The three evolutionary steps of Egyptian burial structures are: mastabas, step pyramids, and true pyramids. These structures represent the development of burial practices in Egypt.
The three evolutionary steps of Egyptian burial structures are mastabas, pyramids, and rock-cut tombs. Mastabas were flat, rectangular structures made of mud bricks that were used during the Early Dynastic Period. Pyramids were built during the Old and Middle Kingdoms and were more elaborate than mastabas, featuring sloping walls and a pointed top. Rock-cut tombs were used during the New Kingdom and were carved into the sides of cliffs or hills. They were often decorated with intricate carvings and paintings.
Learn more about pyramids here https://brainly.com/question/13057463
#SPJ11
Deserts in coastal regions are most likely to be found where the currents are ______. A. warm. B. cold. C. headed toward the east. D. headed toward the west.
D
Explanation:
D. headed toward the west.
Which of the relative age dating principle was employed to determine the oldest feature? A. Superposition B. Cross-cutting C. Original horizontality D. A & B only E. All of the above
The relative age dating principle employed to determine the oldest feature is the Principle of Superposition. The correct option is A
Superposition is the idea that in a sequence of undisturbed sedimentary rocks, the oldest rocks are at the bottom, and the younger rocks are on top. This principle helps geologists and scientists to establish the chronological order of rock layers and their corresponding ages.
Cross-cutting and Original Horizontality are also important relative age dating principles, but they serve different purposes. The Principle of Cross-cutting states that a feature cutting across another, such as a fault or an intrusion, is younger than the feature it cuts.
The Principle of Original Horizontality suggests that layers of sediment are initially deposited horizontally under the influence of gravity, and any tilting or folding is a result of later events.
In summary, to determine the oldest feature, the Principle of Superposition (option A) is the most relevant principle. However, it's important to note that all of these principles (Superposition, Cross-cutting, and Original Horizontality) work together to help geologists understand the history and formation of rock layers.
To know more about Superposition, refer here:
https://brainly.com/question/2069576#
#SPJ11
Complete question:
Which of the relative age dating principle was employed to determine the oldest feature?
A. Superposition
B. Cross-cutting
C. Original horizontality
D. A & B only
E. All of the above
T/F Natural mineralization produced ammonia contributes significantly to ammonia volatilization.
The given statement " Natural mineralization produced ammonia contributes significantly to ammonia volatilization." is true becasue natural mineralization produced ammonia can contribute significantly to ammonia volatilization.
Mineralization is the process by which organic nitrogen compounds in the soil are converted to inorganic forms, such as ammonium (NH4+). Ammonia (NH3) is then produced from ammonium as a result of various processes, including nitrification and volatilization. Volatilization is the process by which ammonia is converted into a gas and released into the atmosphere.
Natural mineralization of organic matter in the soil can be a significant source of ammonia volatilization, particularly in agricultural systems where nitrogen inputs are high.
You can learn more about mineralization at
https://brainly.com/question/13649652
#SPJ11
what physical forces or conditions affect the dissolved oxygen content of water?
Several physical forces and conditions can affect the dissolved oxygen content of water, including:
Temperature: The solubility of oxygen in water decreases as temperature increases. Therefore, warm water can hold less dissolved oxygen than cold water.Pressure: The solubility of oxygen in water increases with increasing pressure. Therefore, water at high pressure can hold more dissolved oxygen than water at low pressure.Turbulence: The turbulence or agitation of water, such as in waterfalls or rapids, can increase the amount of dissolved oxygen in water by increasing the surface area of water exposed to air.Depth: The dissolved oxygen content of water generally decreases with depth because photosynthesis by aquatic plants is limited by the amount of sunlight that can penetrate the water.Salinity: The solubility of oxygen in water decreases as salinity increases. Therefore, saltwater can hold less dissolved oxygen than freshwater.Biological activity: Biological activity, such as photosynthesis and respiration by aquatic plants and animals, can greatly affect the dissolved oxygen content of water. During photosynthesis, plants release oxygen into the water, while during respiration, both plants and animals consume oxygen from the water.These physical forces and conditions can interact with each other to affect the dissolved oxygen content of water. For example, warm, stagnant, and shallow water with high salinity and low turbulence will generally have low dissolved oxygen levels, while cool, deep, and turbulent water with low salinity and high biological activity will generally have high dissolved oxygen levels.
