Paragraph 1:. How can droughts be triggered by: . • Human activities​

Answers

Answer 1

Answer:

Deforestation – plants and trees release water into the atmosphere, which creates clouds and then rain. Bad agricultural practices like intense farming not only contribute to deforestation in the first instance but also affect the absorbency of the soil, meaning it dries out much quicker.

Explanation:

Triggered by deforestation which is caused by humans


Related Questions

A very well-sorted sandstone with large-scale cross-bedding indicates the sand was likely Multiple Choice deposited by water in a meandering river system. O deposited by the wind in dunes. deposited by water in a braided river system. O O deposited by a turbidity current offshore.

Answers

The meandering nature of the river system in this case is suggested by the overall characteristics of the sandstone. Turbidity currents offshore can also deposit sediments, but they would not produce the cross-bedding patterns seen in this sandstone.

The presence of large-scale cross-bedding in a well-sorted sandstone is a good indication of the conditions under which the sand was deposited. In this case, the sandstone was likely deposited by water in a meandering river system. This is because meandering rivers often have currents that can sort sediments and create cross-bedding patterns. While wind can also create cross-bedding in sand, the well-sorted nature of the ]suggests that water was the more likely depositional agent. Other types of river systems, such as braided rivers, can also produce cross-bedded sandstones. However, the meandering nature of the river system in this case is suggested by the overall characteristics of the sandstone. Turbidity currents offshore can also deposit sediments, but they would not produce the cross-bedding patterns seen in this sandstone.

Learn more about meandering nature here

https://brainly.com/question/29412382

#SPJ11

what physical forces or conditions affect the dissolved oxygen content of water?

Answers

Several physical forces and conditions can affect the dissolved oxygen content of water, including:

Temperature: The solubility of oxygen in water decreases as temperature increases. Therefore, warm water can hold less dissolved oxygen than cold water.

Pressure: The solubility of oxygen in water increases with increasing pressure. Therefore, water at high pressure can hold more dissolved oxygen than water at low pressure.

Turbulence: The turbulence or agitation of water, such as in waterfalls or rapids, can increase the amount of dissolved oxygen in water by increasing the surface area of water exposed to air.

Depth: The dissolved oxygen content of water generally decreases with depth because photosynthesis by aquatic plants is limited by the amount of sunlight that can penetrate the water.

Salinity: The solubility of oxygen in water decreases as salinity increases. Therefore, saltwater can hold less dissolved oxygen than freshwater.

Biological activity: Biological activity, such as photosynthesis and respiration by aquatic plants and animals, can greatly affect the dissolved oxygen content of water. During photosynthesis, plants release oxygen into the water, while during respiration, both plants and animals consume oxygen from the water.

These physical forces and conditions can interact with each other to affect the dissolved oxygen content of water. For example, warm, stagnant, and shallow water with high salinity and low turbulence will generally have low dissolved oxygen levels, while cool, deep, and turbulent water with low salinity and high biological activity will generally have high dissolved oxygen levels.

Learn more about dissolved oxygen: https://brainly.com/question/26073928

Several physical forces and conditions can affect the dissolved oxygen content of water, including:

Temperature: The solubility of oxygen in water decreases as temperature increases. Therefore, warm water can hold less dissolved oxygen than cold water.

Pressure: The solubility of oxygen in water increases with increasing pressure. Therefore, water at high pressure can hold more dissolved oxygen than water at low pressure.

Turbulence: The turbulence or agitation of water, such as in waterfalls or rapids, can increase the amount of dissolved oxygen in water by increasing the surface area of water exposed to air.

Depth: The dissolved oxygen content of water generally decreases with depth because photosynthesis by aquatic plants is limited by the amount of sunlight that can penetrate the water.

Salinity: The solubility of oxygen in water decreases as salinity increases. Therefore, saltwater can hold less dissolved oxygen than freshwater.

Biological activity: Biological activity, such as photosynthesis and respiration by aquatic plants and animals, can greatly affect the dissolved oxygen content of water. During photosynthesis, plants release oxygen into the water, while during respiration, both plants and animals consume oxygen from the water.

These physical forces and conditions can interact with each other to affect the dissolved oxygen content of water. For example, warm, stagnant, and shallow water with high salinity and low turbulence will generally have low dissolved oxygen levels, while cool, deep, and turbulent water with low salinity and high biological activity will generally have high dissolved oxygen levels.

