Answer:
63360 mi/h
Explanation:
How to find the speed of an object
Calculate speed, distance, or time using the formula d = st, distance equals speed times time. The Speed Distance Time Calculator can solve for the unknown SDT value given two known values.
Time can be entered or solved for in units of second S (s), minutes (min), hours (hr), or hours and minutes and seconds (hh:mm: ss). See shortcuts for time formats below.
To solve for distance use the formula for distance D = st, or distance equals speed times time.
distance = speed x time
Rate and speed are similar since they both represent some distance per unit time like miles per hour or kilometers per hour. If rate r is the same as speed s, r = s = d/t. You can use the equivalent formula d = rt which means distance equals rate times time.
distance = rate x time
To solve for speed or rate use the formula for speed, s = d/t which means speed equals distance divided by time.
speed = distance/time
To solve for time use the formula for time, t = d/s which means time equals distance divided by speed.
time = distance/speed
Therefore, the speed = 63360 miles per hour
= 63360 mi/h
Green light (520 nm) enters glass with n = 1.52. What is the wavelength of light that enters the glass?
Answer:
answer=1.97×10^8
Explanation:
will u mark me brainliest?
Green light (520 nm) enters glass with n = 1.52, the wavelength of light that enters the glass is 520 nm.
To find the wavelength of light that enters the glass, we can use Snell's Law, which relates the angles and indices of refraction for light passing through a boundary between two mediums:
n₁ × sin(θ₁) = n₂ × sin(θ₂)
In this scenario, we can assume that the angle of incidence is zero degrees (the light is entering the glass perpendicular to the surface). Therefore, sin(θ₁) becomes sin(0) which is 0.
Using Snell's Law, we have:
n₁ × sin(θ₁) = n₂ × sin(θ₂)
1 × 0 = 1.52 × sin(θ₂)
The wavelength of light that enters the glass remains the same as the initial wavelength in air, which is 520 nm (nanometers).
Thus, the wavelength of light that enters the glass is 520 nm.
For more details regarding wavelength, visit:
https://brainly.com/question/31143857
#SPJ5
How would the motion of the book change if there was MORE friction as it moved across the table?
Answer:
The force of friction opposes the motion of an object, causing moving objects to lose energy and slow down.
Explanation:
list and describe the units of power
Answer:
On the other hand, power is a scalar quantity and is basically the amount of energy consumed per unit time which has no direction.
Horsepower HP 746 watts
Kilowatts kW 1×103W
Megawatts MW 1×106W
Gigawatts GW 1×109W
The S.I unit of power is Watt(W) which is joule per second.
to transmit heat sound or electricity through a medium
Answer:Electrical conduction is the transfer of electrically charged particles through a medium, such as electricity traveling through the power lines in your house. Sound conduction (or acoustic conduction) is the transfer of sound waves through a medium, such as vibrations from loud music passing through a wall.
Explanation: Trust
How does a mass drive work
Answer:
A mass driver or electro magnetic catapult is a proposed method of non-rocket space launch which would use a linear motor to accelerate and catapult payloads up to high speeds. All existing and contemplated mass drivers use coils of wire energized by electricity to make electromagnets.
Explanation:
may i be marked brainliest?
one end of a horizontal spring(k=80N/m)is held fixed while an external force is applied to the free end,stretching it slowly from×1=o to ×2=4cm.what is work done by the applied force on the spring
Answer:
6.4 Joules
Explanation:
For springs, Hooke's law states that;
F = ke
where F is a force applied, e is the extension and k is the spring constant.
Work done in a spring is the same as the potential energy stored in the spring. So that;
Work done = [tex]\frac{1}{2}[/tex] k[tex]e^{2}[/tex]
e = [tex]x_{2}[/tex] - [tex]x_{1}[/tex]
[tex]x_{2}[/tex] = 4 cm = 0.4 m
[tex]x_{1}[/tex] = 0
So that,
[tex]x_{2}[/tex] - [tex]x_{1}[/tex] = 0.4 m
Thus,
Work done = [tex]\frac{1}{2}[/tex] x 80 x [tex](0.4)^{2}[/tex]
= 40 x 0.16
= 6.4
Work done = 6.4 J
The work done by the force on the spring is 6.4 Joules.
which statement identifies a reason to preserves wetlands
Answer:
They store floodwater
Explanation:
When an electron is removed from a neutral atom, it becomes....
