Answer:
Solids - vibrational (and rotational); moving very slowly.
Liquids - vibrational, rotational, and translational; moving quickly.
Gases - vibrational, rotational, and translational; moving very quickly.
Explanation:
Particles are always moving. No matter what. There is a certain point where they move so slowly it is considered minuscule, but they are in fact moving.
Thus, in solids, liquids, and gases, you can expect particles to move in a certain trend. That trend is average kinetic energy of the particles and the forces holding them together (attraction).
is orange juice a element or a mixture
Orange juice is mixture.
Answer:
[tex]\boxed {\boxed {\sf Mixture}}[/tex]
Explanation:
An element is pure and all the atoms have the same atomic number. An element has a symbol and can be found on Periodic Table of Elements.
A mixture is created when two or more substances are combined physically.
Orange juice can't be found on the Periodic Table of Elements. Orange juice is made up of many different substances/ingredients, like water, sugar, and juice from the orange.
Therefore, orange juice is considered to be a mixture. More specifically, a homogenous mixture because it is uniform. (*applies to pulp-free orange juice). If it has pulp, it would be a heterogenous mixture.
A 7.0 liter balloon at room temperature contains helium gas. if the temperature is halved, what happen to the volume?
The volume = 6.71 L
Further explanationCharles's Law
When the gas pressure is kept constant, the gas volume is proportional to the temperature
[tex]\tt \dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}[/tex]
V₁=7 L
T₁=25 °C(room temperature) + 273 = 298 K
T₂=12.5(halved) + 273 = 285.5 K
[tex]\tt \dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}\\\\\dfrac{7}{298}=\dfrac{V_2}{285.5}\\\\V_2=6.71~L[/tex]
1 point
What would 140000000.0 be in scientific notation?
a. 1.4 x10-8
b. 1.4 x108
c. 14 x10-7
d. 14 x107
Answer:
B
Explanation:
you're moving the decimal 8 spots to the left so it can only be B
whats the balanced chemical equation for the standard formation reaction of solid glucose, where everything can only have 1 mole with physical states.
Answer:
6C(s) + 6H2(g) + 3O2(g) --------------------> C6H12O6(s).
Explanation:
One of the examples under the type of sugar; monosaccharide(simple sugar) is the glucose. Glucose(with IUPAC name as D-glucose) as a monosaccharide (simple sugar) has the molar mass of 180.156 g/mol and a Melting point of 146 °C.
Thus, the unbalanced chemical reaction for the formation of glucose is given below;
C(s) + H2(g) + O2(g) --------------------------> C6H12O6(s) ΔH°f = -1273.1KJ/mol.
The balanced chemical reaction for the formation of one mole of glucose is given as;
6C(s) + 6H2(g) + 3O2(g) --------------------> C6H12O6(s).
The balanced chemical equation for the standard formation reaction of solid glucose is: [tex]\mathbf{6C_{(s)} + 6H_{2(g)} +3O_2_{(g)} \to C_6H_{12}O_{6} _{(s)} \ \ \ }[/tex]
Glucose is a simple sugar of a class of carbohydrates known as monosaccharides. It is the principal metabolite for energy production in the human body.
The formation of solid glucose [tex]\mathbf{C_6 H_{12} O_6_{(s)}}[/tex] occurs by the reaction of carbon, hydrogen, and oxygen.
The reaction formation of the solid glucose is:
[tex]\mathbf{C_{(s)} + H_{2(g)} +O_2_{(g)} \to C_6H_{12}O_{6} _{(s)} \ \ \ \Delta H_f^0= -1273.1 \ kJ/mol}[/tex]
Now, the balanced chemical equation can be expressed as follows;
[tex]\mathbf{6C_{(s)} + 6H_{2(g)} +3O_2_{(g)} \to C_6H_{12}O_{6} _{(s)} \ \ \ }[/tex]
Learn more about glucose here:
https://brainly.com/question/8394646?referrer=searchResults
What is the acceleration of a 200 gram ice cube if the
net force on the ice cube is 2 N?