Learn more about dissolved oxygen: https://brainly.com/question/26073928
Several physical forces and conditions can affect the dissolved oxygen content of water, including:
Temperature: The solubility of oxygen in water decreases as temperature increases. Therefore, warm water can hold less dissolved oxygen than cold water.Pressure: The solubility of oxygen in water increases with increasing pressure. Therefore, water at high pressure can hold more dissolved oxygen than water at low pressure.Turbulence: The turbulence or agitation of water, such as in waterfalls or rapids, can increase the amount of dissolved oxygen in water by increasing the surface area of water exposed to air.Depth: The dissolved oxygen content of water generally decreases with depth because photosynthesis by aquatic plants is limited by the amount of sunlight that can penetrate the water.Salinity: The solubility of oxygen in water decreases as salinity increases. Therefore, saltwater can hold less dissolved oxygen than freshwater.Biological activity: Biological activity, such as photosynthesis and respiration by aquatic plants and animals, can greatly affect the dissolved oxygen content of water. During photosynthesis, plants release oxygen into the water, while during respiration, both plants and animals consume oxygen from the water.These physical forces and conditions can interact with each other to affect the dissolved oxygen content of water. For example, warm, stagnant, and shallow water with high salinity and low turbulence will generally have low dissolved oxygen levels, while cool, deep, and turbulent water with low salinity and high biological activity will generally have high dissolved oxygen levels.
Learn more about dissolved oxygen: https://brainly.com/question/26073928
Tsunami models help scientists forecast which of the following? Choose all that apply. O Arrival times O Wave height O Earthquake O magnitudes Fatalities
These models do not directly forecast fatalities, as that depends on various factors like population density and infrastructure. However, the information provided by the models can be used to estimate potential impacts and casualties.
Tsunami models help scientists forecast the arrival times and wave height of tsunamis. They do not directly predict earthquake magnitudes or fatalities, but this information can be used in conjunction with other data to estimate potential impacts.
Tsunami models help scientists forecast:
- Arrival times
- Wave height
- Magnitudes
Learn more about earthquake magnitudes here:
https://brainly.com/question/15378928
#SPJ11
18. Hurricanes, tropical cyclones and typhoons all refer to the same weather system. True or False
Answer: True
Explanation: True
Give three precautions to be taken when citing a weather station
Answer:
1). The area should be away from buildings, trees, and tall objects.
2). The ground should be free from flooding.
3). The area should have a wide open space.
Explanation:
Proper location is essential if the weather station is to provide the data necessary to estimate ET in a consistent and reliable manner.
what are the human and natural causes of hurricane maria?
The occurrence of Hurricane Maria in September 2017, which brought devastation and turmoil to the Caribbean and southeastern portions of America, can be attributed largely to both human and natural elements.
The human and natural causes of hurricane mariaNatural Causes:
Meteorological conditions: Hurricanes take shape over warm waters when an abundance of moisture and heat exists within the atmosphere.
Environmental factors: The nature and environmental disposition prevalent in the affected region have a significant impact on how violent or mild a hurricane may become.
Human Causes:
Climate change: Although climate change cannot singly result in the formulation of storms like Hurricane Maria, anthropogenic global warming can affect the frequency and potency of future hurricanes.
Deforestation and land use changes: Cutting trees for lumber, altering landscapes to suit our needs, and dismantling coastal habitats disrupts ecological balance and reduces coastal ecosystems' ability to mitigate hurricane effects.
Learn more about hurricane Maria at
https://brainly.com/question/12619551
#SPJ1
The fastest growing alternative energy source is:
a. nuclear power.
b. coal energy.
c. wind power.
d. oil energy.
many historic floods are associated with the large precipitation that accompanies a(n) ; a good example is the storm named mitch in 1998 that brought 78 inches of rain in some places in a few days.
The historic floods are often associated with heavy precipitation, such as the example you gave of Hurricane Mitch in 1998.
When there is a significant amount of rainfall in a short period of time, the ground becomes saturated and is unable to absorb any more water, causing rivers and other bodies of water to overflow their banks. This can lead to severe flooding and widespread damage. In the case of Hurricane Mitch, the amount of rain that fell in some areas was unprecedented and resulted in catastrophic flooding and landslides.
A notable illustration is the storm Mitch in 1998, which dropped 78 inches of rain in some locations in a few of days.
