Question 2
1 p
White phosphorus ignites easily. This is an example of _____ property

- physical
- neither
- chemical
- both

Question 21 PWhite Phosphorus Ignites Easily. This Is An Example Of _____ Property - Physical - Neither

Answers

Answer 1

Answer:

Chemical properties because if it was physical property then it will glow in dark


Related Questions

If you run this reaction with 15 g of CuCl2 and 20 g NaNO3, what is the theoretical yield of NaCl?

Answers

The theoretical yield of a substance is the amount of the mass that is calculated from stoichiometry. The mass of sodium chloride produced is 13.03 gms.

What is mass?

Mass of the substance is a multiplication of the molar mass and moles.

The balanced reaction is given as:

CuCl₂ + 2NaNO₃ ⇒ 2NaCl + Cu(NO₃)₂

Moles of copper chloride are calculated as: 15 ÷ 134.45 = 0.115 moles

Moles of sodium nitrate are calculated as: 20 ÷ 84.99 = 0.2353 moles

From the reaction, 1 mole of copper chloride gives 2 moles of sodium chloride so, 0.115 moles of copper chloride will produce 0.223 moles.

Similarly, 2 moles of sodium nitrate produce 2 moles of sodium chloride so, 0.2353 moles produce 0.4706 moles.

From this, it can be concluded that copper chloride is a limiting reagent and will be used to calculate the mass of NaCl.

Mass of NaCl is calculated as: Mass = 0.223 moles × 58.44 = 13.03 gms.

Therefore, 13.03 gms is the theoretical yield of sodium chloride.

Learn more about theoretical yield here:

https://brainly.com/question/1419024

#SPJ1

A balloon inflated in a room at ayo℃ has a volume
of 4,004, the balloon is then heated to a tempicture of
58°C. What is the new volume if the pressure remains constient?

Answers

Answer:

new volume = 4.458 Liters

Explanation:

A balloon inflated in a room at 24°c has a volume of 4.00Liters The balloon is heated to a temperature of 58°c.What is the new volume if the pressure remains constant

charles law

volume1/temperature1 = volume2/temperature2

temperature has to be converted to kelvin

temperature 1 = 24+273=297

temperature 2 = 58+273=

4/297 = volume2/331

volume2 = (4*331)/297

volume2 = 4.45791245791 Liters

https://brainly.in/question/10937106?

How does the kinetic energy of solids, liquids, and gases compare?
OA. Gases have no kinetic energy, solids have a little, and liquids have
the most.
O
B. Gases have the same kinetic energy as liquids, which is more than
solids.
O
C. Gases have the highest kinetic energy, followed by liquids, and
then solids.
O D. Gases have the lowest kinetic energy, followed by liquids, and then
solids.

Answers

Answer:

Gases have the highest kinetic energy, followed by liquids, and then solids.

Explanation:

Question:

How does the kinetic energy of solids, liquid, and gases compare ?

Context:

Higher kinetic energy causes particles to vibrate or move around faster. Solids have the lowest kinetic energy so vibrate very little.

Liquids have more kinetic energy so particles slide past each other.

Gases have the most kinetic energy so fly around in the air.

Answer:

C

Explanation:

you can relate this with their temprature, more kinetic energy means more movement of molecules. This creates heat which then melts or vaporizes substances. So, as K.E increases a substance will change from solid to liquid and eventually gas.

I need help please;-;

Answers

The order of increasing reactivity of the metals is: magnesium, sodium, and potassium.

How does the reactivity of metals increase?

The reactivity of metals increases as one goes down the group and increases from right to left in th periodic table.

For the three elements, sodium potassium, and Magnesium, the least reactive is magnesium while the most reactive is potassium.

This is because of increase in reactivity based on the properties of the elements.

Therefore, the order of increasing reactivity of the metals is: magnesium, sodium, and potassium.

Learn more about reactivity of metals at: https://brainly.com/question/24866635

#SPJ1

Ammonia is produced by reacting hydrogen and nitrogen gases. If 30.0L of hydrogen is mixed with 12.0L of nitrogen at the same temperature and pressure, what is the maximum volume of ammonia gas that could be produced?

Answers

[tex](2.4L)NH_3[/tex] is the maximum volume of ammonia gas that could be produced.

What is a mole?

A mole is a very important unit of measurement that chemists use. A mole of something means you have 602,214,076,000,000,000,000,000 of that thing, like how having a dozen eggs means you have twelve eggs.

