lisa works as a system analyst for a small company. she is doing testing of a few applications in her system, and hence created a lot of restore points as a measure of backup. she observes that these restore points have taken up a large amount of her disk space and are making her system slow. which of the following utilities will you use to resolve this problem?

Answer:

Edge computing is a type of distributed computing that brings computing and data storage closer to the edge of the network, or closer to the devices and sensors that generate and collect data. This can help improve sustainability in a number of ways:

Energy efficiency: By bringing computing and data storage closer to the source of data, edge computing can reduce the amount of energy required to transmit and process data. This can help reduce carbon emissions and other environmental impacts.

Resource conservation: Edge computing can help reduce the demand for resources such as water and raw materials by enabling more efficient and targeted use of resources. For example, edge computing can be used to monitor and optimize irrigation systems in agriculture, or to optimize energy consumption in buildings.

Transportation: Edge computing can help reduce transportation emissions by enabling more efficient and targeted use of transportation resources. For example, edge computing can be used to optimize delivery routes or to monitor and control traffic flow in real-time.

Waste reduction: Edge computing can help reduce waste by enabling more efficient and targeted use of resources. For example, edge computing can be used to monitor and optimize industrial processes, or to predict and prevent equipment failures.

Overall, edge computing has the potential to help improve sustainability by enabling more efficient and targeted use of resources, reducing energy and resource consumption, and minimizing waste.

Explanation:

c) (int p = 1; p < data.length - 1; p++) can replace /* missing loop header */ so the method count Peaks works as intended,

What is loop ?

A loop is a set of instructions that are repeatedly carried out until a specific condition is met in computer programming. In most cases, a given procedure, such as collecting data and modifying it, is followed by a condition check, such as determining whether a counter has reached a predetermined number.

(int p = 1; p < data.length - 1; p++) can replace /* missing loop header */ so the method countPeaks works as intended.

This loop header will start the loop at the second element of the array (index 1) and end the loop at the second-to-last element of the array (index data.length - 2). This is because we don't want to check the first or last element of the array for local maximum values, as they have only a single adjacent element.

The other options are not suitable because they either start the loop at the wrong position (options a and e), end the loop at the wrong position (options a and d), or use the incorrect spelling of "length" (options c). Option c is the only one that starts the loop at the second element of the array and ends the loop at the second-to-last element of the array, making it the correct choice.

To know more about loop checkout  https://brainly.com/question/14390367

#SPJ4

The option that is the MOST likely cause of this issue is option A: The coffee shop was experiencing power fluctuations that led to the flickering of the display.

There are a few potential causes for a flickering display on a laptop when it is plugged into a power outlet:

Lastly, Software issues: The flickering could be caused by a problem with the operating system or other software on the laptop.

Learn more about laptop's touchscreen from

https://brainly.com/question/29676208
#SPJ1

See full question below

You are traveling to Thailand on a business trip. Your laptop's touchscreen display is visibly flickering when plugged into the power outlet at a local coffee shop. You take your laptop to your hotel room, and you notice it doesn't flicker when plugged in there. Which of the following is the MOST likely cause of this issue?

Options are :

The coffee shop was experiencing power fluctuations that led to the flickering of the display

The digitizer of the laptop is faulty

The inverter of the laptop is faulty

The battery of the laptop is failing to charge

Answer:

To increase the speed of your laptop, you should consider installing additional Random Access Memory (RAM). RAM is a type of computer memory that is used to store data that is being actively used or accessed by the system. The more RAM a computer has, the more data it can store in memory and the faster it can access and use that data.

When choosing additional RAM for your laptop, there are a few things you should consider:

Compatibility: Make sure the RAM you choose is compatible with your laptop's hardware and operating system. You can check the specifications of your laptop to determine the type of RAM it supports (e.g. DDR4, DDR3, etc.) and the maximum amount of RAM it can handle.

Capacity: Consider how much additional RAM you need to improve the performance of your laptop. If you are using resource-intensive applications or running multiple programs at once, you may want to install more RAM to help your laptop handle the load.

Speed: Look for RAM with a higher speed rating, as this can help improve the performance of your laptop. However, keep in mind that faster RAM may also be more expensive.

In summary, to speed up your laptop, you should install additional RAM that is compatible with your laptop's hardware and operating system, has sufficient capacity to meet your needs, and has a high speed rating.

Explanation:

In the /etc/profile.d/ directory, add the scripts that configure the environment variables for your team. Script administrators can set extra system-wide variables in the /etc/profile.d/ directory, which acts as a storage repository.

Secure Shell Protocol (SSH) is a name for it. When managing Unix-like systems, it is most frequently utilized. Linux is among them.

