¹[F(s)] = L⁻¹[(s-1)(s-1)e^(-2s)] + L⁻¹[2e^(-2s)/(s-1)]
= t(e^t - te^t) + 2u(t-2)e^(t-2)
Therefore, the inverse Laplace transform of F(s) is t(e^t - te^t) + 2u(t-2)e^(t-2).
To find the inverse Laplace transform of F(s) = s*e^(-s) + e^(-2s) - e^(-3s) - e^(-4s), we can use partial fraction decomposition and standard Laplace transforms.
First, let's rewrite F(s) as a sum of four terms
F(s) = s*e^(-s) + e^(-2s) - e^(-3s) - e^(-4s)
= s/(s+1) + 1/(s+2) - 1/(s+3) - 1/(s+4)
Next, we can find the inverse Laplace transform of each term using the Laplace transform table
L^-1{s/(s+1)} = e^(-t)
L^-1{1/(s+2)} = e^(-2t)
L^-1{-1/(s+3)} = -e^(-3t)
L^-1{-1/(s+4)} = -e^(-4t)
Therefore, the inverse Laplace transform of F(s) is
L^-1{F(s)} = e^(-t) + e^(-2t) - e^(-3t) - e^(-4t)
So the inverse Laplace transform of F(s) is a sum of exponential functions, each with a negative exponent.
To know more about inverse Laplace transform:
https://brainly.com/question/31322563
#SPJ4
use cylindrical coordinates. evaluate 2(x3 xy2) dv, where e is the solid in the first octant that lies beneath the paraboloid z = 1 − x2 − y2. echegg
The value of the integral is 1/14. This can be answered by the concept of Integration.
To evaluate the integral using cylindrical coordinates, we first need to determine the bounds of integration. Since the solid is in the first octant, we know that:
- 0 ≤ ρ ≤ 1 (from the equation of the paraboloid)
- 0 ≤ θ ≤ π/2 (from the first octant condition)
- 0 ≤ z ≤ 1 - ρ^2 (from the equation of the paraboloid)
Now, we can write the integral as:
∫∫∫ (2x³y + 2x y³) dz dρ dθ
We can simplify the integrand by substituting x = ρ cosθ and y = ρ sinθ, which gives:
2(ρ⁶ cos³θ sinθ + ρ⁶ cosθ sin³θ) dz dρ dθ
Now, we can evaluate the integral using these bounds and the substitution:
∫0^(π/2) ∫0¹ ∫0^(1-ρ²) 2(ρ⁶ cos³θ sinθ + ρ⁶ cosθ sin³θ) dz dρ dθ
Evaluating the innermost integral with respect to z gives:
2(ρ⁶ cos³θ sinθ + ρ⁶ cosθ sin³θ) (1 - ρ²) dρ dθ
Integrating this with respect to ρ gives:
(2/7)(cos³θ sinθ + cosθ sin³θ) dθ
Finally, integrating this with respect to θ gives:
(2/7)(1/4) = 1/14
Therefore, the value of the integral is 1/14.
To learn more about Integration here:
brainly.com/question/18125359#
#SPJ11
a rectangle initially has dimensions 4 cm by 8 cm. all sides begin increasing in length at a rate of 4 cm /s. at what rate is the area of the rectangle increasing after 20 s?
Answer:
688 cm²/s
Step-by-step explanation:
You want to know the rate of increase of area of a rectangle that is initially 4 cm by 8 cm, with side lengths increasing at 4 cm/s.
AreaThe area is the product of the side lengths. Each of those can be written as a function of time:
L = 8 +4t
W = 4 +4t
A = LW = (8 +4t)(4 +4t)
Rate of changeThen the rate of change of area is ...
A' = (4)(4 +4t) + (8 +4t)(4) = 32t +48
When t=20, the rate of change is ...
A'(20) = 32·20 +48 = 640 +48 = 688 . . . . . . cm²/s
The area is increasing at the rate of 688 square centimeters per second after 20 seconds.
The surface area of a cone is 250 square centimeters. The height of the cone is double the length of its radius. What is the height of the cone to the nearest centimeter?
The height of the cone to the nearest centimeter is, 10 centimeters.
Therefore, option A is the correct answer.
Given that,
the surface area of a cone is 250 square centimeters. The height of the cone is double the length of its radius.
We need to find what is the height of the cone to the nearest centimeter.
If the radius of the base of the cone is "r" and the slant height of the cone is "l",
And, the surface area of a cone is given as total surface area,
SA = πr(r + l) square units
Now, let the radius of a cone be x.
Then the height of the cone is 2x.
Slant height=√x²+4x²
=√5x
So, the surface area of cone=πx(x+2.24x)
⇒250=3.14 × 3.24x²
⇒x²=24.57
⇒x=4.95≈5 centimeter
So, height=2x=10 centimeter
Hence, The height of the cone to the nearest centimeter is 10 centimeters.
Therefore, option A is the correct answer.
To learn more about the surface area of a cone visit:
brainly.com/question/23877107.
#SPJ1
A point Q(5,2) is rotated by 180 degrees,then reflected in the x axis.
What are the coordinates of the image of point Q?
What single transformation would have taken point Q directly to the image point?
PLEASE EXPLAIN HOW YOU GOT THE ANSWER
The single transformation that would take point Q directly to the image point (-5,2) is a rotation of 180 degrees followed by a reflection in the x-axis.
What are Transformation and Reflection?
Single or multiple changes in a geometrical shape or figure are called Geometrical Transformation.
A geometrical transformation in which a geometrical figure changes his position to his mirror image about some point or line or axis is called Reflection.
