If 55 yards of dirt costs $825.00 what is the constant of proportionality?

Answer:

it is wrong

Step-by-step explanation:

the reason it is wrong is because I said so

Answer:

I am going to say no BECAUSE there are two y values, on the same point. For it to be linear it should only have one point per value. I think... good luck.

The profit function if the cost and revenue is given  P(x) = -0.01x² + 3.2x - 150.

To find the profit function P(x), we subtract the cost function C(x) from the revenue function R(x). This gives us the expression for P(x) as P(x) = R(x) - C(x).

The profit function P(x) represents the difference between the revenue R(x) and the cost C(x). To find P(x), we subtract C(x) from R(x):

P(x) = R(x) - C(x)

Substituting the given expressions for R(x) and C(x), we have:

P(x) = (9x - 0.01x²) - (150 + 5.8x)

Simplifying this expression, we get:

P(x) = 9x - 0.01x² - 150 - 5.8x

Combining like terms, we have:

P(x) = -0.01x² + 3.2x - 150

Thus, the profit function is given by P(x) = -0.01x² + 3.2x - 150. This function represents the profit made as a function of the quantity of goods sold, x. It allows us to analyze the relationship between revenue, cost, and profit for different values of x.

Learn more about profit function  here:

https://brainly.com/question/18270864

#SPJ11

On the graph of f(x) = sin(x) on the interval [0, 2π), the function achieves a maximum value at x = π/2.

The function f(x) = sin(x) is a periodic function with a period of 2π. Within one period, the function oscillates between the values of -1 and 1. The maximum value of sin(x) is 1, and it occurs when the angle x is π/2.

In the given interval [0, 2π), the function f(x) = sin(x) completes one full period. Starting from x = 0, the function increases and reaches its maximum value of 1 at x = π/2. After that, it starts decreasing and goes through one complete cycle by the time it reaches x = 2π.

Therefore, on the graph of f(x) = sin(x) on the interval [0, 2π), the function achieves a maximum value at x = π/2.

Learn more about graphs here:

https://brainly.com/question/17267403

#SPJ11

Answer: 96 oz

Step-by-step explanation:

The value of x from the figure is [tex]cos^-1(\frac{14}{13} )[/tex]

From the given diagram, we have the following

The required angle is x

Using the SOH CAH TOA identity

[tex]cos \theta =\frac{adj}{hyp}\\ cos \theta =\frac{14}{13}\\ \theta = arccos(\frac{14}{13} )[/tex]

Hence the value of x from the figure is [tex]cos^-1(\frac{14}{13} )[/tex]

Learn more on SOH CAH TOA here: https://brainly.com/question/22307176

Answer:

45

Step-by-step explanation:

3 out of 12 is 1/4, or 0.25, so if you divide 180 by 4, then using the same logic, you can expect 45 kids to have played last year.

3 = 1/4 OR .25 of 12, 12 divided by 4 = 3

180 divided by 4 = 45

Answer:

yes its 45 i did the test and i got an 100

Step-by-step explanation:

heres proof

Answer:

Building new bike paths.

Step-by-step explanation:

The reason I choose this answer was because the other ones would all use more gas when bike paths would limit the amount of driving and add to the amount of biking done.

Answer:

104.8

Step-by-step explanation:

16 x 6.55 = 104.8

Answer:

104.8 millimeters

Step-by-step explanation:

16 x 6.55 = 104.8

Answer:

45 degree

Step-by-step explanation:

a. The mean of the data set is 6.3333, the median is 4.5, and there is no mode. b. The range of the data set is 9, and the variance is 11.8667.

a. To compute the mean, we sum up all the values in the data set and divide it by the number of data points. In this case, the sum is 4 + 9 + 10 + 4 + 3 + 12 = 42. Dividing this by 6 (the number of data points), we get a mean of 42/6 = 6.3333.

To compute the median, we arrange the data set in ascending order: 3, 4, 4, 9, 10, 12. Since the number of data points is even, we take the average of the middle two values, which are 4 and 9. The median is (4 + 9) / 2 = 4.5.

