Answer:
The glass rod remains charged due to electrification by the silk
A ceramic tile measuring 50 cm x50cm has been designed to bear a pressure of 40 N/in . Will it with stand a force of 5 N?
Answer:
Yes the tile can withstand a force 5 N
Explanation:
We'll begin by converting the dimensions from cm to in. This can be obtained as follow:
Dimension = 50 cm x 50cm
Recall
2.54 cm = 1 in
Therefore,
50 cm = 50 cm × 1 in / 2.54 cm
50 cm = 19.685 in
Thus, the dimension becomes:
Dimension = 19.685 in × 19.685 in
Next, we shall determine the area. This can be obtained as follow:
Dimension = 19.685 in × 19.685 in
Area = 19.685 in × 19.685 in
Area = 387.5 in²
Next, we shall determine the force to which the tile can withstand. This can be obtained as follow:
Pressure (P) = 40 N/in²
Area (A) = 387.5 in²
Force (F) =?
P = F/A
40 = F/387.5
Cross multiply
F = 40 × 387.5
F = 15500 N
Thus, the tile can withstand a force up to 15500 N.
Therefore, the answer to the question is:
Yes the tile can withstand a force 5 N
If a person pulls back a rubber band on a slingshot without letting to go of it, what type of energy will the rubber band have? A. Potential energy B. Rotational energy C. Kinetic energy D. Translational energy
Answer:
Potential energy. Releasing it, the potential energy would convert into motion, kinetic energy.
Potential energy is when an object has some sort of potential eg. for motion such as in this example.
Answer:
A. Potential energy
Explanation:
Potential energy can be thought of as stored energy, which has the potential of becoming kinetic energy once it has been released.
Equal masses of two different liquids are put into identical beakers.
Liquid 1 is heated for 100s and liquid 2 is heated for 200s by heaters of the same power.
The temperature of both liquids increases by the same amount.
Which statement is correct?
A Both liquids receive the same amount of energy.
B. Liquid 1 receives more energy than liquid 2.
C. Both liquids have equal thermal capacity.
D. The thermal capacity of liquid 1 is less than the thermal capacity of liquid 2.
Answer:
C
Explanation:
Because they both received the same temperature
Newton's law of cooling states that the rate of change of temperature of an object in a surrounding medium is proportional to the difference of the temperature of the medium and the temperature of the object. Suppose a metal bar, initially at temperature 50 degrees Celsius, is placed in a room which is held at the constant temperature of 40 degrees Celsius. One minute later the bar has cooled to 40.18316 degrees . Write the differential equation that models the temperature in the bar (in degrees Celsius) as a function of time (in minutes). Hint: You will need to find the constant of proportionality. Start by calling the constant k and solving the initial value problem to obtain the temperature as a function of k and t . Then use the observed temperature after one minute to solve for k .
Answer:
Newton's law of cooling says that the temperature of a body changes at a rate proportional to the difference between its temperature and that of the surrounding medium (the ambient temperature); dT/dt = -K(T - Tₐ) where T = the temperature of the body (°C), t = time (min), k = the proportionality constant (per minute),
Explanation:
what is newtons 2nd law
According to the Newton's second law :- The acceleration of an object is directly related to the net force and inversely related to its mass. Acceleration of an object depends on two things, force and mass.
Which of the following accurately describes circuits
Answer:
In a series circuits, the current can flow through only one path from start to finish - accurately describes circuits.
Answer:
It is a series circuit, the current can flow through only one path from start to finish - accurately describes circuits.
Explanation:
I don't know the option but it is also the correct one.
Trong máy phát điện xoay chiều ba pha khi tổng điện áp tức thời của cuộn 1,2 là e1+e2=120V thì điện áp tức thời của cuộn 3 là
Answer:
I just noticd i dont speak this launguage
Explanation:
Jacie made a model to show the water cycle. The model she made is shown
below.
Which process in the model represents condensation?
A. As water vapor transfers heat to ice cubes, it forms clear droplets outside the
plastic wrap.
B. As water vapor gains heat from ice cubes, it forms clear droplets outside the
plastic wrap.
C. As water vapor transfers heat to ice cubes, it forms colored droplets inside the
plastic wrap.
D. As water vapor gains heat from ice cubes, it forms colored droplets inside the
plastic wrap
Answer:
option C
Explanation:
as water vapor transfer heat, colored drops are seen inside the wrap.
What are 3 artificial and 2 natural sources of electromagnetic radiation?
Answer: its b bro
Explanation:
ajafa'jfbA'FJ
Suppose a boy is pulling a 10 kg wagon at a speed of 1m/s what is the kinetic energy?
Explanation:
Answer:At any instant, the object's kinetic energy is (5) x (its speed in meters per second)2 .
A body is dropped from a height H. In how much time will it reach the ground?