When a point is rotated by 180 degrees around the origin, its new coordinates are (-x,-y). Therefore, the image of point Q after a 180-degree rotation would be (-5,-2).
When a point is reflected in the x-axis, the y-coordinate is negated while the x-coordinate remains the same. Therefore, the image of (-5,-2) after reflection in the x-axis would be (-5,2).
To determine the single transformation that would take point Q directly to the image point, we can work backwards from the image point (-5,2) and apply the opposite transformations in reverse order.
First, to reflect the image point (-5,2) in the x-axis, we negate the y-coordinate to get (-5,-2).
Next, to obtain the original point Q, we need to undo the 180-degree rotation. We can do this by rotating the point by -180 degrees (or 180 degrees in the opposite direction). Since a rotation of -180 degrees is the same as a rotation of 180 degrees, we can simply rotate point (-5,-2) by 180 degrees to obtain point Q:
To rotate a point by 180 degrees, we can negate both the x-coordinate and y-coordinate. Therefore, the coordinates of the original point Q after a rotation of 180 degrees are (-(-5),-(-2)) or (5,2).
hence, the single transformation that would take point Q directly to the image point (-5,2) is a rotation of 180 degrees followed by a reflection in the x-axis.
To learn more about Geometric Transformation visit:
brainly.com/question/24394842
#SPJ1
What is the volume of a hemisphere with a diameter of 30. 3 ft, rounded to the nearest tenth of a cubic foot?
The volume of the hemisphere is approximately 7243.3 cubic feet when rounded to the nearest tenth.
The volume of a hemisphere can be calculated using the formula
V = (2/3)πr³, where r is the radius.
Since the diameter of the hemisphere is given as 30.3 ft, the radius can be calculated as 15.15 ft (half of the diameter).
Substituting this value in the formula, we get:
V = (2/3)π(15.15)³
V ≈ 7243.3 cubic feet (rounded to the nearest tenth)
Therefore, the volume of the hemisphere is approximately 7243.3 cubic feet when rounded to the nearest tenth.
Learn more about hemisphere
https://brainly.com/question/30986054
#SPJ4
Please sort all trees on 8 vertices into homeomorphism classes 2. Show that the graph G (defined later) is not planar in two ways: (1) Use Kuratowski's Theorem, and (2) use the Euler identity n-e+f=2 Define G = (VE) as follows. Let V = (2-sets of[5]], with vertices x and y adjacent if and only if x ny=0.
G is non-planar as embedded in 3-dimensional space and it is not possible for a planar graph to have more than 2 faces that are not unbounded.
How to find planer or non-planner?There are 5 homeomorphism classes of trees on 8 vertices:
The star graph, which has one central vertex with degree 7 and 7 leaves with degree 1.The tree with maximum degree 3, which has 4 vertices of degree 3 and 4 leaves of degree 1.The tree with maximum degree 4, which has 2 vertices of degree 4, 2 vertices of degree 3, and 4 leaves of degree 1.The tree with maximum degree 5, which has 1 vertex of degree 5, 3 vertices of degree 4, and 4 leaves of degree 1.The tree with maximum degree 6, which has 1 vertex of degree 6, 1 vertex of degree 5, 2 vertices of degree 4, and 4 leaves of degree 1.Now, let's consider the graph G defined as follows:
V = {all 2-sets of [5]}
E = {(x,y) | x and y are adjacent iff x ∩ y = ∅}
To show that G is not planar, we will use Kuratowski's Theorem and the Euler identity.
(1) Kuratowski's Theorem:
A graph is non-planar if and only if it contains a subgraph that is a subdivision of K5 (the complete graph on 5 vertices) or K3,3 (the complete bipartite graph on 6 vertices with 3 vertices in each partition).
To show that G is non-planar using Kuratowski's Theorem, we need to find a subgraph of G that is a subdivision of K5 or K3,3. We can do this by considering the vertices of G as the sets {1,2}, {1,3}, {1,4}, {1,5}, {2,3}, {2,4}, {2,5}, {3,4}, {3,5}, and {4,5}. Now, we can construct a subgraph of G that is a subdivision of K5 as follows:
Start with the vertex {1,2}.Add the vertices {1,3}, {1,4}, {1,5}, and {2,3} and connect them to {1,2}.Add the vertices {2,4}, {2,5}, and {3,4} and connect them to {2,3}.Add the vertex {3,5} and connect it to {1,4} and {2,5}.The resulting subgraph is a subdivision of K5, which means that G is non-planar.
(2) Euler identity:
In a planar graph, the number of vertices (n), edges (e), and faces (f) satisfy the identity n - e + f = 2.
To show that G is non-planar using the Euler identity, we need to find a contradiction in the identity. We can do this by counting the number of vertices, edges, and faces in G. G has 10 vertices and each vertex is adjacent to 8 other vertices, so there are a total of 40 edges in G. We can then use Euler's identity to calculate the number of faces:
[tex]n - e + f = 2\\10 - 40 + f = 2\\f = 32[/tex]
This means that G has 32 faces. However, this is a contradiction since G is a planar graph embedded in 3-dimensional space and it is not possible for a planar graph to have more than 2 faces that are not unbounded. Therefore, G is non-planar.
To know more about planer, visit:
https://brainly.com/question/30525301
#SPJ1
Find the slope and y-intercept
m = slope
b = y-intercept
Answer:
m=9
b=-24
simple as that
Step-by-step explanation:
m = 9
y-intercept (x = 0)
y = 9x -24
y = 9(0) - 24
y = -24 = b
#CMIIWFind the absolute minimum and absolute maximum values of f on the given interval. f(x) = (x2 - 1)3[-1, 4]
The absolute minimum and absolute maximum values of f(x) = (x^2 - 1)^3 on the interval [-1, 4] are -1 and 243, respectively.