The mode is the value(s) that appear most frequently in the data set. In this case, none of the values are repeated, so there is no mode.

b. The range is the difference between the largest and smallest values in the data set. In this case, the largest value is 12 and the smallest value is 3, so the range is 12 - 3 = 9.

The variance measures the variability of the data set. It is calculated by taking the average of the squared differences between each data point and the mean. Using the formula for sample variance, the calculations are as follows:

[tex](4 - 6.3333)^2 + (9 - 6.3333)^2 + (10 - 6.3333)^2 + (4 - 6.3333)^2 + (3 - 6.3333)^2 + (12 - 6.3333)^2 = 71.2[/tex]

Dividing this sum by n-1 (where n is the number of data points) gives us the sample variance: 71.2 / 5 = 14.24.

Therefore, the variance is 14.24.

Learn more about mean here:

https://brainly.com/question/31101410

#SPJ11

Answer:

1.

2. 4:7

3.

4.10:4

5.

id k the rest sorry :/

Equilibrium point is a sink, a source, a saddle, or a nodal source (centre).

The equilibrium point is a sink in a phase diagram. A sink is a point towards which any system that begins near it will converge. This is a stable point that attracts nearby systems towards it. When the system comes close to the sink, it will slow down as it approaches, then stop at the sink. A sink is a stable equilibrium point. This is also known as an attractor that attracts nearby points. The phase diagram is a visual representation of the equilibrium point's behavior in the system. The arrows that come into or go out of the sink are pointing towards it, and they represent the direction of the flow of the system. Thus, the sink's shape is inward, indicating that any system near it will converge towards it.

Know more about equilibrium here:

https://brainly.com/question/14281439

#SPJ11

Answer:

50°

Step-by-step explanation:

We are to find m ∠2

And lines A and B are parallel

m ∠2 and 50° are Vertical angles. This means m ∠2 is the same as 50°

Hence,

m ∠2 = 50°

Therefore, m ∠2 = 50°

The forces [tex]F_3[/tex] that must act on the object so that the sum of the forces is zero are [tex]F_3[/tex] = (-10, -10, -12).

To find the forces [tex]F_3[/tex] that must act on the object so that the sum of the forces is zero, we need to find a vector [tex]F_3[/tex] that satisfies the equation

[tex]F_1 + F_2 + F_3 = 0.[/tex]

Given the forces:

[tex]F_1[/tex] = (10, 6, 3)

[tex]F_2[/tex] = (0, 4, 9)

We can rearrange the equation to solve for [tex]F_3[/tex]:

[tex]F_3 = -F_1 - F_2[/tex]

Now, let's calculate [tex]F_3[/tex]:

[tex]F_3[/tex] = -(10, 6, 3) - (0, 4, 9)

  = (-10, -6, -3) - (0, 4, 9)

  = (-10-0, -6-4, -3-9)

  = (-10, -10, -12)

Therefore, the forces [tex]F_3[/tex] that must act on the object so that the sum of the forces is zero are [tex]F_3[/tex] = (-10, -10, -12).

Learn more about vectors at:

https://brainly.com/question/27854247

#SPJ4

Answer:

48

Step-by-step explanation:

Number of comedy = 6

Number of action = 4

Number of drama = 2

Selecting one of each ; total Number of possible combinations ;

nCr

Comedy = 6C1

Action = 4C1

Drama = 2C1

6C1 * 4C1 * 2C1 = 6 * 4 * 2 = 48

Answer:

81

Step-by-step explanation:

81

Answer:

6+3=9x9=81 final answer 81.

Step-by-step explanation:

The solution to the given integral is: frac{pi}{4}g(x) + frac{1}{2}cdot frac{Gamma(frac{3}{2})Gamma(frac{1}{2})}{Gamma(2)} cdot g(x).

Given integral: int_0^1 (1-t^2)g(x) dt

To solve the given integral, we will make use of Beta function.

