If the coefficient of kinetic friction between a 26 kg crate and the floor is 0.34, the required horizontal force to move the crate at a steady speed is 86.6 Newton.
Steady speed means the acceleration is zero.
According to the Newton's first law of motion, to produce a motion with zero acceleration, the net force must be equal to zero.
In the problem, the forces are the horizontal force and the friction force.
Hence, the net force is:
∑F = 0
Fh - friction = 0
Fh - μ . mg = 0
Where:
Fh = horizaontal force
m = mass of the crate = 26 kg
g = acceleration due to gravity = 9.8 m/s²
μ = coefficient of kinetic friction = 0.34
Plug all the parameters into the equation,
Fh - 0.34 x 26 x 9.8 = 0
Fh = 86.6 N
Learn more about force here:
https://brainly.com/question/25534663
#SPJ4
Friction and air resistance are forces that always:
1.) Balance out, having no effect on the net force.
2.) Act in the opposite direction to an object's motion, tending to slow it down.
3.) Pull objects down towards the center of the Earth.
4.) Cause objects to speed up.
Two balls are rolling using the same force. Which law explains why the bowling ball will roll a shorter distance than a soccer ball ?
1. Newton's 1st law
2. Newton's 2nd law
3. Newton's 3rd law
Answer:
newton's 2nd law
Explanation:
In the first law, an object will not change its motion unless a force acts on it. In the second law, the force on an object is equal to its mass times its acceleration. In the third law, when two objects interact, they apply forces to each other of equal magnitude and opposite direction.
In the the table there is 20 kj of coal, how much energy in joules is 1g of coal?
Answer:
what do u meN by this i really don't know
Why is vehicle systems forensics useful today? Cars are less computerized than before More people own cars Devices like smartphones can interface with cars and leave evidence A large amount of DNA evidence is found in cars
Answer:
Devices like smartphones can interface with cars and leave evidence
Explanation:
Vehicle system forensic relates to digital data stored in a vehicles system.
Bluetooth connection times can be used to figure out at what time the owner was near his car. e.g. between a smart-watch and car infotainment system
Two moving objects have the same momentum. Object 1 has three times the mass of Object 2; therefore, Object 1 has:
the same the velocity of Object 2
three times the velocity of Object 2
nine times the velocity of Object 2
one-third the velocity of Object 2
one-ninth the velocity of Object 2
ANSWER
0ne third the velocity of object 2
Explanation:
P1=P2
m1v1=m2v2
v1=1/3.v2 [ since, m1=3.m2 ]
m2=m1/ 3
Answer:
one-third the velocity of Object 2
Explanation:
A plane moves at 15 km/h for a total distance of 300km. How long did it fly for? *
20 hours
0.05 hours
450,000 hours
2 hours
The image shows the magnetic field lines around a magnet.
Which statements are true for this magnet?
- the right pole is the south pole
- the left pole is the south pole
- the left pole is the north pole
- the right pole is the north pole
Choose all that apply
Answer:
The right pole is the south pole
The left pole is the north pole
Explanation:
Reason : -
Magnetic field lines emerge from North pole to South pole in a bar magnet.
Match the choices below to the correct description. Drag the terms on the left to the appropriate blanks on the right. ResetHelp blank − this body wave is a compressional wave. − this body wave is a compressional wave. blank − this body wave is a shear wave. − this body wave is a shear wave. blank − this surface wave moves from side to side. − this surface wave moves from side to side. blank − this surface wave moves up and down. − this surface wave moves up and down.
Answer: hello the terms are missing but I have provided the answer ( the terms and matched them properly
answer :
P WAVESS WAVESL WAVESR WAVESExplanation:
This body wave is a compressional wave : P WAVES
This body wave is a shear wave : S WAVES
This surface wave moves from side to side : L WAVES
This surface wave moves up and down. : R WAVES
A body wave is a type of wave that passes through the interior of the earth and they are classified as ; P and S waves while surface waves are seismic waves that travel near the earth's surface
What is the magnet field of a magnet
The acceleration due to gravity on the Moon's surface is known to be about one-sixth of the acceleration due to gravity on the Earth.
A rock falls under a gravitational force of 16.3 N on the moon.
Please help me figure out the mass of the rock.