Learn more about dissolved oxygen: https://brainly.com/question/26073928

what is the worst possible location of an external surface flaw that could exist in the vessel (remember, neglect end effects)?

Answers

The worst possible location of an external surface flaw in a vessel would be at a highly stressed area, such as the mid-section or where the vessel experiences the maximum load.

The worst possible location of an external surface flaw in a vessel would be at a highly stressed area, such as the mid-section or where the vessel experiences the maximum load. In these areas, the presence of a surface flaw could potentially lead to a faster propagation of cracks and, ultimately, a failure of the vessel. Neglecting end effects, this mid-section would be the most critical area for an external surface flaw to occur.

Learn more about surface flaw here

https://brainly.com/question/15041657

#SPJ11

The worst possible location of an external surface flaw in a vessel would be at the point of maximum tensile stress, which typically occurs on the surface of the vessel perpendicular to the applied force or pressure.

In cylindrical vessels, this is typically at the mid-section of the vessel wall, where the stress is highest due to the bending caused by internal pressure. Therefore, if an external surface flaw were to occur at this point, it could potentially propagate and cause a catastrophic failure of the vessel.

It is important to note that other factors, such as the size, shape, and orientation of the flaw, as well as the material properties of the vessel, can also affect the likelihood and severity of failure.

To know more about Advection here

https://brainly.com/question/18803983

#SPJ4

Sort the following statements according to whether they describe a winter or summer beach profile. Items (6 items) (Drag and drop into the appropriate area below) The beach becomes narrower. The angle of beach is flatter. The beach builds out a little. Sand is deposited on the beach. The beach angle becomes steeper. Sand is eroded from the beach during frequent storms. Categories Winter Beach Profile Summer Beach Profile Drag and drop here Drag and drop here

Answers

During winter, the beach becomes narrower with a steeper angle due to erosion caused by storms, while during summer, the beach angle becomes flatter and builds out a little with sand deposits.


Here's the sorted list of statements according to whether they describe a winter or summer beach profile:

Winter Beach Profile:
1. The beach becomes narrower.
2. The beach angle becomes steeper.
3. Sand is eroded from the beach during frequent storms.

Summer Beach Profile:
1. The angle of the beach is flatter.
2. The beach builds out a little.
3. Sand is deposited on the beach.

Learn more about storms here: brainly.com/question/29808425

#SPJ11

Which of the following statements correctly explains why temperature increases with altitude in the stratosphere?
Choose one:
A) Ozone molecules in the ozone layer absorb ultraviolet radiation, causing them to vibrate faster.
B) The stratosphere is above the atmospheric layer in which weather occurs, so it receives more incoming solar radiation.
C) Atmospheric pressure in the stratosphere is lower than in the troposphere, which raises the temperature.
D) The stratosphere is closer to the Sun than the troposphere is, so it is heated more.

Answers

Option A) Ozone molecules in the ozone layer absorb ultraviolet radiation, causing them to vibrate faster. This absorption of radiation leads to an increase in temperature with altitude in the stratosphere.

Three oxygen atoms make up the chemical known as ozone or O3. Oxides of nitrogen (NOX) and volatile organic compounds (VOC), commonly referred to as hydrocarbons, undergo chemical interactions that result in ozone. Ozone is largely produced in the stratosphere by UV radiation. Atomic oxygen is created when conventional oxygen molecules (O2) are broken into two single oxygen atoms by high-energy UV photons. Ozone is created when an oxygen atom that has been released joins with another oxygen molecule.

Due of its ability to absorb a variety of UV light, ozone is incredibly valuable. Even low-energy UV radiation can cause an ozone molecule to split into a regular oxygen molecule and a free oxygen atom. This liberated oxygen atom typically rejoins an oxygen molecule to create another ozone molecule very soon.

To learn more about Ozone molecules, click here:

https://brainly.com/question/4819444

#SPJ11

what kinds of events makes relative dating difficult flipping
a)The layers could be flipped.
b)The layer can be folded
c)The layer can be tilted.
d)All of these are potential results of geological movements and can disrupt dating.

Answers

Relative dating relies on the assumption that rock layers are deposited in a horizontal position and that they are deposited in chronological order, with the oldest layers at the bottom and the youngest at the top.

The correct answer is d) All of these are potential results of geological movements and can disrupt dating.