The Beta function is defined as follows:

B(p,q) = int_0^1 t^{p-1}(1-t)^{q-1} dt

Using substitution, t = sin theta, we get:

int_0^1 (1-t^2)g(x) dt = int_0^{frac{pi}{2}} (1-sin^2 theta)g(x) cos theta dtheta

= int_0^{frac{\pi}{2}} cos^2 theta g(x) d\theta

= frac{1}{2}\int_0^{\frac{\pi}{2}} (1+\cos 2\theta) g(x) d\theta

= frac{1}{2} \left(\int_0^{\frac{\pi}{2}} g(x) dtheta + int_0^{frac{pi}{2}} g(x) cos 2theta dtheta right)

Using B(p,q)$ for the second integral, we get:

int_0^1 (1-t^2)g(x) dt = frac{1}{2}left(frac{pi}{2}g(x) + frac{1}{2}cdot frac{Gamma(frac{3}{2})Gamma(frac{1}{2})}{Gamma(2)} cdot g(x) right)

= frac{pi}{4}g(x) + frac{1}{2}cdot frac{Gamma(frac{3}{2})Gamma(frac{1}{2})}{Gamma(2)} cdot g(x).

Hence, the value of the given integral int_0^1 (1-t^2)g(x) dt is frac{pi}{4}g(x) + frac{1}{2}cdot frac{Gamma(frac{3}{2})Gamma(frac{1}{2})}{Gamma(2)} cdot g(x).

#SPJ11

Let us know more about integral: https://brainly.com/question/31059545.

Answer:

B. Addition Property of Equality; Division Property of Equality

Step-by-step explanation:

The answer is D, because in step c. you add  to both sides to get rid of the  on the right hand, so you use the fact that you can add the same number to both sides of an equation.

Likewise, in step f. you divided both sides by  to get rid of the  coefficient, so you use the fact that you can divide both sides of an equation by the same number.

...............................................................................................................................................

Answer:

Option C and B

Step-by-step explanation:

In the question step C is 23 + 11 = -11 +(-4x) + 11

which is in the form of a + b = c + a

In step C we have added 11 on both the sides to eliminate 11 from right side of the equation.

property which signifies this step is

Addition property of equality :

In step 'f' expression is

In this step equation has been divided by -4 on both the sides to eliminate 4 from the numerator.

In this step division property of equality has been applied.

Therefore Option C and B are the correct options.

Answer:

B. Addition Property of Equality; Division Property of Equality

Step-by-step explanation:

hope it helps...

Answer:

-----------------------

Standard form of a quadratic equation:

Convert the given into standard form:

Compare the equations to find coefficients

a. The null hypothesis (H0) would state that the mean recall of ad information for children who receive an audiovisual presentation is equal to the mean recall.

a.The alternative hypothesis (Ha) would state that the mean recall of ad information differs between the two groups.

b. To find the test statistic, we can use the two-sample t-test formula:

t = (x1_bar - x2_bar) / sqrt((s1^2/n1) + (s2^2/n2))

Substituting the given values:

t = (3.70 - 3.30) / sqrt((1.98^2/20) + (2.13^2/20))

c. The rejection region for a significance level of α = 0.10 in a two-tailed test can be determined using a t-table or a t-distribution calculator. Since the alternative hypothesis is two-tailed, we need to split α equally between the two tails. In this case, the rejection region would be t < -1.734 or t > 1.734.

d. Based on the test statistic value calculated in part (b), we can compare it to the rejection region. If the test statistic falls within the rejection region, we reject the null hypothesis. If it falls outside the rejection region, we fail to reject the null hypothesis. In this case, we would fail to reject the null hypothesis since the test statistic does not fall within the rejection region. Therefore, we cannot conclude that the mean recall of ad information differs between the two groups, supporting the researchers' theory.

e. The p-value is a measure of the strength of evidence against the null hypothesis. In this case, the researchers reported a p-value of 0.62. Since this p-value is greater than the significance level of α = 0.10, it indicates that the observed data is likely to occur by chance alone assuming the null hypothesis is true. Therefore, we fail to reject the null hypothesis and cannot conclude that there is a significant difference in the mean recall of ad information between the two groups.

f. For the inference to be valid, certain conditions must be met. These conditions include random sampling, independence between observations, approximately normal distributions of the populations or large sample sizes, and equal variances between the groups. Without information about the sampling method and data characteristics, we cannot determine if these conditions were met. It is important to note that if the conditions for inference are not met, the validity and reliability of the test results may be compromised.