A) A positive ion
B) a negative ion
C) heavier
D) a bipolar atom
Answer:
A
Explanation:
given a force of 100 N and a acceleration of 5 m/s, what is the mass
Answer:
[tex]force = mass \times acceleration \\ 100 = m \times 5 \\ m = \frac{100}{5} \\ m = 20 \: kg[/tex]
How can you make two objects with different masses move the same distance
Answer:
apply more energy to the object with more mass
Explanation:
PWEESE HELPPPP I'LL GIVE BRAINLIEST, (NO LINKS OR I'LL REPORT)
（︶^︶）
A sound wave is made of a series of compressions and
a.
extensions.
c.
rarefactions.
b.
volumes.
d.
refractions.
Answer:
extensions.
Explanation:
Hope this helps
Answer:
extensions i think because sound waves travel through the air and to our ears so its extended
Explanation:
what is Laminar flow??
Answer:
Explanation:
Laminar Flow is a very important topic discussed in physics in the subject of fluid dynamics. Basically, it explains how fluid particles behave at lower velocities. In such cases and when the viscosity of the fluid is low, the fluid particles flow smoothly in perfectly perpendicular layers that do not collide or cross each other. Unlike turbulent flow, which is the opposite. An example of Laminar flow can be seen when you open up a water hose with little pressure, the water simply flows out of the hose and looks very clear and smooth.
A laser pulse of duration 25 ms has a total energy of 1.4 J. The wavelength of this radiation is
567 nm. How many photons are emitted in one pulse? Let 1 eV = 1.60 x 10-19 J, the mass of
an electron m=9.11 10-31
kg, the speed of light c= 3.00 x 108 m/s, and Planck's constant h
= 4.136 10-15 eV .s.
Answer:
n = 4 x 10¹⁸ photons
Explanation:
First, we will calculate the energy of one photon in the radiation:
[tex]E = \frac{hc}{\lambda}\\\\[/tex]
where,
E = Energy of one photon = ?
h = Plank's Constant = 6.625 x 10⁻³⁴ J.s
c = speed of light = 3 x 10⁸ m/s
λ = wavelength of radiation = 567 nm = 5.67 x 10⁻⁷ m
Therefore,
[tex]E = \frac{(6.625\ x\ 10^{-34}\ J.s)(3\ x\ 10^8\ m/s)}{5.67\ x\ 10^{-7}\ m}[/tex]
E = 3.505 x 10⁻¹⁹ J
Now, the number of photons to make up the total energy can be calculated as follows:
[tex]Total\ Energy = nE\\1.4\ J = n(3.505\ x\ 10^{-19}\ J)\\n = \frac{1.4\ J}{3.505\ x\ 10^{-19}\ J}\\[/tex]
n = 4 x 10¹⁸ photons
If someone replenishes the tree population in a forest ecosystem, how
might this affect the producers already living there?*
a: Increase in competitionfor biotic factors
b:decrease in competition for abiotic factors
c:increase in competition for abiotic factors
d: decrease in competition for biotic factors
Answer:
it would be c, an increase in competition for abiotic factors because if more trees are to be planted, less sunlight would seep through the leaves, leaving the producers to gain the abiotic factors to do with sunlight, temperature, and water
I hope this helps!!
have a wonderful day!
-millie :D
Consider these scenarios. A pink box with containing the words Scenario 2 You are about 7 meters away from a metal bar that is struck with a drumstick. The sounds travels through the air to your ear. In which of these scenarios would the sound of the drumstick hitting the metal bar get to you in the least amount of time? Explain your answer.
Answer:
Scenario 1 will cause the sound of the drumstick hitting the metal bar to reach your ears in the least amount of time.
Explanation:
The sound wave will travel faster in the metal bar than through the air because the speed of sound waves in solids is faster than it is in gases.
Answer:
Scenario 1 will cause the sound of the drumstick hitting the metal bar to reach your ears in the least amount of time.
Explanation:
ifunny is dankreloaded
Which option is an example of a pure substance?
A. The compound strontium oxide
B. Carbon atoms spread evenly throughout iron atoms
C. A vinegar and oil salad dressing
D. A disc of silicon with stones of germanium in it
please help me on my physics hw
Answer:
1. 11 A
2. 240 V
3. 8 Ω
4. 60 C
5. 14400 C
Explanation:
1. Determination of the current.
Voltage (V) = 110 V
Resistance (R) = 10 Ω
Current (I) =?
V = IR
110 = I × 10
Divide both side by 10
I = 110 / 10
I = 11 A
2. Determination of the voltage
Current (I) = 3 A
Resistance (R) = 80 Ω
Voltage (V) =?
V = IR
V = 3 × 80
V = 240 V
3. Determination of the resistance.
Current (I) = 0.5 A
Voltage (V) = 4 V
Resistance (R) =?
V = IR
4 = 0.5 × R
Divide both side by 0.5
R = 4 / 0.5
R = 8 Ω
4. Determination of the charge
Current (I) = 2 A
Time (t) = 30 s
Charge (Q) =?
