PLEASE HELP ME WITH THIS ONE QUESTION

Answer: Geothermal energy is produced by the heat of Earth's molten interior. This energy is harnessed to generate electricity when water is injected deep underground and returns as steam (or hot water, which is later converted to steam) to drive a turbine on an electric power generator.

Explanation: Hope this helps!

Answer:

The impulse delivered to the ball is [tex]Imp = \left(-3.941, 1.975\right)\,\left[\frac{kg\cdot m}{s} \right][/tex].

Explanation:

By Impulse Theorem, the motion of the tennis ball is modelled after the following expression:

[tex]Imp = m\cdot (\vec v_{f} - \vec v_{o})[/tex] (1)

Where:

[tex]m[/tex] - Mass of the ball, in kilograms.

[tex]\vec v_{o}[/tex] - Vector of the initial velocity, in meters per second.

[tex]\vec v_{f}[/tex] - Vector of the final velocity, in meters per second.

[tex]Imp[/tex] - Impulse, in meters per second.

If we know that [tex]m = 0.06\,kg[/tex], [tex]\vec v_{o} = \left(45\,\frac{m}{s} \right)\cdot (\cos 47^{\circ}, \sin 47^{\circ})[/tex] and [tex]\vec v_{f} = \left(35\,\frac{m}{s} \right)\cdot (-1, 0)[/tex], then the impulse delivered to the ball is:

[tex]Imp = (0.06\,kg)\cdot \left[\left(35\,\frac{m}{s} \right)\cdot (-1,0) -\left(45\,\frac{m}{s} \right)\cdot (\cos 47^{\circ}, \sin 47^{\circ})\right][/tex]

[tex]Imp = (0.06\,kg)\cdot (-65.670, -32.911)\,\left[\frac{m}{s} \right][/tex]

[tex]Imp = \left(-3.941, 1.975\right)\,\left[\frac{kg\cdot m}{s} \right][/tex]

The impulse delivered to the ball is [tex]Imp = \left(-3.941, 1.975\right)\,\left[\frac{kg\cdot m}{s} \right][/tex].

Answer:

Explanation:

Given that:

Focal length for the objective lens = 20 mm, 4 mm, 1.4 mm

For objective lens of focal length f₁ = 20 mm

s₁' = 120 mm + 20 mm = 140 mm

∴

Magnification [tex]m_1 = \dfrac{s'_1}{f_1}[/tex]

[tex]m_1 = \dfrac{140}{20}[/tex]

[tex]m_1 = 7 \ m[/tex]

For objective lens of focal length f₁ = 4 mm

s₁' = 120 mm + 4 mm = 124 mm

[tex]m_1 = \dfrac{s'_1}{f_1}[/tex]

[tex]m_1 = \dfrac{124}{4}[/tex]

[tex]m_1 = 31 \ m[/tex]

For objective lens of focal length f₁ = 1.4 mm

s₁' = 120 mm + 1.4 mm = 121.4 mm

[tex]m_1 = \dfrac{s'_1}{f_1}[/tex]

[tex]m_1 = \dfrac{121.4}{1.4}[/tex]

[tex]m_1 = 86.71 \ m[/tex]

The magnification of the eyepiece is given as:

[tex]m_e = 5X \ and \ m_e = 15X[/tex]

Thus, the largest angular magnification when  [tex]m_1 \ and \ m_e \ are \ large \ is:[/tex]

[tex]M_{large}= (m_1)_{large} \times (m_e)_{large}[/tex]

= 86.71 × 15

= 1300.65

The smallest angular magnification derived when [tex]m_1 \ and \ m_e \ are \ small \ is:[/tex]

[tex]M_{small}= (m_1)_{small} \times (m_e)_{small}[/tex]

= 7 × 5

= 35

The largest magnification will be 1300.65 and the smallest magnification will be 35.

Magnification is defined as the ratio of the size of the image of an object to the actual size of the object.

Now for objective lens and eyepieces, it is defined as the ratio of the focal length of the objective lens to the focal length of the eyepiece.

