The final velocity of April, the skateboard, and the watermelon after the collision is 0.18 m/s.
What is the final velocity of the system?The final velocity of April, the skateboard, and the watermelon after the collision is calculated by applying the principle of conservation of linear momentum as shown below;
m1u1 + m2u2 = v (m1 + m2)
where;
m1 is mass of Aprilm2 is the mass of the ballu1 is the initial velocity of Aprilv is the final velocity of the system(55 x 0) + (2 x 5) = v (55 + 2)
10 = 57v
v = 10/57
v = 0.18 m/s
Learn more about linear momentum here: https://brainly.com/question/7538238
#SPJ1
Whlch of the following statements about the motion of the two masses Is/are correct? Select all that apply. The linear velocity of mi is the same as the linear velocity of m^(2) The angular velocity of m ls less than the angular velocity of m^(2) The lincar velocity of m s less than the lincar velocity of m^(2) The linear velocity of m is greater than the linear velocity of m^(2) The angular velocity of m is greater than the angular velocity of m^(2) The angular velocity of mi is the same as the angular velocity of m^(2)
Option A is Correct answer. The linear velocity of mi is the same as the linear velocity of m² The angular velocity of m ls less than the angular velocity of m²
The pace at which the angular location of a rotating body changes is referred to as the angular velocity. The rate at which the object's displacement changes over time while it moves in a straight line is referred to as linear velocity.
a) The first statement is correct - the linear velocity of mi is the same as the linear velocity of m², but the second statement is incorrect - the angular velocity of m is less than the angular velocity of m².
b) The first statement is incorrect - the linear velocity of m is less than the linear velocity of m², but the second statement is correct - the linear velocity of m is greater than the linear velocity of mm².
c) Both statements are incorrect - the angular velocity of m is less than the angular velocity of m², and the angular velocity of mi is not the same as the angular velocity of m².
Learn more about angular velocity here
https://brainly.com/question/20410914
#SPJ11
Option A is Correct answer. The linear velocity of mi is the same as the linear velocity of m² The angular velocity of m ls less than the angular velocity of m²
The pace at which the angular location of a rotating body changes is referred to as the angular velocity. The rate at which the object's displacement changes over time while it moves in a straight line is referred to as linear velocity.
a) The first statement is correct - the linear velocity of mi is the same as the linear velocity of m², but the second statement is incorrect - the angular velocity of m is less than the angular velocity of m².
b) The first statement is incorrect - the linear velocity of m is less than the linear velocity of m², but the second statement is correct - the linear velocity of m is greater than the linear velocity of mm².
c) Both statements are incorrect - the angular velocity of m is less than the angular velocity of m², and the angular velocity of mi is not the same as the angular velocity of m².
Learn more about angular velocity here
https://brainly.com/question/20410914
#SPJ11
a hair breaks under a tension of 1.2 n. what is the diameter of the hair? the tensile strength is 2.2 ✕ 108 pa.
The diameter of the hair is approximately 3.12 micrometers.
To find the diameter of the hair, we can use the formula for tensile strength:
Tensile strength = Force / Area
We know that the tension force is 1.2 N and the tensile strength is 2.2 ✕ 108 Pa. We can rearrange the formula to solve for the area (which will give us the cross-sectional area of the hair):
Area = Force / Tensile strength
Substituting the values we have:
Area = 1.2 N / 2.2 ✕ 108 Pa
Area = 5.45 ✕ 10^-9 m^2
Now, we can use the formula for the area of a circle to find the diameter:
Area = π/4 ✕ diameter^2
Solving for diameter:
diameter = √(4 ✕ Area / π)
Substituting the value we found for the area:
diameter = √(4 ✕ 5.45 ✕ 10^-9 / π)
diameter = 3.12 ✕ 10^-6 m
Therefore, the diameter of the hair is approximately 3.12 micrometers.
To know more about tensile strength click here:
https://brainly.com/question/25748369
#SPJ11
Which statements describe isotopes? Check all that apply.
Isotopes of the same element have the same number of protons.
Isotopes of the same element have the same number of neutrons.
All isotopes are unstable.
Some isotopes are unstable.
Isotopes are identified by their mass number.
Isotopes are identified by their atomic number.
These four statements are correctly describe the isotopes.
Isotopes of the same element have the same number of protons. (True)Isotopes of the same element may have different numbers of neutrons. (True)Some isotopes are unstable. (True)Isotopes are identified by their mass number. (True)Therefore, the statements "Isotopes of the same element have the same number of neutrons," "All isotopes are unstable," and "Isotopes are identified by their atomic number" are incorrect.
What are the isotopes?
Isotopes are variants of an element that have the same number of protons in their atomic nucleus but different numbers of neutrons. Isotopes of an element share the same atomic number, which is the number of protons in the nucleus, but have different atomic masses due to the varying number of neutrons. For example, carbon-12, carbon-13, and carbon-14 are three isotopes of the element carbon, with 6, 7, and 8 neutrons, respectively.
Isotopes occur naturally for many elements, and some isotopes can be artificially created through nuclear reactions. Isotopes have a wide range of applications in fields such as radiometric dating, nuclear power, medical diagnosis and treatment, and materials science.