Q = it
Q = 2 × 30
Q = 60 C
5. Determination of the charge.
We'll begin by converting 20 mins to seconds. This can be obtained as follow:
1 min = 60 s
Therefore,
20 mins = 20 × 60
20 mins = 1200 s
Finally, we shall determine the charge as follow:
Current (I) = 12 A
Time (t) = 1200 s
Charge (Q) =?
Q = it
Q = 12 × 1200
Q = 14400 C
3.Three resistors of 25.0Ω, 30.0Ω, and 40.0Ω are in a series circuit with a 6.0-volt battery. What is the current in the circuit?
please answer by steps
Answer:
Current = 0.063 Amperes
Explanation:
Let the three resistors be R1, R2, and R3 respectively.
Given the following data;
R1 = 25.0Ω,
R2 = 30.0Ω
R3 = 40.0Ω
Voltage = 6 Volts
First of all, we would determine the equivalent or total resistance;
Total resistance (in series) = R1 + R2 + R3
Total resistance = 25.0Ω + 30.0Ω + 40.0Ω
Total resistance = 95 Ω
Next, we find the current flowing through the circuit;
Voltage = current * resistance
Substituting into the formula, we have;
6 = current * 95
Current = 6/95
Current = 0.063 Amperes
Which wave must have a medium to travel?
A) light wave
B)compression wave
C) electromagnetic wave
D) ultraviolet wave
Explanation:
light waves because the categorised under mechanical waves
at what point does the skater have the least amount of KE kinetic energy?
Answer:
I think it's D
Explanation:
because kinetic basically means moving and potential mean sitting still so ig it's c or D
Blown balloon kept outside on a sunny day bursts what will happen to the ballon
When the balloon is kept in the sun, due to Sun's heat, the kinetic energy of gaseous particles inside the balloons also gets increased and the balloon expands. This will increase the pressure on the walls of the balloon. It continues to expand and comes to a stage when the baloon bursts.
Write any two uses of simple machines.
Explain how seafloor spreading is like a conveyor belt
Answer:
In sea-floor spreading, the sea floor spreads apart along both sides of a mid-ocean ridge as new crst is added. As a result, the ocean floors move like conveyor belts, carrying the continents along with them.
Explanation:
in the experiment it is important to make measurements that are both precise and accurate
which of these measurements of time is the most precise
5.1 second s
5.14 second s
5 second s.
A spring gun with a spring constant of 250N/m is compressed 5.0cm. How fast will a 0.025kg dart move when it leaves the gun?
Answer:
1.5 m/s
Explanation:
The dart moves when it leaves the spring gun with a velocity of 22.4 m/s.
What is Potential energy?Potential energy is defined as the stored energy that depends on the relative position of different parts of a system such as springs have more potential energy when it will be compressed or stretched.
For velocity calculation of the dart when it leaves the spring gun, using the formula for potential energy stored in a spring:
[tex]PE = (1/2)kx^2[/tex]
where,
k is the spring constant
x is the compression of the spring.
Since the spring is compressed by 5 cm, the potential energy stored in it is:
[tex]PE = (1/2)(250 N/m)(0.05 m)^2[/tex]
PE = 6.25 J
The potential energy stored in the spring will be transferred to the dart when it is released which can be calculated from the velocity of the dart using the equation of conservation of energy:
[tex]PE = (1/2)mv^2[/tex]
where,
m is the mass of the dart
v is its velocity.
Solving for v:
v = sqrt(2PE/m)
=> sqrt(2(6.25 J)/(0.025 kg))
=> 22.4 m/s.
Thus, the dart moves when it leaves the spring gun with a velocity of 22.4 m/s.
Learn more about Velocity, here:
brainly.com/question/25287332
#SPJ2
Una caja con medicina es lanzada desde un avión localizado a una distancia vertical de 340 m por encima de un río. Si el avión lleva una velocidad horizontal de 70 m/s¿Qué distancia horizontal recorrerá la caja con medicina antes de caer al río?
Answer:
La distancia horizontal que recorrerá la caja con medicina antes de caer al río es 583.1 metros.
Explanation:
Una caja con medicina es lanzada desde un avión localizado a una distancia vertical de 340 m por encima de un río. Este movimiento posee una composición en dos dimensiones: uno horizontal sin aceleración, y el otro vertical con aceleración constante debido a la gravedad. Por lo que se trata de un movimiento rectilíneo uniforme (MRU) en su trayectoria horizontal o eje horizontal (es decir, su velocidad es constante) y un movimiento uniformemente variado (MRUV) en su trayectoria vertical o en el eje vertical (es decir, su aceleración es constante).