Here is the balanced equation:

[tex]N_2 +3H_2[/tex] → [tex]2NH_3[/tex]

At STP, 1 mole has a volume of 22.4 Liters. To do a dimensional analysis conversion from Liters to moles:

Please observe that Liters and moles vary directly, therefore, we can simply multiply each of the coefficients (that represent moles) by

1.2 L to obtain the volumes:

[tex]\frac{N Litres}{1} \frac{1}{22.4 Litres} =\frac{N }{22.4} mole[/tex]

[tex](1.2L)N_2+(3.6L)H_2 = (2.4L)NH_3[/tex]

Hence, [tex](2.4L)NH_3[/tex] is the maximum volume of ammonia gas that could be produced.

Learn more about the moles here:

https://brainly.com/question/15209553

#SPJ1

What is the name of the configuration management procedure that involves the collection of information about a system under normal operating conditions, to be used as a comparison when conditions are abnormal

Answers

The name of the configuration management procedure that involves the collection of information about a system under normal operating conditions is Baselining.

What is Baselining?

Baselining is a management process used to analyze a collection of information about a particular system.

This procedure (Baselining) is well known to analyze computer performance in a given network.

In conclusion, the name of the configuration management procedure that involves the collection of information about a system under normal operating conditions is Baselining.

Learn more about Baselining here:

https://brainly.com/question/25836560

#SPJ1

Identify the solutions among the following mixtures
Soil, Sea water, Air, Coal, Soda water​

Answers

Answer:

Out of the above mixtures, seawater, air, and soda water are solutions.

hope this helps :3

The distance between city A and city B is 22 miles. The distance between city B and city C is 54 miles. The distance between city A and city C is 51 miles.

What type of triangle is created by the three cities?

an acute triangle, because 222 + 542 >512
an acute triangle, because 222 + 512 >542
an obtuse triangle, because 222 + 542 >512
an obtuse triangle, because 222 + 512 >542

Answers

The type of triangle that is created by the three cities is an obtuse triangle, because 22 + 51 > 54.

What is an obtuse triangle?

Obtuse triangle is a type of triangle in which any of its angle is greater than 90 degrees, and the sum of the interior angles must by equal to 180 degrees.

Considering length AB and AC = 22 miles + 51 miles = 73 miles

The sum of length AB and AC is greater than length BC, and the opposite angle of side BC is greater than 90 degrees.

Thus, the type of triangle that is created by the three cities is an obtuse triangle, because 22 + 51 > 54.

Learn more about obtuse triangle here: https://brainly.com/question/5023725

#SPJ1

how many moles of oxygen from the are needed to consume 2.49 mol c55h104o6

Answers

The answer is approximately 20

Which planet do scientists believe prevented the asteroids in the asteroid belt from forming a planet?.

Answers

The planet that scientists believe prevented the asteroids in the asteroid belt from forming a planet is Jupiter.

What are asteroids?

Asteroids are known to be leftovers from the formation of the solar system for about 4.6 billion years ago.

Why Jupiter prevented asteroids

The gravity in Jupiter is so strong, that it caused the instability of asteroid orbits within the Kirkwood gapsIt prevented planetary bodies from forming in between Mars and itselfIt also caused small objects to collide with each other and fragment into the asteroids seen today

Therefore, Jupiter made asteroids form group of debris, rather than forming a planet.

Learn more about asteroids here:

https://brainly.com/question/11996385

#SPJ1

Common Tasks for Chemists.

Answers

Answer:

analysis organic and inorganic compounds,refine substances and chemicals products

Select all statements that correctly describe the stability of eclipsed and staggered conformers. Multiple select question. Staggered conformers possess torsional strain. Eclipsed conformers possess torsional strain. Staggered conformers are lower in energy than eclipsed conformers. Electron-electron repulsion between bonds in an eclipsed conformer may contribute to the low energy of this conform

Answers

Eclipsed conformers possess torsional strain and Staggered conformers are lower in energy than eclipsed conformers are TRUE about the stability of conformers.  

What does 'eclipsed conformers' mean?

Eclipsed conformers are molecular arrangements where two substituents are very close and thus produce torsion.

Moreover, Staggered conformers are molecular arrangements where substituents are found at a maximum length.

In conclusion, Eclipsed conformers possess torsional strain and Staggered conformers are lower in energy than eclipsed conformers are TRUE about the stability of conformers.  

Learn more about Eclipsed conformers here:

https://brainly.com/question/17634613

#SPJ1

In a neutralization reaction, an aqueous solution of an arrhenius acid reacts with an aqueous solution of an arrhenius base to produce:.