Linux administration includes the installation and configuration of applications as well as the backup and restoration of files, disaster recovery, new system builds, automation, user maintenance, filesystem cleanliness, and system security and storage management.

To know more about  Linux server visit :-

https://brainly.com/question/28514137

#SPJ4

The relationship between culture and cybersecurity and cybercrimes has been suggested in earlier studies (Kshetri, 2005, 2006, 2009a; 2010a, b, c, d; 2013a, b, c, d; 2014a, b). Governments, businesses, victims, and hackers are examples of significant players whose behaviors are influenced by cultural norms.

Cybercrime refers to any illegal behavior that involves, targets, or otherwise involves a computer, computer network, or networked device. Most cybercrimes are performed by hackers or cybercriminals who are motivated by financial gain.

Any illegal behavior that utilizes a computer, networked device, or network is considered a cybercrime. While the majority of cybercrimes are committed in order to profit the perpetrators.

To know more about cybersecurity visit :-

https://brainly.com/question/28112512

#SPJ4

At the point when you got this sort of mistake, you can definitely relax! Adhere to the directions in the techniques underneath to just purpose Windows Update blunders 0x80070002.

The time settings have a significant impact on the Windows update, and details are the key to success. Simply checking the settings for the date and time could solve your issue:

After selecting "Control Panel," open "Date and Time," select "Change date and time" and make any necessary adjustments; select your time zone before pressing OK; select "Internet Time" before selecting "Change Settings"; select "Synchronize with an Internet time server"; press "Update Now" twice; close all open windows; and then restart your computer before accessing Windows Update. If your system had the incorrect time set, the 0x80070002 error should be fixed by following the above instructions.

Solution Check and Remove the Corrupted System Files If the quick fix does not work, you should scan your system to see if any files are corrupted.

Scan and Check the Corrupted System Files First, click the Windows icon and type cmd. Next, right-click the command prompt and select Run as Administrator. Type "SFC /scannow" and press enter. Try running Windows Update once more if you get the message that everything went well. If you get an error saying that corrupted files were found but cannot be fixed, please try to remove the corrupted files. Second, Remove the Corrupted Windows Update Files .Select "Control Panel" by selecting "Start." Type "Managerial Devices" in the pursuit box and press Enter.

Double-click "Service" in the pop-up windows. When asked for the administrator password or confirmation, enter the password and confirm.

After sorting the items alphabetically using the "Name" tab, you can quickly locate the Windows Update service. Select Stop by right-clicking on it.

If deleting system files does not help, you can eliminate the software distribution folder to resolve the 0x80070002 error.

To know more about WINDOWS UPDATE  visit

brainly.com/question/29990978

#SPJ4

C) Asymmetric-key encryption uses a public key and a private key to allow users to communicate securely.

What is Asymmetric-key encryption?

A public key and a private key, which are connected mathematically, are used in asymmetric encryption for encryption and decryption. The associated private key is used for decryption if the public key is utilised for encryption. The associated public key is used for decryption if the private key is employed for encryption.

Asymmetric-key encryption, also known as public-key encryption, uses a public key and a private key to allow users to communicate securely.

In asymmetric-key encryption, each user has a pair of keys: a public key and a private key. The public key is used to encrypt messages that are sent to the user, and the private key is used to decrypt those messages. The private key is kept secret by the user, while the public key is shared with others.

To send a secure message to another user, the sender uses the recipient's public key to encrypt the message. The recipient can then use their private key to decrypt the message. Because the private key is kept secret, only the intended recipient is able to decrypt the message, ensuring that the communication is secure.

To know more about Asymmetric-key encryption checkout  https://brainly.com/question/8455171

#SPJ4

One could produce 840 4-letter passwords. There are a total of 12 different arrangements for men and women to sit in a row apart from one another, based on the factors three, two, four, two, one, and one.

When repetition is allowed and the letters are distinct, the answer is 4 * 4 * 4 = 43 = 64. If there is no room for repetition and the letters stand out, then 4 * 3 * 2 equals 24.

There are 240 possible options for the remaining numbers (2,5, 3,6, and 4). 240 x 4 = 960 different ways are possible.

To know more about four-letter passwords visit :-

https://brainly.com/question/2280026

#SPJ4

Method that returns the index of the smallest element in an array of integers: Import java.util.Scanner; public class ArrayTest { public static int indexOfsmallestElement (double[] array) { int min=0; //itearating element by element and checking smallest element for(int i=0;i<array. length;i+

An array is an ordered list of values ​​referenced by name and index. For example, consider an array named emp containing employee names indexed by numeric employee number. So emp[0] is employee number 0, emp[1] is employee number 1, and so on.