However, geological events like folding, tilting, faulting, and erosion can cause the layers to be disrupted, making it difficult to establish the correct sequence of events. Flipping or overturning of layers, folding of rock layers, and tilting of layers can all make relative dating difficult or even impossible. These events can cause older layers to be placed above younger layers, making it difficult to establish the correct sequence of events.

Learn more about “ rock layers “ visit here;

https://brainly.com/question/31215118

#SPJ4

tsunami warnings on dec. 26, 2004 arrived too late to save coastal residents of thailand, india, and Sri Lanka because:
(a) no network of responsible officials to notify.
(b) It took seismologists too long to identify the earthquake as magnitude 9 or greater.
(c) It took seismologists too long to identify the earthquake as having tsunami-generating potential.
(d) all of the above.

Answers

On December 26, 2004, tsunami warnings arrived too late to save coastal residents of Thailand, India, and Sri Lanka because (d) all of the above.

This includes:
(a) There was no network of responsible officials to notify, which made communication difficult and delayed the warning dissemination process.
(b) It took seismologists too long to identify the earthquake as of magnitude 9 or greater, which impacted the speed of their response and recognition of the potential consequences.
(c) It took seismologists too long to identify the earthquake as having tsunami-generating potential, further delaying the possibility of issuing timely warnings.

On December 26, 2004, a massive earthquake of magnitude 9.1 struck off the west coast of Sumatra, Indonesia. The earthquake triggered a series of tsunamis that devastated coastal areas in many countries, including Thailand, India, and Sri Lanka. The tsunamis struck without warning, and many people had no time to evacuate, resulting in a high number of casualties.

Although tsunami warnings were issued in some countries, including Indonesia, they arrived too late to reach the coastal areas of Thailand, India, and Sri Lanka. In some cases, there were also communication breakdowns and inadequate infrastructure, which made it difficult to deliver timely warnings and evacuate people from affected areas. The disaster prompted efforts to improve tsunami warning systems and disaster preparedness in the affected countries and globally.

Therefore, option (d) is correct.

Learn more about seismologists:

https://brainly.com/question/29414461

#SPJ11

Explain why Nigeria moving its capital from legos to Abuja in 1991 is an example of a centripetal force for the country

Answers

Nigeria moving its capital from Legos to Abuja in 1991 is an example of a centripetal force for the country because the development is pushed towards the center of the country.

Centripetal force is the force that makes an object move in the direction of the center in a circular path. There will be some force pushing or pulling an object towards the center of the circle.

Nigeria is the richest African country and the capital city was moved to Abuja from Lagos in 1991. Abuja was located in the center of the country and the authorities decided to shift the capital to Abuja from Lagos to concentrate the development more towards the center of the country, which is an example of centripetal force.

Legos was not big enough to make more advancements and it was not structured well and it became very crowdy and dirty. So, they thought of making the development in all the sectors towards the center of the country. Finally, the capital was moved to Abuja in 1991, when Ibrahim Babangida was the head of the state.

To know more about Centripetal force, click on:https://brainly.com/question/14021112

encircle the Philippines on the map above​

Answers

Answer:

these are the philippines

Step 2: Background information about an area of study You must explain where in South Africa the study area is located. (This can be indicated on the map.) nition (degrees minutes and seconds) sit​

Answers

The education system in South Africa has a complex history shaped by social, political, and economic factors. It has gone through significant changes over the years, but still faces challenges such as inequality, resource disparities, and high dropout rates.

A research background information on South Africa education:

During the apartheid era, education was segregated along racial lines, with separate systems for white, black, colored, and Indian students. The education of black students was severely disadvantaged, with limited resources and poor infrastructure.

After the end of apartheid in 1994, efforts were made to address these inequalities and create a more inclusive and equitable education system. However, challenges persist, including disparities in resources and quality of education between different regions, high dropout rates, and a lack of access to quality education for many marginalized communities.

Additionally, the legacy of apartheid still impacts the education system, with issues such as language policies and curriculum transformation being debated. Despite these challenges, South Africa has made progress in increasing access to education and improving the quality of teaching and learning.

Read more about background information

brainly.com/question/24197526

#SPJ1

what 2 statements about political maps are accurate?

Answers

Answer:

Explanation:

1. Political maps depict the boundaries and territories of countries, states or other administrative regions.

2. Political maps typically show the locations of major cities, capital cities, and other important places such as airports, ports, and military bases.