Answer:
First answer is correct, please let me know if you need any help though!
Heyy, I am a 14 year old girl
what is the chem formula for chromium (V) chloride?
I will give brailiest to whoever needs it!
Answer:
pls pls pls pls pls give me brainliest i just need one more plssssssss
Explanation:
Which of the following correctly shows the flow of energy in a food chain
The direction of energy flow in simple food chain is always sun=> plants( producers)=> primary consumers=> secondary consumers=> tertiary consumers, than finally after death of an organism, to decomposers
The direction of energy flow in simple food chain is always sun=> plants( producers)=> primary consumers=> secondary consumers=> tertiary consumers.
What is food chain?The sequence of events within an ecosystem known as a "food chain" occurs when one live organism eats a different organism, which is then eaten by a larger organism. A food chain is created by the transfer of energy as well as nutrients from one creature to another at various trophic levels. A food web is comprised of numerous linked food chains.
The feeding habits or connections between living things are also explained by the food chain. Trophic level is the term used to describe the orderly phases in a food chain, from producers from the bottom through primary, secondary, and tertiary consumers. A trophic level is any position along a food chain. A food web and a food chain are similar, but a food web seems far bigger. The direction of energy flow in simple food chain is always sun=> plants( producers)=> primary consumers=> secondary consumers=> tertiary consumers.
Therefore, the direction of energy flow in simple food chain is always sun=> plants( producers)=> primary consumers=> secondary consumers=> tertiary consumers.
To know more about food chain, here:
https://brainly.com/question/17172730
#SPJ3
Match each form of energy with its correct description.
mechanical
involving the motion of atoms
chemical
involving electrical charges
thermal
involving the position and motion of
an object
electrical
involving energy stored in chemical
bonds
Answer
involving electrical charges: electrical
involving energy stored in chemical
bonds: thermal
involving the position and motion of
an object: mechanical
involving the motion of atoms: chemical
Explanation:
almost 100 this is right, sorry if this is wrong :)
Select the correct answer. Which substance is made of polymers? A. marble B. protein C. salt D. steel
Answer:
the answer is B proteins
Explanation:
brainliest pls
Answer:
B. protein
Explanation:
A polymer is defined as a molecule which has 'n' number of monomer units.
Similarly proteins are also polymers as they are made up of amino acids and contain a number of repeated units just like polymers.
The chemical equation shows only the reactants and one product. How many H atoms must be present in the second product that is formed?
Answer: In chemical equations, the number of atoms of each element in the reactants must be the same as the number of atoms of each element in the products. If we count the number of hydrogen atoms in the reactants and products, we find two hydrogen atoms.
Which of the following would most likely cause a chemical reaction to occur at a slower rate?
Answer:
D
Explanation: When you chill a substance when it is mixed with another substance, ( chilled vinegar mixed with sodium bicarbonate will react slower for instance) it reacts slower do to the molecules slowing down when chilled.
[tex]\huge\boxed{Option D}[/tex]
Solution:a liquid mixture in which the the solute which is in a smaller proportion is uniformly distributed within the the solvent which is the major component is called a solution.
_____________________________________Option AStirring the substance together vigorously:It increases the rate of reaction, because when we stir the solute in the solution, the mixed solute particles are distributed more further than when they are left stationary, making the environment (which surrounds the solute) less concentrated by the dissolved solute thus the rate increases and more solute is mixed.
Option BDissolving the reacting substance in water:No, A reacting substances in water are those which can react with water that are Ionic metal. Water is made of ions [tex]H^+ and OH^-[/tex]. Substances(solute), they mix or dissolve more because Solutes ions interact with the ions of a water(solvent), thus breaking the bonds between the solute and then ions of solute form bond with the ions of water. Thus the rate increases in water.
Option CIncreasing the temperature increases the rate of reaction:No, because by the increase in temperature, the kinetic energy of more molecules of a substance increase which results in reaching the threshold energy(minimum energy required by the molecules to change into product) of more molecules. So less molecules are left with low energy.
