light travels approximately 982,080,000 ft/s, and one year has approximately 32,000,000 seconds. A light year is the distance light travels in one year.

Answers

Answer 1

Answer:

The distance traveled in 1 year is: [tex]3.143*10^{16}ft[/tex]

Explanation:

Given

[tex]s = 982,080,000 ft/s[/tex] --- speed

[tex]t = 32,000,000 s[/tex] --- time

Required

The distance traveled

This is calculated as:

[tex]Speed = \frac{Distance}{Time}[/tex]

So, we have:

[tex]Distance = Speed * Time[/tex]

This gives:

[tex]Distance = 982,080,000 ft/s * 32,000,000 s[/tex]

[tex]Distance = 982,080,000 * 32,000,000ft[/tex]

[tex]Distance = 3.143*10^{16}ft[/tex] -- approximated


Related Questions

Give 2 reasons for fitting heavy commercial vehicles with many tyres​

Answers

As we know larger the area of contact lesser the pressure. So, in order to reduce the pressure heavy vehicles have broad tyres to increase the area of contact with the ground. Heavy vehicles have broad tyres because broad tyres have large area of contact and less pressure on the ground.

mark me brainliesttt pls :)))

Calculate the spring constant of the spring in a child's pogo stick if the child has a mass of 32 kg and bounces once every 2.7 seconds

Answers

Answer:

The spring constant is 173.12 N/m.

Explanation:

mass, m = 32 kg

Period, T = 2.7 s

let the spring constant is K.

Use the formula of period,

[tex]T = 2\pi\times \sqrt \frac{m}{K}\\\\2.7 =2\times 3.14\sqrt\frac{32}{K}\\\\K = 173.12 N/m[/tex]

1.A motor is rated at 1.5 hp. At what speed in m/s can this motor raise a
200 kg load?

2. A bucket of water with a total weight of 50 Newtons is lifted at constant
velocity up a 10 meter deep well. If it takes 20 seconds to raise the bucket
this distance, what is the power required to lift the bucket?​

Answers

Answer:

1. 0.57 m/s

2. 25 Watts

Explanation:

1. Determination of the speed.

We'll begin by converting 1.5 hp to watt (W). This can be obtained as follow:

1 hp = 745.7 W

Therefore,

1.5 hp = 1.5 hp × 745.7 W / 1 hp

1.5 hp = 1118.55 W

Next, we shall determine the force. This can be obtained as follow:

Mass (m) = 200 Kg

Acceleration due to gravity (g) = 9.8 m/s²

Force (F) =?

F = m × g

F = 200 × 9.8

F = 1960 N

Finally, we shall determine the speed. This can be obtained as follow:

Power (P) = 1118.55 W

Force (F) = 1960 N

Speed (v) =?

P = F × v

1118.55 = 1960 × v

Divide both side by 1960

v = 1118.55 / 1960

v = 0.57 m/s

Thus, the speed is 0.57 m/s

2. Determination of the power.

We'll begin by calculating the velocity. This can be obtained as follow:

Displacement = 10 m up

Time = 20 s

Velocity =?

Velocity = Displacement / time

Velocity = 10 / 20

Velocity = 0.5 m/s

Finally, we shall determine the power. This can be obtained as follow:

Velocity (v) = 0.5 m/s

Force (F) = 50 N

Power (P) =?

P = F × v

P = 50 × 0.5

P = 25 Watts

Therefore, the power required to lift the bucket is 25 Watts

Describe two 'beneficial' aspects from the last 10,000 years of humanity, as well as two 'dis-advantageous' aspects. Agriculture should be your guiding point here.

Answers

Answer:

Two beneficial aspects of the last 10,000 years of mankind have been the development of writing and the development of civilized communities.

Thus, writing has allowed the recording of the different historical events that have taken place during the development of humanity, setting precedents for subsequent generations, allowing documenting the progress that humanity has been achieving. On the other hand, the development of civilized communities around urban systems has allowed for greater economic and social development on the part of human groups, which through cooperation have been acquiring an increasingly higher quality of life.