Global demand for oil increases by about ____ per year.
a. 2 percent
b. 0.5 percent
c. 25 percent
d. 10 percent

Answers

Global demand for oil increases by about A. 2 % per year.

How does oil demand change ?

Oil is a key and omnipresent energy source that is critical worldwide. Its widespread use has contributed to an incremental surge in demand over several decades.

Numerous reports confirm that the international desire for oil persists and moves ahead, increasing at roughly 1-2% each year. The principal reason behind this upsurge can be attributed to the rising global population coupled with industrialization and urbanization happening on many fronts across the globe.

Find out more on oil demand at https://brainly.com/question/22411514

#SPJ1

Hi can someone help me with these two discussion post.

Answers

Streams that have achieved a graded state can be disrupted through the instigation of abrupt changes in their flow, temperature, or chemical composition.

What is the consequence of this?

The catastrophic breach of a dam, for instance, could provene to constitute a radical rise in water and sediment within a particular river, leading to both flooding and erosion farther along its course.

Alternatively, contributing pollutants and wastewater may greatly differ the water chemistry and compromise aquatic life within it. Moreover, shifting climates may perturb stream habitats by morphing their temperatures and water circulation patterns, which consequently alter the species quantity and distribution present.

Read more about chemical compositions here:

https://brainly.com/question/29108029
#SPJ1

9. While drilling, the mud is being circulated at 5 bbls/minute. The surface pressure seen at the pumps is 3,500 psi.(2 pts) Assuming the well is 7,375 ft deep, estimate is the bottomhole pressure (at 7,375 ft) under these conditions, assuming the mud weight is 11 ppg? (the bottomhole pressure is the sum of a) the surface pressure and b) the pressure caused by the column of mud in the wellbore)

Answers

Estimated bottomhole pressure at a depth of 7,375 ft under the given conditions is 7,545 psi.

To estimate the bottomhole pressure (BHP) at a depth of 7,375 ft, we need to consider the surface pressure and the pressure caused by the column of mud in the wellbore. The pressure caused by the column of mud in the wellbore can be calculated using the formula:Pressure = Mud weight x Depth x 0.052


Where: Mud weight = 11 ppg ,Depth = 7,375 ft ,0.052 = a conversion factor


So, Pressure caused by mud column = 11 x 7,375 x 0.052 = 4,045 psi .To estimate the BHP, we need to add the surface pressure and the pressure caused by the mud column. BHP = Surface pressure + Pressure caused by mud column= 3,500 psi + 4,045 psi = 7,545 psi


Therefore, the estimated bottomhole pressure at a depth of 7,375 ft under the given conditions is 7,545 psi.

To know more about pressure,refer the link:

https://brainly.com/question/29341536#

#SPJ11

In an ancient Indian story, two river gods raced down the side of what snow-covered mountain range?

Answers

Answer:

The Himalayas

Explanation:

Pls give me brainliest i beg u i will follow u aswell

Using the drop-down menus, sort the stars by apparent brightness as seen from Earth. Brightest to Dimmest

Answers

Depending on how close a star is to Earth, it may appear brilliant even when it isn't particularly bright. The brightest stars are Sirius, Vega, Polaris, Proxima, Centauri, and Barnard's Star.

What are the stars by apparent brightness?

Perceived brightness is distinct from actual brightness, which is governed by a star's luminosity, or the amount of energy it generates per unit time.

A star may appear brilliant even when it isn't very bright due to its proximity to Earth. A star that is close to Earth, however, could appear brighter than a star that is far away.

Therefore, depending on how close a star is to Earth, it may appear brilliant even when it isn't particularly bright. However, a star that is nearby Earth could be perceived as being brighter than a star that is far away.

Brightest to Dimmest:

Sirius A

Vega

Polaris

Proxima Centauri

Barnard's Star

Learn more about stars here:

brainly.com/question/31258649

#SPJ1

The given question is incomplete. the complete question is given below.

(a) Rank the following stars from the above H-R diagram in order of brightness from dimmest to brightest: Barnard's Star, Canopus, Rigel A, Sirius B, Sun.

(b) Rank the following stars from the above H-R diagram in order of brightness from brightest to dimmest: Aldebaran A, Altair, Antares, Polaris, Procyon B.

(c) Rank the following stars from the above H-R diagram in order of temperature from hottest to coolest: Aldebaran A, Altair, Antares, Mira, Rigel A.

