In the video, the students create two charged tapes, a "pointy" tape and a "square" tape. The pointy tape is first placed on top of the square tape, and the two are pulled apart. After pulling them apart, the students observed the behavior of the tapes when they were brought near each other, but not touching each other.

Two wires increase in length by the same amount when both their temperatures increase by the same amount, the shortness of the wire before the temperature increase is mathematically given as

dL=0.1485m

Generally, the equation for change in length is mathematically given as

[tex]dl=lo \alpha dt[/tex]

Therefore

dl1=dl2

Where

a2=1.35a1

Hence

a1l1dt= a2l2dt

a1(1.2525)= a1*(1.135)(l2)

L2=1.104m

In conclusion, a change in length due to temperature is

dL=1.2525-1.104m

dL=0.1485m

Read more about Temperature

https://brainly.com/question/13439286

#SPJ1

The minimum force required to lift the box at constant velocity is determined as 274.4 N.

The minimum force required to lift the box at constant velocity is the tension in one of the pulleys, and the magnitude is calculated as follows;

2T = mg

where;

2T = mg

T = mg/2

T = (56 x 9.8)/2

T = 274.4 N

Learn more about minimum force here: https://brainly.in/question/47873510

#SPJ1

Answer:

The separation of visible light into its different colors is known as dispersion. It was mentioned in the Light and Color unit that each color is characteristic of a distinct wave frequency; and different frequencies of light waves will bend varying amounts upon passage through a prism

Explanation:

Answer:

A person with impairment of organs of equilibrium would compensate for their lack of sensory information by their eyes therefore if their eyes are closed they aren't able to sense their location in space accurately (Proprioception)

Explanation:

Answer:

tan is 15 for that triangle

Answer:

c. 1.33

Explanation:

edmentum

Answer:

Because molecules cannot function independently whereas when they combine they give rise to functional unit called cell.

Answer:

B

Explanation:

Electric charges and magnetic dipoles

Iron forms an oxide when exposed to air is a true property about this element.

This is an element which has magnetic properties and forms an oxide when exposed to air.

Iron forms ferric oxide in the presence of oxygen which is the brown like color seen in the form of rust.

Read more about Iron here vhttps://brainly.com/question/14964747

#SPJ1

Answer:

It is showing the wavelength.

Explanation: Hope it helps you:)))

have a good day

Answer: A heat engine uses temperature differences which cause pressure changes to exert force on a moving part. A Carnot Process is a theoretical explanation of a process involving pressure and temperature changes during ,amongst other things, phase changes.

Explanation:

Answer: The difference is a heat engine uses temperature differences which cause pressure changes to exert force on a moving part, A Carnot engine is only a theoretical explanation of a process involving pressure and temperature changes during or amongst other things.

Explanation:

This feather weighs heavier on earth than on Mars hence it is better that the feather falls on you in Mars than on earth.

The term weight refers to the effect of the gravitational pull on an object. The acceleration due to gravity on earth is about 9.8m/s^2. The weight of this feather on earth is about 4.80 Kg *  9.8m/s^2 = 47 N

On the planet Mars, the weight is;

4.80 Kg * (0.38 * 9.8m/s^2) = 18 N

This feather weighs heavier on earth than on Mars hence it is better that the feather falls on you in Mars than on earth.

Learn more about gravity:https://brainly.com/question/4014727

#SPJ1

Hi there! :)

We can begin by doing a summation of forces on the ball. In the horizontal direction, we have the force of tension:
[tex]F_{Net} = T[/tex]

The tension force results in a centripetal force experienced by the ball. The equation of centripetal force is equivalent to:
[tex]F_C = m\omega^2 r[/tex]

[tex]F_C[/tex] = Centripetal force (N)
m = mass of ball (0.22 kg)

ω = angular speed of ball(? rad/sec, must convert rpm to rad/sec)

r = radius/length of string (1.0 m)

We must begin by converting rpm to rad/sec:

[tex]\frac{50 rev}{min} * \frac{2\pi rad}{1 rev}* \frac{1 min}{60 sec} = 5.236 \frac{rad}{s}[/tex]

Now, we can set tension equal to the centripetal force and solve. [tex]T = F_{Net} = F_C\\\\T = m\omega^2 r\\\\T = (0.22)(5.236^2)(1) = \boxed{6.031 N}[/tex]

The radius of a magnesium atom is 0.160nm. The radius of a nucleus is about 1/10000 that of an atom.

The nucleus is an organelle that contains the DNA i.e. genetic material and other materials which is required for cellular processes. It is only found in eukaryotic cells that is responsible for controlling the processes of the cell.

So we can conclude that the radius of a magnesium atom is 0.160nm which is equals to about 1/10000 radius of that atom.