Option DDecreasing the temperature decrease the rate of reaction.Yes, the rate of reaction decreases because the molecules are slower and collide less. Less molecules make the effective collisions due to which the kinetic energy of molecules is less, so less molecules make up to the threshold energy. So decrease in temperature lowers the rate of the reaction.
_____________________________________Best Regards,'Borz'During free fall which object would have a greater acceleration, an object with a mass of 240 kg or an object with a mass of 10 kg? Explain your answer.
Answer:
Leroy Jeakins
Explanation:
Catus jack f me in the asss
Which of the following best defines an acidic solution?
Answer:
D is the correct answer
Explanation:
A is incorrect because anything above 7 on the PH scale is a base
B is incorrect because anything equal to 7 is neutral
C is incorrect because there is no substance less than 0 on the PH scale.
Hopefully this helps.
We apply the same amount of energy to 10.0-g samples of aluminum, iron, and silver which begin at the same temperature. Rank the metals from highest to lowest temperature after the heat is applied
Answer:
Ag > Fe > Al
Explanation:
The values of the specific heat capacity of the elements are given as;
Aluminum = 0.897 J/g*K
Iron=0.449 J/g*K
Silver=0.235 J/g*K
Specific heat capacity basically refers to how much heat is required to change the temperature of a unit mass of a substance by a degree. Elements with high specific heat capacity would require higher energy compared to elements with lower values,
Aluminium (Al) has the highest specific heat capacity, hence it wold require more energy to cause a change in temperature. Aluminium would be the lowest.
Silver (Ag) has the lowest specific heat capacity hence it would require less energy to cause a change in temperature. Silver wold be the highest.
The middle would be iron (Fe).
The rank is given as;
Ag > Fe > Al
If nitrogen and hydrogen combine in a combustion reaction, what would the product of the reaction be?
CH4 + 2O2 → ____2 + 2H2O
Co2
Explanation:
CH4 (g) + 2 O2 (g) → CO2 (g) + 2 H2O (l)
Answer:
C - CO
Explanation:
Correct on EDGE
CAN U GUYS HELP ME ON THIS ONE PLEAASE IM TOO DUMB YO ANSWER THIS ONE IM NOT EVEN LYING TOO PLUS THIS ASSIGNMENT WAS DUE LAST FRIDAY :(
CH3Br Draw out the work for all 4 steps for the Lewis structure.
Grading Criteria:
a. Correctly count the total valence electrons (2pt)
b. Correctly identify and draw the location of the central atom and surrounding atoms. (2pt)
c. Correctly draw the total amount and location of the electrons on the lewis structure. (2pt)
Answer:
For CH3Br, there are a total of 14 valence electrons. Hydrogen always goes on the outside, and since Carbon is less electronegative than Bromine, we'll put the Carbon in the center and the Bromine on top. We have 14 valence electrons for the CH3Br Lewis structure. Put two between atoms to form chemical bonds.
Explanation:
What is the frequency for a wave with a wavelength of 6.3x10^5
Answer:630000x
Explanation:
6.3x×100000
A sealed can of soda contain a pressure of 1.15 atm at 23°C. What is the new pressure at 79 °C? Report your answer to the hundredths place (two decimal places) You do NOT need units in your answer
Answer:
P₂ = 1.37
Explanation:
Given data:
Initial pressure = 1.15 atm
Initial temperature = 23°C (23+273= 296 K)
Final pressure = ?
Final temperature = 79°C (79+273=352 K)
Solution:
According to Gay-Lussac Law,
The pressure of given amount of a gas is directly proportional to its temperature at constant volume and number of moles.
Mathematical relationship:
P₁/T₁ = P₂/T₂
Now we will put the values in formula:
1.15 atm / 296 K = P₂/352 K
P₂ = 1.15 atm × 352 K / 296 K
P₂ = 404.8 atm. K /296 K
P₂ = 1.37 atm
Transpiration is C. The evaporation of water out of the stomata of plants B. The absorption of water through the roots D. The evaportation of water out of the roots A. Simple diffusion
Answer: Option C.