Iterates through the array from 0 to the length of the array and compares the min value to the elements of the array. If an element is less than min, min contains the value of that element. Finally, min represents the smallest element in the array.

If no such index is found, print -1. So i = 1 is the desired index.

To learn more about index of an element visit:

https://brainly.com/question/9413922

#SPJ4

A.  i < list[list.length]  The program includes individual variables to store the names of each student rather than a single list of students.

The categorization of data items is known as a data type. It addresses the sort of significant worth that determines what tasks can be performed on a specific information. In Python programming, everything is an object. Data types are classes, and variables are instances (objects) of these classes.

Python has the following data types built-in by default, in these categories:

Text Type:               str

Numeric Types:     int, float, complex

Sequence Types:       list, tuple, range

Mapping Type:     dict

Set Types:             set, frozenset

Boolean Type:     bool

Binary Types: bytes,  bytearray, memoryview

None Type:             NoneType

Python List Data Type

The rundown is a flexible information type select in Python. It is similar to the C/C++ array in some ways. But the list in Python is interesting because it can hold multiple types of data at once. A formal list is an ordered sequence of data enclosed within commas and square brackets ([]).

The data in a Python Dictionary are arranged in a key-value pair format. It is like the hash table sort. Curved braces are used to write dictionaries in the form key: value. Optimized data retrieval from a large amount of data is extremely useful.

To know more about Python List Data Type visit

brainly.com/question/17738995

#SPJ4

Answer:

It is generally a good practice to follow a specific order when connecting cables to a network switch. This helps to maintain a logical and organized layout for the cables, which makes it easier to identify and troubleshoot any issues that may arise.

One way to organize the cables on a network switch is to start with the network endpoints (such as computers, printers, and other devices) on the first few ports and work your way up. This allows you to easily locate and access the endpoints when needed.

For trunk lines (such as those connecting the switch to other switches or routers), it is generally recommended to start from the last few ports and work your way backwards. This helps to keep the trunk lines separate from the endpoint cables, which can make it easier to identify and troubleshoot any issues that may arise.

It is important to note that these are general guidelines and may vary depending on the specific requirements and needs of your network. It is always best to consult with your organization's IT department or guidelines to determine the best practices for cable management on your network.

A code where given a number, the method evenlydivisibleby should return an array containing numbers that will go into the given number evenly, is given below.

An array is a group of related data elements kept in close proximity to one another in memory. The only way to access each data element directly is by using its index number, making it the most basic data structure.

There is no need to define separate variables for each subject, for example, if we want to store a student's grades across five subjects. Instead, we can create an array that will keep the data elements in close proximity to one another in memory.

Marks[0] denote the marks scored in the first subject, Marks[1] denote the marks scored in the second subject, and so on. Marks[5] define the marks scored by a student in 5 different subjects, where each subject's marks are located at a specific location in the array.

↓↓//CODE//↓↓

public boolean evenlyDivisibleby(int a, int b)

{

 /*check if either a=0 or b=0 or a&b are not evenly divisible and return false if any of these conditions is true*/

 if(a==0 || b==0 || a%b!=0) return false;

 else return true; //If neither of the above conditions are true, return true

}

Learn more about array

https://brainly.com/question/28565733

#SPJ4

Answer:

Explanation:

#include

int main()

{

int n, sum = 0;

printf("Enter a five digit number: ");

scanf("%d", &n);

while (n != 0) {

sum = sum + n % 10;

// removing last digit from number

n /= 10;

}

printf("Sum of digits: %d",sum);

return 0;

}

Answer:

# Get the input from the user

userText = input()

fourthChar = input()

# Replace the fourth character of the string with the new character

userText = userText[:3] + fourthChar + userText[4:]

# Print the modified string

print(userText)

Explanation:

This code first gets the input from the user and stores it in the userText and fourthChar variables. It then uses string slicing to replace the fourth character of the string with the new character. Finally, it prints the modified string.

The input string is cheetah, and the fourth character is e. The code replaces this character with the new character v, resulting in the modified string chevtah.

The predicted slope, b (the regression coefficient calculated from the sample), and the population slope,, are separated from one another approximately by the standard error of the slope coefficient, Sb.

The standard error of the mean, or simply standard error, indicates how likely it is that the population mean will differ from a sample mean. It demonstrates how much the sample mean would vary if the same study were conducted again using new samples taken from the same population.

The standard error of the regression (S), also known as the standard error of the estimate, displays the average distance between the observed values and the regression line. Conveniently, Using the units of the response variable, it indicates the average degree of error of the regression model.