Answer:
The mass of the rock is approximately 9.97 kg
Explanation:
From the question, we have;
The acceleration due to gravity on the Moon = (1/6) × The acceleration due to gravity on the Earth
The gravitational force under which a rock falls on the Moon = 16.3 N
The acceleration due to gravity on Earth, g ≈ 9.81 m/s²
Therefore, the acceleration due to gravity on the Moon, a = (1/6) × 9.81 m/s² ≈ 1.635 m/s²
The relationship between the force with which the rock falls and the acceleration of the motion resulting in the force is given by the following relationship;
F = m × a
Where;
F = The force = 16.3 N
m = The mass of the object acted on by the force = The mass of the rock
a = The acceleration of the motion of the object = 1.635 m/s²
From F = m × a, we have;
m = F/a
∴ m = 16.3 N/(1.635 m/s²) = 9.96941896 kg
The mass of the rock, m ≈ 9.97 kg.
If force 1 has a magnitude of 5 N (forward) and force 2 has a magnitude of 30 N (forward), what is the net force acting on the object?
A.) 25 N forward
B.) 35 N forward
C.) 25 N backwards
D.) 35 N backwards
Define the term kinetic frictional force
Answer:Kinetic friction is defined as a force that acts between moving surfaces. A body moving on the surface experiences a force in the opposite direction of its movement. The magnitude of the force will depend on the coefficient of kinetic friction between the two material.
Explanation:
Which force is most important inside an atom?
O A. Gravity
O B. Air resistance
O C. Friction
O D. Strong nuclear force
Answer:
D- fuerza nuclear fuerte
Explanation:
why is fluorine more chemically reactive than
nitrogen?
Answer:
Nitrogen has Electronic configuration 1s2 2s2 2p3. Fluorine has Electronic configuration 1s2 2s2 2p5 i.e. nitrogen has half filled p subshell that makes it more stable than fluorine and fluorine requires only 1 electron to complete it's octet to get stable..Therefore Fluorine is more reactive than Nitrogen.
Hope it helps you
A 2018 Tesla Model S has a horsepower of 518. How many watts of power does this car model have?
Answer:
It depends on the model but these are the watts of each motor
Explanation:
Un motor: 258 HP (262 CV) Dual motor: 154 kW (209 CV) y 197 kW (268 CV). Performance: 154 kW (209 CV) y 225 kW (306 CV).
PLEASE ANSWER THIS ASAP I WILL MARK YOU THE BRAINLIEST The actual subject is Science but they dont have that as a option in pick a subject
Answer:
Answer 4, 11k/min
Explanation:
From 0 - 1 km, it took 12 minutes
From 1 - 2 km, it took 10 minutes.
10 + 12 = 22
Divide the time by 2 km. 22/2 = 11
What is the momentum of a 200 kg truck travelling at 20 m/s?
Answer:
p = 4000 kg-m/s
Explanation:
Given that,
The mass of a truck, m = 200 kg
Speed of the truck, v = 20 m/s
We need to find the momentum of the truck. The formula for momentum is given by :
p = mv
so,
[tex]p=200\times 20\\\\p=4000\ kg-m/s[/tex]
So, the momentum of the truck is equal to 4000 kg-m/s.
p me have no brain please help I just wanna get through the year
According to the law of conservation of mass, what is the mass of sodium oxide (Na20) formed in this reaction? 4Na 91.96 g 02 32.00 g 2Na 0 ?
A. 247.92 grams
B. 123.96 grams
C. 61.68 grams
D. 495.84 grams
Answer:
B. 123.96 grams
Explanation:
a 200 L of water tank is filled from a reason the inlet pipe at the bottom electrical overflow pipe prices with colourful the bottom boats 50 50 cm in diameter how much does the water rise in the overflow pipe in the water is heated from 10 degrees Celsius to 40 degrees Celsius
Answer:
The water rises by 4.45 m
Explanation:
Mass is constant
Mass = Volume /Specific Volume
Mass = 200/(1*10^-3*1.001) = 199.8 Kg
Volume after heating = specific volume * mass
= 1.008 *10^-3 lt/gm * 199800 gm
= 201.398 t
Change in volume = 1.3986
(pi)r^2 *h = 1.3986 *10^-3 m^3
3.14 * (1*10^-2 m)^2 *h = 1.3986 *10^-3 m^3
H = 4.45 m
A force of 50N on a particle of mass 'm' the particles starts from rest and travels in a straight line through a distance of 25m in 5 seconds what is the mass of the object
Answer:
Explanation:1N=9,8kg
50*9,8=?
