if you divide polynomial f(x) by (x-7) and get a remainder of 5 what is f(7)

Answer:

50% of 30 is 15. 25% of 40 is 10. So, the product of 50% of 30 and 25% of 40 is 150.

Here's the calculation:

```

(50/100) * 30 * (25/100) * 40 = 150

```

Step-by-step explanation:

Based on constitutive laws, Lit's interpretation of her friend's actions.Therefore, choice b is right.

Tammy should have asked the host to serve her instead of reaching over the table to get the salt shaker since, as per the constitution, you are not allowed to reach across the table and touch objects on it.

Constitutive rules are those that have a creative purpose, making it possible to carry out specific activities or take part in a specific practise. They are typically opposed to regulative rules.

The practises that constitutive norms establish are metaphysically prior to one another.According to John Searle's influential constitutive rules theory, behaviours are only possible when certain conditions are met. This distinguishes regulative rules which aim to control previously existing and established behavior from constitutive norms.

To know more about constitutive rules please check the following link

https://brainly.com/question/31325033

#SPJ4

The units for the cost function C(x,y) are dollars, and the units for x and y are miles.

To minimize the cost of laying the pipeline:

Point P should be located 1.5 miles down the shoreline from the storage tank (point B).

To show this, let x represent the distance from point B to point P along the shoreline, and y represent the distance from point P to the rig (point R) underwater.

Then, the total cost of laying the pipeline can be represented by the function C(x,y) = 800y + 400(8-x).

Since the distance from point A to point R is 3 miles, we know that x + y = 3. Solving for y in terms of x, we get y = 3-x.

Substituting this into the cost function, we get C(x) = 800(3-x) + 400(8-x) = 3200 - 400x.

To minimize this function, we can take the derivative and set it equal to zero:

C'(x) = -400.

Therefore, there is no critical point, but the function is decreasing as x increases.

Since x represents the distance from point B to point P along the shoreline, we want to minimize x while still satisfying the constraint that x + y = 3.

This means that y must be maximized, which occurs when x = 1.5.

Therefore, point P should be located 1.5 miles down the shoreline from the storage tank (point B) and 1.5 miles from the rig (point R) underwater.

The domain of the function we optimized was x in [0,8] (the distance along the shoreline from point B to the right) since we cannot have a negative distance or a distance greater than 8 miles along the shoreline.

The units for the cost function C(x,y) are dollars, and the units for x and y are miles.

To now more about Cost Function:

https://brainly.com/question/31041336

#SPJ11

Different sequence of answers is  59049.

Explanation: -  

To determine the number of different sequences of answers that can be created with ten multiple-choice questions, each having three possible answers, we need to use the multiplication principle of counting. This principle states that the total number of possible outcomes of a sequence of events is the product of the number of outcomes for each event.

For the first question, there are three possible answers. For the second question, there are three possible answers, and so on for each of the ten questions. Using the multiplication principle, we can determine the total number of different sequences of answers by multiplying the number of outcomes for each question together: 3 x 3 x 3 x 3 x 3 x 3 x 3 x 3 x 3 x 3 = 59,049

Therefore, there are 59,049 different sequences of answers that can be created with ten multiple-choice questions, each having three possible answers.

Know more about the "multiplication principle" click here;

https://brainly.com/question/29117304

#SPJ11

Answer:

[tex]f^{-1}(x) = \dfrac{6x + 5}{1 - x}[/tex]

Step-by-step explanation:

To find the inverse of a function, we can swap x and y (f(x)), then solve for y, and represent that y as [tex]f^{-1}(x)[/tex].