Tropical cyclones are powerful, rotating storm systems that form over warm ocean waters. They can bring torrential rains, strong winds, and storm surges, which can lead to severe flooding. In the case of Hurricane Mitch in 1998, the immense rainfall caused extensive damage and loss of life in Central America, making it one of the deadliest and most destructive hurricanes in history.
To Know more about precipitation,
https://brainly.com/question/18109776
#SPJ11
Which urban city model would best describe Dublin, Ireland?
in addition to reduced levels of insolation, what processes lead to the formation of cold water at the poles? multiple select question. upwelling of cold deep water occurs. atmospheric instability leads to rapid overturing of air. sea ice increases the average surface albedo, reducing the amount of energy absorbed from the sun. lack of clouds allows for more outgoing longwave radiation. cold, dry air descends.
In addition to reduced levels of insolation, multiple processes lead to the formation of cold water at the poles.
Upwelling of cold deep water occurs, which brings cold water up from the deep ocean to the surface. Atmospheric instability leads to rapid overturing of air, which mixes cold air with warmer air and creates cooler temperatures. Sea ice increases the average surface albedo, reducing the amount of energy absorbed from the sun and contributing to cooler temperatures. Lack of clouds allows for more outgoing longwave radiation, which cools the surrounding air and water. Additionally, cold, dry air descends, which further contributes to the cold temperatures at the poles.
To know more about Energy visit :
https://brainly.com/question/1932868
#SPJ11
how can droughts be triggered by human activities
Answer:
Explanation:Human activities can trigger droughts in several ways, including:
1. Deforestation: Trees play a critical role in the water cycle by absorbing and releasing water into the atmosphere through transpiration. Deforestation reduces the number of trees, which can lead to reduced rainfall and the occurrence of droughts.
2. Land-use changes: Changes in land use, such as urbanization, agriculture, and mining, can alter the hydrological cycle and lead to reduced water availability. For example, urbanization can lead to increased runoff and reduced infiltration, which can result in reduced groundwater recharge and decreased soil moisture, leading to droughts.
3. Overuse of water resources: Overuse of groundwater and surface water resources for agricultural and industrial purposes can lead to reduced water availability, especially during dry seasons, leading to droughts.
4. Climate change: Human-induced climate change is causing changes in global climate patterns, including increased temperatures, changes in precipitation patterns, and more frequent and severe extreme weather events, which can lead to droughts in some regions.
Overall, human activities can disrupt the natural water cycle, leading to water scarcity and droughts. It is important to manage water resources sustainably and reduce greenhouse gas emissions to mitigate the impacts of human-induced climate change on the occurrence of droughts.
Explain why Nigeria moving its capital from legos to Abuja in 1991 is an example of a centripetal force for the country
Nigeria moving its capital from Legos to Abuja in 1991 is an example of a centripetal force for the country because the development is pushed towards the center of the country.
Centripetal force is the force that makes an object move in the direction of the center in a circular path. There will be some force pushing or pulling an object towards the center of the circle.
Nigeria is the richest African country and the capital city was moved to Abuja from Lagos in 1991. Abuja was located in the center of the country and the authorities decided to shift the capital to Abuja from Lagos to concentrate the development more towards the center of the country, which is an example of centripetal force.
Legos was not big enough to make more advancements and it was not structured well and it became very crowdy and dirty. So, they thought of making the development in all the sectors towards the center of the country. Finally, the capital was moved to Abuja in 1991, when Ibrahim Babangida was the head of the state.
To know more about Centripetal force, click on:https://brainly.com/question/14021112
A very well-sorted sandstone with large-scale cross-bedding indicates the sand was likely Multiple Choice deposited by water in a meandering river system. O deposited by the wind in dunes. deposited by water in a braided river system. O O deposited by a turbidity current offshore.
The meandering nature of the river system in this case is suggested by the overall characteristics of the sandstone. Turbidity currents offshore can also deposit sediments, but they would not produce the cross-bedding patterns seen in this sandstone.
The presence of large-scale cross-bedding in a well-sorted sandstone is a good indication of the conditions under which the sand was deposited. In this case, the sandstone was likely deposited by water in a meandering river system. This is because meandering rivers often have currents that can sort sediments and create cross-bedding patterns. While wind can also create cross-bedding in sand, the well-sorted nature of the ]suggests that water was the more likely depositional agent. Other types of river systems, such as braided rivers, can also produce cross-bedded sandstones. However, the meandering nature of the river system in this case is suggested by the overall characteristics of the sandstone. Turbidity currents offshore can also deposit sediments, but they would not produce the cross-bedding patterns seen in this sandstone.
