Answer:
the molecules strike the walls of the container more often.
Explanation:
The pressure of a gas refers to the force per unit area exerted on the walls of container by gas molecules.
Since the average kinetic energy of gas molecules increases as the temperature of the gas increases, the molecules of the gas tend to strike the walls of the container more often as the temperature of the gas increases.
Hence, the pressure of a gas increases due to an increase in temperature because the gas molecules strike the walls of the container more often.
Evaluate the method of separation to be used.
1. Stones and rice (for cooking)
Answer:
hand picking
Explanation:
as stone is bigger in size we can see them with our eyes so we can handpick it
Answer:
The method of hand picking is used to separate undesirable substances such as small pieces of stones from wheat, rice and pulses. The food grains containing small pieces of stones are taken in a flat container. The pieces of stones are picked up from the grains by hands, one by one, and thrown away.23 Oct 2020
Using the following balanced equation, if you had 48 molecules of O2,
how many molecules of SO3 would you produce?
S8 + 12O2 --> 8SO3
Explanation:
hope this helps u understand:)
Example of POTENTIAL ENERGY:
and
Example of KINETIC ENERGY:
i need help asap plzz i will give 100 points
Answer:
u can g00gle it , just copy nd paste its all there. hope this helps
Explanation:
help chemistry pls answer
What unit is used for atomic mass
Based on your understanding of how bond types influence a material’s properties, identify each of the following compounds as being made of ionic, covalent, or metallic bonds.
ANSWER
Steel: Metalic
Propane: Covalent
Calcium chloride: ionic
Water: Covalent
Edge 2021
Answer: The given compounds are identified as being made of ionic, covalent, or metallic bonds:
Steel - Metallic bondsPropane - Covalent bondsCalcium chloride - Ionic bondsWater - Covalent bondsExplanation:
A bond formed by transfer of electrons from one atom to another is called an ionic bond. An ionic bond is formed between a metal atom and a non-metal atom.
A bond formed by transfer of electrons from one atom to another is called a covalent bond. A covalent bond is formed between two or more non-metal atoms only.
Steel is actually an alloy of carbon and iron where there is less than 2% carbon, 1% manganese and small amounts of silicon, phosphorus, oxygen and sulphur are present.
When atoms of metals are held together then bond formed between these atoms is called metallic bond.
Hence, steel is made of metallic bond.
Chemical formula of propane is [tex]CH_{3}CH_{2}CH_{3}[/tex] as there are only non-metal atoms are present. So, sharing of electrons takes place in such atoms due to which covalent bonding will be there.
Hence, propane is made up of covalent bonds.
Calcium chloride contains a metal and a non-metal atom. This means that electrons are being transferred from calcium atom to the chlorine atom. Hence, bond present in calcium chloride is ionic bond.
Water has chemical formula [tex]H_{2}O[/tex]. Since, non-metal atoms are present there so sharing of electrons takes place between hydrogen and oxygen atoms. Hence, covalent bond is present in water.
Thus, we can conclude that given compounds are identified as being made of ionic, covalent, or metallic bonds:
Steel - Metallic bondsPropane - Covalent bondsCalcium chloride - Ionic bondsWater - Covalent bondsSteel: ✔ metallic
Propane: ✔ covalent
Calcium chloride: ✔ ionic
Water: ✔ covalent
How many milliliters of 1.5 M H.So, are needed to exactly
neutralize 20. milliliters of a 0.8 M KOH solution?
Answer: A volume of 10.66 mL of 1.5 M H is required to exactly neutralize 20. milliliters of a 0.8 M KOH solution.
Explanation:
Given: [tex]M_{1}[/tex] = 1.5 M, [tex]V_{1}[/tex] = ?
[tex]V_{2}[/tex] = 20 mL, [tex]M_{2}[/tex] = 0.8 M
Formula used to calculate the volume is as follows.
[tex]M_{1}V_{1} = M_{2}V_{2}[/tex]
Substitute the values into above formula as follows.
[tex]M_{1}V_{1} = M_{2}V_{2}\\1.5 M \times V_{1} = 0.8 M \times 20 mL\\V_{1} = 10.66 mL[/tex]
Thus, we can conclude that a volume of 10.66 mL of 1.5 M H is required to exactly neutralize 20. milliliters of a 0.8 M KOH solution.
Let's start by figuring out the amount in miles. From there, we can easily find the equivalent mass. Which equation do we need to find out how many moles of NH4Cl would there be in 500 mL of a 0.300 M solution of it?
