Answer:
strong acid and weak base
Explanation:
#carryonlearning
In the given question dissociated solution describes the property of the strong base.
What are bases?Bases are substances which gives hydroxide ion into the solution.
Dissociation reaction of caustic soda will be represented as:
KOH → K⁺ + OH⁻
From the above dissociation we conclude that potassium hydroxide is fully dissociates into their ions means it is a strong base and will make the solution caustic.
Weak acid & strong acid is wrong because acids gives H⁺ ion not OH⁻.Weak base is also wrong as weak bases show partial dissociation only.Hence potassium hydroxide is a strong base.
To know more about strong bases, visit the below link:
https://brainly.com/question/7245674
#SPJ2
a 0.20 m solution contains 6.4 g of so2. what is the volume of the solution? report your answer with two significant figures.
The volume of the 0.20 m solution containing 6.4 g of SO2 is 0.5 liters (or 500 mL) when rounded to two significant figures.
To find the volume of a 0.20 m (mol/L) solution containing 6.4 g of SO2, we need to convert the mass of SO2 to moles and then use the molarity formula:
Molarity (M) = moles of solute / volume of solution (in liters)
First, let's convert the mass of SO2 to moles. The molar mass of SO2 is approximately 64.06 g/mol.
Moles of SO2 = mass of SO2 / molar mass of SO2
Moles of SO2 = 6.4 g / 64.06 g/mol
Moles of SO2 ≈ 0.1 mol
Now, we can use the molarity formula to calculate the volume of the solution
Molarity = moles of solute / volume of solution
0.20 M = 0.1 mol / volume of solution
Rearranging the equation to solve for the volume of solution:
Volume of solution = moles of solute / Molarity
Volume of solution = 0.1 mol / 0.20 M
Volume of solution = 0.5 L
Therefore, the volume of the 0.20 m solution containing 6.4 g of SO2 is 0.5 liters (or 500 mL) when rounded to two significant figures.
To know more about volume here
https://brainly.com/question/13161298
#SPJ4
Consider the four weak acids listed below.
Which would exist primarily as a cation in an aqueous solution with pH =1.4\%
glyoxylic acid, K_{a} = 6.6 * 10 ^ - 4 p*K_{a} = 3.2
propanoic acid, K_{a} = 1.4 * 10 ^ - 5 p*K_{a} = 4.9
) alloxanic acid, K_{a} = 2.3 * 10 ^ - 7 p*K_{a} = 6.6
all would be cationic
none would be cationic
malonic acid, K_{a} = 1.5 * 10 ^ - 3 p*K_{a} = 2.8
Based on the information provided, we can determine which weak acid would exist primarily as a cation in an aqueous solution with a pH of 1.4%.
To make this determination, we need to consider the pKa values of the weak acids. The lower the pKa value, the stronger the acid. In an acidic solution with a pH of 1.4%, we would expect the majority of weak acids to be in their protonated (cationic) form.
Comparing the pKa values:
Glyoxylic acid has a pKa of 3.2.
Propanoic acid has a pKa of 4.9.
Alloxanic acid has a pKa of 6.6.
Malonic acid has a pKa of 2.8.
Since the pH of the solution is 1.4%, which is highly acidic, we can conclude that only the weak acid with the lowest pKa value will exist primarily as a cation. Therefore, in this case, malonic acid (with a pKa of 2.8) would exist primarily as a cation in the aqueous solution with a pH of 1.4%.
Learn more about weak acids here, https://brainly.com/question/28939828
#SPJ11
there are two different compounds of phosphorus and fluorine. in pf6 , the mass of fluorine per gram of phosphorus is 4.86 g f/g p . in the other compound, pfx , the mass of fluorine per gram of phosphorus is 2.43 g f/g p . what is the value of x for the second compound?
The question is about two different compounds of phosphorus and fluorine. In the compound PF6, the mass of fluorine per gram of phosphorus is 4.86 g f/g p. Therefore, the value of x for the second compound is 6.
In the second compound, PFX, the mass of fluorine per gram of phosphorus is 2.43 g f/g p, and we need to find the value of X for this compound. We have to assume that the mass of phosphorus in both compounds is the same. Let's calculate the molar mass of PF6 and PFX:PF6: Molar mass of
PF6 = (1 × Molar mass of P) + (6 × Molar mass of F) = Molar mass of P + (6 × 19) = Molar mass of P + 114.
Molar mass of PF6 = 285.83 g/mol.
Mass of phosphorus in PF6 is 30.97 g/mol.
Mass of fluorine in PF6 is 254.86 g/mol.
PFX: Molar mass of PFX = (1 × Molar mass of P) + (x × Molar mass of F) = Molar mass of P + (x × 19).
The mass of phosphorus per gram in both the compounds is the same.
Therefore, we can equate the mass of fluorine in the two compounds:mass of fluorine in PF6 / mass of phosphorus in
PF6 = mass of fluorine in PFX / mass of phosphorus in PFX.
4.86 g f/g p = mass of fluorine in PFX / (30.97 g/mol)mass of fluorine in PFX = (4.86 g f/g p) × (30.97 g/mol)mass of fluorine in PFX = 150.82 g/mol
Molar mass of PFX = Molar mass of P + (x × 19) = 30.97 + (x × 19)150.82 = 30.97 + (x × 19)x × 19 = 119.85x = 119.85 / 19x = 6.31x = 6 (rounded off to the nearest whole number)
Therefore, the value of x for the second compound is 6.