Answers

An aqueous solution of an arrhenius acid reacts with an aqueous solution of an arrhenius base to produce water and salt.

What is a Salt?

This is a compound which is formed as a result of a neutralization reaction between acid and base.

Arrhenius acid reacts with an aqueous solution of an arrhenius base to produce water and salt due to increased concentration of H+ and OH- respectively.

Read more about Salt here https://brainly.com/question/13818836

#SPJ1

PLEASE I REALLY NEED HELP!!! ITS NOT MULTIPLE CHOICE BTW :'(

A 76.0-gram piece of metal at 96.0 °C is placed in 120.0 g of water in a calorimeter at 24.5 °C. The final temperature in the calorimeter is 31.0 °C. Determine the specific heat of the metal. Show your work by listing various steps and explain how the law of conservation of energy applies to this situation.

Answers

Answer:

660J/kg.°C

Explanation:

Using the fact that

∆E of metal + ∆E of water = 0

∆E of the metal = Q = m*c*(T2-T1)

Where

Q = heat lost or gained = ?

m = mass of metal in kg = 0.076kg

c = specific heat of the metal = ?

T1 = 96°C

T2=31°C

∆E of the water=Q= m*c*(T2-T1)

Where

Q = 0.120*4180*6.5 = 3260J

Therefore

3,260J + Q of the metal =0

3,260J + 0.076*C*(31.0–96.0)=0

3,260J - 4.94c = 0

3,260 = 4.94c

3,260/4.94 = c

660J/kg.°C = specific heat of the metal

hope this helps:)

What is the mass of 5.00 moles of KaS04?
A
34.8 grams
B
174 grams
C
675 grams
D
870 grams

Answers

Answer: D

Explanation:

I assume you meant [tex]\text{K}_{2}\text{SO}_{4}[/tex].

The atomic mass of potassium is 39.0983 g/mol.The atomic mass of sulfur is 32.065 g/mol.The atomic mass of oxygen is 15.9994 g/mol.

So, the formula mass of potassium sulfate is 2(39.0983)+32.065+4(15.9994)=174.2592 g/mol.

So, 5.00 moles have a mass of (5.00)(174.2592), which is about 870 g

how many grans of NaoH Are needed to neutralize grans of H2So4​

Answers

Answer :]

to convert from g NaOH to mol NaOH. = 1.48 g NaOH are needed to neutralize the acid.

A container of carbon dioxide (CO2) has an initial temperature of 170 K with a pressure of 50 kPa. When the container is heated the pressure is measured at 283 kPa. The volume is constant at 12 L throughout. What is the final temperature of the carbon dioxide (CO2)?
A. 1179.16 K
B. 6.94 K
C. 962.2 K
D. 391.0 K

Answers

Answer:

962.2 K

Explanation:

Ideal Gas Law Equation:

PV = nRT

Writing a Equation to find T2:

PV = nRT

(P1V)/(nT1) = R = (P2V)/(nT2)

(P1)/(T1) = R = (P2)/(T2)                  V and n cancel out since they are constant.

(P1)/(T1) = (P2)/(T2)

T2 = (P2)(T1)/(P1)

Substituting Into the Equation:

T2 = (283 kPa * 170 K)/(50 kPa)

T2 = 962.2 K

6. Explain the impact on fresh water of:
a. Farming wastes
b. Household pollutants
c. Industrial wastes
d. Erosion
e. Oil and Gasoline
f. heat
7. In your opinion which of the above-mentioned pollutions is more dangerous?

Answers

Fresh water pollutants  are substances which pollute fresh water and  industrial waste, is most harmful fresh water pollutant to man and aquatic organisms.

What are pollutants?

Pollutants are substances which cause harm when they are present in the environment.

Pollutants include chemicals such as petroleum and material such as sewage.

The presence of pollutants in freshwater results in water pollution and make the water unfit for drinking purposes and also harms aquatic life in freshwaters.

Some freshwater pollutants include:

Farming wastesHousehold pollutantsIndustrial wastesErosionOil and Gasolineheat

Of these pollutants, the most dangerous fresh water pollutant is industrial wastes as they kill aquatic organisms most due to the presence of harmful chemicals in them.

Therefore, fresh water pollutants such as industrial waste is most harmful to man and aquatic organisms.