To know more about isotopes, visit:
https://brainly.com/question/11808418
#SPJ9
Answer:1,4,5
Explanation:
if the wide flange beam is subjected to a shear of v=30 kN, determine the shear force resisted by the web. set w=200 mm.
The shear force resisted by the web of the wide flange beam can be determined by dividing 20 kN by the web thickness (t), which can be calculated based on the specific dimensions and properties of the beam.
To determine the shear force resisted by the web of a wide flange beam subjected to a shear of v=30 kN and with a web width of w=200 mm, we can use the following formula:
V = (2/3) × Fv × t × w
Where:
V = Shear force resisted by the web
Fv = Shear stress in the web
t = Web thickness
First, we need to find the shear stress in the web, which can be calculated using:
Fv = V / (t × w)
Substituting the given values, we get:
Fv = 30 kN / (t × 200 mm)
Next, we can substitute this value of Fv in the first equation to find the shear force resisted by the web:
V = (2/3) × Fv × t × w
V = (2/3) × (30 kN / (t × 200 mm)) × t × 200 mm
Simplifying, we get:
V = (20 kN) / t
Learn More about flange beam here :-
https://brainly.com/question/30035399
#SPJ11
A falling 1-N apple hits ground with a force of about A. 4 N B. 2 N C. 1 N D. 10 N E. need more information
A falling 1-N apple hits ground with a force of about C) 1 N
The force with which an object falls to the ground is determined by its weight, which is equal to its mass multiplied by the acceleration due to gravity. On Earth, the acceleration due to gravity is approximately 9.8 m/s^2. Since the weight of a 1-N apple is 1 N, the force with which it hits the ground would also be approximately 1 N.
Therefore, the correct answer is C. 1 N. However, it's worth noting that this answer assumes the apple is falling freely under the influence of gravity and there are no other forces acting on it, such as air resistance.
In reality, the force with which the apple hits the ground could vary depending on various factors such as height from which it falls, air resistance, and surface on which it falls.
For more questions like Force click the link below:
https://brainly.com/question/13191643
#SPJ11
\A capacitor is constructed of two identical conducting plates parallel to each other and separated by a distance d. The capacitor is charged to a potential difference of Vi by a battery, which is then disconnected. (Remember that a capacitor's job is to store charge!) What is the magnitude of the electric field between the plates? A. Vo/d B.Vo/d C. d/Vo D. Vo/d2
The correct answer for magnitude of electric field between the plates is B. Vo/d
The magnitude of the electric field between the plates of a capacitor is given by the formula E = V/d, where V is the potential difference across the plates and d is the distance between them. In this case, the capacitor is charged to a potential difference of Vi by a battery, so the magnitude of the electric field between the plates is E = Vi/d. Therefore, the correct answer is A. Vi/d.
Hi! To find the magnitude of the electric field between the plates of the capacitor, we can use the formula for electric field (E) in a parallel plate capacitor, which is:
E = V/d
Here, V is the potential difference (Vi) and d is the distance between the plates.
So, the magnitude of the electric field between the plates is:
E = Vi/d
This corresponds to option B in your given choices. Therefore, the correct answer is:
B. Vo/d
Learn more about electric field here:
https://brainly.com/question/15800304
#SPJ11
A 46 g golf ball leaves the tee at a velocity of 94 m/s. It was struck with a force of 2400 N. Assuming that the force was uniform during the impact, how long was the club in contact with the ball (what is the duration of the impact)? a. 0.25 b. 0.02 c. 2s d.002s
The correct option is (d) 0.002 s. The time taken for the club in contact with the ball is 0.02s when it was struck with a force of 2400N.
To answer this question, we can use the equation:
impulse = force × time
Impulse is the change in momentum of the golf ball. Momentum is calculated as mass × velocity. Since the golf ball is initially at rest, the impulse is equal to the final momentum.
First, convert the mass of the golf ball from grams to kilograms: 46 g = 0.046 kg.
Now, calculate the final momentum of the golf ball:
momentum = mass × velocity
momentum = 0.046 kg × 94 m/s
momentum = 4.324 kg·m/s
Next, use the impulse equation to find the time (duration of impact):
impulse = force × time
4.324 kg·m/s = 2400 N × time
Now, solve for the time:
time = 4.324 kg·m/s / 2400 N
time ≈ 0.0018 s
To learn more about velocity click here https://brainly.com/question/17127206
#SPJ11
An airfoil with a characteristic length L=0.2 ft is placed in airflow at p=1 atm and T.=60F with free stream velocity V=150 ft/s and convection heat transfer coefficient h=21 Btu/h-ft2.oF. A second larger airfoil with a characteristic length L=0.4 ft is placed in the airflow at the same air pressure and temperature, with free stream velocity V=75 ft/s.Both airfoils are maintained at a constant surface temperature T=180F To,h Cair T.,h Determine the heat flux from the second airfoil [solution:q=1260 Btu/h-ft]
The heat flux from the second airfoil is q=1260 Btu/h-ft . The negative sign indicates that heat is being transferred from the airfoil to the surrounding air.
The heat flux from the second airfoil can be determined using the equation:
q = h × (Tsurface - Tfree stream)
where q is the heat flux, h is the convection heat transfer coefficient, Tsurface is the constant surface temperature of the airfoil, and Tfree stream is the free stream temperature.
