In the preparation of a certain alkyl halide, 10 g of sodium bromide (NaBr), 10 mL distilled water (H20), and 9 mL 3-methyl-1-butanol (C5H120) were mixed in the round-bottomed flask and allowed to cool for 2 -3 minutes. Then while swirling the flask, 10 mL sulfuric acid (H2SO4) was slowly added to the flask and the mixture was refluxed and later distilled. The mass of the pure product obtained was 6.48 g. Sodium hydrogen carbonate (NaHCO3) was used to remove impurities. (Density of 3-methyl-1-butanol is 0.810 g/mL). The percentage yield will be?​

Answer:

29 percent of federal R&D money goes to universities, 29 percent goes to industry, and another 29 percent goes to researchers who work directly for federal agencies. About 10 percent goes to federally funded labs operated by private contractors.

Answer:

Explanation:

Funding from the government greatly affects the scientific research as a research can take number of years to complete. During this time period lot of financial support is required as there might be lot of expensive chemicals or substance that the scientist requires for his research.

Answer:

A compound is a pure substance.

Answer:

Francium bc it has the largest atomic radius

Francium has the greatest atomic radius. Despite being a highly radioactive metal with a short half-life, francium has little environmental impact.

To learn more about francium refer to:

https://brainly.com/question/9050178

#SPJ2

Answer:837.9

Explanation:add those 2 numbers

Answer:

welp to bad got nothing for you ezcecect good luck bye btw its always the one you think its not

Explanation:

dugg

Answer:

When the energy is passed on from one trophic level to another, only 10 percent of the energy is passed on to the next trophic level.

Explanation:

Answer:

Butanoic acid and 2-propanol reacts to form isopropyl butyrate.

Explanation:

brainliest plz

Answer:

true

Explanation:

hydrogen and carbon make hydrocarbons

Answer:

1. Uniform, non visible

2. Visible, non uniform

3. Uniform, non visible

4. Visible, non uniform

5. Visible, non uniform

Explanation:

A heterogeneous mixture is simply any mixture that is not uniform in composition — it's a non-uniform mixture of smaller constituent parts. By contrast, a mixture that is uniform in composition is a homogenous mixture

visible state of matter is when you can easily difference two components of a mixture

non visible is when the state of the matter in the substance is not visible to the eye, it can't be differentiated

Answer:

The volume of an object can be calculated by multiplying its length, width and height. Further, depending on the shape of the object, its volume changes.

Explanation:

Hope this helps

True. I am always sad but my heart is always happy cuz it knows there are good things ahead

Answer: The first one has the most kinetic energy. Why? traveling with the slowest speed comes with the faster stop withholding more energy in the stone

Explanation:

Answer:

what question?

Explanation:

Answer:

H2O is the name of this molecule and it is water

Answer:

4.56 X 10^ -4 g/mL

Explanation:

A solution is  prepared by diluting 6.0 mL of a 7.6 x 10-4 g/mL solution to a total volume of 10.0 mL. Calculate the concentration of the dilute solution.

(7.6 X10^-4  gm/m L) x( 6.0 m L ) = 45.6 X 10^-4 g

this is dissolved )in 10 m L=45.6 X 10^-4  g/ 10

4.56 X 10^ -4 g/mL

check

6/10 =0.6

4.56/7.6 = o.,6

Answer:

from,

moles,n = number of particles, N

Avogadro constant

N = 8.27 * 6.022×10^23

N = 4.98 × 10^ 24particles.

In 8.27 moles of SiH, there are

4.98 × 10^24particles.

Answer:

here is no question (e).............

Answer:

Answer Below! : )

Explanation:

Groundwater is stored in the tiny open spaces between rock and sand, soil, and gravel. How well loosely arranged rock (such as sand and gravel) holds water depends on the size of the rock particles.

Hope this helps! : )

Answer:

Underground  brainliest plz

Explanation:

Taking into account the definition of density,  the mass of two cubic inches (2.00 in³) of gold is 632.54 grams.

But first you must know the definition of density. Density is defined as the property that matter, whether solid, liquid or gas, has to compress into a given space.