Learn more about pollutants at: https://brainly.com/question/1235358

#SPJ1

Classify the following as mixtures or pure substances. (a) the vegetable soup you had for lunch (b) the fertilizer your dad spreads on the front lawn in the spring (c) the salt you sprinkle on your French fries (d) the hydrogen peroxide you cleaned a cut finger with

Answers

(a) The vegetable soup you had for lunch: mixtures substances

(b) The fertilizer your dad spreads on the front lawn in the spring:   mixtures substances

(c) the salt you sprinkle on your French fries: pure substances

(d) the hydrogen peroxide you cleaned a cut finger with:  pure substances

What are mixtures?

In chemistry and related fields, a mixture refers to a substance that is composed of two or more substances. This is the opposite of a pure substance that has not been combined with others. In the case of vegetable soup, this is a mixture because it integrates multiple substances such as water, salt, vegetables, etc.

On the other hand, a mixture is classified as homogeneous if the elements are completely integrated, and the final substance is uniform or as heterogeneous if the mixture is not uniform. In the case of the soup, this can be classified as a heterogeneous mixture because in most cases you can identify the elements in it such as pieces of vegetables and therefore it is not a uniform or homogeneous mixture.

Thus, this could be the answer.

To learn more about mixture click here:

https://brainly.com/question/7709515

#SPJ1

I have ten moles of iron atoms in the reactant side of a reaction. Do I have enough information to determine how many moles of iron atoms I will have following the reaction? If so, how many moles of iron atoms will I have at the end of a reaction? If not, what else do I need to know?

Answers

Answer:

See below

Explanation:

If your reaction equation is balanced, you will know the number of Fe atoms following the reaction.....it will be the same on both sides of the equation.

pls help me with this chem question

Answers

Answer:

B

Explanation:

i just know

Answer:

B

Explanation:

Hydrocarbons are with hydrogen and carbon only, so therefore you can immediately eliminate C and D. Therefore, we are left with A and B. Unsaturated hydrocarbons have double bonds or more, so B would be our answer (Double bond between carbon 1 and 2)

When an atom loses an electron, it becomes d. ionized. e. a plasma. a. dissociated. b. an isotope. c. sublimated.

Answers

Answer:

When an atom loses an electron it becomes ionized

Ahmed doesn't believe in electromagnetism so he makes an electromagnet to prove his teacher wrong. To his surprise, the electromagnet works and he's able to pick up metal objects with it. Even still, he's not satisfied with his electromagnet because it's very weak. What can he do to make it stronger?

Answers: use a weaker battery
1. use a stronger battery
2. use a plastic nail
3. glue the wire to the nail
4. wrap the wire around the nail fewer times

Answers

Answer:

1) Use a stronger battery

Explanation:

I'm going to quote Northeastern University (I could try to type out an explanation but this will probably be more concise)

"Electromagnets are made of coils of wire with electricity passing through them. Moving charges create magnetic fields, so when the coils of wire in an electromagnet have an electric current passing through them, the coils behave like a magnet."

4) So, if the coils are creating a moving charge, and there are more coils, each coil will be "setting up" its own magnetic field.  This means that less coils will make the electromagnet weaker

2) Because it is an electromagnet, a plastic nail is not going to produce the same effect. An electromagnet is picking up metal, and it is not picking up plastic. This is because plastic (a material with low permeability) does not have a magnetic field that is able to interact with a magnet.

[Permeability is a measure of how easily magnetic lines of force can pass through a material.]

3) There's not really a point that I can imagine of gluing the wire to the nail. Glue would put more distance between the nail and the magnet than nothing being there at all.

1) More voltage in a battery produces a larger current in the wire. This means that the strength of an electromagnet is affected by the voltage/strength of the battery. So, a stronger battery would make the electromagnet stronger, and a weaker battery would make the electromagnet weaker.

The electromagnet works, and he's able to pick up metal objects with it, he does to make it stronger  to use a stronger battery. Therefore, option 1 is correct.

What is electromagnet ?

An electromagnet is a type of magnet where an electric current creates the magnetic field. The wire that makes up an electromagnet is typically twisted into a coil. A magnetic field is produced by a current flowing through the wire and is concentrated in the hole in the center of the coil.

Electrical devices including motors, generators, speakers, computers, and MRI machines cannot be built without electromagnets. They are well known for their ability to lift and move heavy magnetic objects, such as scrap iron.

Many electromagnets have an advantage over permanent magnets because they can be easily turned on and off, and increasing or decreasing the amount of electricity flowing around the core can control their strength.

Thus, option 1 is correct.