Learn more about radius here: https://brainly.com/question/24375372

#SPJ1

Answer:

A 0.88

Explanation:

frequency=1/period

=1/1.13=0.88

Answer:

Recycling of paper cannot be reversed thus making it an irreversible change

Explanation:

When we recycle paper an entirely new product can be made which cannot be changed back to paper

Explanation:

We know that,

Magnitude of a unit vector is 1.

and, magnitude of a vector in the form [tex] \sf a \hat{i}+b \hat{j} + c \hat{k} [/tex]

is [tex] \sf \sqrt{a^2+b^2+c^2 } [/tex]

The given vector is,

[tex]\sf \vec{A}= 0.3 \hat{i} + 0.4 \hat{j} + B \hat{k}[/tex]

Magnitude of the given vector is,

[tex]\sf | \vec{A}|= \sqrt{(0.3)^2+(0.4)^2+B^2} =1[/tex]

[tex]\sf \sqrt{0.09+0.16+B^2}=1[/tex]

[tex]\sf 0.25+B^2=1[/tex]

[tex]\sf B^2=1-0.25=0.75[/tex]

[tex]\sf B = \sqrt{0.75} ≈ 0.87[/tex]

Answer: endurance, strength, balance, flexibility

Explanation:

walking, jogging, swimming, biking

Answer:

Work done =3 joules

Explanation:

1 volt is the same as 1 Coulomb and 1 Joule

V=W/Q

1=W/3

W=3 x 1

W=3 Joules

Answer:

The (latent) heat of vaporization (∆Hvap) also known as the enthalpy of vaporization or evaporation, is the amount of energy (enthalpy) that must be added to a liquid substance, to transform a given quantity of the substance into a gas.

The enthalpy of vaporization is a function of the pressure at which that transformation takes place. The heat of vaporization diminishes with increasing temperature and it vanishes completely at a certain point called the critical temperature (Critical temperature for water: 373.946 °C  or 705.103 °F,  Critical pressure: 220.6 bar = 22.06 MPa  = 3200 psi ).

The statement 'Swamps and other wetlands do not offer much value to humans' is FALSE.

Swamps and other wetlands are specific ecosystems that are abundant in biodiversity and therefore offer many advantages.

Biodiversity is fundamental to discovering new biotechnological applications and therefore swamps are fundamental for humans.

In conclusion, The statement 'Swamps and other wetlands do not offer much value to humans' is FALSE.

Learn more about swamp diversity here:

https://brainly.com/question/14619172

#SPJ1

#1

The kinetic energy decreases

#2

This is because of law of conservation of linear momentum .

The momentum is conserved

So the velocity of ball decreases than before .

So kinetic energy also decreases

#3 and #4

Kinetic energy of the can increases as after the collision the velocity of the can increases so the kinetic energy also increases

Answer:

300 J

Explanation:

Given :

Work done by the force :

Note :

The amount of energy needed to boil away the water at the initial temperature  is 301,248 J.

The amount of energy needed to boil the water at the given is calculated as follows;

Q = mcΔθ

where;

density of water = 1000 g/L

mass = density x volume

mass of water = 1000 g/L x 1.6 L = 1,600 g

Q = 1600 g x 4.184 J/g⁰C x (100⁰C - 55 ⁰C)

Q = 301,248 J

Learn more about heat capacity here: https://brainly.com/question/21406849

#SPJ1

The force required to punch a hole 1 cm in diameter in a steel sheet is 0.176 x 10¹³ N.

The force is defined as the shear stress or pressure applied per unit area.

F = P/A

Given is a steel sheet whose thickness t = 5mm = 5x 10⁻³ m, shearing strength P = 2.76 × 10⁸ N/m², diameter of hole d = 1cm = 1x 10⁻² m

The area to be punched A = πd xt

A = π x 1x 10⁻² x5x 10⁻³

A = 15.7 x 10⁻⁵ m²

The force required to punch a hole is

F = 2.76 × 10⁸ /  15.7 x 10⁻⁵

F = 0.176 x 10¹³ N.

Thus, the punching force is  0.176 x 10¹³ N.

Learn more about force.

https://brainly.com/question/21763500

#SPJ1

The rocket's x- and y-coordinates relative to its launching point will be -0.975 and -0.219 m/sec, respectively.

The change of displacement with respect to time is defined as the velocity.  Velocity is a vector quantity. it is a time-based component.

Velocity at any angle is resolved to get its component of x and y-direction.

Given data;

V = 100m/s

θ=550°

t= 142 sec

The given velocity is resolved into the component as:

[tex]\rm V_X=Vcos \theta \\\\ V_y = Vsin\theta[/tex]

The x coordinate of the rocket:

[tex]\rm V_x = 100 cos \ 550^0 \\\\ V_x = -0.975616[/tex]

The y coordinate of the rocket:

[tex]\rm V_y =100 sin \ 550^0 \\\\ V_y = -0.219484[/tex]

Hence, the x-and y- coordinates of the rocket relative to its firing point will be -0.975 and -0.219 m/sec.

To learn more about the velocity refer to the link ;

https://brainly.com/question/862972

#SPJ1

Answer:

6 m/s

Explanation:

Average velocity = Total distance covered / Time taken to cover distance

Finding Average Velocity :

⇒ 20 m + 40 m / 2 s + 8 s

⇒ 60 m / 10 s

⇒ 6 m/s

a body covers a distance of 20 m in 2 second and then covers 40 metre in next it s8 on a straight line calculate its velocity.

So the Average velocity is 6m/s²

ANSWER:

C = carbon

Al = aluminium

H = hydrogen

O = oxygen

Na = sodium

I hope it helps u dear (^^)

The current flowing through the lamp is  1.833A

The current is the stream of charges which flow inside the conductors when connected across the end of voltage.

From the Ohm's law, V =IR

Here, R is the proportionality constant called resistance of the resistor

A lamp with a resistance of 60 Ohms is plugged into a 110-Volt household circuit.

I = V/R

Put the values, we get

I = 110/60

I = 1.833A

Thus, the current flowing through the lamp is  1.833A

Learn more about current.

brainly.com/question/10677063

#SPJ1