The planet Bellerophon, discovered using the radial velocity method, orbits a Sun-like star every 4 days. Bellerophon is about the size of Saturn and orbits its star nearly edge-on from our perspective here on Earth.
Part 1 (4pts): Describe a likely formation and evolution scenario for Bellerophon starting from its origin in the nebular disk of its proto-star, to where we discovered it today.
Part 2 (2pts): Given your description of the above scenario, how likely is it that we will find a terrestrial-sized planet (like Earth or Mars) in this same system? Explain your reasoning.

Answers

Part 1: Bellerophon likely formed from the gas and dust in the protoplanetary disk that surrounded its Sun-like star. As the disk cooled, solid particles began to form and grow into larger objects through accretion.

As Bellerophon formed, it likely experienced interactions with other planetary bodies in the system, including gravitational interactions and collisions. These interactions could have influenced Bellerophon's orbital properties and caused it to migrate inward to its current close orbit around the star.

Part 2: Given the close proximity of Bellerophon to its star, it is less likely that we will find a terrestrial-sized planet in the same system. Terrestrial planets like Earth and Mars require solid, rocky material to form and are typically found in the inner regions of a star's habitable zone, where temperatures are not too hot or too cold for liquid water to exist.

Learn more about “  planet Bellerophon, “ visit here;

https://brainly.com/question/31474375

#SPJ4

Which of the relative age dating principle was employed to determine the oldest feature? A. Superposition B. Cross-cutting C. Original horizontality D. A & B only E. All of the above

Answers

The relative age dating principle employed to determine the oldest feature is the Principle of Superposition. The correct option is A

Superposition is the idea that in a sequence of undisturbed sedimentary rocks, the oldest rocks are at the bottom, and the younger rocks are on top. This principle helps geologists and scientists to establish the chronological order of rock layers and their corresponding ages.

Cross-cutting and Original Horizontality are also important relative age dating principles, but they serve different purposes. The Principle of Cross-cutting states that a feature cutting across another, such as a fault or an intrusion, is younger than the feature it cuts.

The Principle of Original Horizontality suggests that layers of sediment are initially deposited horizontally under the influence of gravity, and any tilting or folding is a result of later events.

In summary, to determine the oldest feature, the Principle of Superposition (option A) is the most relevant principle. However, it's important to note that all of these principles (Superposition, Cross-cutting, and Original Horizontality) work together to help geologists understand the history and formation of rock layers.

To know more about Superposition, refer here:

https://brainly.com/question/2069576#

#SPJ11

Complete question:

Which of the relative age dating principle was employed to determine the oldest feature?

A. Superposition

B. Cross-cutting

C. Original horizontality

D. A & B only

E. All of the above

T/F Natural mineralization produced ammonia contributes significantly to ammonia volatilization.

Answers

The given statement " Natural mineralization produced ammonia contributes significantly to ammonia volatilization." is true becasue natural mineralization produced ammonia can contribute significantly to ammonia volatilization.

Mineralization is the process by which organic nitrogen compounds in the soil are converted to inorganic forms, such as ammonium (NH4+). Ammonia (NH3) is then produced from ammonium as a result of various processes, including nitrification and volatilization. Volatilization is the process by which ammonia is converted into a gas and released into the atmosphere.

Natural mineralization of organic matter in the soil can be a significant source of ammonia volatilization, particularly in agricultural systems where nitrogen inputs are high.

You can learn more about mineralization at

https://brainly.com/question/13649652

#SPJ11

Explain the processes that cause the shape of a beach to have a distinct seasonal cycle.

Answers

Answer:

Explanation:

The energy levels of the waves and currents are different in the winter vs. the summer. This affects the beach shape and the amount of sand on the beach. Stronger winter currents leave coarser materials in the winter such as gravel and cobbles.

Where do valleys tend to form in a landscape?
A)Valleys form where rock layers are resistant to erosion.
B)Valleys form where rock layers are easily erodible (soft).
C)Valleys tend to form where rocks are horizontal.
D)Valleys form where rocks are tilted.

Answers

B)Valleys tend to form where rock layers are easily erodible (soft). do valleys tend to form in a landscape

The formation of valleys in a landscape is largely determined by the geology of the area. Valleys form when water or ice erodes the landscape over a long period of time, typically following the path of least resistance. This erosion is most effective where the underlying rock layers are soft or easily erodible, allowing the water or ice to cut through the landscape and form a channel.