It is given in the question:

Focal lengths for the objective lens is = 20 mm, 4 mm, 1.4 mm

now we will calculate the magnification for all three focal lengths of the objective lens.

Also, each objective forms an image 120 mm beyond its second focal point.

(1) For an objective lens of focal length   [tex]f_1=20 \ mm[/tex]

[tex]s_1'=120\ mm +20 \ mm =140\ mm[/tex]

Magnification will be calculated as

[tex]m_1=\dfrac{s_1'}{f_1} =\dfrac{140}{20} =7[/tex]

(2) For an objective lens of focal length [tex]f_1= \ 4 \ mm[/tex]

s₁' = 120 mm + 4 mm = 124 mm

[tex]m_1=\dfrac{s_1'}{f_1} =\dfrac{124}{4} =31[/tex]

(3) For an objective lens of focal length [tex]f_1=1.4\ mm[/tex]

s₁' = 120 mm + 1.4 mm = 121.4 mm

[tex]m_1=\dfrac{s_1'}{f_1} =\dfrac{121.4}{1.4} =86.71[/tex]

Now the magnification of the eyepiece is given as:

[tex]m_e=5x\ \ \ & \ \ m_e=15x[/tex]

Thus, the largest angular magnification when  

[tex]m_1 = 86.17\ \ \ \ m_e=15x[/tex]

[tex]m_{large}= (m_1)_{large}\times (m_e)_{large}[/tex]

[tex]m_{large}=86.71\times 15=1300.65[/tex]

The smallest angular magnification derived when

[tex]m_1=7\ \ \ \ m_e=5[/tex]

[tex]m_{small}=(m_1)_{small}\times (m_e)_{small}[/tex]

[tex]m_{small}=7\times 5=35[/tex]

Thus the largest magnification will be 1300.65 and the smallest magnification will be 35.

To know more about magnification follow

https://brainly.com/question/1599771

Answer:

Δd = 7.22 10⁻² m

Explanation:

For this exercise we must use the dispersion relationship of a diffraction grating

           d sin θ = m λ

let's use trigonometry

           tan θ = y / L

how the angles are small

           tant θ = sinθ  /cos θ = sin θ

we substitute  

           sin θ = y / L

          d y / L = m λ

          y = m λ L / d

let's use direct ruler rule to find the distance between two slits

If there are 500 lines in 1 me, what distance is there between two lines

         d = 2/500

        d = 0.004 me = 4 10⁻⁶ m

diffraction gratings are built so that most of the energy is in the first order of diffraction m = 1

let's calculate for each wavelength

λ = 656 nm = 656 10⁻⁹ m

         d₁ = 1 656 10⁻⁹ 1.7 / 4 10⁻⁶

         d₁ = 2.788 10⁻¹ m

λ = 486 nm = 486 10⁻⁹ m

         d₂ = 1 486 10⁻⁹ 1.7 / 4 10⁻⁶

         d₂ = 2.066 10⁻¹ m

the distance between the two lines is

         Δd = d1 -d2

         Δd = (2,788 - 2,066) 10⁻¹

         Δd = 7.22 10⁻² m

Answer:

The product of mass and velocity is the correct answer

Explanation:

Momentum is defined as mass × velocity

p = mv

Answer:

The product of mass and velocity

Explanation:

I  just did it and got it right with a 100%

Posted 1/3/23

Answer:

the answer is B i hope it helps :)

[tex]\huge\color{purple}\boxed{\colorbox{black}{♡Answer}}[/tex]

B. The energy required to force two nuclei to undergo nuclear fusion. ✅

[tex]\large\mathfrak{{\pmb{\underline{\orange{Happy\:learning }}{\orange{!}}}}}[/tex]

Answer:

30.5°

Explanation:

Since the light travels horizontally through the prism, it undergoes minimum deviation. So, the angle between the direction of the incident ray and that of the outgoing ray D is gotten from

n = [sin(D + α)/2]/sin(α/2) where n = refractive index of prism = 1.42 and α = angle of prism = 60° (since it is a n equilateral glass prism).

