Please help me I will give brainliest to the first correct answer

Answer:

A film badge

Explanation:

The film badge dosimeter or film badge is a personal dosimeter used for monitoring cumulative radiation dose due to ionizing radiation. It of a photographic film and a holder. This film badge is used to determine or measure and record the radiation exposure as a result of radiations, x-rays, gamma rays and also beta particles.

All users of medical x-ray equipment (C-arms, fluoro units, therapy units) must wear badges. Those using larger quantities of radioactive materials will also be provided badges. The correct option is A.

Ionising radiation exposure is measured using photographic film for personnel monitoring purposes. A filter that protects part of the film from particular types of radiation may also be present in the film badge, which may contain two or three films with varying sensitivity levels.

A particular kind of passive dosimeter is the film badge. It comprises of a photographic emulsion film in a light-tight wrapping (kept in a holder) that changes optical density in response to ionising radiation. The holder, which also includes several filters (for calculating tissue equivalent amounts), is typically worn on the body's trunk.

So film badge is the device used most commonly today for monitoring the radiation exposure of personnel.

Thus the correct option is A.

To know more about film badge, visit;

https://brainly.com/question/14019863

#SPJ7

Answer:

Molecules must collide with sufficient energy, known as the activation energy, so that chemical bonds can break. Molecules must collide with the proper orientation. A collision that meets these two criteria, and that results in a chemical reaction, is known as a successful collision or an effective collision.

Answer:

Option B clearly shows the Products of the reaction

Answer:

b)

Explanation:

[tex]pH = - log[H {}^{ + } ] \\ 2.36 = - log[H {}^{ + } ] \\ [H {}^{ + } ] = {10}^{ - 2.36} \\ [H {}^{ + } ] = 4.37 \times {10}^{ - 3} \: M[/tex]

Zinc sulfide (or zinc sulphide) is an inorganic compound with the chemical formula of ZnS. This is the main form of zinc found in nature, where it mainly occurs as the mineral sphalerite.

Answer:

V2~0.4839M

Explanation:

We're going to use Boyles law to answer the question.

Boyle's law:

P1V1=P2V2

P1=151mmHg

P2=166mmHg

V1=0.532L

V2=?

V2=(P1 x V1)/P2

V2=(151 x 0.532)/166

V2~0.4839M

Hope it helps:)

Answer: C. unknown

Explanation: got it right on acellus

Answer:

friend me on here and imma send you the link Explanation:

Answer:

[tex]2C _{6}H _{14} + 19O _{2}→12CO _{2} +14H _{2} O[/tex]

Answer:

Metal

Non-metal

Explanation:

Ionic compounds are said to be formed when metals donate electrons to non metals.

The metals become positively charged while the nonmetals become negatively charged.

CaF2 is composed of Ca^2+ and F^-. Calcium is a metal of group 2 in the periodic table while F is a nonmetal of group 17 in the periodic table.

Hence CaF2 is composed of a metal and a nonmetal.

Answer:

ZnSO4 + 2LiNO3 → Zn(NO3)2 + Li2SO4

Explanation:

There's many resources on web that can assist you with this concept:

https://en.intl.chemicalaid.com/tools/equationbalancer.php

https://www.webqc.org/balance.php

Answer:

The new pressure is equal to 1 atm.

Explanation:

Given that,

Initial pressure, P₁ = 3 atm

Initial volume, V₁ = 75cm³

Final volume, V₂ = 3V₁ = 225 cm³

We need to find the final pressure. The mathematical relation between P and V is :

[tex]P\propto \dfrac{1}{V}\\\\or\\\\\dfrac{P_1}{P_2}=\dfrac{V_2}{V_1}[/tex]

Where

V₂ is the new volume

So,

[tex]P_2=\dfrac{P_1V_1}{V_2}\\\\P_2=\dfrac{3\times 75}{225}\\\\P_2=1\ atm[/tex]

So, the new pressure is equal to 1 atm.

Answer: According to reaction below, when one mol of oxygen reacts with two mol of hydrogen, two mol of water is produced. Thus, when 2.5 mol of oxygen reacted with hydrogen, 2 * 2.5 mol = 5 mol of water is produced. The molar mass of water is 18 g/mol.

Explanation:

Not My WORK!  I got this info from another site.  BUT I HOPE IT HELPS :)

Answer:

ronger intermolecular forces will produce greater surface tension .

The intermolecular forces present in a sample of water are hydrogen bonds . The high surface tension of water allows a paper clip to "float" on the surface of the water. It's not actually floating, it's resting on top of the hydrogen bonds that exist between the water molecules at the surface. See the video below which shows a paper clip resting on the surface of water in a beaker.

If the hydrogen bonds are removed or disrupted, the surface tension will decrease. Watch what happens to the paper clip in the video when detergent (which will disrupt hydrogen bonds) is added to the beaker.

Here is video showing how a paperclip can "float" on water - it's actually being held up by the hydrogen bonds formed between water molecules which give water its surface tension.

pls mark me the brainliest

Answer:

71.92 kPa

Explanation:

Using the combined gas law equation;

P1V1/T1 = P2V2/T2

Where;

P1 = initial pressure (kPa)

P2 = final pressure (kPa)

V1 = initial volume (L)

V2 = final volume (L)

T1 = initial temperature (K)

T2 = final temperature (K)

According to the information provided in this question;

T1 = 50°C = 50 + 273 = 323K

V1 = 105L

T2 = -25°C = -25 + 273 = 248K

P2 = 105.4 kPa

P1 = ?

V2 = 55.0 L

Using P1V1/T1 = P2V2/T2

P1 × 105/323 = 105.4 × 55/248

105P1/323 = 5797/248

0.325P1 = 23.375

P1 = 23.375 ÷ 0.325

P1 = 71.92 kPa

sound energy is produced when particles vibrate. When an object vibrates, it causes movement in surrounding air molecules.