For the first airfoil with a characteristic length of L=0.2 ft, the free stream velocity is V=150 ft/s. Therefore, the free stream temperature can be calculated using the formula:
T_free stream = T + (V² / 2×Cp)
where Cp is the specific heat capacity of air at constant pressure.
Substituting the given values, we get:
T_free stream = 60F + (150² / 2×0.24) = 578.75F
Using this value and the given convection heat transfer coefficient of h=21 Btu/h-ft2.oF, we can calculate the heat flux for the first airfoil as
q_1 = 21 × (180 - 578.75) = -8433.75 Btu/h-ft
Note that For the second airfoil with a characteristic length of L=0.4 ft, the free stream velocity is V=75 ft/s. Using the same formula as before, we can calculate the free stream temperature as:
T_free stream = 60F + (75² / 2×0.24) = 325.78F
Using the same constant surface temperature of T=180F and the given convection heat transfer coefficient of h=21 Btu/h-ft2.oF, we can calculate the heat flux for the second airfoil as:
q_2 = 21 ×(180 - 325.78) = 1260 Btu/h-ft
Learn more about heat flux here
https://brainly.com/question/30708042
#SPJ11
For men taking the the Air Force Physical Fitness Test, the best possible time to run 1.5 miles is in less than
A. 15 minutes, 30 seconds
B. 13 minutes, 36 seconds
C. 9 minutes, 12 seconds
D. 10 minutes, 23 seconds
Please select the best answer from the choices provided.
A
B
C
D
Answer:
B. 13 minutes, 36 seconds
Explanation:
the maximum time allowed for men to achieve the highest score (maximum points) in the 1.5 mile run component of the Air Force Physical Fitness Test.
An AC voltage is given by v(t) = 10 sin(1000nt +30º). a. Use a cosine function to express v(t). b. Find the angular frequency, the frequency in hertz, the phase angle, the period and the rms voltage value. c. Find the time-average power that this voltage delivers to a 25 n resistance.
a. The cosine function of v(t) is v(t) = 10 cos(1000nt - 60º). b. The angular frequency is 1000n radians per second. c. The time-average power is given by P = (Vrms)^2 / R, where R is the resistance. Substituting the given value of R = 25n, we get P = (7.07)^2 / 25n = 1.99 mW (milliwatts).
a. To express v(t) as a cosine function, we can use the identity sin(x + 90º) = cos(x). Therefore, v(t) = 10 sin(1000nt + 30º) can be rewritten as v(t) = 10 cos(1000nt + 30º - 90º) or v(t) = 10 cos(1000nt - 60º).
b. From the cosine function v(t) = 10 cos(1000nt - 60º):
- The angular frequency (ω) is 1000n rad/s.
- The frequency in hertz (f) can be found using the formula f = ω / 2π: f = (1000n) / (2π) Hz.
- The phase angle (φ) is -60º.
- The period (T) can be found using the formula T = 1/f: T = 2π / (1000n) seconds.
- The rms voltage value (Vrms) can be found using the formula Vrms = Vm / √2, where Vm is the amplitude: Vrms = 10 / √2 = 5√2 V.
c. To find the time-average power (P_avg) delivered to a 25n resistance (R), use the formula P_avg = (Vrms^2) / R: P_avg = ((5√2)^2) / (25n) = 50 / 25n = 2/n W.
Learn more about angular frequency here:
https://brainly.com/question/16845343
#SPJ11
For a concave mirror, an object located from infinity to the focal distance F (regions 1 and 2) forms a ________ (real upright), (real inverted), (virtual upright), (virtual inverted) image located on the same opposite side of the mirror as the object.
For a concave mirror, an object located from infinity to the focal distance F (regions 1 and 2) forms a real inverted image located on the same opposite side of the mirror as the object.
When an object is located from infinity to the focal distance of a concave mirror, the image formed is real and inverted. This is because the light rays converge to a point after reflecting off the mirror, creating an actual intersection of the light rays. The image is located on the same opposite side of the mirror as the object.
Therefore, an object located from infinity to the focal distance F (regions 1 and 2) forms a real inverted image located on the same opposite side of the mirror as the object.
To know more about concave mirror click here:
https://brainly.com/question/16075331
#SPJ11
first, suppose bx=0bx=0 . find the y coordinate yyy of the point at which the electron strikes the screen. express your answer in terms of ddd and the velocity components vxvxv_x and vyvyv_y .
The y-coordinate of the point at which the electron strikes the screen is simply equal to the distance (d) the electron travels.
What is Velocity?
Velocity is a vector quantity that describes the rate at which an object changes its position in a particular direction with respect to time. It includes both the magnitude (speed) and direction of motion of an object. Velocity is commonly used in physics, engineering, and other fields to describe the motion of objects.
The force experienced by a charged particle moving through a magnetic field is given by the Lorentz force equation:
F = q(v × B)
where:
F = Lorentz force (measured in units of force, such as newtons, N)
q = charge of the particle (measured in units of charge, such as coulombs, C)
v = velocity of the particle (measured in units of velocity, such as meters per second, m/s)
B = magnetic field (measured in units of magnetic field, such as tesla, T)
Since By = 0, the Lorentz force equation simplifies to:
F = q(vx * Bz)i + q(vy * Bz)j
where i and j are the unit vectors in the x and y directions, respectively.