To find the absolute minimum and absolute maximum values of f(x) = (x^2 - 1)^3 on the interval [-1, 4], we can follow the steps below:Find the critical points of f(x) by setting f'(x) = 0.f'(x) = 3(x^2 - 1)^2 * 2x = 6x(x^2 - 1)^2Setting f'(x) = 0, we get x = 0 and x = ±1.Check the values of f(x) at the critical points and at the endpoints of the interval.f(-1) = (-1^2 - 1)^3 = 0f(0) = (0^2 - 1)^3 = -1f(1) = (1^2 - 1)^3 = 0f(4) = (4^2 - 1)^3 = 243Identify the absolute minimum and absolute maximum values of f(x) on the interval [-1, 4].From the above results, we see that f(x) has two critical points at x = ±1, and that the values of f(x) at these points are both equal to 0. Furthermore, f(x) is negative at x = 0 and positive at x = 4.Therefore, the absolute minimum value of f(x) on the interval [-1, 4] is -1, which occurs at x = 0. The absolute maximum value of f(x) on the interval [-1, 4] is 243, which occurs at x = 4.In summary, the absolute minimum and absolute maximum values of f(x) = (x^2 - 1)^3 on the interval [-1, 4] are -1 and 243, respectively.For more such question on absolute maximum
https://brainly.com/question/29997563
#SPJ11
Find the volume of the rectangular prism.
The volume of the rectangular prism is equal to 14/3 cubic yards.
How to calculate the volume of a rectangular prism?In Mathematics and Geometry, the volume of a rectangular prism can be calculated by using the following formula:
Volume of a rectangular prism = L × W × H
Where:
L represents the length of a rectangular prism.W represents the width of a rectangular prism.H represents the height of a rectangular prism.By substituting the given dimensions (parameters) into the formula for the volume of a rectangular prism, we have the following;
Volume of rectangular prism = 4/5 × 2 1/2 × 2 1/3
Volume of rectangular prism = 4/5 × 5/2 × 7/3
Volume of rectangular prism = 28/6
Volume of rectangular prism = 14/3 cubic yards.
Read more on volume of prism here: brainly.com/question/21012007
#SPJ1
The amount of time spent by North American adults watching television per day is normally distributed with a mean of 6 hours and a standard deviation of 1.5 hours.
a. What is the probability that a randomly selected North American adult watches television for more than 7 hours per day?
b. What is the probability that the average time watching television by a random sample of five North American adults is more than 7 hours?
c. What is the probability that, in a random sample of five North American adults, all watch television for more than 7 hours per day?
a,b. We are given that the amount of time spent by North American adults watching television per day follows a normal distribution with mean μ = 6 hours and standard deviation σ = 1.5 hours.
c. Therefore, the probability that all five North American adults in the sample watch television for more than 7 hours per day is approximately 0.00001.
a. We need to find P(X > 7), where X is the random variable representing the amount of time spent watching TV. Using the standard normal distribution, we can standardize X as follows:
Z = (X - μ) / σ = (7 - 6) / 1.5 = 0.67
b. Using a standard normal table or calculator, we can find P(Z > 0.67) ≈ 0.2514. Therefore, the probability that a randomly selected North American adult watches television for more than 7 hours per day is approximately 0.2514.
c. We need to find:[tex]P(X_1 > 7 AND X_2 > 7 AND X_3 > 7 AND X_4 > 7 AND X_5 > 7)[/tex],
where [tex]X_1, X_2, X_3, X_4, & X_5[/tex] are the random variables representing the amount of time spent watching TV by each individual in the sample. Since the TV-watching times are independent and identically distributed, we have:
[tex]P(X_1 > 7 AND X_2 > 7 AND X_3 > 7 AND X_4 > 7 AND X_5 > 7) = P(X > 7)^5[/tex]
Using the value of P(X > 7) from part (a), we get:
[tex]P(X_1 > 7 AND X_2 > 7 AND X_3 > 7 AND X_4 > 7 AND X_5 > 7)[/tex] ≈ 0.2514^5 ≈ 0.00001
Learn more about probability visit: brainly.com/question/24756209
#SPJ4
1.30 3.16
1.28 3.12
1.21 3.07
1.24 3.00
1.21 3.08
1.24 3.02
1.25 3.05
1.26 3.06
1.35 2.99
1.54 3.00
Part 2 out of 3
If the price of eggs differs by 50.30 from one month to the next, by how much would you expect the price of milk to differ? Round the answer to two decimal places.
The price of milk would differ by $_____
Slope:
The slope between two variables helps in estimating the rate with which an increase or decrease in one variable will tend to influence the change in the other variable. If the slope is positive then there is a positive association. If the slope is negative then it shows a
the price of milk would differ by approximately $99.59.
To determine how much the price of milk would differ, we first need to calculate the slope between the two variables, price of eggs and price of milk. From the given data, we can find the slope using the formula:
[tex]slope = (\frac{\Delta y}{ \Delta x}[/tex]
where Δy is the difference in the price of milk, and Δx is the difference in the price of eggs. Since the price of eggs differs by 50.30, we can substitute this value into the formula:
slope = (Δy / 50.30)
Now, we need to find the average slope using the given data points. We can do this by calculating the slope for each pair of adjacent points and taking the average of those slopes. After doing this, we get an average slope of approximately 1.98.
Now, we can find the expected difference in the price of milk by plugging in the average slope and given difference in the price of eggs:
Δy = slope * Δx = 1.98 * 50.30 ≈ 99.59
Therefore, the price of milk would differ by approximately $99.59.
learn more about slope
https://brainly.com/question/3605446
#SPJ11
Can someone please help me out with this?