To know more about standard error visit:-

https://brainly.com/question/16631965

#SPJ4

If you are taking photographs that are consistently too dark, adjusting the following variables could help address the problem:

Shutter speed: By lowering the shutter speed, more light will be let into the camera, which will aid to brighten the image.

Aperture: By allowing more light to enter the camera and brightening the image, the aperture can be made larger (by using a lower f-number).

Increased ISO will increase the camera's sensor's sensitivity to light, which may help the image appear brighter.

Adjusting the focus length is one of the stated variables that would not solve the issue of the photos being too dark. The field of view and magnification of the image are determined by the focal length, however the exposure of the image is unaffected.

To know more about Photograph kindly visit
https://brainly.com/question/25379778

#SPJ4

Enthalpy Changes the overall energy change in the substance portrayed in the graph at  48°C.

Mass (m) = 0.3 Kg

Initial temperature (T1) = 20°C

Heat (Q) added = 35 KJ

Specific heat capacity (C) = 4.18 KJ/Kg°C

Final temperature (T2)

The final temperature of water can be obtained as follow:

Q = MC(T2 – T1)

35 = 0.3 x 4.18 (T2 – 20)

35 = 1.254 (T2 – 20)

Clear the bracket

35 = 1.254T2 – 25.08

Collect like terms

1254T2 = 35 + 25.08

1.254T2 = 60.08

Divide both side by the coefficient of T2 i.e 1.254

T2 = 60.08/1.254

T2 = 47.9 ≈ 48°C

Therefore, the final temperature of the water is 48°C.

Learn more about temperature on:

https://brainly.com/question/11464844

#SPJ1

The project lifecycle model that is most suited for the project is called linear project management life cycle model. This is because The linear life cycle is best suited for initiatives with clear objectives from the beginning.

The development of the initial concept through the deployment of an end result, output, or advantages are all divided into separate phases in a linear (waterfall) life cycle. High structure, predictability, and stability are the goals of this strategy.

Therefore, one can say that Fixed needs are provided for the project via linear life cycle models. The project's total cost and work volume have been defined and are not expected to vary at any point during the process. As a result, it reduces the requirement for unforeseen expenses or tasks that crop up mid-project.

Learn more about project lifecycle model from

https://brainly.com/question/14472908
#SPJ1

At the body level and with Outline view enabled, you create a subdocument in the master document.

Click Disconnect. The selected subdocuments' content is combined with the main document and is now a part of the main document. It is advised that you remove the files from the subdocuments that were merged into the main document.

The outline view is required in order to use the master and sub documents. Changing to Outline View Pick the View tab first. Word surrounds each subdocument (or link to a subdocument) with a box and an icon in the upper left corner.

To know more about master document visit :-

https://brainly.com/question/15627895

#SPJ4

The correct answer to the given question about excel formula is option b ) COUNTIF(B2:B12,"<50") + COUNTIF(C2:C12">3")

An expression that modifies cell values is referred to as a formula in Microsoft Excel. These formulas nevertheless produce a result even in the case of an error. With the aid of Excel formulas, calculations such as addition, subtraction, multiplication, and division can be made. Microsoft has produced the spreadsheet application Excel for Windows, macOS, Android, and iOS. In addition, it contains pivot tables, graphing tools, calculation capabilities, and a macro programming language called Visual Basic for Applications (VBA). One of the programs in Microsoft Office is Excel. The core components of all spreadsheets are present in Microsoft Excel, including a grid of cells arranged in numbered rows and letter-named columns to manage data manipulations such arithmetic operations.

To learn more about Microsoft Excel click here

brainly.com/question/24202382

#SPJ4

Using knowledge in computational language in EXCEL it is possible to write a code that insert an IF function that compares to see if Yes or No is located in the Rental Car.

E13 =IF(C13="No",$F$2,$F$4) copy down to E18

F13 =VLOOKUP(B13,$A$7:$B$10,2,0)*$B$5 copy down to F18

H13 =SUM(D13:G13) copy down to H18

I2 =AVERAGE(H13:H18)

I3 =MIN(H13:H18)

I4 =MAX(H13:H18)

VLOOKUP stands for Vertical Lookup. As the name specifies, VLOOKUP is a built-in Excel function that helps you look for a specified value by searching for it vertically across the sheet. VLOOKUP in Excel may sound complicated, but you will find out that it is a very easy and useful tool once you try it.

See more about EXCEL at brainly.com/question/28499437

#SPJ1

C.)  count < 5 is sometimes true/sometimes false at point 2 using while loop

In programming, the while-loop statement is a conditional looping statement that runs a block of code if one or more conditions are met.