A. n=C x V
B. C=V x n
C. C=n x V
D. n=C / V
Answer:
A. n= C x V
Explanation:
Molarity of a solution is the molar concentration of that solution. It can be calculated using the formula:
M = n/V
Where;
M = molarity (M)
n = number of moles (n)
V = volume (mL)
To calculate the number of moles from a given molarity value and volume, we say:
n = M × V
For this case of NH4Cl;
V = 500mL = 500/1000 = 0.5L
M = 0.300 M
n = 0.300 × 0.5
n = 0.15moles
Answer: n=CxV
Explanation:
9. Which of the following is a nucleotide found in DNA?
1
O
deoxyribose sugar, phosphate, nitrogenous base
ribose sugar, amino acid, nitrogenous base
ribose sugar, phosphate, nitrogenous base
deoxyribose sugar, amino acid, nitrogenous base
Match the following quantities
-
6.02 x 1023 atoms of Al
-
1 molecule of N2O
-
6.02 x 1023 molecules of C2H4
-
1 atom of Au
A.
28.05 g
B.
26.98 g
C.
44.01 u
D.
196.97 u
Answer:
C.44.01 u
Explanation:
basta ayan yong answer ko
the rows from left to right in the periodic table is called what
Answer:
The periodic table has rows that go left to right and columns that go up and down, just like any other grid. The rows are referred to as PERIODS, while the columns are referred to as GROUPS.
Explanation:
Please help!!!!!!!!!!!!!!!!!!!
Answer:
Hydrochloric acid + calcium hydroxide = calcium chloride + water
An apple has been left out, and it is starting to rot. Which of the following is the best method to slow down the chemical changes that are occurring?
The best method is to keep rinsing the apple with water every hour.
The best method is to keep the apple in a cooler place.
The best method is to put the apple in the sun to warm it up.
The best method is to wrap the apple in plastic.
Consider the redox reaction below talking place in certain electro chemical cell: Cu(s)+cu^2+(aq) -------> Cu^2+(aq) + Cu (s)
Answer:
cu+2 ------ oxidation whereas Cu ------ reduction.
Explanation:
In the reaction, cu+2 is the place where oxidation occurs because this cupric ion losses electrons which causes +2 charge on it. we know that oxidation is the loss of electrons and reduction is the gaining of electrons so the Cu is the place or atom at which reduction occurs. Electrochemical cells have two electrodes, which is anode and the cathode. The anode is the electrode where oxidation occurs whereas the cathode is the electrode where reduction takes place.
PLEASE HELP WILL GIVE LOTS OF POINTS!!!!!!!!!!!! What is the daughter particle if Uranium -234 undergoes beta decay? Write your answer in isotopic notation.
Answer:
Given nuclide is uranium-234.
If it undergoes beta decay then, what will be the daughter particle?
Explanation:
The beta particle decay increases the atomic number of the nuclide by one.
There is no change in the mass number of the nuclide.
The decay of beta particle from Uranium-234 is shown below:
It forms Np-93.
What is the concentration of a solution made by combining 52 grams of NaCH3COO with 150 mL of water?
Answer: The concentration of a solution made by combining 52 grams of [tex]NaCH_{3}COO^{-}[/tex] with 150 mL of water is 4.22 M.
Explanation:
Given: Mass = 52 grams
Volume = 150 mL (1 mL = 0.001 L) = 0.150 L
Molarity is the number of moles of a substance present in liter of a solution.
And, moles is the mass of a substance divided by its molar mass.
Hence, moles of [tex]NaCH_{3}COO^{-}[/tex] (molar mass = 82.034 g/mol) is as follows.
[tex]Moles = \frac{mass}{molar mass}\\= \frac{52 g}{82.034 g/mol}\\= 0.633 mol[/tex]
Therefore, concentration of given solution is as follows.
[tex]Molarity = \frac{moles}{Volume(in L)}\\= \frac{0.633 mol}{0.150 L}\\= 4.22 M[/tex]
Thus, we can conclude that the concentration of a solution made by combining 52 grams of [tex]NaCH_{3}COO^{-}[/tex] with 150 mL of water is 4.22 M.
Why would the electrolysis reaction stop if the battery was removed
If the battery was removed, the energy produced by the battery would not be able to continue its path along the circuit.
In relation to the reactants of a chemical reaction, the products are
Answer:
the products are the substances made after the chemical reaction has happened
Explanation:
The pH of a solution with a [OH-] of 1x10^-6 is
Answer:
pH = 6
Explanation:
Given that,
The concentration of [OH]⁻ ion is [tex]10^{-6}[/tex].
