Answer: b. A construction worker carries a heavy beam while walking at constant speed along a flat surface.
Explanation:
Answer:
A construction worker carries a heavy beam while walking at constant speed along a flat surface.
hope it is helpful to you
Two students go to play basketball. They notice the ball is flat (it won't bounce). They decide to pump it up with air. After it is pumped with air, will the ball have more, less, or the same amount of mass as before air was added?
A. The ball has less mass after being pumped with air.
B.Cannot determine unless we measure the mass.
C.The ball has more mass after being pumped with air.
D. The ball has the same amount of mass after being pumped with air.
Justify your answer
The ball has more mass being pumped with air. So, option (C) is correct answer.
What is mass?In physics, mass is a quantitative measurement of inertia, a basic characteristic of all matter. It essentially refers to a body of matter's resistance to changing its speed or location in response to the application of a force. The change caused by an applied force is smaller the more mass a body has. The kilogram serves as the unit of mass in the International System of Units (SI).
As the amount of air is added to the basketball by pumping it up with air, the mass of air is also added with the basketball. Hence, the ball has more mass now.
Learn more about mass here:
https://brainly.com/question/19694949
#SPJ2
Below is a single strand of DNA, what is the complementary base pair for the strand?
AAG, GCA, TCA, GAT
what is kinetic energy, in your own words but be more detailed about what you say.
Kinetic energy is the energy when a object is in motion. ... energy gets transferred to the object, The energy transferred is kinetic energy, and it depends on the mass and speed.
Explanation:
Samples of different materials, A and B, have the same mass, but the sample
of A is higher in density. Which statement could explain why this is so?
A. The sample of material A has greater volume than the sample of
material B.
B. The particles that make up material B have more mass than the
particles that make up material A.
C. The particles that make up material B are more closely packed
together than the particles that make up material A.
D. The particles that make up material A have more mass than the
particles that make up material B.
Answer:
B. The particles that make up material B have more mass than the
particles that make up material A.
Explanation:
Which of these terms means an object's resistance to changing its motion?
Question 1 options:
inertia
velocity
newton
power
Question 2 (1 point)
Which of these equations is a representation of the 2nd Law of Motion?
Question 2 options:
v=d/t
W=Fd
F=ma
a=v/t
Question 3 (1 point)
Which words correctly complete the 3rd Law of Motion?
For every ___________ there is an equal and opposite ___________.
Question 3 options:
cause, effect
action, reaction
distance, velocity
cost, benefit
Question 4 (1 point)
Which of these could be a force that changes the motion of an object?
Question 4 options:
friction
a push or pull
air resistance
all of the above
Question 5 (1 point)
According to the second law of motion, which statement is TRUE?
Question 5 options:
every action has a reaction
a heavy object requires more force to push than a lighter object
an object at rest, stays at rest
heavy objects accelerate faster than lighter elements with the same force
Answer:
Inertia
F=ma
Action, reaction
All of the above
A heavy object requires more force to push than a lighter object.
Which type of uninterruptible power supply uses AC power to continuously charge its battery, while also providing power to devices through the battery?
Answer:
An online UPS.
Explanation:
An online UPS is a type of uninterruptible power supply uses AC power to continuously charge its battery, while also providing power to devices through the battery. It combines the inverter and rectifier to provide power to the alternating current (AC) load while supplying alternating current (AC) power during an outage to the load through the inverter.
Basically, an uninterruptible power supply unit is used to provide constant power supply to an electrical device, especially during a power outage.
what factors could enhance memory and kept constant? and why
To help make sure information goes from short-term memory to long-term memory, you can use memory-enhancing strategies. One strategy is rehearsal, or the conscious repetition of information to be remembered. Think about how you learned your multiplication tables as a child.
Proven ways to protect memory include following a healthy diet, exercising regularly, not smoking, and keeping blood pressure, cholesterol, and blood sugar in check. Living a mentally active life is important, too. Just as muscles grow stronger with use, mental exercise helps keep mental skills and memory in tone.
According to one study, mental stimulation like reading can help protect memory and thinking skills, especially as you age. The authors even suggest that reading every day can slow down the late-life cognitive decline. ... The act of reading helps to heighten overall brain function and increase memory.
Let's take a deeper dive into evidence-based exercises that offer the best brain-boosting benefits.
Have fun with a jigsaw puzzle. ...
Try your hand at cards. ...
Build your vocabulary. ...
Dance your heart out. ...
Use all your senses. ...
Learn a new skill. ...
Teach a new skill to someone else. ...
Listen to or play music.
Which answer is consistent with a replacement of light bulb that will increase
the intensity (brightness) of the light in a room
Answer:
What increases the brightness of a light bulb?