To know more about compound visit:
https://brainly.com/question/14117795
#SPJ11
Which of the following statements is/are true? 1. At the equivalence point of a strong acid-strong base titration, the solution is acidic. II. At the equivalence point of a weak acid-strong base titration, the solution is basic because all of the weak acid has been converted to its conjugate base. III. Adding a common ion to the solution will decrease the solubility of the insoluble salt. Oa. II and III b) Ill only Oc. l only Od. I and 11 Oe. ll only
Statement II: At the equivalence point of a weak acid-strong base titration, the solution is basic because all of the weak acid has been converted to its conjugate base, is true.Statement I: At the equivalence point of a strong acid-strong base titration, the solution is neutral and not acidic.
Therefore, statement I is false.Statement III: Adding a common ion to the solution will decrease the solubility of the insoluble salt is also true.Therefore, option (b) is the correct choice, i.e. III only. Note that the solubility product constant (Ksp) decreases when a common ion is added. This is known as the common-ion effect and it decreases the solubility of the insoluble salt.A titration is a technique used to determine the concentration of an unknown substance. An acid-base titration is a method used to determine the concentration of an acid or base by adding a known volume of a solution with a known concentration (standard solution) to an unknown volume of a solution with an unknown concentration.
To know more about titration visit:
https://brainly.com/question/31707590
#SPJ11
Predict which member of each pair produces the more acidic aqueous solution?
F2^2+ or Fe^3+
Predict which member of each pair produces the more acidic aqueous solution?
Al^3+ or Ga^3+
Fluoride ions makes more acidic aqueous solution than Iron ions, while aluminum ions makes more acidic aqueous solution than Gallium.
The acidity of a solution can be determined by the ability of the species to donate protons (H⁺). In this case, F₂²⁺ has a greater tendency to donate protons than Fe³⁺ due to the electronegativity difference between fluorine and iron. Fluorine is highly electronegative, which enhances its ability to attract and stabilize the resulting negative charge after donating a proton. Therefore, F₂²⁺ produces a more acidic aqueous solution.
Similar to the previous case, the acidity of a solution depends on the ability to donate protons. Aluminum (Al) has a greater tendency to donate protons than gallium (Ga) because Al has a smaller atomic radius and higher effective nuclear charge compared to Ga. These factors lead to a stronger attraction between the protons and electrons in Al, making it easier for Al³⁺ to donate protons and produce a more acidic aqueous solution compared to Ga³⁺.
To know more about acidic and basic behavior of ions, visit,
https://brainly.com/question/30590408
#SPJ4
As a group, defend or debunk the following statement: "The frequency observed in emission is the same as the frequency observed in absorption."
The statement "The frequency observed in emission is the same as the frequency observed in absorption" can be debunked. In reality, the frequencies observed in emission and absorption processes are not necessarily the same.
Absorption occurs when an atom or molecule absorbs energy from a photon, transitioning from a lower energy state to a higher energy state. The frequency of the absorbed photon corresponds to the energy difference between these states. In contrast, emission happens when an atom or molecule releases energy in the form of a photon, transitioning from a higher energy state to a lower energy state. The frequency of the emitted photon corresponds to the energy difference between these states.
To learn more about Absorption, click here:
brainly.com/question/19054395
#SPJ11
Which compounds are not soluble in water at room temperature?
l CaS04 ll PbCl2 lll KBr lv KNO3 a. Iand II b. II and III only
c. III and IV only
d. Ill and IV only.
Compounds that are not soluble in water at room temperature are called insoluble compounds. These insoluble compounds are a group of substances that do not dissolve in water even when subjected to continuous stirring and mixing.
Aqueous solutions of these compounds have an extremely low solubility at normal temperatures and pressures. Due to their non-polar nature, they do not interact well with the polar water molecules, making it difficult for them to dissolve.To determine which compounds are insoluble in water at room temperature, let's look at the chemical formulas given in the question. The given compounds are:l CaSO4ll PbCl2lll KBrIV KNO3Among these, only lead chloride and calcium sulfate are not soluble in water at room temperature. Therefore, the correct answer is option A) I and II only.In conclusion, only CaSO4 and PbCl2 are not soluble in water at room temperature among the given compounds.
To know more about Compounds visit:
https://brainly.com/question/31457580
#SPJ11
75.0 g of p react with 20.8 g of chlorine gas, how many grams of excess reactant are leftover at the end of the reaction?
The number of grams of excess reactant leftover at the end of the reaction is 54.2 g.
To determine the grams of excess reactant leftover, we need to first calculate the theoretical yield of the reaction using the given amounts of reactants.
Given:
Mass of reactant P = 75.0 g
Mass of chlorine gas = 20.8 g
We need to compare the stoichiometric ratios of the reactants based on the balanced chemical equation to determine the limiting reactant. Unfortunately, the balanced chemical equation is not provided in the question. Therefore, it is not possible to determine the limiting reactant and calculate the theoretical yield.
Without the balanced chemical equation, we cannot accurately determine the grams of excess reactant leftover. The amount of excess reactant depends on the stoichiometry of the reaction, which requires the balanced equation.
Therefore, based on the given information, it is not possible to determine the grams of excess reactant leftover.
Learn more about reactant: https://brainly.com/question/6421464
#SPJ11
identifying parts of the scientific method
Observation, hypothesis, experiment, data analysis, conclusion, replication, publication, critical thinking, objectivity, iteration.
What are the parts of the scientific method?The scientific method consists of several key components that enable the systematic investigation of phenomena. Firstly, it involves making observations and asking questions about the natural world. These questions lead to the formulation of hypotheses, which are testable explanations for the observed phenomena
. The next step is designing and conducting experiments or gathering data to collect empirical evidence. The gathered data is then analyzed and interpreted to draw conclusions. These conclusions are used to either support or reject the initial hypotheses. The scientific method also emphasizes the importance of replicating experiments and results to ensure reliability.