Answer:
[tex]s = ut + \frac{1}{2} g {t}^{2} \\ t(u + \frac{1}{2} gt) = H \\ u + \frac{1}{2} gt = H \\ t = 2(H - u) \div g \\ t = \frac{(H - u)}{5} \\ u \: is \: speed \: or \: velocity[/tex]
A 56 kg pole vaulter falls from rest from a height of 5.1 m onto a foam rubber pad. The pole vaulter comes to rest 0.29 s after landing on the pad.
Required:
a. Calculate the athlete's velocity just before reaching the pad
b. Calculate the constant force exerted on the pole vaulter due to the collision
a. The athlete's velocity just before reaching the pad is [tex]35.21m/s[/tex]
b. The constant force exerted on the pole vaulter is 6799.52 N
a. We use Newton's equation of motion,
[tex]v=u+at\\\\S=ut+\frac{1}{2}at^{2}[/tex]
Where u is initial velocity, v is final velocity, a is acceleration , t is time and S represent distance.
Given that, s = 5.1 m , t = 0.29s, u = 0
Substitute in above equation.
[tex]5.1=\frac{1}{2}*a*(0.29)^{2} \\\\a=\frac{5.1*2}{0.084}=121.42m/s^{2}[/tex]
the athlete's velocity, [tex]v=0+121.42*(0.29)=35.21m/s[/tex]
b. The constant force exerted on the pole vaulter due to the collision is given as, [tex]Force=mass*acceleration[/tex]
[tex]Force=56*121.42=6799.52N[/tex]
Learn more:
https://brainly.com/question/13532462
Erica (37 kg ) and Danny (45 kg ) are bouncing on a trampoline. Just as Erica reaches the high point of her bounce, Danny is moving upward past her at 4.7 m/s . At that instant he grabs hold of her. What is their speed just after he grabs her?
Answer:
V = 2.58 m/s
Explanation:
Below is the calculation:
Given the weight of Erica = 37 kg
The weight of Danny = 45 kg
Danny's speed to move upward = 4.7 m/s
Use below formula to find the answer.
m1 * u1 = (m1+m2) * V
V = m1*u1 / (m1+m2)
Here, m1 = 45
u1 = 4.7
m1 = 45
m2 = 37
Now plug the values in formula:
V = m1*u1 / (m1+m2)
V = (45*4.7)/(45+37)
V = 2.58 m/s
You send a traveling wave along a particular string by oscillating one end. If you increase the frequency of oscillations, does the speed of the wave increase, decrease, or remain the same?
Answer:
The speed of the wave remains the same
Explanation:
Since the speed of the wave v = √(T/μ) where T is the tension in the string and μ is the linear density of the string.
We observed that the speed, v is independent of the frequency of the wave in the string. So, increasing the frequency of the wave has no effect on the speed of the wave in the string, since the speed of the wave in the string is only dependent on the properties of the string.
So, If you increase the frequency of oscillations, the speed of the wave remains the same.
Is the following chemical reaction balanced?
2H202-H2O + O2
yes
no
PLEASE HELP!! URGENTT!
Answer:
120 Newton
Explanation:
Given the following data;
Mass = 12 kg
Angle = 4°
We know that acceleration due to gravity is equal to 10 m/s
To find the minimum force to stop the block from sliding;
Force = mgCos(d)
Where;
m is the mass of an object.
g is the acceleration due to gravity.
d is the angle of inclination (theta).
Substituting into the formula we have;
F = 12*10*Cos(4°)
F = 120 * 0.9976
F = 119.71 ≈ 120 Newton
Using pascals principle, F1/A1=F2/A2, solve this like a proportion.
A force of 50 N is applied to an area of 200 sq feet, how much force will be applied of the area to be covered is 50 sq feet?
Answer:
NO CLUE
Explanation:
GOOD LUCK THOUGH
A truck collides with a car on horizontal ground. At one moment during the collision, the magnitude of the acceleration of the truck is 12.7 m/s^2. The mass of the truck is 2490 kg and the mass of the car is 890 kg. Assume that the only horizontal forces on the vehicles during the collision are the forces they exert on one another.
Required:
What is the acceleration of the car at the same moment?
Answer:
The magnitude of the acceleration of the car is 35.53 m/s²
Explanation:
Given;
acceleration of the truck, [tex]a_t[/tex] = 12.7 m/s²
mass of the truck, [tex]m_t[/tex] = 2490 kg
mass of the car, [tex]m_c[/tex] = 890 kg
let the acceleration of the car at the moment they collided = [tex]a_c[/tex]
Apply Newton's third law of motion;
Magnitude of force exerted by the truck = Magnitude of force exerted by the car.
The force exerted by the car occurs in the opposite direction.
[tex]F_c = -F_t\\\\m_ca_c = -m_t a_t\\\\a_c =- \frac{m_ta_t}{m_c} \\\\a_c = -\frac{2490 \times 12.7}{890} \\\\a_c = - 35.53 \ m/s^2[/tex]
Therefore, the magnitude of the acceleration of the car is 35.53 m/s²
Answer:
The magnitude of the acceleration of the car is 35.53 m/s²
Explanation:
Given;
acceleration of the truck, = 12.7 m/s²
mass of the truck, = 2490 kg
mass of the car, = 890 kg
let the acceleration of the car at the moment they collided =
Apply Newton's third law of motion;
Magnitude of force exerted by the truck = Magnitude of force exerted by the car.