Learn more about meandering nature here
https://brainly.com/question/29412382
#SPJ11
three causes how heavy rainfall happens
Answer:
Evaporation, condensation, precipitation
Explanation:
The presence of fossils suggests that a rock is MOST LIKELY
A metamorphic
B sedimentary
C igneous
D concrete
Answer:
B sedimentary.
Fossils are typically found in sedimentary rocks, which are formed from layers of sediment (such as sand, silt, and clay) that accumulate over time and then harden into rock. The remains of plants and animals that are preserved in these layers of sediment eventually become fossils. Metamorphic rocks are formed when existing rocks are subjected to intense heat and pressure, which can change their composition and texture. Igneous rocks are formed from the solidification of molten magma or lava. Concrete is a human-made material composed of cement, water, and aggregates such as sand and gravel.
what would happen to the relative humidity value If the temperature increased from 25°C? A. It would increase. B. It would decrease. C. It would remain the same. D. It depends on the dew point temperature.
If the temperature increased from 25°C, the relative humidity value would decrease. This is because warm air can hold more water vapor than cool air, so as the temperature rises, the air can hold more moisture without becoming saturated.
Therefore, the same amount of water vapor in the air would represent a smaller percentage of the maximum amount the air can hold, resulting in a lower relative humidity value. Assuming that the amount of water vapor in the air remains constant, if the temperature increases from 25°C, the relative humidity would decrease. This is because warmer air can hold more moisture than cooler air, so as the temperature increases, the same amount of water vapor becomes a smaller percentage of the maximum amount the air can hold.
Conversely, if the temperature decreases, the relative humidity would increase, as the colder air can hold less moisture and the same amount of water vapor becomes a larger percentage of the maximum amount the air can hold.
It's worth noting that if the amount of water vapor in the air changes due to other factors such as evaporation or precipitation, the relative humidity value would be affected accordingly. Additionally, the dew point temperature, which is the temperature at which the air becomes saturated with water vapor and condensation begins to form, can also impact the relative humidity value.
Read more about relative humidity here:https://brainly.com/question/30765788
#SPJ11
Using the drop-down menus, sort the stars by apparent brightness as seen from Earth. Brightest to Dimmest
Depending on how close a star is to Earth, it may appear brilliant even when it isn't particularly bright. The brightest stars are Sirius, Vega, Polaris, Proxima, Centauri, and Barnard's Star.
What are the stars by apparent brightness?Perceived brightness is distinct from actual brightness, which is governed by a star's luminosity, or the amount of energy it generates per unit time.
A star may appear brilliant even when it isn't very bright due to its proximity to Earth. A star that is close to Earth, however, could appear brighter than a star that is far away.
Therefore, depending on how close a star is to Earth, it may appear brilliant even when it isn't particularly bright. However, a star that is nearby Earth could be perceived as being brighter than a star that is far away.
Brightest to Dimmest:
Sirius A
Vega
Polaris
Proxima Centauri
Barnard's Star
Learn more about stars here:
brainly.com/question/31258649
#SPJ1
The given question is incomplete. the complete question is given below.
(a) Rank the following stars from the above H-R diagram in order of brightness from dimmest to brightest: Barnard's Star, Canopus, Rigel A, Sirius B, Sun.
(b) Rank the following stars from the above H-R diagram in order of brightness from brightest to dimmest: Aldebaran A, Altair, Antares, Polaris, Procyon B.
(c) Rank the following stars from the above H-R diagram in order of temperature from hottest to coolest: Aldebaran A, Altair, Antares, Mira, Rigel A.
tsunami warnings on dec. 26, 2004 arrived too late to save coastal residents of thailand, india, and Sri Lanka because:
(a) no network of responsible officials to notify.
(b) It took seismologists too long to identify the earthquake as magnitude 9 or greater.
(c) It took seismologists too long to identify the earthquake as having tsunami-generating potential.
(d) all of the above.
On December 26, 2004, tsunami warnings arrived too late to save coastal residents of Thailand, India, and Sri Lanka because (d) all of the above.
This includes:
(a) There was no network of responsible officials to notify, which made communication difficult and delayed the warning dissemination process.