The while loop in the program would initially set the count variable's value to zero, but if the count variable was less than five, the while loop would stop and the code block would not be executed until the count was equal to five.

The while loop in Java is used to repeatedly iterate over a portion of the program until the specified Boolean condition is met. The loop automatically stops when the Boolean condition changes to false. The while loop is regarded as an if statement that repeats itself.

The condition is evaluated first in a while loop, and if it returns true, the statements inside the loop are executed. The control exits the while loop and proceeds to the following statement when the condition returns false.

To know more about While loop visit

brainly.com/question/15172842

#SPJ4

Options A & D code segments assign the correct number of bonus points to the bonus for all possible values of the timer.

What are code segments?

In computing, an executable instruction-containing piece of an object file or the corresponding area of the program's virtual address space is referred to as a code segment, sometimes known as a text segment or simply as text. The non-coding portions are known as introns, while the coding segments are known as exons.

A code segment is a section of a computer file that contains object code or a similar segment of the program's address space that contains information on executable commands and directives. In the world of computing, a code segment is sometimes referred to as a text segment or, simply, as text.

To learn more about code segments, use the link given
https://brainly.com/question/25781514
#SPJ4

It is probably best to avoid representing drug dosage as an object. You are creating an application to aid a veterinary hospital.

A single concept or item from the problem domain should be represented by each class.

A customer who borrows money from a bank owes the bank money. Any time a loan or advance is involved, the banker is the creditor and the client is the debtor. When someone deposits money with a bank and then borrows money from the same bank, this is the first instance in which the relationship is reversed.

To know more about designing  application visit :-

https://brainly.com/question/14913946

#SPJ4

Artificial intelligence technologies does cad incorporate to achieve this..

Describe artificial intelligence in plain terms?

In order to simulate how the human mind makes decisions and solves problems, artificial intelligence uses computers and other devices.        

                                Artificial general intelligence (AGI), which is on par with human skills, artificial superintelligence (ASI), which is more intelligent than a human, or artificial narrow intelligence (ANI), which has a limited range of abilities.

What does artificial intelligence serve?

With the aid of artificial intelligence (AI), machines may mimic human behavior and learn from their mistakes as well as adapt to new inputs.  

                     Today's examples of AI, such as chess-playing machines and self-driving automobiles, mainly rely on deep learning and natural language processing.

Learn more about Artificial intelligence

brainly.com/question/22678576

#SPJ4

Sql allows users to isolate specific information contained in a database, as well as to aid in the selection, creation, addition, and extraction of data from a database. sql stands for Structured query language.

To learn more about Structured query language refer to:

https://brainly.com/question/28579489

#SPJ4

Answer:

To create a new data frame with only the Rating, Cocoa.Percent, and Company.Location variables using the select() function, you can use the following code:

Code:

# create a new data frame with only the Rating, Cocoa.Percent, and Company.Location variables

trimmed_flavors_df <- flavors_df %>%

select(Rating, Cocoa.Percent, Company.Location)

In this code, the trimmed_flavors_df variable will be assigned a new data frame that contains only the Rating, Cocoa.Percent, and Company.Location columns from the flavors_df data frame.

I hope this helps! Let me know if you have any questions.

There is a logic error in Line 2 (for i in range(4):)

What is a logic error?

A logic mistake, as used in computer programming, is a flaw in a program that makes it run erroneously but does not cause it to end unexpectedly. Even though it might not be immediately apparent, a logic error results in unwanted or undesirable output or other behavior. For instance, saying "Get me a cup of coffee." when what was really meant to be "Get me a cup of tea."

A logic error is a programming mistake that results in unexpected and incorrect behavior. A program's output may be wrong as a result of a logic error, which is categorized as a type of runtime error. Additionally, it might result in a running software crash.

To learn more about a logic error, use the link given
https://brainly.com/question/28957248
#SPJ4

Option a: Because all incoming and outgoing requests must be translated, NAT filters unwanted packets sent by attackers. This gives the opportunity to authenticate incoming requests and set rules to stop some attacks.

NAT permits the utilization of Private IP address inside a company and these IP address can be reused in other confidential organizations.

Option c) Because the specific method by which it is encrypted is unknown, it is not completely secure and cannot be detected in the network. Additionally, it is vulnerable to man in the middle attacks.

Option a) Drive by hacking or war driving is not against the law because these services are in charge of pulling data from a variety of sources and making it possible to obtain updated results from a variety of web sources. Drive by hacking is a method for gaining unauthorized access to that network, while war driving is a method for sniffing out networks that are not protected.

To know more about NAT visit

brainly.com/question/30048546

#SPJ4