Learn more about null hypothesis here:

https://brainly.com/question/30821298

#SPJ11

In the context of the Exponential distribution with parameter β, the statistics βYn and 2nβYn are both pivotal quantities. They can be used to construct confidence intervals for β.

A pivotal quantity is a function of the data and a parameter that has a known distribution regardless of the parameter's true value. In this case, both βYn and 2nβYn are pivotal quantities because their distributions (Gamma and chi-squared, respectively) do not depend on the unknown parameter β.

To construct a 95% confidence interval for β using the first pivot, βYn, we can utilize the properties of the Gamma distribution. The interval will be of the form [a, b], where a and b are the lower and upper bounds determined based on the cumulative distribution function of the Gamma distribution. This interval represents a range of plausible values for the parameter β.

Similarly, to construct a 95% confidence interval using the second pivot, 2nβYn, we can employ the chi-squared distribution. The interval will have the form [c, d], where c and d are the lower and upper bounds determined based on the cumulative distribution function of the chi-squared distribution. This interval also represents a range of plausible values for β.

When comparing both intervals, considerations such as width, interpretability, and efficiency are important. The recommended interval would be the one that is narrower (smaller width) and easier to interpret. Additionally, the efficiency of the estimators used in constructing the intervals should be taken into account.

In conclusion, both pivotal quantities, βYn and 2nβYn, can be used to construct 95% confidence intervals for β. The choice between them depends on factors such as width, interpretability, and efficiency. A comprehensive analysis considering these factors will determine the most suitable interval to use.

Learn more about Gamma distribution here:

https://brainly.com/question/31500230

#SPJ11

Answer:

-3.5

all u have to do is get the 2 and the 7 and just subtract and the 8 and 10

Answer:

I believe its 10 but forgive me if I'm wrong

Answer:

F(x)=h(x)-8

I think

Step-by-step explanation:

Answer:

I got 1.75 too

Step-by-step explanation:

20/3.5 is 5.7

10/5.7 is 1.75

The rectangular billboard is 1.75 inches tall in the scale model.

The ratio of the scale of an original thing to a new object that is a representation of it but of a different size is known as a scale factor (bigger or smaller).

The fundamental equation to determine a figure's scale factor is written as, Scale factor is equal to the ratio between the dimensions of the new and old shapes.

Given that, a rectangular billboard for a high school is 10 feet high and 20 feet long.

In a scale model of the school, the billboard is 3.5 inches long.

So, the scale factor = 3.5/20

= 0.175 inches

Thus, the height is 10×0.175

= 1.75 inches

Therefore, the rectangular billboard is 1.75 inches tall in the scale model.

To learn more about the scale factor visit:

https://brainly.com/question/22312172.

#SPJ6

Answer:

Step-by-step explanation:

Distributive Property

commutative property of addition.

assosciative property of addition

Answer:

distrubutive property

Step-by-step explanation:

Answer:

[tex] m\angle SXW =113\degree [/tex]

Step-by-step explanation:

In circle with center X, VS is diameter.

So [tex] \widehat {SWV} [/tex] is a semicircular arc.

[tex] \therefore m\widehat{SWV} = 180\degree [/tex]

[tex] \therefore (12x+7)\degree + (21x +8)\degree = 180\degree [/tex]

[tex] \therefore (33x+15)\degree = 180\degree [/tex]

[tex] \therefore 33x+15 = 180 [/tex]

[tex] \therefore 33x = 180-15 [/tex]

[tex] \therefore 33x = 165 [/tex]

[tex] \therefore x =\frac{165}{33} [/tex]

[tex] \therefore x =5 [/tex]

[tex] m\angle SXW =m\widehat{SW} [/tex]

(Measure of central angle is equal to the measure of its corresponding minor arc)

[tex] m\angle SXW =(21x + 8)\degree [/tex]

[tex] m\angle SXW =(21\times 5+ 8)\degree [/tex]

[tex] m\angle SXW =(105+ 8)\degree [/tex]

[tex] m\angle SXW =113\degree [/tex]