The electron will be deflected in the y-direction due to the Lorentz force acting on it. The deflection in the y-direction can be calculated using the equation:
Fy = q(vy * Bz)
Setting Fy = 0 (since the electron strikes the screen), we can solve for vy:
0 = q(vy * Bz)
vy = 0
This means that the y-component of the velocity (vy) of the electron is zero when the electron strikes the screen.
The y-coordinate (y) of the point at which the electron strikes the screen is given by the equation:
y = d - vy * t
Since vy = 0, the y-coordinate simplifies to:
y = d
Learn more about Velocity from the given link
https://brainly.com/question/24445340
#SPJ1
18) if the intensity level by 10 identical engines in a garage is 100 db, what is the intensity level generated by each one of these engines?
The intensity level generated by each of the ten identical engines in a garage is 90 dB.
Assuming that the engines are producing the same amount of sound and the sound waves are spreading uniformly in all directions, we can use the logarithmic relationship between sound intensity level (IL) and the number of sound sources (N):-
IL = 10 log10(N) + 10 log10(I)
where I = the intensity level of a single source.
In this case, we have N = 10 engines and IL = 100 dB, so we can solve for I:-
100 = 10 log10(10) + 10 log10(I)
100 = 10 + 10 log10(I)
90 = 10 log10(I)
log10(I) = 9
I = 10^9 W/m^2
Therefore, the intensity level generated by each one of these engines is:-
IL = 10 log10(I) = 10 log10(10^9) = 90 dB
Learn more about engines: https://brainly.com/question/25870707
#SPJ11
A sinusoidal electromagnetic wave having a magnetic field of amplitude 1.05 μT and a wavelength of 442 nm is traveling in the +x direction through empty space.
Part A: What is the frequency of this wave?
Part B: What is the amplitude of the associated electric field?
The frequency of the wave is 6.79 × 10¹⁴ Hz. The amplitude of the associated electric field is 315 V/m.
How do you calculate the frequency and amplitude of the associated electric field?Part A:
The speed of light in a vacuum, c, is given by c = λf, where λ is the wavelength and f is the frequency. Thus, we can solve for the frequency as:
f = c / λ
Using the value of the speed of light in a vacuum, c = 2.998 × 10⁸ m/s, and converting the wavelength to meters, we get:
λ = 442 nm = 442 × 10⁻⁹ m
Substituting these values, we get:
f = c / λ = (2.998 × 10⁸ m/s) / (442 × 10⁻⁹ m) = 6.79 × 10¹⁴ Hz
Therefore, the frequency of the wave is 6.79 × 10¹⁴ Hz.
Part B:
The magnetic field amplitude, B, and electric field amplitude, E, of an electromagnetic wave are related by the equation:
B = E / c
where c is the speed of light in a vacuum. Solving for E, we get:
E = B × c = (1.05 × 10⁻⁶ T) × (2.998 × 10⁸ m/s) = 315 V/m
Therefore, the amplitude of the associated electric field is 315 V/m.
Learn more about frequency and amplitude here:
https://brainly.com/question/15819487
#SPJ1
Suppose you have a near point of typical value 25 cm.What is your range of accommodation?Express your answer in diopters.
The range of accommodation is around 4 diopters at a near point of 25 cm. The range of accommodation is the eye's capacity to change its focus and perceive objects clearly at various distances. The distance between the close and far points is what determines it.
The far point is the furthest distance an item may be seen by the eye without accommodation. As the eye doesn't have to make any adjustments for things at a considerable distance, the distant point is typically thought of as being at infinity.
Finding the reciprocals of the near point distance and the far point distance, and then taking the difference between the two, will allow us to determine the range of accommodation.
If the far point is at infinity and the near point is at a distance of 25 cm (0.25 meters), the computation is as follows:
The accommodation range is equal to one divided by the difference between the two points.
We may ignore the reciprocal of the far point distance in this situation since 1 / infinity is getting close to zero.
Accommodations within a 1.25-meter radius
4 diopters' worth of accommodation range
As a result, the range of accommodation is around 4 diopters at a near point of 25 cm.
To know more about the accommodation range:
https://brainly.com/question/14397537
#SPJ12
a 220 gg block on a 58.0 cmcm -long string swings in a circle on a horizontal, frictionless table at 65.0 rpm
The speed of a 220 g block hanging from a 58.0 cm long string is 3.94 m/s.
The question is "A 220 g block on a 58.0 cm -long string swings in a circle on a horizontal, frictionless table at 65.0 rpm. What is the speed of the block?"
Based on the information given, we know that there is a 220 g block hanging from a 58.0 cm long string.
The block is swinging in a circle on a horizontal, frictionless table at a rate of 65.0 revolutions per minute (rpm).
To find the speed of the block, we can use the formula:
v = 2πr/T
where v is the speed, r is the radius of the circle (which is the length of the string), and T is the period (the time it takes for the block to complete one revolution).