The force exerted by the car occurs in the opposite direction.
Therefore, the magnitude of the acceleration of the car is 35.53 m/s²
sometimes balance point may not be obtained on the potentiometer wire why
what are the symptoms of hepatitis 'b'
2. The given graph shows that the object is
(a) in non-uniform motion
(b) in uniform motion
(c) at rest
(d) in an oscillatory motion.
distance
time
Answer:
(c) at rest
Explanation:
Given
See attachment for the distance time graph
Required
What does the graph illustrate?
From the graph, we can see that the line of distance is a horizontal line.
This suggests that a time increases, the distance remains unchanged
When distance remains unchanged over time, then it means the object is at rest.
Hence, (c) is correct
The greatest force in momentum will be produced by
Please need in hurry
Explanation:
i) center of gravity (or mass)
ii) m = W/g = (160 N)/(9.8 m/s^2)
= 16.3 kg
if a 230V television takes a current of 3A. calculate it's power
Answer:
Formula
P = I x V
Information
V = 230
A = 3
P = x
Calculation
x = 230 x 3
x = 690 W
Explanation:
hope it is helpful for you
mark me brainlist
Define Standard Unit
answer:
standard units are the units we usually use to measure the weight, length or capacity of objects.
explanation:
international system of units or SI units are standard units these units used for measuring quantities are accepted worldwide for example: kilogram is standard unit for mass, second is standard unit for measuring timeThe launching catapult of the aircraft carrier gives the jet fighter a constant acceleration of 59 m/s2 from rest relative to the flight deck and launches the aircraft in a distance of 97 m measured along the angled takeoff ramp. If the carrier is moving at a steady 26 knots (1 knot = 1.852 km/h), determine the magnitude v of the actual velocity of the fighter when it is launched.
Answer:
Explanation:
We shall find the final velocity of aircraft with respect to aircraft carrier using the following relation.
v² = u² + 2as
v² = 0² + 2 x 59 x 97
v² = 11446
v = 107 m /s
velocity of aircraft carrier = 1.852 x 26 = 48.152 km/h
= 48.152 x 1000 / (60 x 60) m/s
= 13.37 m /s
This velocity of aircraft carrier will be added to the velocity of aircraft .
So absolute velocity of aircraft = 107 m /s + 13.37 m/s
= 120.37 m/s
make a list of five agriculture based occupation
Answer:
Agricultural Engineer.
Agricultural Food Scientist.
Agricultural Inspector.
Agricultural Manager.
Agricultural Specialist.
They are;
Agricultural EngineerAgricultural specialistFarm ManagerAgricultural economistCommercial mixed farmingThank you hope it helps you. May god bless you❤A toy car of mass 600g moves through 6m in 2 seconds. The average kinetic energy of the toy car is
Answer:
12
Explanation:
I'm a beginner so am not sureeeeee
PLEASE HELP MEE THIS IS DUE IN 45 MINS
Answer:
The distance travelled does not depend on the mass of the vehicle. Therefore, [tex]s = d[/tex]
Explanation:
This deceleration situation can be analyzed by means of Work-Energy Theorem, where change in translational kinetic energy is equal to the work done by friction:
[tex]\frac{1}{2}\cdot m\cdot v^{2}-\mu\cdot m\cdot g \cdot s = 0[/tex] (1)
Where:
[tex]m[/tex] - Mass of the car, in kilogram.
[tex]v[/tex] - Initial velocity, in meters per second.
[tex]\mu[/tex] - Coefficient of friction, no unit.
[tex]s[/tex] - Travelled distance, in meters.
Then we derive an expression for the distance travelled by the vehicle:
[tex]\frac{1}{2}\cdot v^{2} = \mu \cdot g \cdot s[/tex]
[tex]s = \frac{v^{2}}{\mu\cdot g}[/tex]
As we notice, the distance travelled does not depend on the mass of the vehicle. Therefore, [tex]s = d[/tex]
A teacher performs a demonstration to show the properties of an unknown substance. The teacher cuts off a piece of gray shiny substance and drops it in water. The substance floats and reacts violently with the water. Based on this Information, what type of element the unknown substance?
A. metalloid
B. metal
C. nonmental
D. halogen
Answer:
nonmental
Explanation:
Option B is correct. The substance floats and reacts violently with the water. Based on this Information, metal is the unknown substance.
What is metal?A metal, a glossy substance that transmits electricity and heat reasonably efficiently when newly manufactured, polished, or broken.
Metals are either malleable or ductile. Metals can be chemical elements like iron.
Metal is substance floats and reacts violently with the water. When particles collide, energy is transferred. A change in temperature can be used to identify this.
The substance floats and reacts violently with the water. Based on this Information, metal is the unknown substance.
Hence, option B is correct.
To learn more about metal, refer to the link;
https://brainly.com/question/18153051
#SPJ2