M=490KG
[N]s.i.=M
What type of energy is thermal energy? A. Sound energy B. Chemical energy C. Kinetic energy D. Nuclear energy
Answer:
kinetic energy
Explanation:
Name three (3) organelles that are found in plant cells that are not commonly found in animal cells?
Answer:
cell wall, chloroplasts, plastids
Which best summarizes a concept related to the work-energy theorem?
- When work is positive, the environment does work on an object.
- When work is negative, the environment does work on an object.
- When work is positive, the kinetic energy in a system remains constant.
- When work is negative, the kinetic energy in a system remains constant.
this is times pls help!
Answer:
When work is positive, the environment does work on an object.
Explanation:
According to the work-energy theorem, the net work done by the forces on a body or an object is equal to the change produced in the kinetic energy of the body or an object.
The concept that summarizes a concept related to the work-energy theorem is that ''When work is positive, the environment does work on an object.''
Answer:
Your answer is A!
Have a good day!
Can anybody help??????
Answer:
b
Explanation:
I think its b, a molecule
Calculate the refractive index for a substance where the angle of incidence is 300 , the angle of refraction is 600 , and the refractive index of second substance is 1.5
Answer:
η₁ = 2.6
Explanation:
Here, we will use snell's law to calculate the refractive of the substance:
[tex]\frac{\eta_2}{\eta_1} = \frac{Sin\theta_1}{Sin\theta_2}[/tex]
where,
η₁ = refractive index of first substance = ?
η₂ = refractive index of second substance = 1.5
θ₁ = angle of incidence = 30°
θ₂ = angle of refraction = 60°
Therefore,
[tex]\frac{1.5}{\eta_1} = \frac{Sin\ 30^0}{Sin\ 60^0}[/tex]
η₁ = 2.6
How do you find the velocity of a moving car?
Answer:
Velocity (v) is a vector quantity that measures displacement (or change in position, Δs) over the change in time (Δt), represented by the equation v = Δs/Δt. Speed (or rate, r) is a scalar quantity that measures the distance traveled (d) over the change in time (Δt), represented by the equation r = d/Δt.
Explanation:
hope this helps a little bit sorry if i got it wrong
I have always wondered if the saying it was hot enough to fry an egg on the sidewalk could 20 points be true. Please describe how you would determine if this could really happen. State any assumptions you would make. State any additional information that you would need and what you would do with the additional information
Answer:
This is one of the hottest summers America has ever seen and Jeremiah Warren is taking advantage of the heat wave and doing a little cooking…in his car!
It was about 98 or 99 degrees in Texas, so Jeremiah thought he’d head outside to see if it was hot enough to actually cook food. He buttered up a frying pan on his dashboard and filled it with an egg, cookie dough, a hot dog and bacon (mmm…bacon!). He set up another frying pan on the sidewalk and a few hours later he came back for a mid-day snack.
Explanation:
when a metal reacts with a non-metal it forms what???
Answer:
When metals react with non-metals, electrons are transferred from the metal atoms to the non-metal atoms, forming ions. The resulting compound is called an ionic compound.
:
How much force does it take to accelerate a 3.50 kg mass from 3.00 m/s to 17.0 m/s in a time of 2.00 seconds?
Answer:
Force = 24.5 Newton
Explanation:
Given the following data;
Mass = 3.50 kg
Initial velocity, u = 3 m/s
Final velocity, v = 17 m/s
Time, t = 2 seconds
To find the force;
First of all, we would determine the acceleration of the object using the formula;
Acceleration = (v - u)/t
Acceleration = (17 - 3)/2
Acceleration = 14/2
Acceleration = 7 m/s²
Now, we can find the force using the formula;
Force = mass * acceleration
Force = 3.5 * 7
Force = 24.5 Newton
Question:
Define work.
Answer:
Work, in physics, refers to the measure of energy transfer that occurs when an object is moved over a distance by an external force at least part of which is applied in the direction of the displacement.
Hey there!
Work is defined as the the force which gets applied to an object in order to displace (move) it. For example, you work in order to walk up & down the stairs. For this, you need to apply force as well. So, work done = force × distance.
Hope it helps!