To learn more about electromagnet, follow the link;

https://brainly.com/question/3427992

#SPJ2

Calculate the volume of hydrogen chloride gas, HCl at s.t.p that would yield 1.2dm3 of 0.15mol/dm3 aqueous HCl solution. (Molar volume of a gas at s.t.p = 22.4dm3)

Answers

The volume of hydrogen chloride gas, HCl at s.t.p yielded is determined as 4.032 dm³.

Number of moles of the HCl gas yield

The number of moles of the gas yield is calculated as follows;

n = 1.2 dm³ x 0.15 mol/dm³

n = 0.18 mole

one mole of HCl gas at stp = 22.4 dm³

0.18 mole = ?

= 0.18 x 22.4 dm³

= 4.032 dm³

Thus, the volume of hydrogen chloride gas, HCl at s.t.p yielded is determined as 4.032 dm³.

Learn more about volume of gas here: https://brainly.com/question/25736513

#SPJ1

How many atoms are in 3.2 moles of N2

Answers

Answer:

38.54 x 10^23 atoms of N2

Explanation:

Each mole contains Avagadro's Number ( 6.022 x10^23) of particles

   3.2   x     6.022 x 10^23 = 19.27 x 10^23 MOLECULES

   N2  is TWO atoms    soooo    2 x 19.27 x 10^23 = 38.54 x 10^23 atoms

What is a real-life example of equilibrium and what would happen if there was a shift in the system of that example?

Answers

Answer:

Refrigerator

Explanation:

Think about it. Equilibrium is between 2 "places", and if you didn't open the fridge, there would be a buildup of cold air.

Because of that buildup, it would keep getting colder until it isn't possible to get cold anymore. That is equilibrium.

However, if you were to open the door for a very, very long time, you would lower the temp. inside the fridge, therefore causing for the room you are in to be slightly colder, and the fridge to decrease in cold. The fridge will still be slightly cold, but it won't be lukewarm if you leave it for 2 hours. (Unless it's broken)

That is equilibrium :)

A new band sensation is playing a concert and recording it for a live album to be released this summer. select all the statements that are true for band producing sound.

a) the frequency or amplitude of the sound waves will not change
b) the frequency or amplitude of the sound waves will change if the singer varies their voice
c)producing sound changes the wane from an electromagnetic wave to a mechanical wave
d)the produced sound waves are mechanical waves
e)the produced sound waves are electromagnetic waves
f) producing the sound does not change the wave type
g) producing sound changes the wave from mechanical wave to an electromagnetic wave

Answers

They travel in compressions and rarefactions and are propagated through air.

What are sound waves?

Sound waves are longitudinal waves. They travel in compressions and rarefactions and are propagated through air.

The following are true about sound waves:

the frequency or amplitude of the sound waves will change if the singer varies their voice.the produced sound waves are mechanical waves. producing the sound does not change the wave type

Learn more about sound waves:https://brainly.com/question/11797560

#SPJ1

when 2 moles of C6H6 react with excess Oxygen gas, how many moles of water are produced?
C6H6 + 9 O2 ------> 6CO2 + 6 H20

Answers

Answer:

12 moles H₂O

Explanation:

To find the amount of water produced, you need to use the given amount and multiply it by the mole-to-mole ratio from the equation. These numbers are the coefficients of the molecules you are converting from and to. When writing the ratio, make sure to arrange it in a way that allows for the cancellation of units.

1 C₆H₆ + 9 O₂ ----> 6 CO₂ + 6 H₂O

2 moles C₆H₆          6 moles H₂O
---------------------  x  -------------------------  =  12 moles H₂O
                                 1 mole C₆H₆

The conductance of the electric current through the electrolytic solution increases with
a)decrease in dilution
b)increase in dilution
c)increase in concentration
d)low degree of ionization

Answers

The conductance of the electric current through the electrolytic solution increases with increase in concentration.

What is electrolytic solution?

Electrolytic solutions are solutions that are capable of conducting an electric current due to presence of ions.

The current flowing in an Electrolytic solutions is calculated as;

Q = It

I = Q/t

where;

Q is charges

Increase in the concentration of the charges, increases the amount of charges in the solution and hence the conductance of the solutions will increase as well.

Learn more about Electrolytic solutions here: https://brainly.com/question/14654936

#SPJ1

Why can alkaline batteries not be recharged

Answers

Answer:

The biggest risk with recharging alkaline batteries is leakage. As you probably know, alkaline batteries leak even under normal circumstances. Internal off gassing, made worse by heat, creates pressure that can breach battery seals. Therefore, the risk of leakage is an even bigger risk when recharging.