On the other hand, two negative aspects of these years have been the world overpopulation and the pollution of the planet.

Thus, the amount of the world's population has been getting closer and closer to the limit of our planet's carrying capacity, which could lead humanity to a point where resources are definitely scarce, causing famines and various catastrophes. On the other hand, the pollution arising from the development of industrial societies has notably undermined the health of individuals and has damaged their standard of living, while causing irreparable damage to the natural environment.

PLS ANSWER FAST WILL GIVE BRAINLY!!!!!!!


explain at least one way that engineers and scientists work to prevent coastal erosion.

Answers

Answer:

the answer is the explaination

Explanation:

Present beach erosion prevention methods include sand dunes, vegetation, seawalls, sandbags, and sand fences. Based on the research conducted, it is evident that new ways to prevent erosion must be obtained. Each way that is currently used has extensive negative effects on beaches and their natural tendencies.

Answer:

They will construct strong sea walls with the intent to protect the coastline and infrastructure that could be affected by erosion.

Explanation:

A standing wave with 5 loops is created on a string that is 0.75 m long. If the
wave has a velocity of 300 m/s, what is the frequency of the wave?
1000 Hz
400 Hz
225 Hz
90 Hz
None of the above

Answers

wave velocity = frequency × wavelength

300 = frequency × 0.75

Frequency = 300÷0.75 = 400 HZ

Two cars travel in the same direction along a straight highway, one at a constant speed of 55 mi/h and the other at 60 mi/h.How far must the faster car travel before it has a 15-min lead on the slower car

Answers

Answer:

The distance traveled by the faster car when it is 15 mins ahead of the slower car is 165 miles.

Explanation:

Given;

speed of the faster car, v₁ = 60 mi/h

speed of the slower car, v₂ = 55 mi/h

Let the distance traveled by the faster car when it is 15 mins ahead of the slower car = x miles

[tex]\frac{x}{55} - \frac{x}{60} = \frac{15}{60}[/tex]

Note: divide 15 mins by 60 to convert to hours for consistency in the units.

[tex]\frac{x}{55} - \frac{x}{60} = \frac{15}{60}\\\\multiple \ through \ by \ 660\\\\12x - 11x = 165\\\\x = 165 \ miles[/tex]

Therefore, the distance traveled by the faster car when it is 15 mins ahead of the slower car is 165 miles.

A 6 kg ball experiences a 5 m/s^2 acceleration. What is the strength of the force felt by the ball?

a: 0.83kg
b: 30 newtons
c: 30 kg
d: 1.2 newtons

Answers

Answer:

30 newtons

explanations

data given

mass=6kg

acceleration=5

f=m×a

6×5=30

If a fisherman applies a horizontal force with magnitude 47.0 NN to the box and produces an acceleration of magnitude 3.20 m/s2m/s2, what is the mass of the box

Answers

Answer:

The correct solution is "14.6875 kg".

Explanation:

Given values:

Force,

F = 47.0 N

Acceleration,

a = 3.20 m/s²

Now,

⇒ [tex]Force=Mass\times Acceleration[/tex]

or,

⇒       [tex]F=ma[/tex]

⇒    [tex]47.0=m\times 3.20[/tex]

⇒       [tex]m=\frac{47.0}{3.20}[/tex]

⇒           [tex]=14.6875 \ kg[/tex]

100 POINTS AND BRAINLIEST!!! How does the egg sucked into a glass bottle trick work?

Answers

Answer: The egg will get sucked into the bottle. To get the egg out of the bottle, turn the bottle upside down and blow into it, so that the egg acts as a one-way valve. The increased air pressure in the bottle will cause the egg to pop back out.