Additionally, it promotes the dissemination of findings through peer-reviewed publications, enabling the scientific community to evaluate and build upon existing knowledge. Critical thinking, objectivity, and openness to revising conclusions are integral to the scientific method's iterative nature.
Learn more about components
brainly.com/question/30324922
#SPJ11
a metal complex absorbs light mainly at 420 nm. what is the color of the complex?
The colour of a metal complex that absorbs light mainly at 420 nm is yellow. The absorption of light at this wavelength corresponds to the complementary colour of yellow, which is violet or purple.
When light passes through a medium, it can be absorbed by certain substances, and this absorption is wavelength-dependent. In the case of yellow light, which has a specific wavelength, the complementary colour corresponds to the wavelength that is absorbed by the substance in question. Since yellow light has a longer wavelength, the complementary colour is on the opposite end of the visible light spectrum, where violet or purple light resides. When yellow light encounters a material that absorbs light at its specific wavelength, it appears as though violet or purple light is being reflected back, giving the perception of the complementary colour. This phenomenon is known as complementary colour absorption. The colour of a metal complex is determined by the wavelengths of light it absorbs. When a metal complex absorbs light, it promotes electrons from lower energy levels to higher energy levels. The absorbed light corresponds to a specific wavelength, which in turn determines the colour observed. In this case, the metal complex absorbs light predominantly at 420 nm, which lies in the violet or purple region of the visible spectrum. According to the concept of complementary colours, the colour observed is the opposite of the absorbed wavelength. Complementary colours are pairs of colours that, when combined, produce white light.
To learn more about Spectrum, click here: brainly.com/question/31086638
#SPJ11
Hot expanding gases can be used to perform useful work in a cylinder fitted with a moveable piston. If the temperature of a gas confined to such a cylinder is raised from 245 degrees C to 605 degrees C, what is the ratio of the initial volume to the final volume if the pressure exerted on the gas remains constant?
the ratio of initial volume to final volume, assuming constant pressure, is approximately 0.589
What is Constant Pressure?
When pressure is constant See answer Advertisement zubi4 Pressure law states: "For a fixed mass of gas, at a constant volume, the pressure (p) is directly proportional to the absolute temperature (T)." Pressure ∝ Temperature Pressure/ Temperature= constant
To find the ratio of the initial volume to the final volume when the temperature of the gas enclosed in the cylinder is increased from 245 degrees Celsius to 605 degrees Celsius, assuming the pressure remains constant, we can use the combined gas law.
The combined gas law states the initial and final states of a gas at constant pressure. It can be expressed as:
(V₁ / T₁) = (V₂ / T₂
Where V₁ and T₁ are the initial volume and temperature and V₂ and T₂ are the final volume and temperature.
With regard to it regarding to it:
T₁ = 245 degrees Celsius = 245 + 273.15 = 518.15 K
T₂ = 605 degrees Celsius = 605 + 273.15 = 878.15 K
Since the pressure is constant, we can rewrite the combined gas law as:
V₁ / T₁ = V₂ / T₂
Rearranging the equation to solve for the ratio of initial volume to final volume (V₁ / V₂):
V₁ / V₂ = T₁/ T₂
Enter the values:
V₁ / V₂ = 518.15K / 878.15K
Calculation of the ratio:
V₁ / V₂ ≈ 0.589
Therefore, the ratio of initial volume to final volume, assuming constant pressure, is approximately 0.589.
To learn more about Constant Pressure from the given link
https://brainly.com/question/24818722
#SPJ4
Conversion of 1 mol of acetyl-CoA to 2 mol of CO2 and CoA via the citric acid cycle results in the net production of:
a. 1 mol of citrate.
b. 1 mol of FADH2.
c. 1 mol of NADH.
d. 1 mol of oxaloacetate.
e. 7 mol of ATP.
The net production of 1 mol of acetyl-CoA to 2 mol of CO2 and CoA via the citric acid cycle results in the production of 1 mol of oxaloacetate. (D)
This is because oxaloacetate condenses with acetyl-CoA to form citrate, which then undergoes several reactions, producing energy in the form of ATP, reducing equivalents (NADH and FADH2), and regenerating oxaloacetate.
The citric acid cycle, also known as the Krebs cycle, is a sequence of chemical reactions that occurs in the mitochondria of cells. The cycle starts with the entry of acetyl-CoA and ends with the production of CO2, ATP, and reducing equivalents (NADH and FADH2).
Acetyl-CoA is first converted to citrate, which is then converted to isocitrate. Isocitrate undergoes oxidative decarboxylation, producing α-ketoglutarate and CO2. α-Ketoglutarate is then converted to succinyl-CoA, which is converted to succinate, fumarate, and malate, respectively.
Malate is then oxidized to produce oxaloacetate, which can condense with another acetyl-CoA to start the cycle again.The cycle produces a net yield of 1 ATP, 3 NADH, 1 FADH2, and 1 oxaloacetate for each acetyl-CoA that enters the cycle.
The NADH and FADH2 produced by the cycle are then used in oxidative phosphorylation to generate ATP, which is the main source of energy for the cell.(D)
To know more about mitochondria click on below link:
https://brainly.com/question/14740753#
#SPJ11
how to conduct a formal test for lack of fit of the regression model; use α=0.01 in r
By following these steps and performing the necessary calculations with the specified α=0.01 in R, you can conduct a formal test for lack of fit of the regression model and draw a conclusion based on the comparison of the calculated F-statistic and critical F-value.