(b) It took seismologists too long to identify the earthquake as of magnitude 9 or greater, which impacted the speed of their response and recognition of the potential consequences.
(c) It took seismologists too long to identify the earthquake as having tsunami-generating potential, further delaying the possibility of issuing timely warnings.
On December 26, 2004, a massive earthquake of magnitude 9.1 struck off the west coast of Sumatra, Indonesia. The earthquake triggered a series of tsunamis that devastated coastal areas in many countries, including Thailand, India, and Sri Lanka. The tsunamis struck without warning, and many people had no time to evacuate, resulting in a high number of casualties.
Although tsunami warnings were issued in some countries, including Indonesia, they arrived too late to reach the coastal areas of Thailand, India, and Sri Lanka. In some cases, there were also communication breakdowns and inadequate infrastructure, which made it difficult to deliver timely warnings and evacuate people from affected areas. The disaster prompted efforts to improve tsunami warning systems and disaster preparedness in the affected countries and globally.
Therefore, option (d) is correct.
Learn more about seismologists:
https://brainly.com/question/29414461
#SPJ11
what was the impact of industrialization on food production, population growth, urbanization, and class structure
Answer:
The impact of industrialization on food production, population growth, urbanization, and class structure was significant.
First, industrialization revolutionized food production by increasing the efficiency and quantity of food production through new technologies and farming methods. This allowed for a more abundant food supply and helped to support population growth.
Second, the increase in food production helped to fuel population growth as people were able to access more food and live longer, healthier lives.
Third, industrialization led to urbanization as people moved from rural areas to cities in search of work in the new factories and industries. This led to the growth of cities and the development of urban infrastructure to support the growing population.
Finally, industrialization also had a significant impact on class structure as it led to the emergence of a new middle class, while also perpetuating existing class divisions. The new industries and technologies created jobs and opportunities for some, while also leading to exploitation and poor working conditions for others.
Overall, industrialization had a profound impact on food production, population growth, urbanization, and class structure, shaping the modern world as we know it.
Solution, abrasion, and hydraulic action are factors involved in:
a. wave deposition.
b. moving longshore currents.
c. causing wave refraction.
d. wave erosion.
Answer:
Explanation:Ocean waves are a source of energy. In 1–2 sentences, make and justify a claim about whether ocean waves are a renewable or nonrenewable resource.(2 points)
did mt kilimanjaro from due to decompression melting
Answer:
Explanation:Mount Kilimanjaro formed as a result of the active continental rifting and is comprised of three volcanic cones. Volcanic activity is thought to have commenced around 1 million years ago when molten lava began to burst through fractures created by the progressively thinning lithosphere.
As we explore and observe the features here in blacktail canyon, we need to identify the various rock types for each of the rock units.
as we explore and observe the features here in blacktail canyon, we need to identify the various rock types for each of the rock units.
Upper rock type ____
a. Ignecus
b. Metamorphic
c. Sedimentary
As you explore and observe the features in Blacktail Canyon you will encounter various rock types that make up the landscape. In this environment, the upper rock type found in the Canyon is predominantly sedimentary. Therefore: The correct option is C.
These rock units have been shaped by past geological processes such as weathering, water, and wind, resulting in the formation of soil and the unique landforms present in this area. The sedimentary rocks also contribute to the canyon's distinct red color.
To identify the various rock types in Blacktail Canyon, we need to consider the geology and geography of the land and environment. Blacktail Canyon is located in the United States and is carved out by the Colorado River.
Over time, wind and water have contributed to the weathering and erosion of the landscape, exposing various rock types in the canyon walls.
Learn more about other canyon: https://brainly.com/question/30333294
#SPJ11
formulate your own hypothesis based on drought
TROPICAL velop. ginated on the world stage. Indicate the tropical cyclone eloise. tropical cyclones? How did the tropical cyclone impact the fol Environment • • Economy • People/Communities Paragraph 3: What precautions can be implemented/ tropical cyclone. Refer to: • The local government/Governmer The local residents • Paragraph 4: Evaluate the impact of Global Warming Conclusion/Summary: Describe/Discuss your own views/exper
Historically, powerful countries have continued to _________ and _________ weaker nations.
Historically, powerful countries have continued to dominate and exploit weaker nations. This has often taken the form of colonization.