We need to find the pH of the solution.
We know that,
[tex]pH=-\log[OH]^-[/tex]
Put all the values,
[tex]pH=-\log(10^{-6})\\\\pH=6[/tex]
Hence, the pH of the solution is 6.
Balance the equation above please
Answer:
Balanced Equation:-Al2(CO3)3. ---heat---> Al2O3 + 3 CO2
Answer:
everything can be found in the picture
what are some different natural events and man-made activities that can affect ocean acidification?
Ocean acidification is the process of decreased pH levels of the oceans. The burning of fossil fuels and industrialization are man-made activities that lead to this process.
What is Ocean acidification?Ocean acidification is an increased concentration of acidic components of the oceans due to an increase in the carbon dioxide level of the oceans.
Human activities like cutting down a large number of trees, discharging from industrial outlets, and burning fossils like petrol, coal, diesel, etc. are leading to increased acidification of the oceans.
Therefore, natural causes like increased salinity, flood, and earthquake are the reasons for oceanic acidification.
Learn more about ocean acidification here:
https://brainly.com/question/7604502
_______ are events that disrupt the stability of a whole ecosystem.
A.Resources
B.Disturbances
C.Species
Number of molecules in 16 grams of h2co3
For this one u can work out the amount of moles in h2co3 by using moles=mass/mr(of h2co3 is 52)
so 16/62=0.258moles then u use the equation
number of particle = moles × 6.02×10^23
=0.258×6.02 ×10^23
=1.55×10^23 molecules.
hope this helps
A reaction requires 22.4 L of gas at STP . There are 25.0 L of gas at 101.5 kPa and 373 K.
Which statement is true?
Use the ideal gas law: PV = nRT where R = 8.31 L-kPa/mol-K
A. There is not enough gas for the reaction.
B. Given this information, there is no way to tell if there is enough gas for the reaction.
C. There is excess gas for the reaction.
D. There is enough gas for the reaction.
Answer:
STP is 101.325 kPa pressure and 273K temperature
Also, at STP, 1 mol of an ideal gas = 22.4 L
Since the question states that 22.4 L are needed at STP, we know that ONE MOLE is needed. Now, the question is, how many moles are actually present?
V = 25.0 L
P = 101.5 kPa
T = 373K
n = ?
R = 8.31 L-kPa/Kmol
Solving the ideal gas law for n (moles) and comparing that to 1 mole, we have...
n = PV/RT = (101.5)(25.0)/(8.31)(373)
n = 0.82 moles of gas. THIS IS NOT ENOUGH as it is less than the ONE mole required.
Explanation:
What is the SI unit of mass
Answer:
kg or kilograms
Explanation:
Answer: Kilogram (kg)
Explanation: The SI unit of mass is the kilogram (kg). It is equal to the mass of the international prototype of the kilogram and it is defined as the mass of platinum-iridum (Pt-Ir).
¿Cual es la sustancia que puede causar la muerte? (Estoy poniendo cualquier cosa para registrarme) 3
Answer:
Veneno.
Explicación:
El veneno es la sustancia que puede causar la muerte porque el veneno destruye las células que entran en contacto con el veneno. Si el veneno causa menos daño por lo que no ocurre la muerte del paciente mientras que por otro lado, si el veneno entra en contacto con los órganos vitales y causa más destrucción, el paciente eventualmente morirá, por lo que podemos decir que las sustancias tóxicas y venenosas causan daño y muerte. de la gente.
Aqueous solutions of a strong acid and a weak acid of equal concentrations are compared. Which of the following statements are true?
I. The strong acid reacts with a metal oxide but the weak acid does not
II. The weak acid is less disassociated than the strong acid
III. The strong acid has a greater conductivity that the weak acid.
Answer:
Explanation:
. If you have 5.42 x 1024 aluminum atoms, approximately how many moles is that?
Please help me
Answer:
5.42x10^24 atoms/1 x 1 mole/6.022x10^23
= 9.5 mol
If the power source in a motor was to be replaced with an electrical load, and the armature was turned by hand, then what device have you made?
Answer:
This question doesnt make much sense but ill try to answer it.
A brushed DC electric motor is an internally commutated electric motor designed to be run from a direct current power source. Brushed motors were the first commercially important application of electricity. If the shaft of a DC motor is turned by an external force, the motor will act as a generator. DC Motor rotation does have to do with the voltage polarity and the direction of the current flow.