Rock layers that are resistant to erosion, such as hard sandstone or granite, are more likely to form ridges or plateaus than valleys. However, valleys can still form in areas where there are differences in the resistance of the rock layers, such as where a soft layer overlies a hard layer.

The orientation of the rock layers, whether they are horizontal or tilted, can also play a role in the formation of valleys. However, this is not a universal rule, and valleys can form in both horizontal and tilted rock layers depending on the specific conditions of the area.

Learn more about Valleys here

https://brainly.com/question/27916620

#SPJ11

Give three precautions to be taken when citing a weather station ​

Answers

Answer:

1). The area should be away from buildings, trees, and tall objects.

2).  The ground should be free from flooding.

3).  The area should have a wide open space.

Explanation:

Proper location is essential if the weather station is to provide the data necessary to estimate ET in a consistent and reliable manner.

You have a special candle that makes a Ruby look black. What would this special candle have more of as compared to a normal candle?A. Blue light wavelengths and few red wavelengthsB. NothingC. Red light wavelengths and few black wavelengthsD. Iron and TitaniumE. Chromium

Answers

The special candle that makes a Ruby look black would have more of: Blue light wavelengths and few red wavelength as compared to a normal candle. The correct option is A.

To explain this phenomenon, we need to understand that the color of a gemstone, such as a Ruby, is due to the selective absorption and transmission of specific light wavelengths. Rubies appear red because they absorb blue and green light wavelengths while allowing red light wavelengths to pass through.

In this case, the special candle emits more blue light wavelengths and fewer red wavelengths than a normal candle. As a result, the Ruby appears black because it absorbs most of the blue light from the candle, and there is not enough red light available to be transmitted through the gemstone.

This creates the perception of a black color, as the Ruby is not reflecting any significant amount of light in the visible spectrum back to our eyes.

In summary, the special candle has more blue light wavelengths and few red wavelengths, which leads to the Ruby appearing black due to the absorption of the available light and the lack of red light transmission.

To know more about wavelength, refer here:

https://brainly.com/question/12377285#

#SPJ11

Complete question:

You have a special candle that makes a Ruby look black. What would this special candle have more of as compared to a normal candle?

A. Blue light wavelengths and few red wavelengths

B. Nothing

C. Red light wavelengths and few black wavelengths

D. Iron and Titanium

E. Chromium

what are the human and natural causes of hurricane maria?

Answers

The occurrence of Hurricane Maria in September 2017, which brought devastation and turmoil to the Caribbean and southeastern portions of America, can be attributed largely to both human and natural elements.

The human and natural causes of hurricane maria

Natural Causes:

Meteorological conditions: Hurricanes take shape over warm waters when an abundance of moisture and heat exists within the atmosphere.

Environmental factors: The nature and environmental disposition prevalent in the affected region have a significant impact on how violent or mild a hurricane may become.

Human Causes:

Climate change: Although climate change cannot singly result in the formulation of storms like Hurricane Maria, anthropogenic global warming can affect the frequency and potency of future hurricanes.      

Deforestation and land use changes: Cutting trees for lumber, altering landscapes to suit our needs, and dismantling coastal habitats disrupts ecological balance and reduces coastal ecosystems' ability to mitigate hurricane effects.

Learn more about hurricane Maria at

https://brainly.com/question/12619551

#SPJ1

the correct sequence of layers of the atmosphere from nearest the earth’s surface upward is:

Answers

Answer:

Explanation:From lowest to highest, the major layers are the troposphere, stratosphere, mesosphere, thermosphere and exosphere.

Tsunami models help scientists forecast which of the following? Choose all that apply. O Arrival times O Wave height O Earthquake O magnitudes Fatalities

Answers


These models do not directly forecast fatalities, as that depends on various factors like population density and infrastructure. However, the information provided by the models can be used to estimate potential impacts and casualties.

Tsunami models help scientists forecast the arrival times and wave height of tsunamis. They do not directly predict earthquake magnitudes or fatalities, but this information can be used in conjunction with other data to estimate potential impacts.
Tsunami models help scientists forecast:
- Arrival times
- Wave height
- Magnitudes

Learn more about earthquake magnitudes here:

https://brainly.com/question/15378928

#SPJ11

Historically, powerful countries have continued to _________ and _________ weaker nations.

Answers

Historically, powerful countries have continued to dominate and exploit weaker nations. This has often taken the form of colonization.