[tex]f(x) = \dfrac{x - 5}{x + 6}[/tex]

↓ swapping x and y

[tex]x = \dfrac{y - 5}{y + 6}[/tex]

↓ multiplying both sides by (y + 6)

[tex]x(y + 6) = y - 5[/tex]

↓ simplifying using the distributive property

[tex]xy + 6x = y - 5[/tex]

↓ subtracting 6x and y from both sides to isolate the y terms

[tex]xy - y = - 6x - 5[/tex]

↓ undistributing y from the left side

[tex]y(x - 1) = - 6x - 5x[/tex]

↓ dividing both sides by (x - 1)

[tex]y = \dfrac{-6x - 5}{x-1}[/tex]

↓ (optional) multiplying the fraction by [tex]\bold{\dfrac{-1}{-1}}[/tex]

[tex]y = \dfrac{6x + 5}{1 - x}[/tex]

↓ replacing y with [tex]f^{-1}(x)[/tex]

[tex]\boxed{f^{-1}(x) = \dfrac{6x + 5}{1 - x}}[/tex]

Glucose is component is missing from the process of cellular respiration.

Glucose  + Oxygen → Carbon Dioxide + Water + Energy

What is cellular respiration in simple terms?

Cell breath is a progression of synthetic responses that separate glucose to create ATP, which might be utilized as energy to drive numerous responses all through the body. There are three primary strides of cell breath: glycolysis, the citrus extract cycle, and oxidative phosphorylation. Glycolysis, pyruvate oxidation, the citric acid or Krebs cycle, and oxidative phosphorylation are the stages of cellular respiration.

Glucose  + Oxygen → Carbon Dioxide + Water + Energy

Learn more about cellular respiration

brainly.com/question/29760658

#SPJ1

Answer:

Step-by-step explanation:

Using a standard normal table, we can find the area under the curve between 1.20 and 1.85 to be approximately 0.4678. Therefore, the answer is (c) 0.4678.

To find the smallest value of n for which the sum of the series is accurate to within 0.00001, we need to use the formula for the remainder of a convergent series:

R_n = |S - S_n|

where R_n is the remainder, S is the sum of the series, and S_n is the sum of the first n terms.

We want R_n to be less than or equal to 0.00001, so we have:

|R_n| ≤ 0.00001

Substituting the given values, we get:

|(2n+1)^4/5 - 51| ≤ 0.00001

Simplifying and taking the fifth root, we get:

2n+1 ≤ (51.00001)^(1/4)

2n+1 ≤ 3.1673

n ≤ 1.5836

Since n has to be an integer, the smallest value of n that satisfies this inequality is n = 1.

Therefore, we need at least 1 term of the series to get a sum accurate to within 0.00001.

Note: This is a bit of a tricky question because the given series converges very quickly, so only one term is needed to get a sum accurate to within 0.00001.
To determine how many terms of the series are needed so that the sum is accurate to within 0.00001, we can use the remainder estimation theorem.

Given the desired remainder, 0.00001, and the error tolerance, 0.0005, we can find the smallest integer value of n that satisfies these conditions. Since the series is a convergent alternating series, the remainder is less than the absolute value of the (n+1)th term. Therefore, we need to find the smallest integer value of n for which:

|(2n + 1)^(-4)/51| < 0.00001

Solving for n, we can determine the smallest value that meets this criterion. By trial and error or using a calculator, we can find that the smallest integer value of n that satisfies this condition is n = 6.

Visit here to learn more about sum brainly.com/question/29034036

#SPJ11

After continuing this process recursively until all integers are placed in the MIN HEAP. Using this method, we can see that there is only one possible MIN HEAP that can be made using the given set of integers. Therefore, the answer of the Binary Tree is 1.

Given the set of integers {88, 2, 9, 36}, there are 3 different Min Heaps that can be made using these integers. Min Heap is a binary tree where the parent node has a value less than or equal to its child nodes.

To determine the number of different MIN HEAPs that can be made using the set of integers {88, 2, 9, 36}, we can use the formula for the number of distinct permutations of n elements, which is n!. However, we need to take into account that MIN HEAP has a specific structure where the parent node is always smaller than its children nodes.

Then, we can choose the next smallest integer (9 or 36) as the left child of 2, and the remaining integer as the right child of 2. We can continue this process recursively until all integers are placed in the MIN HEAP.

Here are the 3 different Min Heaps:

1.       2
      /     \
    9        36
  /
88

2.       2
      /     \
    88      9
  /
36

3.       2
      /     \
    36       9
  /
88

These Min Heaps satisfy the condition of having the parent nodes with smaller values than their child nodes.

Learn more about Binary Tree:

brainly.com/question/29993738

#SPJ11

The equation for the total number of coins is given as follows:

x + y = 12.

The equation for the total value of the coins is given as follows:

0.1x + 0.05y = 2.4.

The variables for the system of equations are defined as follows:

They have a total of 12 coins, hence the equation for the total number of coins is given as follows:

x + y = 12.

Considering the value of each coin, 10 cents = 0.1 and 5 cents = 0.05, the  equation for the total value of the coins is given as follows:

0.1x + 0.05y = 2.4.

More can be learned about a system of equations at https://brainly.com/question/13729904

#SPJ1

The equation for the total number of coins is given as follows:

x + y = 12.

The equation for the total value of the coins is given as follows:

0.1x + 0.05y = 2.4.

The variables for the system of equations are defined as follows:

They have a total of 12 coins, hence the equation for the total number of coins is given as follows:

x + y = 12.

Considering the value of each coin, 10 cents = 0.1 and 5 cents = 0.05, the  equation for the total value of the coins is given as follows:

0.1x + 0.05y = 2.4.

More can be learned about a system of equations at https://brainly.com/question/13729904

#SPJ1

1) The Taylor series for sin(x) at x=0 is as follows: sin(x) = x - x3/3! + x5/5! - x7/7! +...

This series' radius of convergence is infinite.

2) The Taylor series for ex near x=0 is as follows: ex = 1 + x + x2/2! + x3/3! + x4/4! +...

This series' radius of convergence is infinite.

3) The Taylor series for x near x=1 is as follows: x = 1 + (x-1)

This series has a radius of convergence of one because it converges exclusively for |x-1| 1.

4) The Taylor series for x2 around x=0 is as follows: x2 = 0 + x2

This series' radius of convergence is infinite.

Learn more about Taylor series here:

https://brainly.com/question/29733106

#SPJ1

A proportional relationship is a type of relationship between two quantities in which they maintain a constant ratio to each other.

The equation that defines the proportional relationship is given as follows:

y = kx.

In which k is the constant of proportionality, representing the increase in the output variable y when the constant variable x is increased by one.

The constant for this problem is given as follows:

k = y/x

k = 16/7.

Hence the equation is:

y = 16x/7.

The outputs for the given inputs are given as follows:

When y = 22, the input is given as follows:

22 = 16x/7

x = 22 x 7/16

x = 77/8.

More can be learned about proportional relationships at https://brainly.com/question/7723640

#SPJ1

Answer:

To solve for x and y, we can use algebraic manipulation and substitution. Here are the steps:

Rearrange the first equation to solve for y in terms of x:

y = 2 - x

Substitute this expression for y into the second equation, and simplify:

x^3 + (2-x)^3 = 56

x^3 + 8 - 12x + 6x^2 - 3x^3 = 56

-2x^3 + 6x^2 - 12x + 8 = 0

Divide both sides by -2 to simplify the equation:

x^3 - 3x^2 + 6x - 4 = 0

Try to find a root of the equation using synthetic division or guess and check. One possible root is x = 2. Substituting this back into the first equation gives:

2 + y = 2

y = 0

So the solution is x=2 and y=0.

Therefore, the solution to the system of equations is x = 2 and y = 0.

For a wooden beam has a rectangular cross section with height, h and width, w. The dimensions of the strongest beam that can be cut from a round log of diameter d = 22 inches are equal to 7.33 inches × 17.96 inches.

Mathematically, a dimension of a space is defined as the smallest number of coordinates required to determine any point within it. It is used as a measurement of the size of an object. Commonly it is expressed as length, width, and height. We have a wooden beam has a rectangular cross section,

height of beam = h

Width of beam = w

The strength of beam = S

Now, strength S of the beam is directly proportional to the width and the square of the height, that is S ∝ wh²

=> S = kwh², where k ->constant of proportionality.

The strongest beam that can be cut from a round log of diameter d = 22 inches

From the figure, d² = h² + w²

=> 22² = h² + w²

=> h² = 484 - w²

plug this value in above equation, S = kw(484 - w²)

For maximum of strength, dS/dw = 0 ( critical values)

=> [tex]\frac{ d( kw(484 - w²)}{dw} = 0[/tex]

=> k( 484 - 3w²) = 0

=> 484 - 3w² = 0

=> w² = 484/3

=> w = 22/√3 = 7.33

then, h² = 484 - w²

[tex]h^2= 484 - \frac{ 484}{3} [/tex]

=> [tex] h^2= 2( \frac { 484}{3} )[/tex]

=> [tex]h = (\frac{ \sqrt2}{\sqrt3} )22[/tex]

= 17.96

Hence, required value is 17.96 inches.

For more information about dimensions, visit :

https://brainly.com/question/28107004

#SPJ4

Complete question:

A wooden beam has a rectangular cross section of height h and width w (see figure). The strength S of the beam is directly proportional to the width and the square of the height. What are the dimensions of the strongest beam that can be cut from a round log of diameter d = 22 inches? Round your answers to two decimal places.

The reference angle for 138 is 58.

Let's first sketch the angle and then find its reference angle using the terms you mentioned.

Step 1: Sketch the angle 13π/8
To sketch the angle, first, we need to determine its position on the coordinate plane. Since 13/8 is greater than  (or 8/8), it's located in the third quadrant. As a full circle is 2 (or 16/8), we can determine the angle measured counterclockwise from the positive x-axis as:
Angle = 13π/8

Step 2: Find the reference angle
A reference angle is an acute angle formed between the terminal side of the angle and the x-axis. In the third quadrant, the reference angle is calculated as:
Reference Angle = Angle - π

Now we substitute the values:
Reference Angle = 13π/8 - 8π/8 = 5π/8

So, the reference angle for 138 is 58.

Visit here to learn more about reference angle:

brainly.com/question/1603873

#SPJ11

The minimum number of supports required is 7.

To determine the minimum number of supports required for the twenty-four feet (six 4-ft sections) of track lighting to be installed in a continuous row in a retail store, follow these steps:

1. Determine the total length of the track lighting: 6 sections * 4 feet per section = 24 feet.

2. Consider that a support is needed at the beginning and end of the track.

3. Assess the spacing between supports. For instance, let's assume supports can be placed every 4 feet.

4. Calculate the number of supports in between the ends: (24 feet - 4 feet) / 4 feet = 5 supports.

5. Add the supports at the beginning and end: 5 supports + 2 supports = 7 supports.

The minimum number of supports required is 7.

Learn more about length here,

https://brainly.com/question/31573578

#SPJ11

The probability that you win is given as follows:

25/81.

Hence it is not true that you are more likely to win, as the probability of winning is less than 50%. Even tough there are more odd numbers than even number, you need two odd numbers for the product to generate an odd number.

A probability is calculated as the division of the desired number of outcomes by the total number of outcomes in the context of a problem/experiment.

For the product of two numbers, we have that:

5(1, 3, 5, 7 and 9) out of the 9 numbers, are odd, hence the probability of choosing two odd numbers is given as follows;

5/9 x 5/9 = 25/81.

More can be learned about probability at brainly.com/question/24756209

#SPJ1

The value of c is -10/3. This can be answered by the concept of Differentiation.

To find the values of c for which the parabolas y = 9x² and x = c + 3y² intersect at right angles, we need to consider the slopes of the tangent lines at the intersection points.

First, let's find the derivatives of both functions to get the slopes:

For y = 9x², let's find dy/dx:
dy/dx = 18x

For x = c + 3y², let's find dx/dy:
dx/dy = 1 / (6y)

At the intersection points, we have:
9x² = y
c + 3y² = x

Since the tangent lines are perpendicular, their slopes multiply to -1:
(18x)(1 / (6y)) = -1

Now, substitute y = 9x² into the equation:
(18x)(1 / (6 × 9x²)) = -1
(18x)(1 / (54x²)) = -1
(1 / (3x)) = -1

Solving for x, we get x = -1/3.

Now substitute this value of x into the equation for y:
y = 9(-1/3)²
y = 9(1/9)
y = 1

So the intersection point is (-1/3, 1). Now substitute the value of y back into the equation for x to find c:
-1/3 = c + 3(1²)
-1/3 = c + 3
c = -1/3 - 3
c = -10/3

Therefore, the value of c is -10/3.

To learn more about Differentiation here:

brainly.com/question/24898810#

#SPJ11

Since the function f(x) = x², g(x) include the following: D. g(x) = (1/3x)².

In Mathematics and Geometry, a transformation can be defined as the movement of a point from its initial position to a new location. This ultimately implies that, when a function or object is transformed, all of its points would also be transformed.

In Mathematics and Geometry, a dilation simply refers to a type of transformation which typically changes the size of a geometric object, but not its shape.

Based on the graph, we can logically deduce that function g(x) can be produced by vertically stretching the parent function by a scale factor of 1/3;

g(x) = 1/3f(x)

g(x) = (1/3x)²

g(x) = (1/9)x²

Read more on transformation here: https://brainly.com/question/10754933

#SPJ1

To determine the generating function for the sequence h0, h1, h2,..., hn,...., we first need to express the sequence in terms of a polynomial. Using the formula for binomial coefficients, we have:

hn = (n C 2) = n!/(2!(n-2)!) = (1/2)n(n-1)

So, the sequence can be expressed as the polynomial:

h(x) = 0 + (1/2)x(x-1) + (1/2)2(2-1)x(x-1)(x-2) + ... + (1/2)n(n-1)x(x-1)(x-2)...(x-n+1) + ...

Now, we can use the definition of a generating function to write:

H(x) = h0 + h1x + h2x^2 + ... + hnx^n + ...

H(x) = (1/2)0(0-1) + (1/2)1(1-1)x + (1/2)2(2-1)x^2 + ... + (1/2)n(n-1)x^n + ...

H(x) = 0 + 0x + (1/2)x^2 + (1/2)2x^3 + ... + (1/2)n(n-1)x^(n+1) + ...

Hence, the generating function for the sequence h0, h1, h2,..., hn,.... is:

H(x) = (1/2) x^2 (1 + 2x + 3x^2 + ...)

Given the sequence h_n = C(n, 2), where n ≥ 0, we want to find the generating function for this sequence. The generating function, G(x), is defined as the formal power series:

G(x) = h_0 + h_1x + h_2x^2 + h_3x^3 + ...

We know that h_n = C(n, 2) = n(n - 1)/2 for n ≥ 0. So, we can rewrite the generating function as:

G(x) = h_0 + h_1x + h_2x^2 + h_3x^3 + ... = ∑ [n(n - 1)x^n / 2] for n ≥ 0.

By using the binomial theorem, we can express G(x) as:

G(x) = 1/2 * (x * d/dx)^2 (1 - x)^(-1)

Here, (x * d/dx) is the operator that represents the derivative with respect to x multiplied by x. By applying this operator twice to (1 - x)^(-1) and then multiplying the result by 1/2, we obtain the generating function for the sequence.

Visit here to learn more about polynomial brainly.com/question/11536910

#SPJ11

To find the surface area, you add up the area of the lateral faces and the area of the bases. The area of the triangular bases is 10.5 inches squared, and the area of the lateral faces is (3.5 * 9) + (4.5 * 9) + (3 * 9) = 99 inches squared. 10.5 + 99 = 109.5 inches squared

The frequency response of the LTI system described by the difference equation y[n] = 3x[n] + 2x[n-1] + x[n-2] is given by H( [tex]e^j^\omega[/tex] ) = 3 + 2e^(-jω) +

[tex]e^-^2^j^\omega[/tex] .


1. Convert the difference equation to the frequency domain using the Fourier transform.
2. Replace x[n] with X( [tex]e^j^\omega[/tex]) and y[n] with Y( [tex]e^j^\omega[/tex]).
3. Solve for the transfer function H( [tex]e^j^\omega[/tex]) = Y( [tex]e^j^\omega[/tex]) / X( [tex]e^j^\omega[/tex]).

For the given difference equation:
Y( [tex]e^j^\omega[/tex]) = 3X( [tex]e^j^\omega[/tex]) + 2X( [tex]e^j^\omega[/tex])[tex]e^-^j^\omega[/tex] + X( [tex]e^j^\omega[/tex]) [tex]e^-^2^j^\omega[/tex]

Divide both sides by X( [tex]e^j^\omega[/tex]):
H( [tex]e^j^\omega[/tex]) = Y( [tex]e^j^\omega[/tex]) / X( [tex]e^j^\omega[/tex]) = 3 + 2[tex]e^-^j^\omega[/tex] +  [tex]e^-^2^j^\omega[/tex]

This expression represents the frequency response of the given LTI system.

To know more about Fourier transform click on below link:

https://brainly.com/question/29063535#

#SPJ11

Answer:

Step-by-step explanation:

Answer:

the mountains bring Pat joy because it is beautiful

only one I know

Step-by-step explanation:

:)

Answer: 38845

Step-by-step explanation:

Answer:

38,845

Step-by-step explanation:

Answer:

--------------------

Given equation:

    [tex]x+1=\sqrt{19-x}[/tex]

Square both sides, considering 19 - x ≥ 0  ⇒ x ≤ 19:

Solve the quadratic equation by factoring:

The matching choice is B.

Diverges. Series is not a geometric series as it does not have a common ratio. However, we can rewrite the series as:
7n + 18-n = 7n(1 + 18(-1/n))
As n approaches infinity, the second term inside the parentheses approaches 1, so we can write:
7n(1 + 18(-1/n)) ≈ 7n(1 + 0) = 7n
Thus, we can see that the series is a constant multiple of the series 7n, which is a geometric series with a common ratio of 7. Since the common ratio is greater than 1, the series diverges.

To determine if the series is convergent or divergent, we should  find the limit of the terms as n goes to infinity.
The series can be rewritten as: (7n) + (18(-n)n)

As n goes to infinity, the term 7n will also go to infinity. Meanwhile, the term 18(-n)n will approach 0 since any number

raised to a negative power becomes smaller as n increases. However, the 7n term dominates the series, so the limit of

the terms is not 0 as n goes to infinity.
Therefore, the series is divergent.  Diverges; the limit of the terms, an, is not 0 as n goes to infinity.

learn more on Geometric series  at: https://brainly.com/question/24643676

#SPJ11

x+y=10

225x+70y=1165 where x is number of slider in the combination

y is the number of chicken wing in the combination.

An equation is a mathematical statement that expresses the equality between two mathematical expressions. It typically consists of mathematical symbols, such as numbers, variables, and mathematical operators, arranged in a specific pattern or format.

A combination refers to a way of selecting or arranging objects without regard to their order, where the order of selection does not matter. A combination is a selection of objects where the arrangement or order of the objects is considered irrelevant.

Let x=number of slider

y= number of chicken wing

then, x+y= 10 ,

Since each slider has 225 calories and each chicken wing has 70 calories, then

225x+70y= 1165

Hence the system of equations are:

x+y=10

225x+70y=1165

Learn more about variables here:

https://brainly.com/question/29583350

#SPJ1