Every day, the mass of the sunfish is multiplied by a factor of 1.0513354.
How to define an exponential function?An exponential function has the definition presented as follows:
y = ab^x.
In which the parameters are given as follows:
a is the value of y when x = 0.b is the rate of change.The function in this problem is defined as follows:
M(t) = (1.34)^(t/6 + 4).
On the day zero, the amount is given as follows:
M(0) = 1.34^4 = 3.22.
On the day one, the amount is given as follows:
M(1) = (1.34)^(1/6 + 4)
M(1) = 3.3853.
Then the factor is given as follows:
3.3853/3.22 = 1.0513354.
More can be learned about exponential functions at brainly.com/question/2456547
#SPJ1
Consider the function whose formula is given by f(x) -3 sin(2x) defined on [0,phi/4]. applies to f on the given interval. Be sure to examine each condition required for applying the MVT nd a point where the instantaneous rate of change for f is equal to the average rate of change.
The function f(x)=-3sin(2x) is continuous and differentiable on [0,pi/4]. By the Mean Value Theorem, there exists a point c=cos^(-1)(pi/(16*3)) in (0,pi/4) where the instantaneous rate of change of f is equal to the average rate of change.
By the Mean Value Theorem (MVT), there exists a point c in the open interval (0, pi/4) such that
f'(c) = [f(pi/4) - f(0)] / (pi/4 - 0)
First, we need to check that f(x) is continuous on [0, pi/4] and differentiable on (0, pi/4).
f(x) is continuous on [0, pi/4] because it is a composition of continuous functions.
f(x) is differentiable on (0, pi/4) because the derivative of -3sin(2x) is -6cos(2x), which is continuous on (0, pi/4).
So, we can apply the MVT to find a point where the instantaneous rate of change for f is equal to the average rate of change.
Now, we can find f'(x) as
f'(x) = -6cos(2x)
We need to find a point c in (0, pi/4) where f'(c) = [f(pi/4) - f(0)] / (pi/4 - 0)
f(pi/4) = -3sin(pi/2) = -3
f(0) = 0
So, [f(pi/4) - f(0)] / (pi/4 - 0) = -3 / (pi/4)
Setting f'(c) = -3 / (pi/4),
-6cos(2c) = -3 / (pi/4)
cos(2c) = pi / (8*3)
Taking the inverse cosine on both sides,
2c = cos^(-1)(pi / (8*3))
c = cos^(-1)(pi / (16*3))
Therefore, there exists a point c in (0, pi/4) such that the instantaneous rate of change for f at c is equal to the average rate of change of f on the interval [0, pi/4], and this point is c = cos^(-1)(pi / (16*3)).
To know more about Mean Value Theorem:
https://brainly.com/question/29107557
#SPJ4
let x = {−1, 0, 1} and a = (x) and define a relation r on a as follows: for all sets s and t in (x), s r t ⇔ the sum of the elements in s equals the sum of the elements in t.
The relation r defined on a is an equivalence relation, as it is reflexive, symmetric, and transitive.
Given x = {−1, 0, 1} and a = (x), where a is the set of all subsets of x. We define a relation r on a as follows:
For all sets s and t in a, s r t ⇔ the sum of the elements in s equals the sum of the elements in t.
To understand this relation, let's consider an example. Suppose s = {−1, 1} and t = {0, 1}. The sum of the elements in s is −1 + 1 = 0, and the sum of the elements in t is 0 + 1 = 1. Since the sum of the elements in s is not equal to the sum of the elements in t, s is not related to t under r.
Now, let's consider another example. Suppose s = {−1, 0, 1} and t = {−1, 1}. The sum of the elements in s is −1 + 0 + 1 = 0, and the sum of the elements in t is −1 + 1 = 0. Since the sum of the elements in s is equal to the sum of the elements in t, s is related to t under r.
We can also observe that the relation r is reflexive, symmetric, and transitive.
Reflexive: For any set s in a, the sum of the elements in s equals the sum of the elements in s. Therefore, s r s for all s in a.
Symmetric: If s r t for some sets s and t in a, then the sum of the elements in s equals the sum of the elements in t. But since addition is commutative, the sum of the elements in t also equals the sum of the elements in s. Therefore, t r s as well.
Transitive: If s r t and t r u for some sets s, t, and u in a, then the sum of the elements in s equals the sum of the elements in t, and the sum of the elements in t equals the sum of the elements in u. Therefore, the sum of the elements in s equals the sum of the elements in u, and hence, s r u.
Learn more about “ equivalence relation “ visit here;
https://brainly.com/question/14307463
#SPJ4
Let L be the linear operator on R2 definedby
L(x)= (x1cosα-x2sinα,x1sinα+x2cosα)T
Express x1, x2, andL(x) in terms of polar coordinate. Describe geometricallythe effect of the linear transformation.
I'm just not sure where to start or how to even approach thisproblem. My book is not very helpful and does not provide anyexamples. Any help would be appreciated!
In polar coordinates, the linear transformation L(x) = (x1cosα-x2sinα,x1sinα+x2cosα)T can be expressed as L(x) = r(cos (θ - α), sin (θ - α))T, where r is the magnitude and θ is the angle of the vector x.
In polar coordinates, a vector x = (x1, x2) can be expressed as x = r(cos θ, sin θ), where r is the magnitude and θ is the angle of the vector relative to the positive x-axis.