To conduct a formal test for lack of fit of a regression model, you can follow these steps using the significance level α=0.01:
1. State the hypotheses:
Null hypothesis: The regression model fits the data well, and any deviation from the model is due to random chance or measurement error.
Alternative hypothesis (Ha): The regression model does not fit the data well, and there is a lack of fit.
2. Calculate the residual sum of squares (SSR) by obtaining the residuals (the differences between the observed and predicted values) from the regression model and squaring and summing them.
3. Calculate the pure error sum of squares (SSE) by partitioning the total sum of squares (SST) into the explained sum of squares (SSE) and the residual sum of squares (SSR). SSE represents the variability within each group or category in the data.
4. Calculate the degrees of freedom (df) for both SSR and SSE. The df for SSR is the number of data points minus the number of model parameters, and the df for SSE is the total number of observations minus the number of data points and the number of model parameters.
5. Calculate the mean square for both SSR and SSE by dividing the sum of squares by their respective degrees of freedom.
6. Conduct an F-test by comparing the mean square for SSR to the mean square for SSE. Calculate the F-statistic using the formula F = (MSR / MSE), where MSR is the mean square for SSR and MSE is the mean square for SSE.
7. Determine the critical value for the F-distribution with the given significance level α=0.01 and the appropriate degrees of freedom for SSR and SSE. You can use statistical software or tables to find the critical value.
8. Compare the calculated F-statistic to the critical value. If the calculated F-statistic is greater than the critical value, reject the null hypothesis and conclude that there is a lack of fit in the regression model. If the calculated F-statistic is not greater than the critical value, fail to reject the null hypothesis and conclude that there is no significant lack of fit.
Learn more about regression analysis here:
https://brainly.com/question/28178214
#SPJ4
what is the percent composition of nitrogen in sodium nitride (nan3)?
The percent composition of nitrogen in sodium nitride is approximately 16.87%.
How to find the percentage compositionThe percent composition of nitrogen in sodium nitride (Na₃N) can be calculated by determining the molar mass of nitrogen and the molar mass of the compound as a whole.
molar mass
molar mass of nitrogen = 14.01 grams
molar mass of sodium nitride = (3 * molar mass of Na) + (1 * molar mass of N)
molar mass of sodium nitride = (3 * 22.99 g/mol) + (1 * 14.01 g/mol)
molar mass of sodium nitride = 82.98 g/mol
percent composition of nitrogen
Percent composition of nitrogen = (molar mass of N / molar mass of Na₃N) * 100
Percent composition of nitrogen = (14.01 g/mol / 82.98 g/mol) * 100
Percent composition of nitrogen = 16.87%
Therefore, the percent composition of nitrogen in sodium nitride is approximately 16.86%.
Learn more about percent composition at
https://brainly.com/question/17021926
#SPJ4
Why is the concentration of lactate not nero during the resting state?
Lactate is a necessary intermediate in glycolysis
The equilibrium for the lactate dehydrogenase reaction favors lactate formation.
When oxygen is plentiful, conversion of pyruvate to lactate is favored over pyruvate's entry into the citric acid cycle
Lactate is the product of multiple metabolic pathways
Lactate concentration is not zero during the resting state because it is a necessary intermediate in glycolysis.
Lactate is a carboxylate with a C3H5O3 formula that acts as an intermediate in a variety of metabolic processes. It is created when pyruvate molecules generated by glycolysis are lowered to lactate in the cytoplasm under anaerobic conditions, such as when an insufficient quantity of oxygen is available.
The lactate dehydrogenase enzyme catalyzes this reversible chemical reaction.Numerous factors can result in increased lactate concentration, including lactate production, decreased clearance, or a combination of both factors.Concentration of lactate is not zero during the resting state because it is a necessary intermediate in glycolysis, and the in the resting state the equilibrium for the lactate dehydrogenase reaction favors lactate formation.
When oxygen is plentiful, the conversion of pyruvate to lactate is favored over pyruvate's entry into the citric acid cycle. Lactate is also the product of multiple metabolic pathways, indicating that it is produced even when no muscular activity is occurring. In conclusion, lactate concentration is not zero during the resting state because lactate is a necessary intermediate in glycolysis and is produced even when no muscular activity is occurring.
#SPJ11
which of the following aqueous mixtures would be a buffer system?
A) HCl, NaCl
B)HNO3, NaNO3
C) H3PO4, H2PO4-
D) H2SO4, CH3COOH
E) NH3, NaOH
A buffer system is a solution that resists changes in pH when an acid or base is added to it. The two components of a buffer system are a weak acid and its conjugate base or a weak base and its conjugate acid. Option C, H3PO4, H2PO4-, is a buffer system.
In general, the buffer system's pH is equal to the pKa of the weak acid component of the buffer. Let's see which of the given aqueous mixtures would be a buffer system. Option (C) H3PO4, H2PO4- would be a buffer system. Here's why: Phosphoric acid (H3PO4) is a triprotic acid, meaning that it has three ionizable hydrogen atoms. H2PO4− is the conjugate base of H3PO4, and its negative charge comes from the removal of one of H3PO4's hydrogen ions. The Ka values for H3PO4 are as follows: Ka1= 7.5 x 10^-3Ka2= 6.2 x 10^-8Ka3= 4.8 x 10^-13.