Explanation:

Quickly place the egg over the mouth of the bottle. The egg will get sucked into the bottle. To get the egg out of the bottle, turn the bottle upside down and blow into it, so that the egg acts as a one-way valve. The increased air pressure in the bottle will cause the egg to pop back out.

Parallel rays from a distant object are traveling in air and then are incident on the concave end of a glass rod with a radius of curvature of 15.0 cm. The refractive index of the glass is 1.50. What is the distance between the vertex of the glass surface and the image formed by the refraction at the concave surface of the rod? Is the image in the air or in the glass?

Answers

Answer:

the distance of image from the vertex is 45 cm and the image formed is in the glass.

Explanation:

distance of object, u = - infinity

radius of curvature, R = - 15 cm

refractive index, n = 1.5

Let the distance of image is v.

Use the formula

[tex]-\frac{n1}{u}+\frac{n2}{v}=\frac{n2- n1}{R}\\\\-\frac{1}{\infty }+\frac{1.5}{v}=\frac{1.5-1}{-15}\\\\v=45 cm[/tex]

The image is in the glass.  

What is the first quantum number of a 252 electron in phosphorus,
1322s22p3s23p3?
A. n=0
B. n= 3
O
C. n = 1
O D. n = 2

Answers

Answer:

the correct answer is B

Explanation:

The quantum numbers are the constants obtained when solving the Schrodinger equation, the first quantum number or principal quantum number (n), can take values ​​from zero to infinity.

This quantum number is placed as a coefficient in the quantum distribution.

In this case for phosphorus, the number is n = 3

the correct answer is B

Identical net forces act for the same length of time on two different spherical masses. Which of the following describes the change in linear momentum of the smaller mass compared to that of the larger mass?

a. it is smaller than the change in linear momentum of the larger mass but not zero.
b. It is larger than the change in linear momentum of the larger mass.
c. It is equal to the change in linear momentum of the larger mass.
d. It is zero

Answers

Answer:

the correct answer is c

Explanation:

In this exercise we seek the momentum

          I = F t

this value is set because forces and time are given.

Now we can use the relationship between linear momentum and momentum

         I = p_f - p₀

         I = m v_f - m v₀

suppose that the two spheres depart with the same initial velocity

Let's analyze these results, the value of the impulse is the same, so the body of lower mass must acquire greater speed or momentum

consequently the lighter sphere acquires more final speed, but the change of momentum is the same in the two spheres

Consequently the correct answer is c

The brake shoes of your car are made of a material that can tolerate very high temperatures without being damaged. Why is this so

Answers

they have rubber and meatal so its going to get hot of course cause it a engine pushing and the gasoline is just all coming together but damage wise I still it the protection on that part to keep it from damage and life risk

I hope this may help

Two loudspeakers emit sound waves along the x-axis. The sound has maximum intensity when the speakers are 15 cm apart. The sound intensity decreases as the distance between the speakers is increased, reaching zero at a separation of 65 cm .

Required:
What is the wavelength of the sound?

Answers

Answer:

100 cm

Explanation:

It is given that there are two loudspeakers that produces [tex]$\text{sound waves }$[/tex] along x-axis.

The maximum intensity of the sound is [tex]$\text{when the speakers are}$[/tex] at a distance of = 15 cm apart.

The sound intensity becomes zero when the separation between the speakers are increased and becomes 65 cm.

Therefore, the sound waves are in the phase, [tex]$\Delta x_1=15 \ cm$[/tex]

The sound waves are out of phase when [tex]$\Delta x_2=65 \ cm$[/tex]

Therefore,

[tex]$\Delta x_2 - \Delta x_1 = \frac{\lambda}{2}$[/tex]

[tex]$\lambda= 2(\Delta x_2 - \Delta x_1)$[/tex]

  = 2 (65 - 15)

  = 2 x 50

  = 100 cm

Hence the wavelength of the sound is 100 cm.

If the light energy passes through material in straight lines they are __?___ to light.