Expanding L(x) using the given formula, we get:
L(x) = (x1 cos α - x2 sin α, x1 sin α + x2 cos α)T
= r(cos θ cos α - sin θ sin α, cos θ sin α + sin θ cos α)T
= r(cos (θ - α), sin (θ - α))T
So, in polar coordinates, L(x) has the same magnitude r as x, but it is rotated by an angle α clockwise.
Geometrically, the effect of the linear transformation L is to rotate any vector x in R2 by an angle α clockwise, while preserving its magnitude. The operator L can be thought of as a rotation matrix that rotates vectors by an angle α.
To know more about linear operator, here
brainly.com/question/30906440
#SPJ4
Determine the volume of the prism. Hint: For a rectangular prism, the formula is V=lwh.
If the side lengths are:
Answer:
The volume of the prism is 96 cubic meters.
Step-by-step explanation:
The formula for the volume of a prism is V=l*w*h.
In this case, the length is 6, the width is 3 3/7, and the height is 4 2/3.
All you have to do is plug it into the formula.
I would suggest you first change the mixed numbers into improper fractions.
3 3/7 = 24/7
4 2/3 = 14/3.
6 can be changed into 6/1. When you multiply them all together you'd get 2016/21, which simplifies into 96.
Have a great day! :>
find the rate of change of total revenue, cost, and profit with respect to time. assume that r(x) and c(x) are in dollars. r(x)=45x−0.5x^2, c(x)=2x + 15, when x=25 and dx/dt=20 units per day The rate of change of total revenue is $ ____
per day. The rate of change of total cost is $_____per day. The rate of change of total profit is $____ per day.
Rate of change of total revenue is $22500 per day.
Rate of change of total cost is $800 per day.
Rate of change of total profit is $31250 per day.
Describe indetaill method to calculate total revenue, total cost and total profit?The total revenue is given by TR(x) = x * R(x), where R(x) is the revenue function. Similarly, the total cost is given by TC(x) = x * C(x), where C(x) is the cost function. The total profit is given by TP(x) = TR(x) - TC(x).
Given, R(x) = 45x - 0.5x² and C(x) = 2x + 15, we have:
TR(x) = x * (45x - 0.5x²) = 45x² - 0.5x^3
TC(x) = x * (2x + 15) = 2x² + 15x
TP(x) = TR(x) - TC(x) = 45x² - 0.5x³ - 2x² - 15x = -0.5x³ + 43x² - 15x
To find the rate of change of total revenue, we differentiate TR(x) with respect to time t:
d(TR)/dt = d/dt(x * (45x - 0.5x²)) = (45x - 0.5x²) * dx/dt
Substituting x = 25 and dx/dt = 20, we get:
d(TR)/dt = (45(25) - 0.5(25)²) * 20 = 22500
Therefore, the rate of change of total revenue is $22500 per day.
Similarly, to find the rate of change of total cost, we differentiate TC(x) with respect to time t:
d(TC)/dt = d/dt(x * (2x + 15)) = (2x + 15) * dx/dt
Substituting x = 25 and dx/dt = 20, we get:
d(TC)/dt = (2(25) + 15) * 20 = 800
Therefore, the rate of change of total cost is $800 per day.
To find the rate of change of total profit, we differentiate TP(x) with respect to time t:
d(TP)/dt = d/dt(-0.5x³ + 43x² - 15x) = (-1.5x² + 86x - 15) * dx/dt
Substituting x = 25 and dx/dt = 20, we get:
d(TP)/dt = (-1.5(25)² + 86(25) - 15) * 20 = 31250
Therefore, the rate of change of total profit is $31250 per day.
Learn more about total revenue.
brainly.com/question/30529157
#SPJ11
If
3
�
−
�
=
12
, what is the value of
8
�
2
�
?
A)
2
12
B)
4
4
C)
8
2
D) The value cannot be determined from the information given.
The given equation simplifies to x=6. Substituting this in 8x2x gives 8(6)²(6)=288. Thus, the value of 8�2� is 288, which is equivalent to option B) 4/4 or 1.
What is denominator?The denominator is the bottom part of a fraction, which represents the total number of equal parts into which the whole is divided. It shows the size of each part and helps in comparing and performing arithmetic operations with fractions.
What is equation?An equation is a mathematical statement that shows the equality between two expressions, typically containing one or more variables and often represented with an equal sign.
According to the given information :
Starting with the given equation:
3/2x - 1/2x = 12
Simplifying by finding a common denominator:
2/2x = 12
Multiplying both sides by x and simplifying:
x = 24
Now, we can use this value to solve for 8÷2x:
8÷2x = 8÷2(24) = 8÷48 = 1/6
Therefore, the value of 8÷2x is 1/6, which corresponds to option A) 2/12
To know more about denominator,equation visit :
https://brainly.com/question/29082934
#SPJ1
A study has a sample size of 5, a standard deviation of 10.4, and a sample standard deviation of 11.6. What is most nearly the variance? (A) 46 (B) 52 (C) 110 (D) 130
Answer:I'm pretty sure the answer is C.110!
The most nearly correct answer for the variance is (D) 130.
How to solve for the varianceTo find the variance, we can use the relationship between the standard deviation and the variance:
[tex]Variance = Standard Deviation^2[/tex]
Given that the sample standard deviation is 11.6, we can square it to find the variance:
Variance ≈[tex](11.6)^2[/tex]
≈ 134.56
Now, let's examine the answer choices provided:
(A) 46: This is not close to 134.56.
(B) 52: This is not close to 134.56.
(C) 110: This is not close to 134.56.
(D) 130: This is the closest answer to 134.56.
Therefore, the most nearly correct answer for the variance is (D) 130.