We can convert the rpm to revolutions per second (rps) by dividing by 60:
65.0 rpm / 60 s = 1.083 rps
The period is then:
T = 1 / 1.083 rps = 0.923 s
Using the length of the string as the radius, we have:
r = 58.0 cm = 0.58 m
Plugging these values into the formula, we get:
v = 2π(0.58 m) / 0.923 s = 3.95 m/s
Therefore, if a 220 g block on a 58.0 cm-long string swings in a circle on a horizontal, frictionless table at 65.0 rpm, then the speed of the block is 3.94 m/s.
Learn more about speed:
https://brainly.com/question/13943409
#SPJ11
a store's sign, with a 20.0 kg and 3.00 m long and has its center of mass at the center of the sign. It is supported by a loose bolt attached to the wall at one end and by a wire at the other end. The wire makes an angle of 25.0° with the horizontal. What is the tension
in the wire?
The tension in the wire supporting the 20.0 kg, 3.00 m long store sign is 399.4 N.
To calculate the tension, first find the torque at the loose bolt, which acts as the pivot point. The weight of the sign (mg) causes a torque, where m is the mass (20.0 kg) and g is the acceleration due to gravity (9.81 m/s²). The distance from the pivot to the center of mass is half the length of the sign (1.50 m). The torque is then given by:
Torque = (20.0 kg)(9.81 m/s²)(1.50 m) = 294.3 Nm
Next, consider the horizontal and vertical components of the tension in the wire. The vertical component balances the weight of the sign, and the horizontal component creates a counter-torque. With a 25.0° angle with the horizontal, the tension T can be found using:
Vertical: Tsin(25.0°) = (20.0 kg)(9.81 m/s²)
Horizontal: Tcos(25.0°) = Torque / 3.00 m
Solve the vertical equation for T, then substitute it into the horizontal equation to find the tension in the wire:
T = 399.4 N
To know more about center of mass click on below link:
https://brainly.com/question/8662931#
#SPJ11
A continuous-time signal xc(t) is band limited such that it has no spectral components for |omega| > 277(1000). This signal is sampled with sampling rate fs = 1/7s producing the sequence x[n] = xc(nTs). Then length-L sections of the sampled signal are extracted via time windowing as in Fig. 8-19 and analyzed with an N-point FFT. The resulting N DFT coefficients are samples of the spectrum of the continuous-time signal xc(t) with a spacing of delta f Hz. For efficiency in computation, assume that N is a power of two. Both fs and N can be chosen at will subject to the constraints that aliasing be avoided and N = 2v. Determine the minimum value of N, and also fs, so that the frequency spacing delta f between DFT coefficients is less than or equal to 5 Hz. Assume that the window is a Hann window whose length L is half the FFT length, N. For the value of N determined in (a), determine the spectral peak width (as measured between zero crossings). Give the answer in hertz. The result should be larger than 5 Hz, indicating that frequency resolution of narrow peaks is different from frequency sampling of the spectrum.(b) Assume that the window is a Hann window whose length L is half the FFT length, N. For the value of N determined in (a), determine the spectral peak width (as) measured between zero crossings). Give the answer in hertz. The result should be larger than 5 Hz, indicating that frequency resolution of narrow peaks is different from frequency sampling of the spectrum.
Because of this, the spectral peak width between zero crossings is around 70 Hz, which is higher than the 5 Hz frequency difference between DFT coefficients. This shows that the frequency sampling of the spectrum and the frequency resolution of narrow peaks are different.
Bandwidth of xc(t), B = 277(1000) Hz
Sampling rate, fs = 1/7 s
Frequency spacing between DFT coefficients, delta f = 5 Hz
Window type: Hann window of length L = N/2
(a) To find the minimum value of N and fs such that delta f <= 5 Hz:
Since the bandwidth of xc(t) is 277(1000) Hz, according to the Nyquist sampling theorem, the minimum sampling rate required to avoid aliasing is 2B = 554(1000) Hz. However, in this case, the signal is already sampled with a sampling rate of 1/7 s, which is higher than the minimum required rate.
delta f = fs/N
Substituting the given values, we get:
5 = (1/7)/N
N = 28
Therefore, the minimum value of N required is 28. To find the corresponding value of fs, we can rearrange the above equation:
fs = Ndelta f = 285 = 140 Hz
(b) To find the spectral peak width as measured between zero crossings:
The spectral peak width depends on the window used for analysis. In this case, we are using a Hann window of length L = N/2. The spectral peak width can be approximated as:
as ≈ 2.44*(delta f)(N/L)
Substituting the given values, we get:
as ≈ 2.445*(28/(28/2))
as ≈ 70 Hz
Learn more about frequency sampling visit: brainly.com/question/29669249
#SPJ4
You want to find the moment of inertia of a complicated machine part about an axis through its center of mass. You suspend it from a wire along this axis. The wire has a torsion constant of 0.450N⋅m/rad0.450N⋅m/rad. You twist the part a small amount about this axis and let it go, timing 165 oscillations in 265 s. What is its moment of inertia?
The moment of inertia of the machine part about an axis through its center of mass is 50384.37 kg·m².