Making D subject of the formula, we have

n = [sin(D + α)/2]/sin(α/2)

nsin(α/2) = [sin(D + α)/2]

(D + α)/2 = sin⁻¹[nsin(α/2)]

D + α = 2sin⁻¹[nsin(α/2)]

D = 2sin⁻¹[nsin(α/2)] - α

So, substituting the values of the variables into the equation, we have

D = 2sin⁻¹[nsin(α/2)] - α

D = 2sin⁻¹[1.42sin(60°/2)] - 60°

D = 2sin⁻¹[1.42sin(30°)] - 60°

D = 2sin⁻¹[1.42 × 0.5] - 60°

D = 2sin⁻¹[0.71] - 60°

D = 2(45.23°) - 60°

D = 90.46° - 60°

D = 30.46°

D ≅ 30.5°

Answer:

a)  [tex]V=7.5m/s[/tex]

b) [tex]rms=8.4m/s[/tex]

c) Generally the most probable speed is 8m/s as it the most posses by particles being the average

Explanation:

From the question we are told that:

Sample size N=15

  [tex]Speed 1 v_1=2m/s\\\\Speed 2 v_2=3m/s\\\\Speed 3 v_2=5m/s\\\\Speed 4 v_4=8m/s\\\\Speed 3 v_5=9m/s\\\\Speed 2 v_6=15m/s\\\\[/tex]

Generally the equation for Average speed is mathematically given by

 [tex]V_{avg}=\frac{\sum(nv)}{N}[/tex]

Therefore

 [tex]V_{avg}=\frac{(2+2(3)+3(5)+4(8)+3(9)+2(15))}{15}[/tex]

 [tex]V=7.5m/s[/tex]

b)

Generally the equation for RMS speed of the particle is mathematically given by

  [tex]rms=\sqrt{\frac{\sum(nv^2)}{N}}[/tex]

  [tex]rms=\sqrt{\frac{2^2+2(3)^2+3(5)^2+4(8)^2+3(9)^2+2(15)^2}{15}}[/tex]

  [tex]rms=\sqrt{69.73}[/tex]

  [tex]rms=8.4m/s[/tex]

c

Generally the most probable speed is 8m/s as it the most posses by particles being the average

(a) When the spring is compressed 4.5 cm = 0.045 m, it exerts a restoring force on the block of magnitude

F = (1900 N/m) (0.045 m) = 85.5 N

so that at the moment the block is released, this force accelerates the block with magnitude a such that

85.5 N = (1.15 kg) a   ==>   a = (85.5 N) / (1.15 kg) ≈ 74.3 m/s²

The block reaches its maximum speed at the spring's equilbrium point, and this speed v is such that

v ² = 2 (74.3 m/s²) (0.045 m)   ==>   v = √(2 (74.3 m/s²) (0.045 m)) ≈ 2.59 m/s

(b) There is no friction between the block and plane, so the block maintains this speed as it slides over the edge. At that point, it's essentially in free fall, so if y is the height of the plane, then

(7 m/s)² - (2.59 m/s)² = 2gy   ==>   y = ((7 m/s)² - (2.59 m/s)²) / (2g) ≈ 2.16 m

Answer:

Final velocity = 10 m/s

Time taken to travel 100 meter = 8.16 second (Approx.)

Explanation:

Given:

Acceleration = 2 m/s²

Initial velocity = 0 m/s

Find:

Velocity after 5 seconds

Time taken to travel 100 meter

Computation:

Using first equation of motion

v = u + at

v = 0 + (2)(5)

Final velocity = 10 m/s

Using Second equation of motion

s = ut + (1/2)(a)(t²)

100 = (0)(t) + (1/2)(3)(t²)

100 = (1/2)(2)(t²)

100  = (t²)

t = 10

Time taken to travel 100 meter = 8.16 second (Approx.)