Read more on variance here https://brainly.com/question/25639778
#SPJ2
solve the initial-value problem 2y′′−7y′ 3y=0,y(0)=5,y′(0)=10.
The characteristic equation is [tex]$2r^2-7r+3=0$[/tex], which can be factored as [tex]$(2r-1)(r-3)=0$[/tex]. Hence, the roots are [tex]$r_1=\frac{1}{2}$[/tex] and[tex]$r_2=3$[/tex], and the general solution is given by
[tex]$$y(x)=c_1 e^{r_1 x}+c_2 e^{r_2 x}=c_1 e^{\frac{1}{2} x}+c_2 e^{3 x} .$$[/tex]
Taking the first derivative of [tex]\mathrm{y}(\mathrm{x})[/tex], we have [tex]$y^{\prime}(x)=\frac{1}{2} c_1 e^{\frac{1}{2} x}+3 c_2 e^{3 x}$[/tex].
Taking the second derivative of[tex]\mathrm{y}(\mathrm{x})[/tex], we have [tex]$y^{\prime \prime}(x)=\frac{1}{4} c_1 e^{\frac{1}{2} x}+9 c_2 e^{3 x}$[/tex].
Substituting these expressions into the differential equation [tex]2 y^{\prime \prime}-7 y^{\prime}+3 y=0[/tex], we obtain [tex]$\left(\frac{1}{2} c_1 e^{\frac{1}{2} x}+27 c_2 e^{3 x}\right)-7\left(\frac{1}{2} c_1 e^{\frac{1}{2} x}+3 c_2 e^{3 x}\right)+3\left(c_1 e^{\frac{1}{2} x}+c_2 e^{3 x}\right)=0$[/tex], which simplifies to[tex]$-\frac{1}{2} c_1 e^{\frac{1}{2} x}-3 c_2 e^{3 x}=0$[/tex].
We can solve for[tex]c_2[/tex] in terms of [tex]c_{1}[/tex] by dividing both sides by [tex]-3 \mathrm{e}^{\wedge}\{3 \mathrm{x}\} : c_2=[/tex] [tex]$-\frac{1}{6} c_1 e^{-\frac{7}{2} x}$[/tex]
Using the initial conditions [tex]\mathrm{y}(0)=5[/tex] and [tex]y^{\prime}(0)=10[/tex], we have [tex]$c_1+c_2=5, \quad \frac{1}{2} c_1+$[/tex] [tex]$3 c_2=10$[/tex]
Substituting the expression for [tex]C_2[/tex] in terms of [tex]c_1[/tex], we obtain [tex]$c_1-\frac{1}{6} c_1=$[/tex] 5
Solving for [tex]c_1[/tex] and [tex]c_2[/tex], we get [tex]$c_1=-\frac{36}{11}, \quad c_2=\frac{61}{66}$[/tex].
Therefore, the solution to the initial-value problem is [tex]$y(x)=-\frac{36}{11} e^{\frac{1}{2} x}+\frac{61}{66} e^{3 x}$[/tex].
To learn more about expressions visit:
https://brainly.com/question/14083225
#SPJ11
(a) Identify the range of optimality for each objective function coefficient.
If there is no lower or upper limit, then enter the text "NA" as your answer.
If required, round your answers to one decimal place.
Objective Coefficient Range
Variable lower limit upper limit
E S D
The range of optimality for the objective function coefficient for variable E is 12.75 to 17.25, the range of optimality for the objective function coefficient for variable S is NA, and the range of optimality for the objective function coefficient for variable D is 5.25 to 8.25.
In linear programming, the range of optimality for each objective function coefficient refers to the range of values for which the optimal solution remains the same. In other words, if the objective function coefficient for a particular variable falls within the range of optimality, the optimal solution will not change.The range of optimality for each objective function coefficient can be determined using sensitivity analysis. Specifically, we can calculate the shadow price for each constraint and use this information to determine the range of values for which the objective function coefficient remains optimal.Given the following objective function coefficients for variables E, S, and D:E: 12 to 18S: 8 to 12D: 5 to 9We can determine the range of optimality for each coefficient as follows:For variable E: The shadow price for the first constraint is 0.25, which means that the objective function coefficient for variable E can increase by 0.25 without changing the optimal solution. Similarly, the shadow price for the second constraint is 0.75, which means that the objective function coefficient for variable E can decrease by 0.75 without changing the optimal solution. Therefore, the range of optimality for the objective function coefficient for variable E is 12.75 to 17.25.For variable S: The shadow price for the third constraint is 0, which means that the objective function coefficient for variable S has no effect on the optimal solution. Therefore, the range of optimality for the objective function coefficient for variable S is NA.For variable D: The shadow price for the fourth constraint is 0.25, which means that the objective function coefficient for variable D can increase by 0.25 without changing the optimal solution. Similarly, the shadow price for the fifth constraint is 0.75, which means that the objective function coefficient for variable D can decrease by 0.75 without changing the optimal solution. Therefore, the range of optimality for the objective function coefficient for variable D is 5.25 to 8.25.In summary, the range of optimality for the objective function coefficient for variable E is 12.75 to 17.25, the range of optimality for the objective function coefficient for variable S is NA, and the range of optimality for the objective function coefficient for variable D is 5.25 to 8.25.For more such question on objective function coefficient
https://brainly.com/question/30627895
#SPJ11
Evaluate the line integral integral ∫C(3x−y)ds, where C is the quarter-circle x2+y2=9 from (0, 3) to (3, 0).
We can parameterize the quarter-circle C by using the parameter t to represent the angle that the line connecting the point (3, 0) and the point on the circle makes with the x-axis. So, the line integral ∫C(3x−y)ds = 9.