The pH of the buffer system will be pKa + log([A-]/[HA]), where A- is the concentration of the conjugate base and HA is the concentration of the weak acid.H3PO4 has a pKa value of 2.16, which is the average of its three Ka values. When H3PO4 dissociates, it produces H+ ions and H2PO4- ions, which will serve as the conjugate base. Since H2PO4- is a weak acid, it can act as a proton acceptor and counteract the effects of an added acid to the solution. As a result, option C, H3PO4, H2PO4-, is the correct option for a buffer system among the given aqueous mixtures.
know more about buffer system,
https://brainly.com/question/3435382
#SPJ11
what is the mass % of carbon in dimethylsulfoxide (c2h6so) rounded to three significant figures? group of answer choices 7.74 78.1 28.6 25.4 30.7
Dimethylsulfoxide has the formula C2H6SO.Therefore, the correct answer is option D: 25.4.
Option D.
To determine the mass percent of carbon in this compound, we need to calculate the molar mass of the compound first. Molar mass is the sum of the atomic masses of all the atoms in the molecule. We can use the periodic table to obtain the atomic masses. For this compound, the molar mass will be:2 (atomic mass of carbon) + 6 (atomic mass of hydrogen) + 32 (atomic mass of sulfur + 16 (atomic mass of oxygen) = 78 g/molNext, we need to determine the mass of carbon in one mole of the compound. We can do this by multiplying the number of carbon atoms by the atomic mass of carbon. In this case, there are 2 carbon atoms in one mole of the compound. Therefore, the mass of carbon in one mole of the compound is:2 (number of carbon atoms) x 12.01 (atomic mass of carbon) = 24.02 g/molFinally, we can calculate the mass percent of carbon in dimethylsulfoxide using the formula:mass percent of carbon = (mass of carbon / total molar mass) x 100%Substituting the values we obtained:mass percent of carbon = (24.02 g/mol / 78 g/mol) x 100% = 30.77%Rounding to three significant figures gives us a final answer of 30.7%.
Option D.
For more questions on Dimethylsulfoxide
https://brainly.com/question/10914338
#SPJ8
a net yield of atp would be produced from the conversion of three molecules of glucose into pyruvate.
The conversion of three molecules of glucose into pyruvate yields a net yield of ATP.The conversion of three molecules of glucose into pyruvate yields a net yield of ATP. This process is known as glycolysis and it takes place in the cytoplasm of cells.
The entire process of glycolysis has two parts, the preparatory phase and the payoff phase. During the preparatory phase, glucose is split into two pyruvate molecules, while in the payoff phase, four ATP molecules are synthesized. Two ATP molecules are utilized during the preparatory phase to convert glucose into two molecules of glyceraldehyde 3-phosphate. This is also accompanied by the reduction of two molecules of NAD+ to NADH. During the payoff phase, each molecule of glyceraldehyde 3-phosphate is converted into a molecule of pyruvate. A total of four ATP molecules are produced during the payoff phase, while two molecules of NADH are formed. Overall, the conversion of one molecule of glucose into two molecules of pyruvate yields a net of two ATP molecules, two molecules of NADH, and two molecules of pyruvate. Thus, the conversion of three molecules of glucose into pyruvate yields a net yield of six ATP molecules, six molecules of NADH, and six molecules of pyruvate.
To know more about molecules visit:
https://brainly.com/question/32243749
#SPJ11
in which compound does oxygen have an oxidation number other than −2? select the correct answer below: co2 h2o h3po4 h2o2
Out of the compounds listed below, the compound in which oxygen has an oxidation number other than −2 is H₂O₂. The correct option is (d)H₂O₂.
Oxidation number can be described as the number that is given to an atom of an element when it combines with other atoms. It is assigned to an atom of an element in a particular compound, which shows its ability to either donate or accept electrons when it reacts with other atoms.
The oxidation number of an atom in a molecule indicates the electron sharing that occurs in chemical bonds. The general rules for determining the oxidation number of an atom are: In an uncombined or elemental state, atoms have an oxidation number of 0.
Ions' oxidation numbers are the same as their charges. Oxygen in most of the compounds has an oxidation state of -2 except in peroxides, where it has an oxidation state of -1. In H₂O₂, the oxygen atoms have an oxidation number of -1. Hence, H₂O₂ is the only compound from the given options where oxygen has an oxidation number other than −2. Hence, d is the correct option.
You can learn more about oxidation numbers at: brainly.com/question/29100691
#SPJ11
Which of the following statement is true for a 0.10 M solution of a weak acid HA at 25°C?
A. pH of solution = 1.00
B. [HA] >> [A− ]
C. [HA] = [A− ]
D. [HA] = [H+ ]
E. [A− ] >> [OH− ]
For a 0.10 M solution of a weak acid HA at 25°C, the true statement is [HA] = [H+]. Therefore the correct answer is option D.
The weak acid partly dissociates in a weak acid solution, releasing hydrogen ions (H+) and the conjugate base (A-). Only at equilibrium is the concentration of the undissociated weak acid, [HA], equal to the concentration of hydrogen ions, [H+]. As a result, the concentration of undissociated acid [HA] in a 0.10 M solution of a weak acid HA is equal to the concentration of hydrogen ions [H+]. This presupposes that the weak acid is the solution's only substantial source of hydrogen ions.
Option A (solution pH = 1.00) is incorrect because the pH of a 0.10 M solution of a weak acid would generally be higher than 1.00 due to the weak acid's incomplete dissociation.
Options B ([HA] >> [A-]), C ([HA] = [A-]), and E ([A-] >> [OH-]) are incorrect since they do not adequately describe the behaviour of a weak acid solution. In such solutions, the concentrations of the weak acid and its conjugate base are generally comparable. In contrast, hydroxide ions [OH-] concentration is generally significantly lower than that of the weak acid or its conjugate base.