Where stronger countries establish control over weaker territories for their resources, labor, or strategic advantage. This process has resulted in the displacement and suffering of indigenous populations, as well as the extraction of wealth from colonized territories. In more recent times, powerful countries have used economic and political leverage to exert control over weaker nations, often leading to economic dependence and limited sovereignty. This pattern of domination has contributed to global inequality and political instability, and has been a subject of ongoing debate and critique.

Learn more about dominate here:

https://brainly.com/question/14053639

#SPJ11

Solution, abrasion, and hydraulic action are factors involved in:
a. wave deposition.
b. moving longshore currents.
c. causing wave refraction.
d. wave erosion.

Answers

Answer:

Explanation:Ocean waves are a source of energy. In 1–2 sentences, make and justify a claim about whether ocean waves are a renewable or nonrenewable resource.(2 points)

formulate your own hypothesis based on drought

Answers

Hypothesis: Prolonged droughts lead to an increase in wildfires and soil erosion, resulting in long-term environmental damage and economic losses.

Explanation: Droughts, which are prolonged periods of below-average rainfall, can have severe impacts on the environment and the economy. When droughts occur, vegetation becomes dry and susceptible to ignition, leading to an increase in the frequency and intensity of wildfires. Additionally, the lack of moisture in the soil can cause erosion, which can result in the loss of valuable topsoil and damage to infrastructure such as roads and buildings.

Furthermore, droughts can have long-term effects on the environment, such as changes in the composition of plant and animal communities, and can cause water scarcity, which can lead to conflicts over water resources. Economic losses can also occur due to crop failures, reduced livestock productivity, and increased costs associated with water management.

Therefore, I hypothesize that prolonged droughts lead to an increase in wildfires and soil erosion, resulting in long-term environmental damage and economic losses.

many historic floods are associated with the large precipitation that accompanies a(n) ; a good example is the storm named mitch in 1998 that brought 78 inches of rain in some places in a few days.

Answers

The historic floods are often associated with heavy precipitation, such as the example you gave of Hurricane Mitch in 1998.

When there is a significant amount of rainfall in a short period of time, the ground becomes saturated and is unable to absorb any more water, causing rivers and other bodies of water to overflow their banks. This can lead to severe flooding and widespread damage. In the case of Hurricane Mitch, the amount of rain that fell in some areas was unprecedented and resulted in catastrophic flooding and landslides.

A notable illustration is the storm Mitch in 1998, which dropped 78 inches of rain in some locations in a few of days.

Tropical cyclones are powerful, rotating storm systems that form over warm ocean waters. They can bring torrential rains, strong winds, and storm surges, which can lead to severe flooding. In the case of Hurricane Mitch in 1998, the immense rainfall caused extensive damage and loss of life in Central America, making it one of the deadliest and most destructive hurricanes in history.