Answers

Answer:

transparent

Explanation:

You throw a glob of putty straight up toward the ceiling, which is 3.50 mm above the point where the putty leaves your hand. The initial speed of the putty as it leaves your hand is 9.50 m/sm/s. Part A What is the speed of the putty just before it strikes the ceiling

Answers

Answer: [tex]4.65\ m/s[/tex]

Explanation:

Given

Distance putty has to travel is 3.5 m

The initial speed of putty is 9.50 m/s

Using equation of motion to determine the velocity of putty just before it hits ceiling

[tex]v^2-u^2=2as[/tex]

[tex]\Rightarrow v^2-(9.5)^2=2(-9.8)(3.5)\\\\\Rightarrow v^2=9.5^2-68.6\\\Rightarrow v=\sqrt{90.25-68.6}\\\Rightarrow v=4.65\ m/s[/tex]

So, the velocity of putty just before hitting is [tex]4.65\ m/s[/tex]

while hunting in a cave a bat emits sounds wave of frequency 39 kilo hartz were moving towards a wall with a constant velocity of 8,32 meters per second take the speed of sound as 340 meters per second calculate frequency​

Answers

Complete question:

while hunting in a cave a bat emits sounds wave of frequency 39 kilo hartz were moving towards a wall with a constant velocity of 8.32 meters per second take the speed of sound as 340 meters per second. calculate the frequency​ reflected off the wall to the bat?

Answer:

The frequency reflected by the stationary wall to the bat is 41 kHz

Explanation:

Given;

frequency emitted by the bat, f = 39 kHz

velocity of the bat, [tex]v_b[/tex] = 8.32 m/s

speed of sound in air, v = 340 m/s

Apply the doppler-effect principle to solve this problem.

The apparent frequency of sound striking the wall is calculated as;

[tex]f' = f(\frac{v}{v- v_b} )\\\\f' = 39,000(\frac{340}{340 -8.32} )\\\\f' = 39978.29 \ Hz[/tex]

The frequency reflected by the stationary wall to the bat is calculated as;

[tex]f_s = f'(\frac{v + v_b}{v} )\\\\f_s = 39978.29(\frac{340 + 8.32}{340} )\\\\f_s = 40,956.56 \ Hz[/tex]

[tex]f_s\approx 41 \ kHz[/tex]

what's the difference between mass and inertia in a tabular form​

Answers

Answer:

to be honest i dont know

Explanation:

^^

The volume of an ideal gas changes from 0.40 to 0.55 m3 although its pressure remains constant at 50,000 Pa. What work is done on the system by its environment

Answers

Answer:

w= p∆v 50000 ( 0.55-0.40) and calculate and you get it

The work done on the system by its environment is 7,500J.

To find the work done, we need to know about the work done on an ideal gas during isobaric process.

What is isobaric process?

When the pressure is remained constant throughout a process, then the process is called isobaric process.

What is the work done on a system in the isobaric process?For a isobaric process, the work done is pressure × (final volume of the system - initial volume)

Here, Final volume= 0.55 m³

         Initial volume= 0.40 m³

         Pressure= 50,000 Pa

Work done = 50,000 × (0.55 - 0.40)

                  = 7,500 J

Thus, we can conclude that 7,500 J of  work is done on the system by its environment.

Learn more about worn done on a system here:

https://brainly.com/question/23902763

#SPJ2

3. Sally (45 kg) and Stan (90 kg) and arrive at Michigan Adventure and climb the stairs to ride the big
Shivering Timber coaster that is nearly 40 m tall and reaches speeds of 65 mi/hr.
a) Compare the potential energies of Sally and Stan as they wait in line at the top of the stairs.
Explain your reasoning.

Answers

It would be the answer A) because I got it right

Name the state of matter in which

(a) Rate of diffusion is fastest (b) diffusion does not take place.
plss essay ​

Answers

Answer:

A

Explanation:

it’s A!!!!!!!!!!!!!!