To know more about acid HA
brainly.com/question/31491723
in the electrolysis of water, how long will it take to produce 250.0 l of h2 at 1.0 atm and 273 k using an electrolytic cell through which the current is 113.0 ma?
The required Correct answer is it will take 1.96 hours or 118 minutes to produce 150 L of H2 at 1.0 atm and 273 K using an electrolytic cell through which the current is 113.0 mA.
Given,Volume of hydrogen = 250.0 l
Pressure of hydrogen = 1.0 atm
Temperature of hydrogen = 273 K
Electrical current = 113.0 mA
We have to calculate the time required to produce 150 L of H2.
Explanation: In the electrolysis of water, the volume of H2 produced is directly proportional to the amount of electricity passed through the cell. The amount of electricity is usually measured in coulombs and can be calculated by multiplying the current by the time in seconds (Q = It).
The number of moles of hydrogen gas produced can be calculated using the ideal gas law equation:P.V = n.R.TwhereP = pressure of hydrogen gas in atmV = volume of hydrogen gas in Ln = number of moles of hydrogen gasR = gas constantT = temperature of hydrogen gas in Kelvins R = 0.0821 atm L mol¯¹K¯¹n = PV/RT
The number of moles of hydrogen gas produced is proportional to the amount of electricity passed through the cell.n = (zF)/2wherez = the number of electrons per hydrogen molecule that is oxidized or reduced in the cellz = 2F = Faraday constant = 96500 C mol¯¹n = (zF/2) = (1 mol e¯ / 96500 C)(Q)
The time required to produce a given volume of H2 can be calculated using the following formula:t = (150 L) (96500 C/mol e¯ )/ (2 F × 1 A × 3600 s/h × 1.0 L) = 1.96 h or 118 min.
Therefore, it will take 1.96 hours or 118 minutes to produce 150 L of H2 at 1.0 atm and 273 K using an electrolytic cell through which the current is 113.0 mA.
Learn more about electrolysis of water here https://brainly.in/question/20831057
#SPJ11
determine the molecular formulas for compounds having the following empirical formula and molar mass: c4h10n; experimental molar mass 288 g/mol
The empirical formula is C₄H₁₀N, while the experimental molar mass is 288 g/mol. The molecular formula of the given compound is C₁₂H₃0N₃.
The molar mass of the empirical formula is given by adding the atomic masses of each element in the empirical formula.
Mass of carbon = 4 × 12.01 g/mol = 48.04 g/mol
Mass of hydrogen = 10 × 1.01 g/mol = 10.10 g/mol
Mass of nitrogen = 1 × 14.01 g/mol = 14.01 g/mol
The total mass of all the elements in the empirical formula = 48.04 + 10.10 + 14.01 = 72.15 g/mol
This indicates that the empirical formula weight is 72.15 g/mol.
To calculate the molecular formula, you divide the experimental molar mass by the empirical formula weight to find the number of empirical formula units that make up the molecular formula. The molecular formula is given by multiplying the empirical formula by this number. That is,
Mass of molecular formula = Experimental molar mass / Empirical formula weight
= 288 / 72.15 = 3
Multiplying the empirical formula by 3, we get the molecular formula.
C₄H₁₀N × 3 = C₁₂H₃0N₃
You can learn more about empirical formulas at: brainly.com/question/32125056
#SPJ11
identify bronsted-lowry conjugate acid-base pair
A. NH3 , NH4+
B. H30+ , OH-
C. HCl , HBr
D. ClO4- , ClO3-
The Bronsted-lowry conjugate acid-base pair is NH₃/NH₄⁺ and H₃O⁺/OH⁻ .
The Bronsted-Lowry conjugate acid-base pairs can be identified by examining which species donates or accepts a proton. In the given options:
A. NH₃ is a base as it can accept a proton (H⁺) to form NH₄⁺, which is its conjugate acid.
Therefore, the conjugate acid-base pair is NH₃/NH₄⁺.
B. H₃O⁺ is an acid as it donates a proton (H+) to form OH-, which is its conjugate base.
Therefore, the conjugate acid-base pair is H₃O⁺/OH⁻.
C. HCl and HBr are not related as a conjugate acid-base pair since neither species donates or accepts a proton from the other.
D. ClO₄⁻ and ClO₃⁻ are not related as a conjugate acid-base pair since neither species donates or accepts a proton from the other.
Learn more about the Bronsted-Lowry theory here:
https://brainly.com/question/31823770
#SPJ4
Which statement about nitrous acid and nitric acid is correct? They are both weak acids. They are both strong acids. They both have one ionizable proton. Nitrous acid has the formula HNO_3. Nitric acid has the formula HNO_2
Nitrous acid (HNO2) is a weak acid, while nitric acid (HNO3) is a strong acid.
Nitrous acid (HNO2) is a weak acid because it only partially dissociates in water to release hydrogen ions (H+). The equilibrium reaction for the dissociation of nitrous acid can be represented as:
HNO2 ⇌ H+ + NO2-
Nitric acid (HNO3), on the other hand, is a strong acid. It fully dissociates in water to release hydrogen ions. The dissociation reaction of nitric acid is:
HNO3 → H+ + NO3-
The strength of an acid refers to the extent of its dissociation in water. Weak acids only partially dissociate, while strong acids completely dissociate.
The correct statement is that nitrous acid (HNO2) is a weak acid, while nitric acid (HNO3) is a strong acid.