Where stronger countries establish control over weaker territories for their resources, labor, or strategic advantage. This process has resulted in the displacement and suffering of indigenous populations, as well as the extraction of wealth from colonized territories. In more recent times, powerful countries have used economic and political leverage to exert control over weaker nations, often leading to economic dependence and limited sovereignty. This pattern of domination has contributed to global inequality and political instability, and has been a subject of ongoing debate and critique.
Learn more about dominate here:
https://brainly.com/question/14053639
#SPJ11
The planet Bellerophon, discovered using the radial velocity method, orbits a Sun-like star every 4 days. Bellerophon is about the size of Saturn and orbits its star nearly edge-on from our perspective here on Earth.
Part 1 (4pts): Describe a likely formation and evolution scenario for Bellerophon starting from its origin in the nebular disk of its proto-star, to where we discovered it today.
Part 2 (2pts): Given your description of the above scenario, how likely is it that we will find a terrestrial-sized planet (like Earth or Mars) in this same system? Explain your reasoning.
Part 1: Bellerophon likely formed from the gas and dust in the protoplanetary disk that surrounded its Sun-like star. As the disk cooled, solid particles began to form and grow into larger objects through accretion.
As Bellerophon formed, it likely experienced interactions with other planetary bodies in the system, including gravitational interactions and collisions. These interactions could have influenced Bellerophon's orbital properties and caused it to migrate inward to its current close orbit around the star.
Part 2: Given the close proximity of Bellerophon to its star, it is less likely that we will find a terrestrial-sized planet in the same system. Terrestrial planets like Earth and Mars require solid, rocky material to form and are typically found in the inner regions of a star's habitable zone, where temperatures are not too hot or too cold for liquid water to exist.
Learn more about “ planet Bellerophon, “ visit here;
https://brainly.com/question/31474375
#SPJ4
Rocks of Glacier NP exhibit sedimentary features like mudcracks, ripplemarks and stromatolites. All of these indicate that the depositional environment in northern Montana at the time was:a) a warm, shallow tropical sea near a coastlineb) a deep ocean basin adjacent to a continent ---maybec) a fast-flowing river and adjacent broad floodplaind) a deep lake basin surrounded by mountains <---this one ??
d) a deep lake basin surrounded by mountains is the most likely depositional environment indicated by the sedimentary features found in the rocks of Glacier NP in northern Montana.
d) a deep lake basin surrounded by mountains is the most likely depositional environment indicated by the sedimentary features found in the rocks of Glacier NP in northern Montana. Mudcracks and ripple marks suggest that the sediment was deposited in shallow water and exposed to air, while stromatolites indicate a quiet, shallow, and nutrient-rich environment such as a lake. The presence of mountains surrounding the basin would also provide a source of sediment and nutrients for the lake ecosystem.
Learn more about depositional environment here
https://brainly.com/question/29038474
#SPJ1
Which of the following statements correctly explains why temperature increases with altitude in the stratosphere?
Choose one:
A) Ozone molecules in the ozone layer absorb ultraviolet radiation, causing them to vibrate faster.
B) The stratosphere is above the atmospheric layer in which weather occurs, so it receives more incoming solar radiation.
C) Atmospheric pressure in the stratosphere is lower than in the troposphere, which raises the temperature.
D) The stratosphere is closer to the Sun than the troposphere is, so it is heated more.
Option A) Ozone molecules in the ozone layer absorb ultraviolet radiation, causing them to vibrate faster. This absorption of radiation leads to an increase in temperature with altitude in the stratosphere.
Three oxygen atoms make up the chemical known as ozone or O3. Oxides of nitrogen (NOX) and volatile organic compounds (VOC), commonly referred to as hydrocarbons, undergo chemical interactions that result in ozone. Ozone is largely produced in the stratosphere by UV radiation. Atomic oxygen is created when conventional oxygen molecules (O2) are broken into two single oxygen atoms by high-energy UV photons. Ozone is created when an oxygen atom that has been released joins with another oxygen molecule.
Due of its ability to absorb a variety of UV light, ozone is incredibly valuable. Even low-energy UV radiation can cause an ozone molecule to split into a regular oxygen molecule and a free oxygen atom. This liberated oxygen atom typically rejoins an oxygen molecule to create another ozone molecule very soon.
To learn more about Ozone molecules, click here:
https://brainly.com/question/4819444
#SPJ11