En este caso, son conocidos los datos, considerando el sistema de referencia de la imagen:
Vy = 0 m/s (trayectoria vertical) Vx = 70m/s (velocidad horizontal) hi = 340 m (altura inicial) g = -9,8 m/s² hf = 0 m (altura final. Cuando la caja de medicina cae al río, su altura será 0 m)En el caso del MRUV, la posición puede calcularse mediante la expresión:
Posición final= Posición inicial + Velocidad inicial*t + [tex]\frac{1}{2}[/tex]*a*t²
donde a es la aceleración y t el tiempo transcurrido.
En este caso, reemplazando los datos conocidos, teniendo en cuenta que el MRUV sucede en la trayectoria vertical y que la aceleración es el valor de la gravedad:
0 m= 340 m + 0 m/s*t + [tex]\frac{1}{2}[/tex]* (-9.8 m/s²)* t²
Resolviendo:
-340 m= [tex]\frac{1}{2}[/tex]* (-9.8 m/s²)* t²
[tex]\frac{-340 m}{\frac{1}{2} *(9.8\frac{m}{s^{2} } )} =t^{2}[/tex]
69.39 s²= t²
t= √69.39 s²
t= 8.33 s
La posición en MRU se obtiene mediante:
Posición final= Posición inicial + velocidad* tiempo
Con los datos conocidos y el tiempo calculado previamente, es posible calcular la distancia horizontal que recorrerá la caja con medicina antes de caer al río, siendo la posición inicial en x igual a cero:
Posición final= 0 m + 70m/s* 8.33 s
Posición final= 583.1 m
La distancia horizontal que recorrerá la caja con medicina antes de caer al río es 583.1 metros.
Veremos que la distancia horizontal que recorre la caja es 583.1 metros.
¿Como encontrar la distanca horizontal recorrida?Recordar que la velocidad vertical y horizontal son independientes.
Aqui, lo primero que debemos hacer es encontrar el tiempo que la caja tarda en llegar al suelo.
Para ello usamos la ecuación de movimiento vertical:
p(t) = (-4.9 m/s^2)*t^2 + v*t + h
Donde el primer termino representa la gravedad, el segundo la velocidad inicial (que es cero en este caso) y el tercero la altura inicial, que es 340m.
p(t) = (-4.9 m/s^2)*t^2 + 340m
La caja llegara al suelo cuando la función de arriba sea igual a cero:
(-4.9 m/s^2)*t^2 + 340m = 0
t = √(340m/(4.9 m/s^2)) = 8.33 s
Es decir, la caja tarda 8.33 segundos en llegar al suelo.
Esto significa que la caja se va a mover horizontalmente durante 8.33 segundos con una velocidad de 70m/s (la que tenía el avion). Es decir, la distancia horizontal que se mueve la caja es :
D = 8.33s*(70m/s) = 583.1 m
Sí quieres aprender más sobre ecuaciones de movimiento, puedes leer:
https://brainly.com/question/25316464
Qs 5 pleaseeee help!!!
Answer:
Ok, first is important that you understand how the heat radiation works.
All the objects that have some heat energy in them, radiate some of that energy in the form of electromagnetic waves.
Particularly, the Sun radiates a lot of energy (at the point that if you step under the sunlight, you can feel on your skin the heat that comes from the sun, this is due to radiation).
Now, suppose that you have a thin coat of water over you, then the material that gets impacted by that radiation will be the water and not you, and then the energy is dissipated (some of the energy goes to your body and some go to the air)
This is one way in which spraying water over themselves helps the elephants to keep them cool.
Another way in which heat can be transferred is by conduction.
When you have a hot object and a cool object, and you put them together (so the objects touch each other), the heat will flow from the hotter object to the cooler object until both objects have the same temperature.
Then if the elephant body temperature is larger than the temperature of the water that the elephant sprays over his body, when the water touches the body some of the heat in the elephant body will be transferred to the coat of water, and in this way, the temperature of the elephant's body decreases.
These are the two ways we wanted to find.
An object is in motion if ___
Answer:
An object is in notion if its position change with time.
particles q1, q2, and q3 are in a straight line. particles q1 = -5.00 x 10^-6 C, q2 = -5.00 x 10^-6 C. .5 between each what is the net force on q3
Answer:
1.12
Explanation:
Acellus
Answer: +1.12
Explanation:
This answer works for Acellus! :)
It took 3.5 hours for a train to travel the distance between two cities at a velocity of 120 km/h. How far did the train travel between the two cities?
Answer: 420 km
Explanation:
120 per hour, 3.5 hours
120 x 3.5 = 420