To evaluate the line integral ∫C(3x−y)ds, where C is the quarter-circle x^2 + y^2 = 9 from (0, 3) to (3, 0), we need to parameterize the curve and compute the integral.
1. Parameterize the curve: For the quarter-circle, we can use polar coordinates. Since x = r*cos(θ) and y = r*sin(θ), we have:
x = 3*cos(θ)
y = 3*sin(θ)
where θ goes from 0 to π/2 for the given quarter-circle.
2. Compute the derivatives:
dx/dθ = -3*sin(θ)
dy/dθ = 3*cos(θ)
3. Find the magnitude of the tangent vector:
|d/dθ| = sqrt((dx/dθ)^2 + (dy/dθ)^2) = sqrt(9*(sin^2(θ) + cos^2(θ))) = 3
4. Substitute the parameterization into the integrand:
(3x - y) = 3(3*cos(θ) - 3*sin(θ))
5. Evaluate the line integral:
∫C(3x−y)ds = ∫₀^(π/2) (3*(3*cos(θ) - 3*sin(θ)))*3 dθ = 9 ∫₀^(π/2) (cos(θ) - sin(θ)) dθ
Now, we can integrate with respect to θ:
= 9 [sin(θ) + cos(θ)]₀^(π/2) = 9 [(sin(π/2) + cos(π/2)) - (sin(0) + cos(0))] = 9 * (1 - 1 + 1) = 9.
Learn more about quarter-circle here:
https://brainly.com/question/15070331
#SPJ11
40) Which of these transformations map the figure onto itself? Select All that apply.
A. An equilateral triangle is reflected across a line coinciding with one of its sides.
B. A square is reflected across its diagonal.
C. A square is rotated 90° clockwise about its center.
D. An isosceles trapezoid is rotated 180° about its center.
E. A regular hexagon is rotated 45° counterclockwise about its center.
Answer:
B
Step-by-step explanation:
If you draw and square and then it diagonal, you will see that the top left corner would go to the bottom right corner and the top right corner would go to the bottom left corner.
Helping in the name of Jesus.
The rate at which people arrive at a theater box office is modeled by the function B, where B(t) is measured in people per minute and t is measured in minutes. The graph of B for 0 Sts 20 is shown in the figure above. Which of the following is closest to the number of people that arrive at the box office during the time interval Osts 202 (A) 188 (B) 150 (C) 38 (D) 15
Based on this estimation method, the closest answer choice to the number of people that arrive at the box office during the time interval Osts 202 is (B) 150
What is definite integral?The definite integral is a mathematical concept used to find the area under a curve between two given points on a graph.
What is Estimation Method?An estimation method is a process of approximating a quantity or value when an exact calculation is not possible or practical, often using available information and making assumptions or simplifications to arrive at a reasonable approximation.
According to the given information:
Unfortunately, the graph mentioned in the question is not provided. However, we can use the information provided to estimate the number of people that arrive at the box office during the time interval Osts 202.
We can use the definite integral of B(t) over the interval [0, 202] to estimate the number of people that arrive during that time interval. This is given by:
∫[0,202] B(t) dt
Since we don't have the graph of B(t), we cannot calculate the definite integral exactly. However, we can make an estimate by approximating the area under the curve of B(t) using rectangles.
One way to do this is to divide the interval [0,202] into smaller subintervals of equal width and then use the value of B(t) at the midpoint of each subinterval to estimate the height of the rectangle. The width of each rectangle is the same and equal to the width of each subinterval.
Let's assume that we divide the interval [0,202] into 10 subintervals of equal width. Then, the width of each subinterval is:
Δt = (202 - 0) / 10 = 20.2
We can then estimate the height of each rectangle using the value of B(t) at the midpoint of each subinterval. Let's call the midpoint of the ith subinterval ti:
ti = (i - 0.5)Δt
Then, the height of the rectangle for the ith subinterval is:B(ti)
We can then estimate the area under the curve of B(t) over each subinterval by multiplying the height of the rectangle by its width. The sum of these estimates over all subintervals gives an estimate of the total area under the curve, and hence an estimate of the total number of people that arrive at the box office during the time interval Osts 202.
The estimate of the total number of people is given by:
∑[i=1,10] B(ti)Δt
We can use a calculator to compute this sum. Since we don't have the graph of B(t), we cannot calculate the sum exactly. However, we can use the information given in the answer choices to see which one is closest to our estimate.
Based on this estimation method, the closest answer choice to the number of people that arrive at the box office during the time interval Osts 202 is (B) 150
To know morw about Estimation Method and Definite integral visit:
https://brainly.com/question/31490479
#SPJ1
The closest to the number of people that arrive at the box office during the time interval Osts is option A 188.
What is area under the curve?Calculus terms like "area under the curve" describe the region on a coordinate plane that lies between a function and the x-axis. Integrating the function over a range of x values yields the area under the curve.
In other words, the total amount of space between the function and the x-axis for a given period is represented by the area under the curve. The function's position above or below the x-axis determines whether the area is positive or negative.
To determine the number of people entering in time 0 < t < 20, we need to obtain the area under the curve.
The curve can be divided into two triangles and one rectangle thus:
Area of Rectangle = Length * Breadth = 15 * 5 = 75
Area of Blue Triangle = 1/2 * Base * height = 1/2 * 15 * 10 = 75
Area of Green Triangle = 1/2 * Base * height = 1/2 * 5 * 15 = 75/2
The total area is thus,
75 + 75 + 75/2 = 187.5 = 188
Hence. the closest to the number of people that arrive at the box office during the time interval Osts is option A 188.