To know more about Nitrous, visit:
https://brainly.com/question/30570662
#SPJ11
given that e o = 0.52 v for the reduction cu (aq) e− → cu(s), calculate e o , δg o , and k for the following reaction at 25°c: 2cu (aq) ⇌ cu2 (aq) cu(s)
The E⁰, ΔG⁰ and K for the reaction 2Cu(aq) ⇌ Cu²⁺(aq) + Cu(s) is 1.04 V, -200,630 J/mol and 1.108 x 10³⁵ repectively.
To calculate E⁰, ΔG⁰, and K for the given reaction at 25°C, we can use the Nernst equation and the relationship between ΔG⁰, K, and E⁰.
The Nernst equation relates the cell potential (E) to the standard cell potential (E₀) and the reaction quotient (Q) as follows:
E = E⁰ - (RT / nF)ln(Q)
Where:
E = Cell potential
E⁰ = Standard cell potential
R = Gas constant (8.314 J/(mol·K))
T = Temperature in Kelvin
n = Number of electrons transferred in the reaction
F = Faraday's constant (96485 C/mol)
ln = Natural logarithm
Q = Reaction quotient
The relationship between ΔG⁰, K, and E⁰ is given by:
ΔG⁰ = -nFE⁰
[tex]K = e^{(- \triangle G^0/ (RT))}[/tex]
Let's calculate the values:
Given:
E⁰ = 0.52 V for the reduction Cu(aq) + e⁻ → Cu(s)
1. E⁰ for the reaction 2Cu(aq) ⇌ Cu²⁺(aq) + Cu(s):
Since the reaction involves the transfer of 2 electrons, the E₀ for the reaction will be:
E₀ = 2(0.52 V)= 1.04 V
2. ΔG⁰:
ΔG⁰ = -nFE⁰
Since the reaction involves the transfer of 2 electrons, n = 2.
ΔG⁰ = -2(96485 C/mol)(1.04 V)
ΔG⁰ = -200,630 J/mol
3. K:
[tex]K = e^{(- \triangle G^0/ (RT))}[/tex]
T = 25°C = 298 K
[tex]K = e^{\frac {(-200,630 J/mol)}{(8.314 J/(molK)298 K)}}[/tex])
[tex]K \approx e^{(80.37)} \approx 1.108 \times 10^35[/tex]
Learn more about electrode potential here:
https://brainly.com/question/31872210
#SPJ4
How much 4-mEq/mL sodium chloride must be drawn up for a 28-mEq dose?
A 6.7 mL
B. 6.8 mL
C. 7.0 mL
D. 8.6 mL
To draw up a 28-mEq dose of sodium chloride at a concentration of 4-mEq/mL, you would need to draw up C" 7.0 mL.
To determine the amount of sodium chloride needed, you can use the formula:
Volume = Dose / Concentration
In this case, the dose is 28 mEq and the concentration is 4 mEq/mL. By substituting these values into the formula, we get:
Volume = 28 mEq / 4 mEq/mL = 7 mL
Therefore, you would need to draw up 7.0 mL of the 4-mEq/mL sodium chloride solution to obtain a 28-mEq dose.
Option C is the correct answer.
You can learn more about sodium chloride at
https://brainly.com/question/24878544
#SPJ11
the chemist adds m silver nitrate solution to the sample until silver chloride stops forming. he then washes, dries, and weighs the precipitate. he finds he has collected of silver chloride. calculate the concentration of iron(iii) chloride contaminant in the original groundwater sample.
The concentration of iron(iii) chloride contaminant in the original groundwater sample is (C1 × V1 / V) × 162.2 g/mol.
Given that the chemist adds m silver nitrate solution to the sample until silver chloride stops forming. He then washes, dries, and weighs the precipitate. He finds he has collected of silver chloride. Let us calculate the concentration of iron(iii) chloride contaminant in the original groundwater sample.Calculating the concentration of iron(iii) chloride contaminant in the original groundwater sample
Here is the given information;
Mass of silver chloride precipitate = m grams
Volume of groundwater sample taken = V ml
Volume of AgNO3 solution used = V1 ml
Concentration of AgNO3 solution = C1
Molar Mass of AgCl precipitated = 143.5 g/mol
The molarity of AgNO3 solution is given as;
Molarity of AgNO3 = Number of equivalents / Volume of solution in liters
We know that 1 mole of AgNO3 gives 1 mole of AgCl, i.e., AgNO3 is equivalent to AgCl.Therefore, the number of equivalents of AgNO3 is the same as the number of equivalents of AgCl.
Number of equivalents of AgNO3 = C1 × V1
Number of equivalents of AgCl = m / 143.5 g/mol
Concentration of FeCl3 = (Number of equivalents of FeCl3 / Volume of sample in liters) × Molar mass of FeCl3
Number of equivalents of FeCl3 = Number of equivalents of AgNO3
Number of equivalents of FeCl3 = C1 × V1
Concentration of FeCl3 = (C1 × V1 / V) × Molar mass of FeCl3
Concentration of FeCl3 = (C1 × V1 / V) × 162.2 g/mol
Hence, the concentration of iron(iii) chloride contaminant in the original groundwater sample is (C1 × V1 / V) × 162.2 g/mol.
To know more about contaminant visit:
https://brainly.com/question/28328202
#SPJ11
Write the balanced COMPLETE ionic equation for the reaction when aqueous MgSO₄ and aqueous Ba(NO₃)₂ are mixed in solution to form aqueous Mg(NO₃)₂ and solid BaSO₄. If no reaction occurs, simply write only NR. Be sure to include the proper phases for all species within the reaction.