To Know more about precipitation,

https://brainly.com/question/18109776

#SPJ11

Other Questions
Write your answer to each part clearly. Support your answers with relevant information and examples. Where calculations are required, show your work. The total amount of municipal solid waste (MSW) generated in the United States increased from 80 million metric tons (88 million U.S. tons) in 1960 to 232 million metric tons (255 million U.S. tons) in 2007. (a) Describe reasons for this increase and explain how the United States became the leader of the "throw-away society." (b) Explain why reducing is more favorable than reusing, which in turn is more favorable than recycling. (c) Describe the process of composting and compare a home composting system with that of a large-scale municipal facility. a) Indicate whether F2CCF2 is linear, planar, or neither.b) Indicate which orbitals overlap to form the bond between the carbon atoms in H2CCH2a. between an unhybridized p orbital on C and an unhybridized p orbital on the other Cb. between an unhybridized s orbital on C and an unhybridized s orbital on the other Cc. between a hybrid sp2 orbital on C and a hybrid sp2 orbital on the other Cd. between a hybrid sp orbital on C and a hybrid sp orbital on the other C How would the percent yield of the reaction be affected (higher, lower or no change) if some sodium bicarbonate is left unreacted? Explain. Exercise 4. Some diamonds appear yellow because they contain nitrogenous compounds that absorb purple light of frequency 7.231014 s1. Calculate the wavelength (in nm) of the absorbed light. 2. The FM station broadcasts traditional music at 102 MHz on your radio. Units for FM frequencies are given in megahertz (MHz). Find the wavelength of these radio waves in meters (m), nanometers (nm), and angstrom (). how much energy (in electron volts) does it take to ionize an electron from the ground level? (dna structure/function) what is responsible for regulating which genes or subsets of genes are transcribed in a particular cell type? resistances of 2.1 , 4.9 , and 6 and a 26.4 v battery are all in series. find the potential difference across the first (2.1 ) resistor. answer in units of v. 1) If sec ( ) = 17/ 8, 0 90, then:sin = __________?cos =__________?tan = __________?2) Determine the value of sin ^2 x+cos ^2 x for x = 30 degrees. To identify the best of mutually exclusive alternatives by the B/C ratio method, an incremental analysis is necessary.Question 1 options:TrueFalse if an electron's position can be measured to an accuracy of how accurately can its velocity be known Which of the following is a NOT a difference between social facilitation and social learning? O a. Involves multiple members of a social group b. Does not require the participants to learn something new O c. Does not require that the behavior continue in the future Od. All of the above are differences between social facilitation and social learning n May, Rebeccas daughter, Isabella, sustained a serious injury that made it impossible for her to continue living alone. Isabella, who is a novelist, moved back into Rebeccas home after the accident. Isabella has begun writing a novel based on her recent experiences. To accommodate Isabella, Rebecca incurred significant remodeling expenses (widening hallways, building a separate bedroom and bathroom, and making kitchen appliances accessible to Isabella). In addition, Rebecca had an indoor swimming pool constructed so that Isabella could do rehabilitation exercises prescribed by her physician.In September, Isabella underwent major reconstructive surgery in Denver. The surgery was performed by Dr. Rama Patel, who specializes in treating injuries of the type sustained by Isabella. Rebecca drove Isabella from Champaign, Illinois, to Denver, a total of 1,100 miles, in Isabellas specially equipped van. They left Champaign on Tuesday morning and arrived in Denver on Thursday afternoon. Rebecca incurred expenses for gasoline, highway tolls, meals, and lodging while traveling to Denver. Rebecca stayed in a motel near the clinic for eight days while Isabella was hospitalized. Identify the relevant tax issues based on this information, and prepare a list of questions you would need to ask Rebecca and Isabella to advise them as to the resolution of any issues you have identified. X_new=pd.DataFrame (data_test.iloc[:,:-1]) prediction = clf.predict(X_new) C:\Users\18765\AppData\Local\Programs\Python\Python38\lib\site-packages\sklearn\base.py:488: FutureWarning: The feature name s should match those that were passed during fit. Starting version 1.2, an error will be raised. Feature names seen at fit time, yet now missing: ST_Slope warnings.warn(message, FutureWarning) An art studio offers beginner workshops to local students. The studio originally hosted ten workshops each month with an average of eight attendees at each. Due to a rise in popularity, the studio begins adding one workshop each month, and the average number of attendees at each session increases by two. Write an equation that can be used to find the number of months, x, after which there will be an average of 320 total attendees each month, and determine if seven months is a reasonable number of months for this situation In comparing Bundle A to Bundle B, Mike :a. prefers Bundle A to Bundle B b. prefers Bundle B to Bundle A c. is indifferent between Bundle A and Bundle B there are n people seated at a round table. Mara wants a job that will provide workers compensation insurance benefits in case she is injured while at work. Which types of companies provide this benefit? A. all companiesworkers compensation is a government benefit B. most companies that have 500 or more employees C. most companies in the technical and scientific fields D. any company that has more than 25 employees [Based on Ryden exercise 6.6] You observe a quasar at redshift z = 5 and determine that its observed flux varies on a timescale of tobs = 3 days. What is the correspond- ing timescale for this variation at the time the light was emitted, temit? Assuming that this variation originates from some physical phenomenon at the quasar (rather than the propagation of its light towards us), it must originate from a region of proper (physcical) size (temit) ctemit since any larger region contains points that are no longer causally connected. What is this maximum proper size in astronomical units (AU)? Estimate the corresponding observed angular size in arcseconds (60 x 60 arcseconds = 1) for this region in the benchmark model. Write the balanced molecular chemical equation for the reaction in aqueous solution for sodium hydroxide and tin (IV) acetate. If no reaction occurs, simply write only NR.Be sure to include the proper phases for all species within the reaction. was the allied dual-thrust strategy the best one to use in the pacific war? why or why not?