Increasing the voltage increases the brightness of the bulb. When a bulb in a series circuit is unscrewed all bulbs in the circuit go out. Increasing the number of bulbs in a series circuit decreases the brightness of the bulbs. ... Bulbs in parallel are brighter than bulbs in series.
No matter how well we get along with our parents as adolescents, there comes a time when we need to break away and assert our own independence. There are several ways in which we do this, some of them deliberate and intentional and some of them not so intentional. Describe several ways you use or have used to break away from your parents. Briefly describe your parents' reactions.
Answer: I never said anything to them but if i did it would be "I need a break from you, i love you but sometimes I have to find the path on my own." i would say this if i wasn't scared to hurt them.
Explanation:
can someone help me pls
Answer: food, female water
Explanation:
Can I have brainliest
Answer : dog horse cat lion deer moose tiger cheetah hippopotamus zebra rabbit penguin dolphin shark fish
Explanation:
define gravitational field intensity?
Explanation:
The strength of the gravitational field is known as gravitational field intensity. It is the gravitational force acting on a unit test mass.
What is the wavelength of sound wave in air that has a temperature of 24.6°C that has a frequency of 440.8 Hz?
A. 465.40 m
B. 0.78 m
C. 17.92 m
D. 0.75 m
A student is holding a marble in his hand. What are the equal and opposite forces that are acting on it?
Answer:
Gravity and his hand
Explanation:
if the voltage across a 12 ohm resistor is 4.0 volts. the current through the resistor is?
Answer:
Current = 0.33 Amperes
Explanation:
Given the following data:
Resistance = 12 ohm
Voltage = 4 v
To find the current;
Ohm's law states that at constant temperature, the current flowing in an electrical circuit is directly proportional to the voltage applied across the two points and inversely proportional to the resistance in the electrical circuit.
Mathematically, Ohm's law is given by the formula;
Voltage = current * resistance
Substituting into the formula, we have;
4 = current * 12
Current = 4/12
Current = 0.33 Amperes
What causes mechanical wave motion
Answer:
A disturbance or vibration in matter
Explanation:
Answer:
A mechanical wave is a distance in matter that transfer energy through the matter. A mechanical wave starts when matter is disturbed. A source of energy is needed to disturb matter and start a mechanical wave.
What is the electric field strenght in units of N/C if the flux through a 2.0m by 1.0m rectangular surface is 396Nm2/C, if the electric field is uniform, and if the plane of the surface is at an angle of π/3 radians with respect to the direction of the field ?
Answer:
The appropriate answer is "396 N/C".
Explanation:
The give values are:
Rectangular surface,
[tex]\Phi_e=396 \ N.m^2/C[/tex]
[tex]a = 2 \ m[/tex]
[tex]b = 1 \ m[/tex]
Angle,
[tex]\theta =\frac{\pi}{3} \ radian[/tex]
Now,
The area of rectangle (A) will be:
= [tex]a\times b[/tex]
= [tex]2\times 1[/tex]
= [tex]2 \ m^2[/tex]
hence,
The electric field strength will be:
⇒ [tex]\Phi_e=E.A Cos \theta[/tex]
or,
⇒ [tex]E=\frac{\Phi_e}{ACos \theta}[/tex]
On putting the given values, we get
⇒ [tex]=\frac{396}{2\times Cos(\frac{\pi}{3} )}[/tex]
⇒ [tex]=\frac{396}{2\times 0.5}[/tex]
⇒ [tex]=\frac{396}{1}[/tex]
⇒ [tex]=396 \ N/C[/tex]
Elena puts her eggs in a cage made out of wood. The wood breaks during
the landing, but the eggs survive. Which would be the best reason to
explain why this prevented her eggs from breaking?"
O Directs the energy of the impact towards the egg
O Decreases the velocity of the egg before it starts slowing down
O Increases the time that the egg slows down
O Decreases the time that the egg slows down.
O Directs the energy of the impact away from the egg
O Increases the velocity of the egg before it starts slowing down
Answer:
I think the answer is Decreases the time that the egg slows down.
Explanation:
If not try it starts slowing down
O Increases the time that the egg slows down.
Two bears sit on a see-saw. The see-saw is 3.5 m in total
length with the fulcrum at the center. A 40 kg baby bear sits at the very end of one side. Where should the 120 kg father bear sit relative to the center to keep the see-saw balanced?
Answer:
Explanation:
For the see-saw to be balanced, take moment at the fulcrum:
40g * 3.5/2 = 120g * distance
distance = 1.167m from the center
Which of the following BEST describes what occurs in a fusion reaction?
A.
Two low mass nuclei are joined to form one nucleus.
B.