The complete balanced ionic equation is Mg2+ (aq) + SO42- (aq) + Ba2+ (aq) + 2NO3- (aq) → BaSO4 (s) + Mg(NO3)2 (aq).
When aqueous magnesium sulfate, MgSO4 and aqueous barium nitrate, Ba(NO3)2 are mixed in solution to form aqueous magnesium nitrate, Mg(NO3)2 and solid barium sulfate, BaSO4, the complete balanced ionic equation is given by;Mg2+ (aq) + SO42- (aq) + Ba2+ (aq) + 2NO3- (aq) → BaSO4 (s) + Mg(NO3)2 (aq)The balanced chemical equation isMgSO4(aq) + Ba(NO3)2(aq) → BaSO4(s) + Mg(NO3)2(aq)The net ionic equation for the reaction is;Mg2+(aq) + Ba2+(aq) + SO42-(aq) + 2NO3-(aq) → BaSO4(s) + Mg2+(aq) + 2NO3-(aq)The complete balanced ionic equation is Mg2+ (aq) + SO42- (aq) + Ba2+ (aq) + 2NO3- (aq) → BaSO4 (s) + Mg(NO3)2 (aq).
Learn more about balanced ionic equation here:
https://brainly.com/question/30829793
#SPJ11
select+the+correct+answer.+what+is+the+percent+composition+of+silicon+in+silicon+carbide+(sic)?+a.+28%+b.+50%+c.+70%+d.+142%
The percentage composition of Silicone in the given compound is 70% (Option C).
To determine the percent composition of silicon in silicon carbide (SiC), we need to calculate the mass of silicon in the compound relative to the total mass of the compound.
The molar mass of SiC can be calculated as follows:
Molar mass of SiC = (atomic mass of Si) + (atomic mass of C)
Molar mass of SiC = 28.0855 g/mol + 12.0107 g/mol
Molar mass of SiC ≈ 40.0962 g/mol
To calculate the percent composition of silicon, we need to divide the molar mass of silicon by the molar mass of SiC and multiply by 100%:
Percent composition of silicon = (molar mass of Si / molar mass of SiC) * 100%
Percent composition of silicon = (28.0855 g/mol / 40.0962 g/mol) * 100%
Percent composition of silicon ≈ 70%
Therefore, the percent composition of silicon in silicon carbide (SiC) is approximately 70%. The correct answer is C. 70%.
The correct question is:
What is the percent composition of silicon in silicon carbide (SiC)? A. 28% B. 50% C. 70% D. 142%
To know more about Silicone follow the link:
https://brainly.com/question/28213172
#SPJ4
A voltaic cell is constructed in which the anode is a Fe2+|Fe3+ half cell and the cathode is a Br-|Br2 half cell. The half-cell compartments are connected by a salt bridge.
(Use the lowest possible coefficients. Use the pull-down boxes to specify states such as (aq) or (s). If a box is not needed, leave it blank.)
The anode reaction is:
(aq)(s)(l)(g) + (aq)(s)(l)(g) -----> (aq)(s)(l)(g) + (aq)(s)(l)(g)
The cathode reaction is:
(aq)(s)(l)(g) + (aq)(s)(l)(g) --------> (aq)(s)(l)(g) + (aq)(s)(l)(g)
The net cell reaction is:
(aq)(s)(l)(g) + (aq)(s)(l)(g) ------> (aq)(s)(l)(g) + (aq)(s)(l)(g)
In the external circuit, electrons migrate _____(from/to) the Fe2+|Fe3+ electrode _____(from/to) the Br-|Br2 electrode.
In the salt bridge, anions migrate _____(from/to) the Br-|Br2 compartment _____(from/to) the Fe2+|Fe3+ compartment.
#2
A voltaic cell is constructed in which the following cell reaction occurs. The half-cell compartments are connected by a salt bridge.
I2(s) + Pb(s) --->2I-(aq) + Pb2+(aq)
The anode reaction is:
(aq)(s)(l)(g) + (aq)(s)(l)(g) ------> (aq)(s)(l)(g) + (aq)(s)(l)(g)
The cathode reaction is:
(aq)(s)(l)(g) + (aq)(s)(l)(g) ------> (aq)(s)(l)(g) + (aq)(s)(l)(g)
In the external circuit, electrons migrate _____(from/to) the Pb|Pb2+ electrode _____(from/to) the I-|I2 electrode.
In the salt bridge, anions migrate _____(from/to) the Pb|Pb2+ compartment _____(from/to) the I-|I2 compartment.
The anode reaction in the Fe₂+|Fe₃+ half-cell is: Fe₂+ (aq) + Fe₃+ (aq) -> Fe₃+ (aq) + Fe₂+ (aq) The cathode reaction in the Br-|Br₂ half-cell is:
Br₂ (aq) + 2e- -> 2Br- (aq)
The net cell reaction is Fe₂+ (aq) + Br₂ (aq) -> Fe₃+ (aq) + 2Br- (aq)
In the external circuit, electrons migrate from the Fe₂+|Fe₃+ electrode to the Br-|Br₂ electrode.
In the salt bridge, anions migrate from the Br-|Br₂ compartment to the Fe₂+|Fe₃+ compartment.
The anode reaction is: Pb (s) -> Pb₂+ (aq) + 2e-
The cathode reaction is: I₂ (s) + 2e- -> 2I- (aq)
In the external circuit, electrons migrate from the Pb|Pb₂+ electrode to the I-|I₂ electrode.
In the salt bridge, anions migrate from the I-|I₂ compartment to the Pb|Pb₂+ compartment.
To know more about the salt bridge:
https://brainly.com/question/2861410
#SPJ4