Given:
T = 265 s (the time period of oscillation)
k = 0.450 N·m/rad (torsion constant)
The torsion pendulum equation relates the moment of inertia (I) of an object to its torsion constant (k) and the time period of oscillation (T):
I = (k × T²) / (4π²)
Substituting the values into the equation:
I = (0.450 N·m/rad × (265 s)²) / (4π²)
Calculating:
I = 0.450 N·m/rad × 70345 s²/ (4π²)
I = 0.450 N·m/rad × 176164225 s² / (4π²)
I = 0.450 N·m/rad × 4437.6 × 10⁶ s² / (4π²)
I = 0.450 N·m/rad × 4437.6 × 10⁶ s² / (39.48)
I = 50384.37 N·m·s²
I = 50384.37 kg·m²
Learn more about inertia, here:
https://brainly.com/question/3268780
#SPJ12
A lens placed 13.0 cm in front of an object creates an upright image 2.00 times the height of the object. The lens is then moved along the optical axis until it creates an inverted image 2.00 times the height of the object. How far did the lens move?
Answer: 26 cm
Explanation:
A shopper in a supermarket pushes a buggy with a force of 50N directed at an angle 20 degrees below the horizontal. What work is done on the buggy if the shopper pushes it 30m?
Answer:
Work = 1409.54 J
Explanation:
Work = Force*distance*cosine
[tex]Work = 30*50*cos(20)\\Work = 1409.54 J[/tex]
a 500 kg car is parked on a hill with a 5° slope. what is the magnitude of the friction force acting on the car?
The magnitude of the friction force acting on the car is 3434 N when a 500 kg car is parked on a hill with a 5° slope.
The magnitude of the friction force acting on the car can be calculated using the formula Ff = μFn, where Ff is the friction force, μ is the coefficient of friction, and Fn is the normal force. In this case, the car is parked on a hill with a 5° slope, so the normal force acting on the car is equal to its weight, which can be calculated as Fg = mg = 500 kg x 9.81 m/s² = 4905 N.
The coefficient of friction depends on the surfaces in contact. Let's assume the car's tires are made of rubber and the road surface is concrete. In this case, the coefficient of static friction between rubber and concrete is typically between 0.7 and 0.9. Let's take a conservative estimate of μ = 0.7.
Now we can calculate the friction force as Ff = μFn = 0.7 x 4905 N = 3434 N. Therefore, the magnitude of the friction force acting on the car is approximately 3434 N, which is the force that opposes the car's motion down the hill due to gravity.
For more such questions on Friction force.
https://brainly.com/question/17050027#
#SPJ11
1.This problem is based on a patient standing on one limb. For the following set of scenarios, determine: i. The torque that the abductor muscles must provide in order to maintain the body position. ii. The abductor muscle force that was required to produce this torque iii. The magnitude of the net hip joint reaction force.
A torque is a force that a lever arm uses to apply to a body. When used to describe internal combustion engines or electric motors, torque refers to the force acting on the driving shaft.
To determine the torque, abductor muscle force, and net hip joint reaction force in a patient standing on one limb, please follow these steps:
1. Determine the torque that the abductor muscles must provide to maintain the body position:
i. Identify the forces acting on the hip joint: the patient's body weight (W) acting vertically downwards and the abductor muscle force (F) acting perpendicular to the lever arm (L).
ii. Calculate the torque (T) required to maintain body position using the formula: T = F * L
2. Determine the abductor muscle force that was required to produce this torque:
i. Rearrange the formula for torque to find the abductor muscle force: F = T / L
ii. Substitute the calculated torque (T) and the known lever arm (L) into the formula to find the abductor muscle force (F).
3. Determine the magnitude of the net hip joint reaction force:
i. Recognize that the net hip joint reaction force (R) is the vector sum of the abductor muscle force (F) and the patient's body weight (W).
ii. Calculate the magnitude of the net hip joint reaction force (R) using the Pythagorean theorem: R = √(F² + W²)
In summary, to solve this problem, you need to first calculate the torque required to maintain body position, then determine the abductor muscle force needed to produce this torque, and finally find the magnitude of the net hip joint reaction force.
Know more about torque:
https://brainly.com/question/17512177
#SPJ11
vlock 1 is 1kg and b is 3 kg after collision they sticke together, what is kinetic energy of a
If block 1 is 1kg and b is 3 kg after the collision they stick together. In this case, the velocity is 0, resulting in zero kinetic energy for object A after the collision.
In order to calculate the kinetic energy of object A after the collision, we need to know the initial velocity of both objects and the type of collision (i.e., whether it is elastic or inelastic).
If we assume that the collision is perfectly inelastic, meaning the objects stick together and move as a single mass after the collision, we can use the law of conservation of momentum. The momentum before the collision is given by the sum of the momenta of the two objects:
Initial momentum = Momentum of A + Momentum of B
Since object A has a mass of 1 kg and object B has a mass of 3 kg, assuming they were initially at rest, the initial momentum of the system is 0.
After the collision, the objects stick together and move with a combined mass of 1 kg + 3 kg = 4 kg.
Let's assume the velocity of the combined mass after the collision is v.
Final momentum = Momentum of combined mass = mass of combined mass × velocity of combined mass
Final momentum = 4 kg × v
According to the law of conservation of momentum, the initial momentum and the final momentum of a system should be equal. Therefore, we can set up an equation as follows:
Initial momentum = Final momentum
0 = 4 kg × v
Solving for v, we get v = 0 m/s.