Some students are making a domino cascade for a fair project and want to use a ball rollingup and then down an incline in one part of it. The timing has to be very precise so theyneed to know exactly how long it will take the ball to go up and down. They have measuredthe acceleration of the ball on the incline to be 2.5 m/s2. If the ball starts part way up theramp, rolls up for 1.1 m, then down 0.7 m past its starting point, how long will it take

Answers

Answer:

total time taken is 2.1389 seconds

Explanation:  

Given the data in the question and as illustrated in the diagram below;

They have measured the acceleration of the ball on the incline to be 2.5 m/s²

a = -2.5 m/s²    { negative because its acting downward }

from the diagram, Motion from B to C will be;

v² = u² + 2as

given that distance s = 1.1 m

we substitute

v² - u² = 2as

(0)² - u² =  2 × (-2.5 m/s ) × 1.1 m

-u² = -5.5

u = √5.5

so Initial speed; u = 2.345 m/s

to get the time, we use the equation of motion;

v = u + at

we substitute

0 = 2.345 m/s + ( -2.5 m/s² × t₁ )

2.5t₁ = 2.345

t₁ = 2.345 / 2.5

t₁ = 0.938 s

Now, from C to B

we determine t₂

s = vt₂ + [tex]\frac{1}{2}[/tex]at₂²

1.1 m = 0×t₂ + [tex]\frac{1}{2}[/tex] × 2.5 m/s² × t₂²

1.1 m = [tex]\frac{1}{2}[/tex] × 2.5 m/s² × t₂²

1.1 m = 1.25 m/s² × t₂²

t₂² = 1.1 m / 1.25 m/s²

t₂² = 0.88 s²

t₂ = √0.88 s²

t₂ = 0.938 s

Next, from B to A; t₃ will be;

s = ut₃ + [tex]\frac{1}{2}[/tex]at₃²

we substitute

0.7 m = (2.345 m/s)t₃ + [tex]\frac{1}{2}[/tex] × 2.5 m/s × t₃²

0.7 m = (2.345 m/s)t₃ + ( 1.25 m/s )t₃²

1.25t₃² + 2.345t₃ - 0.7 = 0

using; x = [ -b ± √( b² - 4ac ) ] / 2a

we substitute

x = = [ -2.345 ± √( (2.345)² - (4 × 1.25 × -0.7) ) ] / 2(1.25)

x = [ -2.345 ± √( 5.499 + 3.5 ) ] / 2.5

x =  [ -2.345 ± √( 8.999 ) ] / 2.5

x =  [ -2.345 ± 2.9998 ] / 2.5

x =  ( [ -2.345 - 2.9998 ] / 2.5 ) or ( [ -2.345 + 2.9998 ] / 2.5 )

x = -2.1379 or 0.2629

hence t₃ = 0.2629 s

∴ Total time = t₁ + t₂ + t₃

Total time = 0.938 s + 0.938 s + 0.2629 s

Total time = 2.1389 seconds

Therefore, total time taken is 2.1389 seconds

True or false, wrrect the false
statement:
• The magnetic field created by a flat coil is
uniform.
• Inside a solenoid, the lines of field are
oriented from the north face to the south
face.
• The magnetic field outside Helmholtz
coils is uniform.
• Le champ B à l'intérieur d'un solénoïde
est uniforme.
• The magnitude of B, created by a flat coil
of radius R, at any point in its plane is
B= 2m x 10-NI
R
• The designation of the faces of a wil
depend the sense of the current
traversing it.

Answers

Answer:

false

Explanation:

state the two motion equations.​

Answers

Answer:

Equations of motion relate the displacement of an object with its velocity, acceleration and time. s=vt where s is the displacement, v the (constant) speed and t the time over which the motion occurred. ...

Displacement with negative acceleration: s, equals, v, t, minus, one half, a, t, square...

Displacement with positive acceleration: s, equals, u, t, plus, one half, a, t, squared,s...