Answer:

The correct answer is - sudden static charge could damage sensitive medical equipment.

Explanation:

Staff members of a hospital or medical institution wear special shoes that are able to prevent static charge as they walk. These shoes help to prevent static charge as we know that the sudden transfer of a static charge to medical equipment may alter the reports or damage sensitive equipment. This type of static charge is negative or positive due to electronic devices touches the device leads to damage of electric devices.

Thus, the correct answer is - sudden static charge could damage sensitive medical equipment.

Answer: Number 3

Explanation: Electronegativity is a measure of how strongly atoms attract bonding electrons to themselves.

I think, I could be wrong though.

Answer:

1.2 mL

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated:

HCl + KOH —> KCl + H₂O

From the balanced equation,

Mole ratio of the acid, HCl (nₐ) = 1

Mole ratio of base, KOH (n₆) = 1

Finally, we shall determine the volume of the base, KOH needed to neutralize the acid, HCl as follow:

Molarity of base, KOH (M₆) = 0.997 M

Volume of acid, HCl (Vₐ) = 30 mL

Molarity of acid, HCl (Mₐ) = 0.0400 M

Volume of base, KOH (V₆) =?

MₐVₐ / M₆V₆ = nₐ/n₆

0.04 × 30 / 0.997 × V₆ = 1/1

1.2 / 0.997 × V₆ = 1

Cross multiply

0.997 × V₆ = 1.2

Divide both side by 0.997

V₆ = 1.2 / 0.997

V₆ = 1.2 mL

Thus, the volume of the base, KOH needed to neutralize the acid is 1.2 mL.

Explanation:Mg(s)+Zn(NO3)2(aq) → Mg(NO3)2(aq)+Zn(s)

Answer:

The required molar mass is 106.0 g/mol

Explanation:

We know,

Molar mass of Na = 23 g/mol

Molar mass of C= 12 g/mol

Molar mass of O= 16 g/mol

∴Molar mass of Na2CO3 = {(23 X 2) + 12+ (16 X 3)}  g/mol

                                          = (46 + 12 + 48) g/mol

                                          = 106   g/mol

So, the required molar mass is 106.0 g/mol

Answer:

If a one kilogram block of lead absorbs 2,000 J of energy then the temperature rise will be larger. If 1,000 J of heat is absorbed by a 2 kg block of lead then the temperature of the block doesn't rise as much since the energy is shared between more particles.

Explanation:

Answer:

2. much greater

The statement, that describes the energy released per mole of reactant during nuclear reactions is "much greater."

Nuclear reaction is a sort of reaction in which the structure of an atom's nucleus changes completely, frequently producing a different element while releasing energy.

The energy released by nuclei is far more dense (approximately a million times more dense) than the energy released by atom interactions (chemical reactions). This is what gives nuclear weapons their extraordinarily huge and destructive force when compared to conventional weapons. Nuclear reactions generate more energy than chemical reactions.

Hence the correct option is 2.

Learn more about nuclear reaction here

https://brainly.com/question/12786977

#SPJ2

Answer: The molarity of solution will be 0.049 M

Explanation:

Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L. The formula used to calculate molarity:

[tex]\text{Molarity of solution}=\frac{\text{Given mass of solute}}{\text{Molar mass of solute}\times \text{Volume of solution (L)}}[/tex]

We are given:

Given mass of sodium chloride = 10 g

Molar mass of sodium chloride = 58.44 g/mol

Volume of solution = 3.50 L

Putting values in above equation:

[tex]\text{Molarity of NaCl}=\frac{10 g}{58.44g/mol\times 3.50}\\\\\text{Molarity of NaCl}=0.049M[/tex]

Hence, the molarity of solution will be 0.049 M

Answer:

greenhouse effect is the same as global warming

Explanation:

they both mean warming of the earths surface

Answer: 300g

Explanation:

first we write the given values on top

224L. x

3 NO2 (g) + H2O (l) = 2HNO3 (l) + NO (g)

22.4L 30g

then we form a formula

224L/22.4L= x/30g

224*30/22.4

6720/22.4= 300g

Answer:

They live in the open snow

Explanation:

You will get iron sulfate and hydrogen sulfide gas (a.k.a. rotten egg gas).

FeS + H2SO4 = FeSO4 + H2S(g)

Change in Free Energy: ΔG(20C) = -66.6kJ (negative, so the reaction runs)

Change in Enthalpy: ΔH(20C) = -37.3kJ (negative, so the reaction is exothermic)

We'll begin by writing the balanced equation for the reaction between ferrous sulphide (FeS) and sulphuric acid (H₂SO₄). This is illustrated below:

FeS + H₂SO₄ —> H₂S + FeSO₄

Next, we shall determine the mass of FeS that reacted and the mass of H₂S produced from the balanced equation. This is illustrated below:

Molar mass of FeS = 56 + 32

= 88 g/mol

Mass of FeS from the balanced equation = 1 × 88 = 88g

Molar mass of H₂S = (2×1) + 32

= 2 + 32

= 34 g/mol

Mass of H₂S from the balanced equation = 1 × 34 = 34 g

From the balanced equation above,

88 g of FeS reacted to produce 34 g of H₂S.

Finally, we shall determine the mass of H₂S produced by the reaction of 4.4 g of FeS. This can be obtained as follow:

From the balanced equation above,

88 g of FeS reacted to produce 34 g of H₂S.

Therefore, 4.4 g of FeS will react to produce = (4.4 × 34)/88 = 1.7 g of H₂S.

Thus, 1.7 g of H₂S were obtained from the reaction.

Learn more: https://brainly.com/question/23115234