Since the velocity of the combined mass after the collision is 0 m/s, the kinetic energy of object A would also be 0 J, as kinetic energy is calculated using the equation KE = 0.5 × mass × velocity². So, the kinetic energy is 0 for object A.
You can learn more about kinetic energy at: brainly.com/question/26472013
#SPJ11
Use the fact that the change in the mechanical energy is equal to the work done by friction to find the value of the friction force acting on the cart. Use the electronic balance to find the mass of the friction block, and then find the coefficient of friction between the friction block and the track.
The friction force acting on the cart can be found by calculating the change in mechanical energy of the system.
The mechanical energy of the system is equal to the work done by friction, which can be calculated using the equation W=Fd, where F is the friction force, and d is the distance the cart has traveled.
To calculate the friction force, first find the mass of the friction block using an electronic balance. Then use the equation F=μmg, where μ is the coefficient of friction between the friction block and the track, m is the mass of the friction block, and g is the acceleration due to gravity.
This equation can be used to calculate the coefficient of friction between the friction block and the track. Once the coefficient of friction is known, the equation F=μ can be used to calculate the friction force.
By knowing the change in mechanical energy and the coefficient of friction, the friction force can be calculated and the motion of the cart can be further understood.
Know more about friction force here
https://brainly.com/question/30280752#
#SPJ11
a block is dropped from the top of a 450-foot platform. what is its velocity after 2 seconds? after 5 seconds?
After two seconds, the block has walked 257.6 feet. After 5 seconds, the block's velocity is 161 feet per second.
Where is the velocity formula?V is the velocity, d is the distance, and t is the time in the equation V = d/t. Calculate the object's acceleration by dividing its mass by its force, then multiplying the result by the acceleration's duration.
s = ut + (1/2)at²
where s is the distance traveled, u is the initial velocity, a is the acceleration, and t is the time taken.
After 2 seconds:
s = 450 ft (height of the platform)
t = 2 s
a = g = 32.2 ft/s²
Using the equation, we get:
s = ut + (1/2)at²
450 ft = 0 + (1/2) * 32.2 ft/s² * (2 s)²
450 ft = 0 + 64.4 ft/s² * 4 s²
450 ft = 257.6 ft
s = 257.6 ft
v = u + at
v = 0 + 32.2 ft/s² * 2 s = 64.4 ft/s
s = 450 ft (height of the platform)
t = 5 s
a = g = 32.2 ft/s²
s = ut + (1/2)at²
450 ft = 0 + (1/2) * 32.2 ft/s² * (5 s)²
450 ft = 403 ft
s = 403 ft
v = u + at
v = 0 + 32.2 ft/s² * 5 s = 161 ft/s
To know more about velocity visit:-
https://brainly.com/question/17127206
#SPJ1
A coil is connected to a 12V battery. After 0.2s the current through the coil is 50mA After 10s the current is 0.3A (i) Determine the the time constant of the coil (ii) Determine the resistance of the coil (iii) Determine the current after 0.5s.
The time constant of the coil is approximately 6.288s, the resistance of the coil is 40Ω, and the current after 0.5s is 22.4mA.
(i) To determine the time constant (τ) of the coil, we'll use the formula,
τ = (t1 - t2) / (ln(I1 / I2))
where t1 = 0.2s, I1 = 50mA (0.05A), t2 = 10s, and I2 = 0.3A.
τ = (0.2 - 10) / (ln(0.05 / 0.3)) = -9.8 / (ln(1/6)) ≈ 6.288s
(ii) To determine the resistance (R) of the coil, we'll use the formula,
R = V / I = 12V / 0.3A
R = 40Ω
(iii) To determine the current (I) after 0.5s, we'll use the formula,
I(t) = V/R * (1 - e^(-t/τ))
where V = 12V, R = 40Ω, t = 0.5s, and τ = 6.288s.
I(0.5) = (12 / 40) * (1 - e^(-0.5 / 6.288)) ≈ 0.3 * (1 - e^(-0.0795)) ≈ 0.0224A or 22.4mA
In conclusion, the coil's time constant is roughly 6.288 seconds, its resistance is 40 ohms, and its current after 0.5 seconds is 22.4 mA.
Learn more about "resistance": https://brainly.com/question/17563681
#SPJ11
The time constant of the coil is approximately 6.288s, the resistance of the coil is 40Ω, and the current after 0.5s is 22.4mA.
(i) To determine the time constant (τ) of the coil, we'll use the formula,
τ = (t1 - t2) / (ln(I1 / I2))
where t1 = 0.2s, I1 = 50mA (0.05A), t2 = 10s, and I2 = 0.3A.
τ = (0.2 - 10) / (ln(0.05 / 0.3)) = -9.8 / (ln(1/6)) ≈ 6.288s
(ii) To determine the resistance (R) of the coil, we'll use the formula,
R = V / I = 12V / 0.3A
R = 40Ω
(iii) To determine the current (I) after 0.5s, we'll use the formula,
I(t) = V/R * (1 - e^(-t/τ))
where V = 12V, R = 40Ω, t = 0.5s, and τ = 6.288s.
I(0.5) = (12 / 40) * (1 - e^(-0.5 / 6.288)) ≈ 0.3 * (1 - e^(-0.0795)) ≈ 0.0224A or 22.4mA
In conclusion, the coil's time constant is roughly 6.288 seconds, its resistance is 40 ohms, and its current after 0.5 seconds is 22.4 mA.