Velocity squared: v, squared, equals, u, squared, plus, 2, a, s,v2=u2+2as

Velocity: v, equals, u, plus, a, t,v=u+at

Harper suffers from nearsightedness equally severely in both eyes. The focal length of either of Harper's eyes is 16.7 mm in the relaxed state. What lens strength (a.k.a., lens power) of contact lenses should be prescribed to correct the nearsightedness in Harper's eyes

Answers

The lens strength or lens power of contact lenses that m should be prescribed to correct the nearsightedness is 59.9 diopters.

What is focal length of a lens?

The focal length of a lens is the distance from a lens to the focal point of that lens.

It is a measure of how strongly a lens converses or diverges light.

The power of a lens is the inverse of the focal length when given in metres.

Power of a lens = 1/focal length (m)

The focal length = 16.7 mm = 0.0167 M

Power of lens required = 1/0.0167 = 59.9 diopters

Therefore, the lens strength or lens power of contact lenses that m should be prescribed to correct the nearsightedness is 59.9 diopters.

Learn more about power of lens at: https://brainly.com/question/17166887

#SPJ1

I need help with this assignment

Answers

what assignment? theres no picture

With explanation pls

Answers

Answer:

[tex](x \times 1) = (400 \times 2.5) \\ x = 1000 \: newtons[/tex]

[tex]y = 0[/tex]

[3 marks]
A particle of mass 100 g executes simple harmonic motion about x = 0 with angular frequency ω = 10 s-1. Its total mechanical energy is Etot = 0.45 J. Find the displacement of
the particle when its speed is 2 m/s. [3 marks]​

Answers

Answer:

22.4 cm

Explanation:

The total mechanical energy of the particle Etot = K + U where K = kinetic energy = 1/2mv² where m = mass of particle = 100 g =0.1 kg and v = speed of particle = 2 m/s and U = potential energy = 1/2kx² where k = spring constant and x = displacement

Etot = K + U

U = Etot - K

U = Etot - 1/2mv²

Since Etot = 0.45 J, substituting the values of the other variables into the equation, we have

U = Etot - 1/2mv²

U = 0.45 J - 1/2 × 0.1 kg × (2 m/s)²

U = 0.45 J - 1/2 × 0.1 kg × 4 m²/s²

U = 0.45 J - 0.1 kg × 2 m²/s²

U = 0.45 J - 0.2 J

U = 0.25 J

Now U = 1/2kx² and the angular frequency ω = √(k/m) ⇒ ω²m = k

So, U = 1/2ω²mx²

x² = 2U/ω²m

x = (√2U/m)/ω

since ω = 10 rad/s, substituting the values of the variables into the equation, we have

x = (√2U/m)/ω

x = (√2 × 0.25 J/0.1 kg)/10 rad/s

x = (√0.5 J/0.1 kg)/10 rad/s

x = (√5 J/kg)/10 rad/s

x = 2.24/10 m

x = 0.224 m

x = 22.4 cm

g You decide to play fetch with your dog, who is sitting nextto you, so you throw a ball down a narrow hallway. The ballcomes to a stop 3.9 m down the hallway. The dog, startingfrom rest, runs after the ball with a constant acceleration of0.70m/s2until she reaches the ball. She grabs the ball whilestill running down the hallway uniformly accelerating(slowingdown) for 4.7 more seconds until she comes to a stop. What isthe total distance the dog travels to grab the ball and come toa final stop, starting from rest

Answers

You decide to play fetch with your dog, who is sitting nextto you, so you throw a ball down a narrow hallway. The ballcomes to a stop 3.9 m down the hallway. The dog, startingfrom rest, runs after the ball with a constant acceleration of0.70m/s2until she reaches the ball. She grabs the ball whilestill running down the hallway uniformly accelerating(slowingdown) for 4.7 more seconds until she comes to a stop. What isthe total distance the dog travels to grab the ball and come toa final stop, starting from rest