A single nucleus divides into two or more nuclei and gives off energy.
C.
Electrons are shared between the nuclei.
D.
A chemical reaction occurs between the nuclei.
Answer:
Two mass nuclei are joined to form one nucleus
Explanation:
As the name implies "fusion", it is the joining of lighter nucleus to form a heavier nucleus to produce energy
explain why does the bowling ball decelerate as it travels along the lane
The main cause of this is Friction. The more oil that is laid down, the less friction there is between the ball and the lane surface. The less friction, the harder it is for the bowler to send the ball in a curved path imparted by the spin that the bowler puts on the ball at the instant of release.
True or False: A higher vapor pressure (evaporates easily) corresponds to strong intermolecular forces. (dont answer)
anyways free p o i n ts...
Answer:
truuuuuuuuuuuuuuuuuuuuuuuuujuuuuuuuur
Answer:
true
Explanation:
I took a test this year and I know the answer
A satellite is acted upon by a 10n force upwards and 20n force downwards. What is the net force acting on the satellite and what direction will it move in
Answer:
Net force = 10 N in downward direction
Explanation:
Given that,
Upward force = 10 N
Downward force = 20 N
Let downward is negative and upward is positive.
Net force = 10+(-20)
= -10 N
So, the net force is 20 N and it is acting in downward direction.
A wave is moving at the rate of 40 cm/s. Its wavelength is 5 cm. What is the frequency of the wave? INCLUDE THE CORRECT UNIT!
Answer:
Solution given:
velocity=40cm/s
wave length=5cm
we have
frequency =velocity/wavelength=40/5=8hertz.
the frequency of the wave is 8 hertz.
A device used to measure small currents is a(n)
a.
electric motor.
b.
commutator.
c.
armature.
d.
galvanometer.
Answer:
d.
galvanometer.
Explanation:
Galvanometer is the device which is used for measuring small currents due to changing magnetic field.
A body is thrown up with with velocity u.it reaches maximum height h. If velocity of projection is doubled the maximum height is..
Answer: 4h
Explanation:
Given
The body is thrown vertically upward with velocity u and reaches a height of h
The relation between u and h is given by
[tex]\Rightarrow v^2-u^2=2as\\[/tex]
Put [tex]v=0,a=-g[/tex] in above equation
[tex]\Rightarrow 0-u^2=2(-g)h\\\\\Rightarrow h=\dfrac{u^2}{2g}[/tex]
If the velocity of projection is doubled i.e. 2u
[tex]\Rightarrow h'=\dfrac{(2u)^2}{2g}\\\Rightarrow h'=4\times \dfrac{u^2}{2g}\\\\\Rightarrow h'=4h[/tex]
The maximum height becomes 4h
Below is a single of DNA, What is the complementary base pair for RNA?
AGC, CGT, ATA, GAT
Which would not be a reason for using wind power?
O Wind power has been created in areas where the wind is fast and consistent to provide consistent power.
O Wind power produces no pollution whatsoever.
O Wind power requires much less capital than other forms of alternative energy.
O Wind cannot be transported or used directly.
What type of lens is used in the viewfinder of a simple camera and why? (Concave or convex)
Answer:
convex
sorry if this is wrong
What is an important difference between nanotechnology and microtechnology?
Nanotechnology shows results of quantum mechanics, but microtechnology does not.
Microtechnology shows results of quantum mechanics, but nanotechnology does not.
Microtechnology is used to make products, but nanotechnology is not.
Nanotechnology is used to make products, but microtechnology is not.
Answer:
A) Nanotechnology shows results of quantum mechanics, but microtechnology does not.
Explanation:
Edge 21 test
The difference between nanotechnology and micro technology is nanotechnology shows results of quantum mechanics, but micro technology does not.
What are the differences between micro-technology and nanotechnology?Micro technology:
The technology that can be featured completely in a microscopic scale is known to be micro - technology. This technology that contribute to design, use components, devices that involves in small size. These were done significantly in smaller features.
Nanotechnology:
Nanotechnology is the field of applied science and technology that can be measured through nanoscale. Nanotechnology is helping to considerably improve, industry sectors - information technology, homeland security, medicine, transportation, energy, food safety, and environmental science, among many others.
Thus, Nanotechnology shows results of quantum mechanics but micro-technology does not. Option A is the correct answer.
Learn more about micro and nano technology,
https://brainly.com/question/24723558
#SPJ5
PLS HELP
Light of wavelength A and frequency fpasses through a single slit of width a. A diffraction pattern is observed on a screen at a distance x from the slit. Which change will decrease the width of the central maximum?
A. Decrease the frequency of the light
B. Decrease the wavelength of the light.
C. Decrease the width of the slit.