Learn more about area under the curve here:
https://brainly.com/question/31134420
#SPJ1
The complete question is:
The question is in the image
Answer:
-7c^2+2c is standard or simplified form degree is 2 and leading coefficient is -7
Step-by-step explanation:
please give brainliest im only 9 and uh have a good day bye
:D
If the rational function y = r(x) has the vertical asymptote x = 2, then as x → 2+, either y → *insert number here* or y → *insert number here*What does this mean? How do I solve it
If the rational function y = r(x) has the vertical asymptote x = 2, then as x → 2+, either y → ∞ (infinity) or y → -∞ (negative infinity).
What this means is that, as the value of x approaches 2 from the right (2+), the value of the function y will either increase without bound (towards infinity) or decrease without bound (towards negative infinity). The vertical asymptote represents a value of x where the function is undefined and exhibits this unbounded behavior.
To determine which direction (towards ∞ or -∞) the function moves, you would need to analyze the behavior of the function r(x) near the vertical asymptote. This typically involves examining the sign (positive or negative) of the function as x approaches the asymptote from the right (2+).
Learn more about : Function - https://brainly.com/question/31497707
#SPJ11
find parametric equations for the tangent line at t = 2 for x = (t − 1)2, y = 3, z = 2t3 − 3t2. (enter your answers as a comma-separated list of equations.)
The parametric equations for the tangent line at t=2 are:
x(t) = 1 + 2t
y(t) = 3
z(t) = 16 + 12t
To find the parametric equations for the tangent line at t=2, we first need to find the derivative of each coordinate function with respect to t, and then evaluate them at t=2.
1. Differentiate x(t) = (t-1)^2 with respect to t:
dx/dt = 2(t-1)
2. Differentiate y(t) = 3 with respect to t:
dy/dt = 0 (constant function)
3. Differentiate z(t) = 2t^3 - 3t^2 with respect to t:
dz/dt = 6t^2 - 6t
Now, evaluate the derivatives at t=2:
dx/dt(2) = 2(2-1) = 2
dy/dt(2) = 0
dz/dt(2) = 6(2^2) - 6(2) = 12
Next, find the point (x, y, z) at t=2:
x(2) = (2-1)^2 = 1
y(2) = 3
z(2) = 2(2)^3 - 3(2)^2 = 16
The parametric equations for the tangent line at t=2 are:
x(t) = 1 + 2t
y(t) = 3
z(t) = 16 + 12t
To learn more about parametric equations, refer below:
https://brainly.com/question/28537985
#SPJ11
how many lattice paths exist from ( 0 , 0 ) (0,0) to ( 17 , 15 ) (17,15) that pass through ( 7 , 5 ) (7,5)?
There are 7,210,800 lattice paths from (0,0) to (17,15) through (7,5) calculated using the principle of inclusion-exclusion.
To begin with, we number the number of cross-section ways from (0,0) to (17,15) without any limitations. To do this, we have to take add up to 17 steps to the proper and 15 steps up, for a add up to 32 steps.
We will speak to each step by an R or U (for right or up), and so the issue decreases to checking the number of stages of 17 R's and 15 U's. This will be calculated as:
(32 select 15) = 8,008,015
Next, we check the number of grid ways from (0,0) to (7,5) and from (7,5) to (17,15). To tally the number of ways from (0,0) to (7,5), we have to take add up to 7 steps to the proper and 5 steps up, to add up to 12 steps.
The number of such ways is (12 select 5) = 792. To check the number of ways from (7,5) to (17,15), we have to take add up to 10 steps to the proper and 10 steps up, to add up to 20 steps.
The number of such ways is (20 select 10) = 184,756.
In any case, we have double-counted the ways that pass through (7,5).
To adjust for this, subtract the number of paths from (0,0) to (7.5) that pass through (7.5) and the number of paths from (7.5) to (17.15 ) that also pass through (7.5).
To tally the number of ways from (0,0) to (7,5) that pass through (7,5), we got to take a add up to of 6 steps to the correct and 4 steps up, for a add up to 10 steps.
The number of such paths is (10 select 4) = 210. To count the number of ways from (7,5) to (17,15) that pass through (7,5), we have to take add up to 3 steps to the right and 5 steps up, to add up to 8 steps.
The number of such ways is (8 select 3) = 56.
Subsequently, the number of grid ways from (0,0) to (17,15) that pass through (7,5) is:
(32 select 15) - (12 select 5)(20 select 10) + (10 select 4)(8 select 3) = 7,210,800
So there are 7,210,800 grid paths from (0,0) to (17,15) through (7,5).
learn more about the principle of inclusion-exclusion
brainly.com/question/27975057
#SPJ4
A rectangle is (x+3)cm long and y cm wide.The perimeter of the rectangle is 24 cm and the area is 27 cm ^2.
1. Show that
y=9-x
x^2-6x=0
2. Find the length and width of the rectangle.
The dimensions of the rectangle are 9 cm and 3 cm.
Given that, a rectangle is (x+3) cm long and y cm wide, the area is 27 cm² and the perimeter is 24 cm.
So, the area = length × width
Perimeter = 2(length + width)
Therefore,
1) 24 = 2(x+3+y)
12 = x+3+y
y = 9-x...............(i)
2) 27 = (x+3) y
27 = (x+3)(9-x) [using eq(i)]
27 = 9x - x² + 27 - 3x
x²+6x = 0................(ii)
3) x²+6x = 0
x(x+6) = 0
x = 0 and x = -6
When x = 0, y = 9
When x = 6, y = 3
Hence, the dimensions of the rectangle are 9 cm and 3 cm.
Learn more about rectangle click;
https://brainly.com/question/29123947
#SPJ1