Other Questions
Find the area of the triangle Are many people who think that dancing is a great way to get exercise and still have fun. Many dance teachers make videos you can to practice dancing in own home. Once you're learning the basics, much easier to learn more advanced moves. c. Solve 1/2 x - (x+3) - 7th Grade Work -Please answer if it's a, b, c, or d.Please help ; - ; The diagonal and the longer side of a rectangle make an angle of 43.2. If the longerside is 12.6cm. Find the length of the shorter Side. When, in the course of human events, it becomes necessary for one portion of the family of man to assume among the people of the earth a positiondifferent from that which they have hitherto occupied, but one to which the laws of nature and of nature's God entitle them, a decent respect to the opinionsof mankind requires that they should declare the causes that impel them to such a course.We hold these truths to be self-evident: that all men and women are created equal; that they are endowed by their Creator with certain inalienable rights:that among these are life, liberty, and the pursuit of happiness, that to secure these rights governments are instituted, deriving their just powers from theconsent of the govemed. Whenever any form of government becomes destructive of these ends, it is the right of those who suffer from it to refuse allegianceto it, and to insist upon the institution of a new government, laying its foundation on such principles, and organizing its powers in such form, as to them shallseem most likely to effect their safety and happiness.Prudence, indeed, will dictate that governments long established should not be changed for light and transient causes; and accordingly all experiencehath shown that mankind are more disposed to suffer, while evils are sufferable, than to right themselves by abolishing the forms to which they areaccustomed. But when a long train of abuses and usurpations, pursuing invariably the same object, evinces a design to reduce them under absolutedespotism, it is their duty to throw off such government, and to provide new guards for their future security. Such has been the patient sufferance of thewomen under this government, and such is now the necessity which constrains them to demand the equal station to which they are entided.The history of mankind is a history of repeated injuries and usurpations on the part of man toward woman, having in direct object the establishment of anabsolute tyranny over her. To prove this, let facts be submitted a candid world.2Select the correct answer.The tone of this passage can be described asA . lamentingB.assured.C.disillusioned.D.ffensive please show your work Help me QUICKPicture included of the problem Horizontal variations in air pressure cause a force which makes the wind blow. These pressure variations are caused by a. warm temperatures in the stratosphere b. non-circular shape of Earth c. uneven heating of the Earth's surface d. greenhouse effect e. Earth's rotation what is the light synthesis ? pleaseeee helpppppppp its due now What does the federal government provide toinvestors to get them to build the railroads in a shortperiod of time? (The Glided Age) State three (3) qualities if a good kitchen premises.Mention four (4) examples of cleaning materialDefine stewingGive two examples of food that can be stewedState two (2) liquid that can be used in cooking0What is boilingWhat are the two ways of boiling5i)ii)State and explain the factors to consider when designing a kitchenState two qualities of a store keeperState two (2) duties of a store keeperi)ii)iii)explains the term kitchen equipmentList the three types of equipment and give two example eachState the use of the following kitchen equipmentBratt pana.h Chopping knife Rewrite as an exponential equation.Log3 1/81 = -4 Help me i just need this one Use the box method to distribute and simplify (4x + 6)(- 6x ^ 4 - 4x - 6x ^ 3 + 6 + 4x ^ 2) . Drag and drop the terms to the correct locations of the table. A recent college graduate has obtained employment at a major financial institution in the big city. Since she just graduated, she has decided to continue to rent her college apartment in the suburbs and make the daily commute to the big city for work. She currently pays $1,200 per month to rent an apartment in the suburbs. She works at the bank five days a week and it takes her one hour each way to commute from her home to her office. According to the assumptions of the bid-rent model, what should this recent grad be willing to pay in rent per month to live in the big city if her hourly wage rate is $25 Pls helpWill give brainliest Explain what resonance is and give one example of a destructive outcome of resonance. Also give one example of a non-destructive outcome of resonance. Use details to support your answer.