Other Questions
Rosa and Luis are at a restaurant. Listen to the dialogue and fill in the blanks with the words that you hear.EL CAMARERO: Buenos das! Qu desean comer? Someone has failed their math test over and over again. Their most urgent need, according to Maslow's Hierarchy of Needs, is:A. Safety needsB. Esteem needsC. Love needs D. Self-actualization E. Physiological needs What can scientists learn from radiometric dating?A- how long ago a plant or animal livedB- how much time it took a fossil to formC- where a plant or animal livedD- whether a fossil has modern relatives why is it difficult to move the heavier object than the lighter object on any surface What is the author's viewpoint in the article "Famine and Conflict"?Famine only affects people in third-world countries.Limited food supplies is responsible for fear and anxiety in civilians in warring countries.Improved humanitarian efforts should help alleviate famine in warring countries.Food scarcity in war-torn areas is usually a direct result of the war. I play volleyball in spanish If particleboard is used as wall sheathing, the grade mark with type _____ or _____ should be stamped on it. deserts savannas and taigas are all examples of what biome. EETEssential Question (our overarching question): How does the author of the+ fiction piece draw on and transform themes, topics, character types, and/orother text elements from the myth, "Echo and Narcissus?"Question #1: How does the author of the fiction piece transform and connectthemes from the myth, "Echo and Narcissus?"Question #2: What topics are discussed in the fictional text, and how doesthe author draw on similar topics from the myth?Fictional Text = Dorian GrayQuestion #3: Compare and contrast the characters of the fictional text andthe mythQuestion #4: How does the author of the fictional text make connections tothe myth throughout the chapter? uly 9th Pages 89-1261. Why is the fact that Osvaldo a member of the Diablos gang important? (108)2, What happens when Steve's father visits him in prison?3.How does Steve represent his innocence in his notes? (115)4. What does the prevailing neighborhood attitude seem to be regarding Mr. Nesbitt's murder? (121)5. Why do you think that Steve chose to include the flashback about watching the cartoon?6. Why do Detectives Karyl and Williams come to the Harmon Household?OcabularySentence from textWe pick up a cacophony ofsounds."Cacophony-11714***Ustinguish Steve."Definition Which line in the excerpt from Eugene O'Neill's Beyond the Horizon reflects the idea of pursuing one's dreams?ROBERT: You'll have to, to understand. Well, in those days, when Ma was fixing meals, she used to get me out of the way by pushing my chair to the west window and telling me to look out and be quiet. That wasn't hard. I guess I was always quiet.RUTH: (compassionately) Yes, you always wereand you suffering so much, too!ROBERT: (musingly) So I used to stare out over the fields to the hills, out there(He points to the horizon) and somehow after a time Id forget any pain I was in, and start dreaming. I knew the sea was over beyond those hills,the folks had told meand I used to wonder what the sea was like, and try to form a picture of it in my mind. (With a smile) There was all the mystery in the world to me then about thatfar-off seaand there still is! It called to me then just as it does now. (After a slight pause) And other times my eyes would follow this road, winding off into the distance, toward the hills, as if it, too, was searching for the sea. And Id promise myself that when I grew up and was strong, Id follow that road, and it and I would find the sea together. (With a smile) You see, my making this trip is only keeping that promise of long ago. 40 POINTS!!Which statement matches the vector operation shown on the coordinate grid? 100 POINTSDo the points (0,0) (a,0) (a,a) and (0,a) represents a special quadrilateral? If so, which one?If not, explain why not and what should be changed? Be sure to sketch the quadrilateral.If it does represent a special quadrilateral, use the formulas from this module to prove oneof the properties from section 6.01a. Show and explain your work including a sketch. For what values of t can 10x2+tx+8 be written as the product of two binomials? Which of the following is true about a function that is constant? It is a horizontal line. It moves in an upward direction. It moves in a downward direction. It is a curve. How would you write the equation with a slope of 2/3 and a y-intercept of -3y = (3/2)x + 3y = (2/3)x - 3y = 2/3 + 3y = 3/2 - 3 Which equations represent inverse variation? Check all that apply.y=2xpv = 13z = /x4=v/xh=9g/5 ABC ~ AMN and AM = 6, MB = 4, AN = 8, then what is the value of AC? PLEASE HELP WILL MARK BRAINLIESTHarriet possessed a note written by a friend commanding that she and Tilly be given passage.True. False. Solve for x to the nearest tenth.