The evaporation of water out of the stomata of plants
Explanation:
The evaporation of water out of the stomata of plants is transpiration because transpiration is the evaporation or loss of water inform of vapor from the stomata of leaves or flowers. Water is first absorbed by the root and it is moved to plant parts including leaves by xylem vessels since the roots already retained which it can use and when the water get to the leaves, it is loss inform of water vapor.
The chemical name for common salt is
Sodium chloride
commonly known as salt, is an ionic compound with the chemical formula NaCl, representing a 1:1 ratio of sodium and chloride ions. With molar masses of 22.99 and 35.45 g/mol respectively, 100 g of NaCl contains 39.34 g Na and 60.66 g Cl.
Answer:
Sodium chloride
Explanation:
that is the name and the formula is
NaCl
Describe a method to calculate the average atomic mass of using only the atomic masses of
lithium-6=6.01512amu
and lithium-7= 7.01600amu
Answer:
Average amu is 6.52556
Explanation:
Average the numbers
Add the two masses together.
6.01512+ 7.01600= 13.03112
Then divide by 2, we divide by 2 because that is how many #'s we are given.
13.03112/ 2= 6.52556
The table below contains characteristics of four different elements. Characteristics of Four Elements Element Number of Protons Number of Valence Electrons 1 ca 4 2. 11 1 1 3 18 8 4 37 1 1 What conclusion can be made from the information above? Element 3 is a metal and Element 1 is a metalloid. Element 2 is the same element as Element 3. Element 1 has very similar chemical properties as Element 4. Element 2 has very similar chemical properties as Element 4.
Answer:
The correct option is "Element 2 has very similar chemical properties as Element 4"
Explanation:
Both element 2 and element 4 have the same number of valence electrons; meaning they will be found in the same group (group 1) of the periodic table. Elements in the same group of the periodic table exhibit similar chemical properties. For confirmation, element 2 is sodium (based on the atomic number of 11 provided) while element 4 is rubidium (based on the atomic number of 37 provided) - the two elements are found in group 1 of the periodic table.
NOTE: Number of protons is the same as atomic number
A gas is produced when 25 g of substance X is mixed into 60 g of solution Z in a beaker. The mass of the solution in the beaker after the reaction is 75 g. What is the mass of the gas released?
(X + Z -> gas + solution)
mass of the gas = 10 g
Further explanationThe law of conservation of mass :
In a closed / isolated system, the total mass of the substance before the reaction will be equal to the total mass of the reaction product.
Reaction
[tex]\tt X+Z\rightarrow gas+solution[/tex]
mass before reaction=mass after reaction
[tex]\tt 25+60=gas+75\\\\gas=25+60-75=10~g[/tex]
Describe the motion of particles in a substance as thermal energy is added
Answer: it moves faster
Explanation:
When heat is added it gains thermal energy therefore it moves faster as things heat up and it loses thermal energy when it gets cooler causing particles to move slower
help !!!!!!! cell membrane plants information due soon
In a solution, what term is given to the liquid?
Answer: solvent
solvent is A solvent is usually a liquid
Answer: Solvent
Explanation: Everything that dissolves in water and the things which dissolve are called solutes and the liquid in which they dissolve in is called a solvent to form a solution.
Hi can someone help me with this question!
First one to answer it I will make u brainliest
Answer:
Test 2
Explanation:
............................................
Answer:
(B) Test 2
Explanation:
The entire substance changed, and turned into a liquid.
the number of neutrons in an atom can be found by subtracting the atomic number from the what?
Answer:
This approximation of mass can be used to easily calculate how many neutrons an element has by simply subtracting the number of protons from the mass number. Protons and neutrons both weigh about one atomic mass unit or amu. Isotopes of the same element will have the same atomic number but different mass numbers.
Explanation:
Answer:
mass number
Explanation: