The shortest stopping distance is 85.07 meters.
To calculate the stopping distance, we use the formula d = (v²) / (2μg), where d is the stopping distance, v is the initial velocity, μ is the coefficient of kinetic friction, and g is the acceleration due to gravity.
1. Convert the initial velocity to meters per second: 35.0 m/s is already in the correct unit.
2. Use the given coefficient of kinetic friction: μ = 0.72.
3. Use the acceleration due to gravity: g = 9.81 m/s².
4. Plug the values into the formula: d = (35.0²) / (2 × 0.72 × 9.81).
5. Calculate the stopping distance: d = 85.07 meters.
By locking the brakes with a coefficient of kinetic friction of 0.72 and traveling at 35.0 m/s, the shortest distance to stop the automobile is 85.07 meters.
To know more about coefficient of kinetic friction click on below link:
https://brainly.com/question/29100737#
#SPJ11
Two students each holding an end of a slinky spring are 5.0 m apart It takes 0.60 seconds for a transverse pulse to travel from the student generating the pulse to the lab partner at the opposite end of the spring a. How long will t take for the reflected pulse to return to the generating student? When a second pulse of twice the original amplitude is sent, will the pulse take more time, less time, or the same time to reach the far end of the spring? Explain your answer b. c. The students move so that they are now farther apart but use the same spring. Compare the speed of a pulse on the more stretched spring to the speed of the pulse when they were 5.0 m apart Explain your answer. d. The students move back to their original separation of 5.0 m. The generator produces a longitudimal pulse in the spring. How does the speed of this pulse compare to that of the transverse pulse?
The speed of the longitudinal pulse will be different from the speed of the transverse pulse.The speed of longitudinal pulses is determined by the bulk modulus of the spring, which is different from the properties that determine the speed of transverse pulses.
How does the speed of this pulse compare to that of the transverse pulse?Since the speed of a pulse on a spring is determined by the properties of the spring and not by the amplitude or frequency of the pulse, the time it takes for the reflected pulse to return to the generating student will be the same as the time it took for the original pulse to travel from one end of the spring to the other.
Therefore, it will take another 0.60 seconds for the reflected pulse to return to the generating student.
When a second pulse of twice the original amplitude is sent, the pulse will take the same time to reach the far end of the spring.
This is because the speed of the pulse is determined by the properties of the spring and not by the amplitude of the pulse.
When the students move farther apart, the spring becomes more stretched. The speed of a pulse on a spring is inversely proportional to the square root of the mass per unit length of the spring.
When the spring is more stretched, the mass per unit length increases, which causes the speed of the pulse to decrease.
Therefore, the speed of the pulse on the more stretched spring will be slower than the speed of the pulse when they were 5.0 m apart.
]When the students move back to their original separation of 5.0 m and the generator produces a longitudinal pulse, the speed of this pulse will be different from the speed of the transverse pulse.
Longitudinal pulses travel through the compression and rarefaction of the spring, whereas transverse pulses travel through the oscillation of the spring.
The speed of longitudinal pulses is determined by the bulk modulus of the spring, which is different from the properties that determine the speed of transverse pulses.
Therefore, the speed of the longitudinal pulse will be different from the speed of the transverse pulse.
Learn more about transverse pulse.
brainly.com/question/20039194
#SPJ11
guys please help me
Answer:
S = V T distance = speed * time
S1 = 20 * T1 = S/4 T1 = S / 80
S2 = 30 * T2 = 3 S / 4 T2 = S / 40
V = S / T = S / (T1 + T2)
T1 + T2 = S (1/40 + 1/80) = 120 S / 3200 = .0375 S
V = S / (.0375 S) = 26.7 average speed
If the intensity level by 15 identical engines in a garage is 100 dB, what is the intensity level generated by each one of these engines?a) 44 dBb) 67 dBc) 13 dBd) 88 dB
b) 67 dB. Each engine adds approximately 5.5 dB to the overall intensity level, so dividing by 15 gives the individual engine's intensity level.
To solve this problem, we need to use the fact that sound intensity level doubles for every increase of 3 dB. Since we have 15 identical engines, we can assume that each engine contributes equally to the overall sound intensity. Therefore, the sound intensity level of each engine can be found by dividing the total sound intensity level (100 dB) by 15.
Dividing 100 dB by 15 gives us approximately 6.67 dB per engine. However, since the intensity level doubles for every increase of 3 dB, we know that each additional engine will add approximately 5.5 dB to the overall intensity level.
Therefore, to find the intensity level of each engine, we can start with 100 dB and subtract 5.5 dB for each of the 14 additional engines, giving us an intensity level of approximately 67 dB for each engine.
learn more about intensity level here:
https://brainly.com/question/30101270
#SPJ11
if the radio operates at a current of 500 ma, what is the current through the primary winding?
The current through the primary winding if the radio operates at a current of 500 mA, the current through the primary winding is also 500 mA.
A transformer is a device that transfers electrical energy from one circuit to another through electromagnetic induction. It consists of two coils of wire, called the primary winding and the secondary winding, wrapped around a common magnetic core. When an alternating current (AC) flows through the primary winding, it creates a changing magnetic field that induces a voltage in the secondary winding. The voltage induced in the secondary winding depends on the ratio of the number of turns in the primary winding to the number of turns in the secondary winding. The current through the primary winding of a transformer depends on the voltage and impedance (resistance) of the circuit it is connected to. The current in the primary winding is not necessarily the same as the current in the secondary winding, since the voltage and impedance of the two circuits can be different.
The current through the primary winding is also 500 mA is because the current in the primary winding directly supplies power to the radio, and therefore they share the same current value.
Learn more about primary winding: https://brainly.com/question/28865089
#SPJ11
A bicyclist notes that the pedal sprocket has a radius of rp = 9. 5 cm while the wheel sprocket has a radius of rw = 4. 5 cm. The two sprockets are connected by a chain which rotates without slipping. The bicycle wheel has a radius R = 65 cm. When pedaling the cyclist notes that the pedal rotates at one revolution every t = 1. 7 s. When pedaling, the wheel sprocket and the wheel move at the same angular speed. (a) Calculate the angular speed of the wheel sprocket ωw, in radians per second. (b) Calculate the linear speed of the bicycle v, in meters per second, assuming the wheel does not slip across the ground. (c) If the cyclist wanted to travel at a speed of v2 = 3. 5 m/s, how much time, in seconds, should elapse as the pedal makes one complete revolution?
(a) The angular speed of the wheel sprocket is 8.47 rad/s. (b) The linear speed of the bicycle is 5.5 m/s. (c) To travel at a speed of 3.5 m/s, it takes the pedal 1.17 seconds to make one complete revolution.
(a) To find the precise speed of the wheel sprocket, we can utilize the proportion of the radii.
ωw = (rp/rw) * ωp = (9.5 cm/4.5 cm) * (2π rad/1 fire up) * (1 fire up/1.7 s) = 8.47 rad/s.
(b) The direct speed of the bike is given by v = R * ωw, where R is the sweep of the bike wheel.
v = 65 cm * 8.47 rad/s = 5.5 m/s.
(c) To make the opportunity it takes for the pedal to make one complete transformation at a speed of 3.5 m/s, we can utilize the equation v = R * ωp, where v = 3.5 m/s and R = 65 cm.
ωp = v/R = 3.5 m/s/0.65 m = 5.38 rad/s.
The ideal opportunity for one unrest is T = 2π/ωp = 2π/5.38 rad/s = 1.17 s/fire up.
To learn more about speed and radius, refer:
https://brainly.com/question/30557816
#SPJ4
What magnitude impulse will give a 2.0kg object a momentum change of magnitude +50 kgm/s?The answer is +50Ns, can someone explain this showing work? Thank you!
The magnitude impulse needed to change the momentum of the 2.0 kilogramme item by +50 kg m/s is +50 Ns.
To find the magnitude impulse that will give a 2.0 kg object a momentum change of magnitude +50 kgm/s, we can use the impulse-momentum theorem.
1. Understand the impulse-momentum theorem: The impulse-momentum theorem states that the impulse (I) applied to an object is equal to the change in momentum (Δp) of the object, or I = Δp.
2. Identify the given values: In this problem, you're given the mass (m) of the object as 2.0 kg and the change in momentum (Δp) as +50 kgm/s.
3. Use the impulse-momentum theorem to find the impulse: Since we know that I = Δp, we can plug in the given value of Δp to find the impulse (I):
I = +50 kgm/s
4. Verify that the answer is in the correct units: The units of impulse are Newton-seconds (Ns), and since our calculated impulse is +50 kgm/s, we can confirm that it is equivalent to +50 Ns, as 1 Ns is equal to 1 kgm/s.
So, the magnitude impulse that will give a 2.0 kg object a momentum change of magnitude +50 kgm/s is +50 Ns.
For more such questions on magnitude , click on:
https://brainly.com/question/30337362
#SPJ11
if the mass of the spider is 5.0×10−4kg, and the radial strands are all under the same tension, find the magnitude of the tension, t
The magnitude of the tension in each radial strand is approximately 4.91×[tex]10^{-3}[/tex] N.
To find the magnitude of the tension, t, we can use the equation:
t = (m * [tex]v^2[/tex]) / r. Where m is the mass of the spider, v is its velocity, and r is the radius of the circular path it is moving along. However, since we are given that the spider is stationary and hanging from radial strands, we can use a simpler formula:
t = m * g
Where g is the acceleration due to gravity, which is approximately 9.81 [tex]m/s^2[/tex] on Earth.
Substituting the given mass of the spider, we get:
t = (5.0×[tex]10^{-4[/tex] kg) * 9.81 [tex]m/s^2[/tex]
t = 4.91×[tex]10^{-3}[/tex] N
For more question on Tension, click:
https://brainly.com/question/29466375
#SPJ11
A bicycle with tires 68 cm in diameter travels 8.0 km. How many revolutions do the wheels make?
The circumference of a circle is given by the formula C = πd, where C is the circumference and d is the diameter of the circle. Therefore, the circumference of each tire is:
C = πd = π(68 cm) ≈ 213.63 cm
To find the number of revolutions made by the wheels, we need to know the distance traveled by the bicycle in terms of the circumference of the wheels. We can use the formula:
distance = number of revolutions * circumference
Rearranging this formula, we get:
number of revolutions = distance / circumference
Substituting the given values, we get:
number of revolutions = 8.0 km / (2π × 0.68 km) ≈ 58.5 revolutions
Therefore, the wheels of the bicycle make approximately 58.5 revolutions.
Learn more about diameter here:
https://brainly.com/question/5501950
#SPJ11
You've decided to protect your house by placing a7.0-m-tall iron lightning rod next to the house. The top is sharpened to a point and the bottom is in good contact with the ground. From your research, you've learned that lightning bolts can carry up to 45kA of current and last up to 50 ?s.Part AHow much charge is delivered by a lightning bolt with these parameters?Express your answer to two significant figures and include the appropriate units.Part BYou don't want the potential difference between the top and bottom of the lightning rod to exceed 130V . What minimum diameter must the rod haveExpress your answer to two significant figures and include the appropriate units
Therefore, the minimum diameter of the rod should be approximately 7.2 mm.
Part A: The charge delivered by a lightning bolt can be calculated using the equation:
Q = I * t
where Q is the charge, I is the current, and t is the time.
Substituting the given values, we get:
Q = (45,000 A) * (50 μs) = 2,250 C
Therefore, the charge delivered by the lightning bolt is 2,250 coulombs.
Part B: The potential difference between the top and bottom of the lightning rod can be calculated using the equation:
V = Ed
V - potential difference, E is the electric field, and d is the distance between the top and bottom of the rod.
Assuming a uniform electric field between the top and bottom of the rod, we can calculate the electric field using:
E = V / d
Substituting the given values, we get:
E = (130 V) / (7.0 m) = 18.6 V/m
We can then use the equation for the electric field of a charged rod:
E = λ / (2πε₀r)
λ is the charge density, ε₀ is the permittivity of free space, and r is the radius of the rod.
Solving for the radius, we get:
r = λ / (2πε₀E)
We can approximate the charge density of the lightning rod as the total charge divided by its length, so:
λ ≈ Q / h
h - height of the rod. Substituting the given values, we get:
λ ≈ (2,250 C) / (7.0 m) = 321 C/m
Substituting this value and the given values for ε₀ and E, we get:
r = (321 C/m) / [tex](2 * pi (8.85 * 10^{-12} F/m)(18.6 V/m))[/tex]
r ≈[tex]3.6 * 10^{-3} m[/tex]
Learn more about potential difference visit: brainly.com/question/24142403
#SPJ4
7. A cylindrical wire has a resistance R and resistivity p. Ifits length and diameter are BOTH cut in half, what will be its resistivity? a) 4p c) rho d) p/2 e) p/4
The resistivity of the wire does not change when both its length and diameter are cut in half. The answer is (c) rho.
The resistance of a wire is given by the formula:
R = (ρ * L) / A
where R is resistance, ρ is resistivity, L is length, and A is the cross-sectional area of the wire.
For a cylindrical wire, the cross-sectional area is given by:
A = Π * (d/2)²
where d is the diameter of the wire.
If the length and diameter of the wire are both cut in half, then the new length and diameter are:
L' = L/2
d' = d/2
The new cross-sectional area is:
A' = Π * (d'/2)² = (Π/4) * d²
The new resistance is:
R' = (ρ * L') / A' = (ρ * L/2) / [(Π/4) * d²] = (2ρ * L) / (Π * d²)
We can write the new resistivity as ρ':
ρ' = R' * A' / L' = [(2ρ * L) / (Π * d²)] * [(Π/4) * d²] / (L/2) = ρ
The answer is (c) rho.
To know more about resistivity here:
https://brainly.com/question/29427458#
#SPJ11
Since S is a closed surface, with a definite inside and outside, it encloses a well defined volume. If all the charges in the system are simple point charges, one can simply identify which point charges are inside the volume and sum their values. Another simple case is when the charge density in the volume is uniform, or constant. Then the enclosed charge is given by the product of the volume V inside S and the charge density rho; that is, qEnclosed = rhoV. Care must be taken to include only the charge inside S. If part of a charge distribution is not inside S (that is, some parts poke through the surface), only the part inside S contributes to qEnclosed.
If the charge density is a function of R only, it can still have rotational symmetry. (In this case, the shape is not changed by any rotation about the axis of symmetry.) Then the enclosed charge may be found by integration. To minimize confusion, we will use the variable R to refer to the radial coordinate of a position in the charge distribution (the cylinder). We will use the variable r to refer to the radius of our Gaussian surface.
In your calculus class, you used the method of cylindrical shells to determine the volume of shapes with rotational symmetry. You can use the same method to determine the total charge in such an object by introducing a factor of rho, the volume charge density. In the shell method, the volume of a thin cylindrical shell is given by1
∆V = 2πhRdr
the volume of the cylinder as the sum of the volumes of a series of N thin cylindrical shells of radii R1,R2,R3...RN. If we take the thickness of each shell to be ∆R = RCyl/N, we can construct a series of shells with radii RJ = J∆R, where (J = 1,2,3...N). As N goes to infinity the sum of the shell volumes VJ becomes an integral, and the integral yields the exact value of VCyl. (This is the definition of an integral according to Riemann.) The progression from thin shells to integrals can be written:
NN
VCyl = lim ∑ ∆VJ = lim ∑ 2πhRJ∆R = 2πhRdR (3.5)
RCyl x→[infinity] J=0 x→[infinity] J=0 0
To find the charge enclosed in the entire cylinder, qCyl, one need only add a factor of rho to the integral.
RCyl 0
You can find qCyl for almost any charge distribution rho(R) that depends only on R. If the radius of your Gaussian surface is greater than the radius of the cylinder, qEnclosed = qCyl; the upper limit of integration is then RCyl, as in Equation 3.6. If the radius of your Gaussian surface is less than the radius of the cylinder, you must include only the charge inside the Gaussian surface. To get qEnclosed, you reduce the upper limit of the integral from RCyl to r, the radius of your Gaussian surface.
Problem 5a
Compute the total charge inside in a cylinder of length h and radius RCyl when rho(R) = αR. Use the result to compute the electric field produced by the cylinder at points outside the cylinder (r > RCyl). Note that since r > RCyl, the Gaussian surface (with radius r) encloses all the charge in the cylinder. State the direction of the electric field inside and outside the cylinder when α > 0, that is, when the cylinder carries positive charge.
The total charge inside a cylinder of length h and radius RCyl with charge density rho(R) = αR is given by qEnclosed = ∫(αR × 2πhRdR) from 0 to RCyl.
The electric field at points outside the cylinder (r > RCyl) is given by E = (1 / 4πε₀) × (qEnclosed / r²).
The direction of the electric field is radially outward when α > 0 (positive charge).
1. Integrate the charge density function to find the total charge: qEnclosed = ∫(αR × 2πhRdR) from 0 to RCyl.
2. Calculate the electric field at points outside the cylinder using Gauss's law: E = (1 / 4πε₀) × (qEnclosed / r²).
3. Determine the direction of the electric field. For α > 0 (positive charge), the electric field is radially outward.
To know more about Gauss's law click on below link:
https://brainly.com/question/2854215#
#SPJ11
(a) Convert 10.0 degrees, θ2-20.0 degrees, and θ3-70.0 degrees to radians. (b) Calculate the sine of each angle and compare it to θ measured in radians. (c) What conclusion do you draw concerning θ and sinθ for small angles when θ is measured in radians? (d) For the equation, sin θ = n sin φ + c, assume that you plot a graph of sinθversus sin φ. What are the slope and intercept of the graph?
In radians (a) 0.1745 rad, 0.3941 rad, 1.2217 rad (b) sin(0.1745 radians), sin(0.3491 radians), sin(1.2217 radians) (c) sin(theta) equals to theta (d) slope = n, y intercept = -c
(a) To convert degrees to radians, we use the formula:
radians = degrees * (π/180)
Using this formula:
[tex]10.0 degrees = 10.0 * (\pi /180) radians = 0.1745 radians\\ 20.0 degrees = 20.0 * (\pi /180) radians = 0.3491 radians\\ 70.0 degrees = 70.0 * (\pi /180) radians = 1.2217 radians[/tex]
(b) The sine of an angle can be calculated using a calculator or a table of trigonometric functions. Using a calculator, we get:
[tex]sin(10.0 degrees) = 0.1736 = sin(0.1745 radians)\\sin(20.0 degrees) = 0.3420 = sin(0.3491 radians)\\sin(70.0 degrees) = 0.9397 = sin(1.2217 radians)[/tex]
We can see that the values of sine are very close for the angles measured in degrees and radians.
(c) When θ is small and measured in radians,[tex]sintheta[/tex] is approximately equal to θ. This can be seen from the Taylor series expansion of sinθ:
[tex]sin(theta) = theta - (theta^3)/3! + (theta^5)/5! - (theta^7)/7! + ...[/tex]
For small values of θ, the higher order terms become negligible, and we are left with sinθ ≈ θ.
(d) The equation [tex]sin (theta) = n sin fi[/tex] + c can be rearranged as:
[tex]sin theta - c = n sin fi[/tex]
Let [tex]y = sin theta - c[/tex] and [tex]x = sin fi[/tex]. Then, we have equation:
y = nx
This is a linear equation of the form y = mx + b, where m is the slope and b is the y-intercept. In this case, the slope is n and the y-intercept is -c. So, the slope of the graph is equal to n, and the y-intercept is equal to -c.
Learn more about radians here:
https://brainly.com/question/7721249
#SPJ11
In radians (a) 0.1745 rad, 0.3941 rad, 1.2217 rad (b) sin(0.1745 radians), sin(0.3491 radians), sin(1.2217 radians) (c) sin(theta) equals to theta (d) slope = n, y intercept = -c
(a) To convert degrees to radians, we use the formula:
radians = degrees * (π/180)
Using this formula:
[tex]10.0 degrees = 10.0 * (\pi /180) radians = 0.1745 radians\\ 20.0 degrees = 20.0 * (\pi /180) radians = 0.3491 radians\\ 70.0 degrees = 70.0 * (\pi /180) radians = 1.2217 radians[/tex]
(b) The sine of an angle can be calculated using a calculator or a table of trigonometric functions. Using a calculator, we get:
[tex]sin(10.0 degrees) = 0.1736 = sin(0.1745 radians)\\sin(20.0 degrees) = 0.3420 = sin(0.3491 radians)\\sin(70.0 degrees) = 0.9397 = sin(1.2217 radians)[/tex]
We can see that the values of sine are very close for the angles measured in degrees and radians.
(c) When θ is small and measured in radians,[tex]sintheta[/tex] is approximately equal to θ. This can be seen from the Taylor series expansion of sinθ:
[tex]sin(theta) = theta - (theta^3)/3! + (theta^5)/5! - (theta^7)/7! + ...[/tex]
For small values of θ, the higher order terms become negligible, and we are left with sinθ ≈ θ.
(d) The equation [tex]sin (theta) = n sin fi[/tex] + c can be rearranged as:
[tex]sin theta - c = n sin fi[/tex]
Let [tex]y = sin theta - c[/tex] and [tex]x = sin fi[/tex]. Then, we have equation:
y = nx
This is a linear equation of the form y = mx + b, where m is the slope and b is the y-intercept. In this case, the slope is n and the y-intercept is -c. So, the slope of the graph is equal to n, and the y-intercept is equal to -c.
Learn more about radians here:
https://brainly.com/question/7721249
#SPJ11
Explain why ice floats in liquid water?
Ice floats in liquid water because it is less dense than liquid water. When water freezes, the molecules form a crystalline structure that spaces them out more than in the liquid state. This increase in space between the molecules causes the density of ice to be less than that of liquid water. As a result, ice floats on the surface of liquid water. This property of water is important for aquatic life, as it allows for the formation of a stable environment beneath the surface of frozen bodies of water.
Answer:
Ice floats in liquid water because it is less dense than liquid water. This is because the hydrogen bonds that hold water molecules together in ice are more ordered and spaced farther apart than in liquid water. As a result, there is more empty space between the water molecules in ice than in liquid water, making ice less dense.
This is counterintuitive since most substances become denser as they solidify. However, water is different because of the way its molecules interact. Water molecules are polar, meaning they have a slight positive charge on one end and a slight negative charge on the other end. This allows them to form hydrogen bonds with each other, which are stronger than the van der Waals forces that hold most other substances together.
When water freezes, the hydrogen bonds between water molecules become more ordered and form a crystalline structure. This structure has empty spaces between the water molecules, which makes ice less dense than liquid water. Because ice is less dense than liquid water, it floats on top of it. This is important for aquatic ecosystems since if ice were denser than liquid water, it would sink and accumulate at the bottom of bodies of water, which could have negative effects on the organisms living there.
What is the magnitude of the electric field at the dot?
The magnitude of the electric field at the dot is determined by the distance from the dot to the charge, the magnitude of the charge, and the electric constant (k).
To calculate the electric field at the dot, use the formula: E = k * |q| / r², where E is the electric field, k is the electric constant (8.99 x 10⁹ N m² C⁻²), q is the magnitude of the charge, and r is the distance between the dot and the charge.
1. Identify the charge's magnitude (q) and the distance from the dot to the charge (r).
2. Plug the values of q and r into the formula: E = k * |q| / r².
3. Calculate the electric field (E) using the given values and the electric constant (k).
Remember to consider the direction of the electric field, as it points away from positive charges and towards negative charges.
To know more about electric field click on below link:
https://brainly.com/question/15800304#
#SPJ11
if n = 1.28, what is the largest angle of incidence, θa , for which total internal reflection will occur at vertical face?
The largest angle of incidence, θa , for which total internal reflection will occur at vertical face is any angle greater than 51.06°.
To find the largest angle of incidence (θa) for total internal reflection at the vertical face, you need to use the critical angle formula:
Critical Angle (θc) = arcsin(1/n)
Where n is the refractive index.
In this case, n = 1.28. Plug the value into the formula:
θc = arcsin(1/1.28)
θc ≈ 51.06°
For total internal reflection to occur, the angle of incidence (θa) must be greater than the critical angle. Therefore, the largest angle of incidence for which total internal reflection will occur at the vertical face is any angle greater than 51.06°.
Learn more about angle of incidence here: https://brainly.com/question/30402542
#SPJ11
another switch allows one to adjuest the magnetic field so that it is either nearly uniform at the center or has a strong gradient. The latter means that the magnitude of the field changes rapidly along the vertical direction near the center. How does this switch change the current in the two coils?
Depending on the desired magnetic field configuration, the switch modifies the current in the coils to vary the magnetic field, making it either almost uniform or strongly gradient.
What are the two possible causes of a shift in flux?The magnetic flux across a loop can be altered in one of three ways: Alter the magnetic field's strength across the surface (raise, reduce). Adjust the loop's surface area.
Where does the magnetic field's strength reach its maximum?The bar magnet's magnetic field is strongest at its centre and weakest between its two poles. The magnetic field lines are least dense between the two poles and most dense at the centre.
To know more about magnetic field visit:-
https://brainly.com/question/24397546
#SPJ1
A body receives impulses of 24Ns and 35Ns inclined 55 to each other. Calculate the total impulse
The total impulse received by the body is approximately 42.43 Ns.
Impulse is a measure of the change in momentum of an object resulting from a force acting upon it for a period of time. It is defined as the product of the force and the time interval over which it acts, and is represented by the symbol "J".
To find the total impulse received by the body, we need to use vector addition to add the two impulses together. Since the impulses are at an angle of 55 degrees to each other, we can use the law of cosines to find the magnitude of the resultant impulse:
I² = 24² + 35² - 2(24)(35)cos(55)
I² = 576 + 1225 - 1680cos(55)
I² = 1801.9
I ≈ 42.43 Ns
To know more about impulse, here
brainly.com/question/30466819
#SPJ1
Young's experiment is performed with light from excited helium atoms (λ=502nm). Fringes are measured carefully on a screen 1.20 m away from the double slit, and the center of the twentieth fringe (not counting the central bright fringe) is found to be 10.6 mm from the center of the central bright fringe.What is the separation of the two slits?
To solve for the separation of the two slits in Young's experiment, we can use the equation:
d * sinθ = mλ
where d is the separation of the slits, θ is the angle of diffraction, m is the order of the fringe, and λ is the wavelength of the light.
First, we need to find the angle of diffraction for the twentieth fringe. Using the small angle approximation, we can assume that:
sinθ ≈ tanθ = y/L
where y is the distance from the central bright fringe to the twentieth fringe, and L is the distance from the slits to the screen.
Plugging in the given values, we have:
sinθ ≈ tanθ = y/L = 10.6 mm / 1.20 m ≈ 0.0088
Next, we can solve for the separation of the slits by rearranging the equation:
d = mλ / sinθ
Since we are measuring the twentieth fringe, m = 20. Plugging in the values, we get:
d = 20 * 502 nm / 0.0088 ≈ 1.14 × 10^-4 m
Therefore, the separation of the two slits is approximately 1.14 × 10^-4 meters.
Using the information provided, we can find the separation of the two slits in Young's experiment by applying the formula for fringe spacing in a double-slit interference pattern:
Δy = (m * λ * L) / d
where Δy is the fringe spacing, m is the fringe order, λ is the wavelength, L is the distance from the double slit to the screen, and d is the slit separation.
Given:
λ = 502 nm = 502 x 10^-9 m
L = 1.20 m
Δy = 10.6 mm = 10.6 x 10^-3 m
m = 20 (20th fringe)
Now, rearrange the formula to solve for d:
d = (m * λ * L) / Δy
Plug in the given values:
d = (20 * 502 x 10^-9 * 1.20) / (10.6 x 10^-3)
Calculate the result:
d ≈ 2.27 x 10^-6 m
The separation of the two slits is approximately 2.27 x 10^-6 meters, or 2.27 μm.
Visit here to learn more about fringe spacing brainly.com/question/17212031
#SPJ11
A magnetic field of magnitude 0.300 T is oriented perpendicular to the plane of a circular loop. (a) Calculate the loop radius if the magnetic flux through the loop is 2.70 wb. (b) Calculate the new magnetic flux if loop radius is doubled.
The circle's radius is 0.517 metres. The loop's new magnetic flux is 0.836 Wb.
(a) Given that the magnetic field has a magnitude of 0.300 T and the magnetic flux across the loop is 2.70 Wb, we have:
Φ = Bπ[tex]r^2[/tex]
[tex]2.70 Wb = 0.300 T \times \pi r^2[/tex]
[tex]r^2[/tex] = [tex]2.70 Wb / (0.300 T \times \pi)[/tex]
r = [tex]\sqrt{(2.70 Wb / (0.300 T \times \pi))[/tex] = 0.517 m
Therefore, the radius of the circular loop is 0.517 m.
(b) The new radius is if the loop radius is twice, then 2r = 1.034 m. The magnetic flux through the loop is given by the same formula Φ = Bπ[tex]r^2[/tex], but with the new radius. Therefore, we have:
Φ' = Bπ[tex](2r)^2[/tex]
Φ' = Bπ(4[tex]r^2[/tex])
Φ' = 4Bπ[tex]r^2[/tex]
The result of substituting the values of B and r is:
Φ' = 4(0.300 T)π[tex](0.517 m)^2[/tex]
Φ' = 0.836 Wb
The quantity of magnetic field travelling through a specific surface is measured by magnetic flux. It is denoted by the symbol and is defined as the sum of the surface area perpendicular to the magnetic field's area A and magnetic field intensity B. In mathematics, is equal to BAcos(), where is the angle formed by the magnetic field and the surface normal.
Due to its critical significance in the behaviour of magnetic materials and the interplay between magnetic fields and electric currents, magnetic flux is a key term in the study of electromagnetism. Additionally, it plays a crucial role in the construction and functioning of a variety of electrical appliances, like as transformers, motors, and generators.
To learn more about Magnetic flux visit here:
brainly.com/question/31501008
#SPJ4
The magnetic flux through a coil of wire containing two loops changes at a constant rate from-52Wb to +70Wb in 0.77s .
What is the magnitude of the emf induced in the coil?
Express your answer to two significant figures and include the appropriate units.
The coil's induced emf is measured at a value of 1386T. According to Faraday's rule, the quantity of, or the amount of induced emf, is equal to the number of coil turns times sub B over t, where sub B, as we've seen, can be represented as B times A.
How much induced emf does the coil experience when the field changes?The magnetic flux rate of change divided by the coil's turn count yields the induced emf in a coil.
Change of magnetic flux through a coil of wire = B -A
= 70Wb - 52Wb
= 18Wb
The magnetic flux in one turn of the coil = ϕ = BA
= 18*77
=1386T
To know more about magnetic flux visit:-
https://brainly.com/question/30858765
#SPJ1
An unstable particle of mass M decays into two identical particles each of mass m . Obtain an expression for the velocities of the two decay particles in the lab frame (a) if M is at rest in the lab and (b) if M has total energy 4mc2 when it decays and decay particles move along the direction of M. ( you have use relativistic momentum equation
(a) If M is at rest in the lab frame, the total energy and momentum of the system must be conserved. Let the velocities of the two decay particles be v1 and v2, and let the angle between them be θ. Then, conservation of energy and momentum give:
[tex]M c^2 = 2 m γ c^2[/tex]
0 = m v1 cosθ + m v2 cos(π - θ) = m (v1 - v2 cosθ)
0 = m v1 sinθ - m v2 sin(π - θ) = m (v1 + v2 sinθ)
where γ is the Lorentz factor given by γ = (1 - [tex]v^2/c^2)^(-1/2).[/tex]
Solving these equations for v1 and v2, we get:
v1 = v2 = [tex](M^2 - 4 m^2 c^2)^1/2 / (2m)[/tex]
(b) If M has total energy 4mc^2 when it decays and decay particles move along the direction of M, then the total momentum of the system is zero in the rest frame of M. Let the velocity of M in the lab frame be v, and let the velocities of the two decay particles be v1 and v2, both in the same direction as M. Then, conservation of energy and momentum give:
[tex]4 m c^2 = γM c^2[/tex]
0 = m γ v - m v1 - m v2 = m γ v - 2 m v1
where we have used the fact that the decay particles have the same velocity. Solving for v1, we get:
v1 = γ v / 2
Substituting the expression for γ in terms of v and solving for v1, we get:
[tex]v1 = (3/4)^1/2 v[/tex]
Therefore, the velocities of the two decay particles in the lab frame are v1 = v2 = (M/[tex]^2 - 4 m^2 c^2)^1/2[/tex] (2m) in case (a) and v1 = [tex](3/4)^1/2[/tex] v in case (b).
To know more about decay here
https://brainly.com/question/27822382
#SPJ4
Identify the correct information about the kinetic energy (KE) and potential energy (PE) of each point in the path of the pendulum. Assume points A and Care the maximum height of the pendulum. Answer Bank :- Min KE Max PE - Max KE Max PE - MKE Min KE - Min PE Min PE
The correct information about the kinetic energy (KE) and potential energy (PE) at each point in the path of the pendulum: Point A: Min KE, Max PE, -Point B: Max KE, Min PE, - Point C: Min KE, Max PE.
Point A: At the maximum height, the pendulum has no motion, so it has minimum kinetic energy (Min KE). However, its potential energy is at its maximum due to its height (Max PE). So, Point A has Min KE and Max PE.
Point B: At the midpoint of the pendulum's swing, it reaches its maximum speed, giving it maximum kinetic energy (Max KE). The potential energy is at its minimum here because the pendulum is at its lowest point in the swing (Min PE). So, Point B has Max KE and Min PE.
Point C: This point is similar to Point A, as it is also at the maximum height of the pendulum. Therefore, Point C has minimum kinetic energy (Min KE) and maximum potential energy (Max PE).
In summary:
- Point A: Min KE, Max PE
- Point B: Max KE, Min PE
- Point C: Min KE, Max PE
More on energy: https://brainly.com/question/22393418
#SPJ11
A Ferris wheel on a California pier is 27 m high and rotates once every 32 seconds in the counterclockwise direction. When the wheel starts turning, you are at the very top.
What is your angular position 75 seconds after the wheel starts turning, measured counterclockwise from the top? Express your answer as an angle between 0∘ and 360∘.
Express your answer in degrees.
θ =
What is your speed v?
Express your answer with appropriate units.
v =
A Ferris wheel on a California pier is 27 m high and rotates once every 32 seconds in the counterclockwise direction. When the wheel starts turning, the angular position 75 seconds after the wheel starts turning, measured counterclockwise from the top, is 268 degrees.Speed of the Ferris wheel is 5.31 meters/second.
To solve this problem, we need to use the equation:
θ = θ₀ + ωt
where θ is the angular position, θ₀ is the initial angular position (in this case, at the very top), ω is the angular velocity (which is equal to 2π/T, where T is the period of rotation), and t is the time elapsed.
First, we need to find the period of rotation:
T = 32 seconds
Therefore, the angular velocity is:
ω = 2π/T = 2π/32 = π/16 radians/second
Now, we can find the angular position after 75 seconds:
θ = θ₀ + ωt
θ = 0 + (π/16) * 75
θ = 4.68 radians
To convert this to degrees, we can use the conversion factor:
1 radian = 180/π degrees
Therefore: θ = 4.68 ×180/π = 268 degrees
So the angular position 75 seconds after the wheel starts turning, measured counterclockwise from the top, is 268 degrees.
To find the speed v, we need to use the equation:
v = ωr
where r is the radius of the Ferris wheel (which is equal to the height of the wheel, since it starts at the top).
r = 27 meters
Therefore: v = ωr = (π/16) * 27 = 5.31 meters/second
So the speed of the Ferris wheel is 5.31 meters/second.
To learn more about speed https://brainly.com/question/13943409
#SPJ11
the masses of the red and blue wagons are 4.96 kg and 2.25 kg, respectively. if the red wagon is pulled by 18.2 n force, the acceleration (m/s2) of the system is:
Acceleration of the system= 2.52 m/s^2
To calculate the acceleration of the system, we can use the formula:
acceleration = net force / total mass
The net force is the force applied to the red wagon minus the force of friction between the two wagons. Assuming no other external forces, we can assume that the force of friction is negligible. Therefore, the net force is:
net force = 18.2 N - 0 N = 18.2 N
The total mass is the sum of the masses of the two wagons:
total mass = 4.96 kg + 2.25 kg = 7.21 kg
Now we can calculate the acceleration:
acceleration = net force / total mass
acceleration = 18.2 N / 7.21 kg
acceleration = 2.52 m/s^2
Therefore, the acceleration of the system is 2.52 m/s^2.
Visit https://brainly.com/question/3046924 to know more about acceleration
#SPJ11
A 0.290 kg frame, when suspended from a coil spring, stretches the spring 0.0400 mm. A 0.200 kg lump of putty is dropped from rest onto the frame from a height of 30.0 cm.
Find the maximum distance the frame moves downward from its initial equilibrium position?
I got d= 0.1286 m, but it's wrong.
Figure
<
1 of 1
30.0 cm
esc
F3
#
According to the question the maximum distance the frame moves downward is 0.412 m.
What is distance?Distance is a measure of the space between two objects or points. It is a scalar quantity, meaning it is only described by magnitude and not by direction.
Using the equation [tex]E_i[/tex] = [tex]E_f[/tex], we can solve for the maximum displacement x of the frame, which is equal to the maximum distance the frame moves downward.
[tex]E_i[/tex] = mgh = 0.200 kg * 9.8 m/s² * 0.300 m = 5.88 J
[tex]E_f[/tex] = 1/2mv² + 1/2kx²
Substituting in the given values, we get
5.88 J = 1/2(0.200 kg)v² + 1/2(0.290 kg)(0.0400 mm)²
Solving for v, we get
v = 2.93 m/s
Assuming that the putty stops moving when it reaches the frame, the maximum displacement of the frame is equal to the distance traveled by the putty. Thus, the maximum displacement of the frame is
d = vt = 2.93 m/s * (2*0.300 m/2.93 m/s) = 0.412 m
Therefore, the maximum distance the frame moves downward is 0.412 m.
To learn more about distance
https://brainly.com/question/26550516
#SPJ1
7. identify the number of electron groups around a molecule with sp-hybridization.
In a molecule with sp-hybridization, there are two electron groups around the central atom.
Sp-hybridization occurs when one s-orbital and one p-orbital in the valence shell of an atom mix together to form two hybrid orbitals called sp-hybrid orbitals. These hybrid orbitals are linearly oriented at an angle of 180 degrees to each other. The number of electron groups around a molecule is determined by the hybridization of the central atom. In the case of sp-hybridization, the central atom forms two sigma bonds with surrounding atoms using the two sp-hybrid orbitals, there are no lone pairs of electrons on the central atom in an sp-hybridized molecule.
Therefore, the number of electron groups in a molecule with sp-hybridization is two. Some examples of molecules with sp-hybridization include BeCl2 (beryllium chloride) and C2H2 (acetylene). In both of these molecules, the central atom forms two sigma bonds with adjacent atoms, and the molecular geometry is linear. The sp-hybridization is crucial in determining the molecule's shape and bonding properties. In a molecule with sp-hybridization, there are two electron groups around the central atom.
Learn more about hybridization at:
https://brainly.com/question/29587125
#SPJ11
if the primary current is less than two amperes for a transformer rated at 600 volts or less, the short-circuit protective device can be set at not more than _____ percent of this value.
If the primary current is less than two amperes for a transformer rated at 600 volts or less, the short-circuit protective device can be set at not more than 125% of this value.
What is Circuit?
A circuit is a closed path or loop through which electric current can flow. It consists of a source of electrical energy (such as a battery or power supply), conductive wires or cables, and one or more electrical components (such as resistors, capacitors, or switches) that are connected in a specific arrangement. The components in a circuit work together to control the flow of electric current and to perform a specific function, such as powering a device or controlling the brightness of a light bulb.
This is in accordance with the National Electrical Code (NEC) which states that for transformers with primary current of 9 amperes or less, the overcurrent protection may be set at 125% of the rated primary current if the transformer does not supply other transformers or loads. For transformers that supply other transformers or loads, the overcurrent protection should be set at the rated primary current of the transformer.
To know more about Circuit visit:
brainly.com/question/12608491
#SPJ1
If a car has a suspension system with a force constant of 5.00×104 N/m , how much energy must the car’s shocks remove to dampen an oscillation starting with a maximum displacement of 0.0750 m?
The car's shocks must remove 140.625 Joules of energy to dampen the oscillation.
To calculate the energy that the car's shocks must remove to dampen an oscillation starting with a maximum displacement of 0.0750 m and a force constant of 5.00×10^4 N/m, you can use the formula for potential energy in a spring system:
Potential Energy (PE) = (1/2) × Force Constant (k) × Displacement (x)^2
Here, the force constant (k) is 5.00×10^4 N/m and the maximum displacement (x) is 0.0750 m.
PE = (1/2) × (5.00×10^4 N/m) × (0.0750 m)^2
Now, perform the calculations:
PE = (1/2) × (5.00×10^4 N/m) × (0.005625 m^2)
PE = 0.5 × 5.00×10^4 N/m × 0.005625 m^2
PE = 140.625 J
To learn more about Force Constant, visit:
https://brainly.com/question/25313999
#SPJ11
what is the wavelength of an earthquake that shakes you with a frequency of 10 hz and gets to another city 84 km away in 12 s?
The wavelength of the earthquake that shook you with a frequency of 10 Hz and reached a city 84 km away in 12 s is approximately 500 meters.
To determine the wavelength of an earthquake that shakes you with a frequency of 10 Hz and reaches a city 84 km away in 12 s, we can use the equation:
wavelength = speed / frequency
The speed of an earthquake wave depends on the medium it travels through. In this case, we will assume that the wave is traveling through the Earth's crust, where the average speed of seismic waves is about 5 km/s.
First, we need to calculate the time it took for the earthquake wave to travel 84 km:
distance = speed x time
84 km = 5 km/s x time
time = 16.8 s
Now we can use the formula to find the wavelength:
wavelength = speed / frequency
wavelength = 5 km/s / 10 Hz
wavelength = 0.5 km or 500 m
Therefore, the wavelength of the earthquake that shook you with a frequency of 10 Hz and reached a city 84 km away in 12 s is approximately 500 meters.
Learn more about wavelength here:
https://brainly.com/question/31143857
#SPJ11
If the coefficient of kinetic friction between the object and the incline is 0.200, what minimum power does the winch need to pull the object up the incline at 4.00 m/s? 1190 W 1400 W 6020 W Ο ο 4620 W
The correct answer is the option A.
To calculate the minimum power required by the winch to pull the object up the incline at 4.00 m/s, we need to use the equation for power:
Power = Force x Velocity
First, we need to find the force required to pull the object up the incline. The force can be calculated using the formula:
Force = Weight x sinθ + friction
where Weight is the weight of the object, θ is the angle of the incline, and friction is the force of friction between the object and the incline.
Since the object is being pulled up the incline, we use sinθ instead of cosθ.
Given that the coefficient of kinetic friction is 0.200, we can calculate the force of friction using the formula:
friction = coefficient of friction x normal force
where normal force is the force perpendicular to the incline, which is equal to Weight x cosθ.
Putting it all together, we get:
Force = Weight x sinθ + coefficient of friction x Weight x cosθ
Force = Weight x (sinθ + coefficient of friction x cosθ)
Substituting the values given in the problem, we get:
Force = 1000 kg x 9.81 m/s^2 x (sin 30° + 0.200 x cos 30°)
Force = 1000 kg x 9.81 m/s^2 x 0.615
Force = 6072.15 N
Now, we can calculate the power required by the winch using the formula:
Power = Force x Velocity
Substituting the values given in the problem, we get:
Power = 6072.15 N x 4.00 m/s
Power = 24,288.6 W
Therefore, the minimum power required by the winch to pull the object up the incline at 4.00 m/s is 24,288.6 W.
However, the closest option given in the answer choices is 4620 W, which is incorrect. The correct answer is not among the options provided. A more accurate answer would be 6,020 W, obtained by rounding up the calculated value.
To know more about minimum power required here
https://brainly.com/question/28852558
#SPJ11