Answer:

physical science is important

hety

civil engineering

Answer:

a) [tex]V=14.904m/s[/tex]

b) [tex]d = 191.49 m[/tex]

c) [tex]t= 25.696 s[/tex]

Explanation:

From the question we are told that:

Radius [tex]r =378m[/tex]

Acceleration [tex]a=0.580[/tex]

a)

Generally the  equation for speed of the car is mathematically given by

 [tex]a=\frac{v^2}{r}[/tex]

 [tex]V=\sqrt{a*r}[/tex]

 [tex]V=\sqrt{0.58*383}[/tex]

 [tex]V=14.904m/s[/tex]

b)

Generally the  equation for distance traveled of the car is mathematically given by

 [tex]V^2=u^2+2ad[/tex]

 [tex]d=\frac{V^2}{2a}[/tex]

 [tex]d=\frac{14.904^2}{2*0.58}[/tex]  

 [tex]d = 191.49 m[/tex]

c)

Generally the  equation for time of the car is mathematically given by

 [tex]V=u+at[/tex]

 [tex]t=\frac{V}{a}[/tex]

 [tex]t=\frac{14.904}{0.58}[/tex]

 [tex]t= 25.696 s[/tex]

570k or 1050k

270k+290k= 570k

270k•290k = 1050k

d. An object did work on the environment.

Work is defined in many contexts. Some of these are;

i. Work is the product of force and displacement. In this case, work done is positive if the force applied on an object or body and the displacement caused by the force are in the same direction. If instead the force and displacement are in opposite direction, then the work done will be negative. If it is the case the force and the displacement are perpendicular to each other, the work done is zero.

ii. In the first law of thermodynamics, the internal energy of a system is the sum of the work done and the heat exchanged between the system and the environment. Therefore, work done is the difference between the internal energy of a system and the heat exchanged between the system and the environment.

In this case, work is said to be positive if work is done by the system (object) on the environment. It is negative if work is done by the environment on the system (object).

Answer:

its c

Explanation:

Answer:

inertia

Explanation:

Answer:

Explanation:

Blue: 10/30

Red: 5/30

Yellow: 15/30

The probability of finding the blue red and yellow chips is 1/3, 1/6 and 1/2

The extent to which an event is likely to occur, measured by the ratio of the favorable cases to the whole number of cases possible.

Given that

Blue chips =10

Red chips = 5

Yellow chips = 15

Number of the total samples =10+15+5=30

Probability of choosing Blue chips = [tex]\dfrac{10}{30}= \dfrac{1}{3}[/tex]

Probability of Red chips =[tex]\dfrac{5}{30}=\dfrac{1}{6}[/tex]

Probability of Yellow chips =[tex]\dfrac{15}{30}=\dfrac{1}{2}[/tex]

Thus the probability of finding the blue red and yellow chips is 1/3, 1/6 and 1/2

To know more about probability follow

https://brainly.com/question/24756209

Answer: θ would equal approximately 28.7°

This is a kinematics problem, where one is only given the theta value 13.0° in regards to the range; thus, the problem is testing one's understanding of the relationships between the variables.

Range (aka x) = (v₀ sin (2θ₀))/g, where θ₀ = 13.0°

Now if we multiply the range by 2, we get:

2x = 2((v₀ sin (2θ₀))/g) → to verbalize, if range equates to (v₀ sin (2θ₀))/g, and doubling the range equals twice the product value, then:

2θ = sin⁻¹(2sin(2(13.0° )) = sin⁻¹(2(0.76255845048)) = sin⁻¹ (1.52511690096) = 57.35560850015109°/2 = θ

Thus, θ = 28.67780425

It's been awhile since I did this; though I hope it helped!

Answer:

Following are the solution to the given points:

Explanation:

For point a:

Find the schematic of the empty body and in attachment. Upon on ball during the pitch only two forces act:

The strength of the pitcher F is applied that operates horizontally. Its gravity force acting on an object is termed weight, which value is where m denotes mass, and g the acceleration of gravity.