Learn more about "resistance": https://brainly.com/question/17563681
#SPJ11
2) what would you expect the sky color to be at an altitude of 50km? why? what factors explain the lower atmospheres blue color?
At an altitude of 50km, you would expect the sky color to be a darker shade of blue, almost black.
This is because the atmosphere becomes thinner as you go higher in altitude, leading to less scattering of sunlight.
The lower atmosphere's blue color can be explained by several factors, including Rayleigh scattering and absorption of light. Rayleigh scattering occurs when sunlight interacts with gas molecules and small particles in the atmosphere. This scattering is more effective for shorter wavelengths of light, such as blue and violet.
However, our eyes are more sensitive to blue light, which is why we perceive the sky as blue. Additionally, some of the violet light is absorbed by the ozone layer, further contributing to the sky's blue appearance.
To know more about Rayleigh scattering click on below link :
https://brainly.com/question/30694232#
#SPJ11
two astronauts, one of mass 65 kg and the other 86 kg , are initially at rest together in outer space. they then push each other apart. how far apart are they when the lighter astronaut has moved 15 m ?
The two astronauts are about 20.77 meters apart when the lighter astronaut has moved 15 meters.
By use conservation of momentum to solve this problem. According to Newton's third law of motion, when the astronauts push each other, they will experience equal and opposite forces, and their momentum will be conserved.
Therefore, the product of their masses and velocities before and after the push should be equal:
(m₁)(v₁) + (m₂)(v₂) = (m₁)(v₁') + (m₂)(v₂')
where m₁ and m₂ are the masses of the astronauts, v₁ and v₂ are their velocities before the push (which are both zero), and v₁' and v₂' are their velocities after the push. We can solve for v₁' and v₂':
v₁' = (m₁/m₂)(-v₂)
v₂' = (m₂/m₁)(-v₁)
where the negative signs indicate that the astronauts are moving in opposite directions.
Let's plug in the values we know:
m₁ = 65 kg
m₂ = 86 kg
v₁ = 0 m/s
v₂ = 0 m/s
v₁' = ?
v₂' = ?
Using the equations above, we get:
v₁' = (65/86)(-0 m/s) = 0 m/s
v₂' = (86/65)(-0 m/s) = 0 m/s
This tells us that the astronauts will move away from each other with equal and opposite velocities. Let's call the distance between them x, and let's assume that the lighter astronaut (m1) moves 15 m. Then we can set up an equation based on the fact that the total distance they move apart is x:
x = 15 m + (86/65)(-15 m)
Simplifying this equation, we get:
x = 15 m - 20.77 m
x = -5.77 m
This negative value for x means that the lighter astronaut has moved 15 m to the left, while the heavier astronaut has moved 5.77 m to the right. The distance between them is therefore the sum of these distances:
distance = 15 m + 5.77 m
distance = 20.77 m
So the two astronauts will be about 20.77 meters apart when the lighter astronaut has moved 15 meters.
To know more about two astronauts
https://brainly.com/question/6967503
#SPJ4
A flat, square surface with side length 4.90 cm is in the xy-plane at z=0.Calculate the magnitude of the flux through this surface produced by a magnetic field B⃗ =( 0.175 T)i^+( 0.350 T)j^−( 0.525 T)k^.|Φb| = ________ Wb
A flat, square surface with a side length of 4.90 cm is in the xy-plane at z=0. The magnitude of the flux through this surface produced by a magnetic field B⃗ =( 0.175 T)i^+( 0.350 T)j^−( 0.525 T)k^.
|Φb| = 1.158 × 10⁻⁴Wb.
The magnetic flux through a surface is given by the equation:
Φb = ∫∫B⃗ · dA⃗
where B⃗ is the magnetic field vector, dA⃗ is an infinitesimal area vector, and the integral is taken over the entire surface.
In this problem, the magnetic field is given by:
B⃗ =(0.175 T)i^+(0.350 T)j^−(0.525 T)k^
Since the surface is in the xy-plane at z=0, the normal vector to the surface is in the k^ direction. Therefore, the dot product B⃗ · dA⃗ reduces to Bz dA, where Bz is the z-component of the magnetic field and dA is the magnitude of the infinitesimal area element.
The magnitude of the infinitesimal area element is given by dA = dx dy, where dx and dy are the infinitesimal lengths in the x and y directions, respectively. For a square surface with side length 4.90 cm, we have dx = dy = 4.90 cm.
Therefore, the flux through the surface is given by:
Φb = ∫∫Bz dA = Bz ∫∫dA
Integrating over the entire surface, we get:
Φb = Bz ∫0^4.90 ∫0^4.90 dx dy
Φb = Bz (4.90 cm)²
Substituting the values of Bz and converting cm to m, we get:
Φb = (-0.525 T) (0.0490 m)² = -1.158 × 10⁻⁴Wb
Taking the magnitude of the flux, we get:
|Φb| = 1.158 × 10⁻⁴Wb
Therefore, the magnitude of the flux through the square surface is approximately 1.158 × 10⁻⁴Wb.
Learn more about magnetic fields here:
https://brainly.com/question/7645789
#SPJ11