In other words,  density is a scalar quantity referring to the amount of mass in a given volume of a substance, that is, it shows the relationship between the weight (mass) of a substance and the volume it occupies.

Then, the expression for the calculation of density is the quotient between the mass of a body and the volume it occupies:

[tex]density=\frac{mass}{volume}[/tex]

In this case, you know that:

Replacing in the definition of density:

[tex]19.3\frac{g}{cm^{3} } =\frac{mass}{32.7741 cm^{3} }[/tex]

Solving:

mass= 19.3 [tex]\frac{g}{cm^{3} }[/tex]× 32.7741 cm³

mass= 632.54 g

In summary, the mass of two cubic inches (2.00 in³) of gold is 632.54 grams.

Learn more about density:

In acetylene each carbon atom share one pair of electrons with hydrogen atom and three pairs with the other carbon atom.

Carbon atom has four electrons its outermost shell it means that it needs four electrons to become stable. In acetylene, two carbon atoms covalently bonded three pairs of electron with each other and the one remaining pair is covalently bonded with two hydrogen atoms.

In this way the carbon as well as hydrogen atoms get stability so we can conclude that in acetylene each carbon atom share one pair of electrons with hydrogen atom and three pairs with the other carbon atom.

Learn more: https://brainly.com/question/25173768

In C2H2, each carbon atom would share one pair of electrons with hydrogen and three pairs with the other carbon atom.

Acetylene has the molecular formula C2H2. We must recall that carbon is a member of group 14 and it is always tetravalent in all its compounds. Hydrogen is always univalent in its compounds except in hydrides.

Since carbon is always tetravalent and hydrogen is univalent,each carbon atom would share one pair of electrons with hydrogen and three pairs with the other carbon atom in C2H2.

Learn more: https://brainly.com/question/10079361

Answer:

vc

Explanation:

cvcv

Answer:

Characteristics such as melting point, boiling point, density, solubility, color, odor, etc. are physical properties. Properties that describe how a substance changes identity to produce a new substance are chemical properties. ... Physical and chemical properties can be used to classify a substance as ionic or molecular.

Objects would no longer be drawn toward each other, because there would be no sloping surface for them to fall down. Instead, they would fly off in whatever direction gravity was keeping them from going.

Answer:

All items in the universe, humans, objects, and the planets, would be floating around. Everything would become weightless.

Answer: Special care is required to prepare a solution of sodium hydroxide or NaOH in water because considerable heat is liberated by the exothermic reaction. The solution may splatter or boil. Here is how to make a sodium hydroxide solution safely, along with recipes for several common concentrations of NaOH solution.

Explanation:

Hope this helps!

Answer:

25

Explanation: They all add up to 25 Atoms

The atomic number of nitrogen is 7 and that of oxygen is 8. Atomic number of hydrogen is one and the atomic number of sulphur is 16. Then, the sum of  atomic numbers of each element present in the reactants of the given formula is 32.

The atomic number of an atom is the number of electrons in its neutral state. This number is equal to the number of protons also. The modern periodic table classify all elements based on their atomic numbers.

The sum of number of protons and neutrons of an element is called its mass number. For the given formula, the elements present are H, O, N and S.

atomic number of H = 1

atomic numebr of N = 7

atomic number of O =8

atomic number of S = 16.

Then ,sum of atomic number s= 1 + 7 + 8 + 16 = 32.

Therefore, the sum of the atomic numbers of each element present in the reactants of the given formula is 32.

Find more on atomic number:

https://brainly.com/question/16858932

#SPJ3

Answer:

Filtration (The process of separating liquids and solids)

Explanation:

Filtration works best when the solute isn't dissolved in the solvent. Basically like how you can filter dirt or sand from water. The opposite of this would be if water and sugar where mixed together you cannot unmix this duo with filtration but with the example given you can use the process of filtration to rid the gasoline of sand.

Answer:

Aluminium sulphate is an inorganic compound.

#protactinium

The outer electronic configuration is 6d^17s^2

So it will form polar covalent bond (2)

#Francium

Outer electronic configuration 7s^1

It will form ionic bond (3)