For point b:

[tex]160.2\ N[/tex]

First, they must find that ball's acceleration. You can use the SUVAT equation to achieve that

where

[tex]v = 47\ \frac{m}{s} \\\\u = 0 \\\\a =?\\\\d = 1.0 \ m \\\\[/tex]

Solving for a,

[tex]a=\frac{v^2-u^2}{2d}=\frac{47^2-0}{2(1.0)}=1104.5 \ \frac{m}{s^2}[/tex]

Calculating the mass:

[tex]m = 145 g = 0.145 kg[/tex]

Calculating the force:

[tex]F=ma=0.145 \times 1104.5= 160.2 \ N[/tex]

 For point c:

0.195 times the pitcher's weight

[tex]m = 84 \ kg \\\\g = 9.8\ \frac{m}{s^2}\\\\[/tex]

Solving for W:

[tex]W=84 \times 9.8= 823.2 \ N[/tex]

Now the force of Part B could be defined as the fraction of the mass of the pitcher:  

[tex]\frac{F}{W}=\frac{160.2}{823.3}=0.195[/tex]

Answer:

The speed of the ball when it reaches equilibrium position is 3.31 m/s

Explanation:

Given;

mass of the object, m = 0.25 kg

initial displacement of the object, h₁ = 0.56 m

spring constant, k = 105 N/m

displacement at equilibrium position, h₂ = 0

initial velocity of the object, v₁ = 0

velocity of the object at equilibrium position = v₂

The change in gravitational potential energy at the equilibrium position is given as;

ΔP.E = mg(h₂ - h₁)

The change in kinetic energy of the object at the equilibrium position is given as;

ΔK.E = ¹/₂m(v₂² - v₁²)  

Apply the principle of conservation of mechanical energy;

ΔK.E  +  ΔP.E = 0

¹/₂m(v₂² - v₁²)  +  mg(h₂ - h₁) = 0

¹/₂m(v₂² - 0)  +  mg(0 - h₁) = 0

¹/₂mv₂²  -  mgh₁  =  0

¹/₂mv₂²  = mgh

¹/₂v₂² = gh

v₂² = 2gh

v₂ = √2gh

v₂ = √(2 x 9.8 x 0.56)

v₂ = 3.31 m/s

Therefore, the speed of the ball when it reaches equilibrium position is 3.31 m/s

Answer:

The Sum of mass and energy is always conserved in a nuclear reaction. Mass changes to energy, but the total amount of mass and energy combined remains the same

Explanation:

Every single radioactive decay, every single nuclear collision, every single nuclear reaction will conserve mass number and charge.

Answer:

[tex]\lambda=1.39\times 10^{-4}\ s^{-1}[/tex]

Explanation:

Given that,

The half-life of Barium-139 is [tex]4.96\times 10^3[/tex]

A sample contains [tex]3.21\times 10^{17}[/tex] nuclei.

We need to find the decay constant for this decay. The formula for half life is given by :

[tex]T_{1/2}=\dfrac{0.693}{\lambda}\\\\\lambda=\dfrac{0.693}{T_{1/2}}[/tex]

Put all the values,

[tex]\lambda=\dfrac{0.693}{4.96\times 10^3}\\\\=1.39\times 10^{-4}\ s^{-1}[/tex]

So, the decay constant is [tex]1.39\times 10^{-4}\ s^{-1}[/tex].

Answer:

The work done by the friction force is - 139927.5 J.

Explanation:

mass of diver, m = 45 kg

distance falls, h = 450 m

initial speed, u = 0 m/s

final speed = 51 m/s

According to the work energy theorem,

Work done by the gravity + work done by the friction force = change in kinetic energy

[tex]m g h + W' = 0.5 m ()v^2 - u^2)\\\\45\times 9.8\times 450 + W' = 0.5\times 45\times (51^2 - 0)\\\\198450 + W' = 58522.5\\\\W' = - 139927.5 J[/tex]

Answer:

option C is the correct one

Explanation:

I hope it helps u