Vanadium (V)
Vanadium is the only one in the 4th period here so
Choose all that are correct about the elements in the column highlighted in blue
in the periodic table below (there are FOUR correct answers)
Answer:
1. Are Metals
2. Are Solids
3. Are Un-reactive
4. Have 18 valence electrons
Explanation:
In a color coded periodic table of the components, the crate for every component is colored. This tone speaks to the classes of components, which incorporate metals, metalloids and non-metals. All in all, the color blue is used for metals, orange for metalloids and green for non-metals. The periodic table might be further tone coded to incorporate different gatherings, for example, transition metals, rare earths, alkali metals, alkaline earths, halogens and noble gases.
The modern periodic table coordinates components by their nuclear number, which is extraordinary to every component. The nuclear number speaks to the quantity of protons in a particle of the component. In the cutting edge occasional table, the nuclear number increments from left to right and through and through. The occasional table is likewise coordinated into periods and groups. Periods are the rows and groups are the columns. The components in every period start with metals on the left side, at that point move to metalloids and afterward to non-metals on the right. The components contained in each group have comparative actual properties.
Enzymes help the process of _digestion.
Answer: Yes they help you digest foods in your stomach
Explanation:
If you need a refresh of them: Enzymes create chemical reactions in the body. They actually speed up the rate of a chemical reaction to help support life. The enzymes in your body help to perform very important tasks. These include building muscle, destroying toxins, and breaking down food particles during digestion.
A compound having an approximate molar mass of 165 - 170 g has the following...
A compound having an approximate molar mass of 165 - 170 g has the following percentage composition by mass: carbon, 42.87%; hydrogen, 3.598%; oxygen,
28.55%; nitrogen, 25.00%. Determine the empirical and molecular formulas of
the compound.
Answer:
Find ratio of atoms for empirical formula, divide mass by atomic mass
C=42.87/12 = 3.57
H= 3.598/1 = 3.598
O= 28.55/16 = 1.784
N= 25.00/14 =1.1785
to see ratio, divide by smallest no
Gives C2H2ON for empirical formula
Empirical mass = 24 +2 +16 + 14 = 56
165 to 170 /56 = 3
so molecular formula = empirical formula x 3= C6H6O3N3
1. The empirical formula of the compound is C₂H₂ON
2. The molecular formula of the compound is C₆H₆O₃N₃
1. Determination of the empirical formula.From the question given above, the following data were obtained:
Carbon (C) = 42.87%
Hydrogen (H) = 3.598%
Oxygen (O) = 28.55%
Nitrogen (N) = 25.00%
Empirical formula =?C = 42.87%
H = 3.598%
O = 28.55%
N = 25.00%
Divide by their molar mass
C = 42.87 / 12 = 3.5725
H = 3.598 / 1 = 3.598
O = 28.55 / 16 = 1.7844
N = 25.00 / 14 = 1.7857
Divide by the smallest
C = 3.5725 / 1.7844 = 2
H = 3.598 / 1.7844 = 2
O = 1.7844 / 1.7844 = 1
N = 1.7857 / 1.7844 = 1
Therefore, the empirical formula of the compound is C₂H₂ON
2. Determination of the molecular formula.Molar mass of compound = (165 + 170)/2
Molar mass of compound = 335/2
Molar mass of compound = 167.5 g/mol
Empirical formula = C₂H₂ON
Molecular formula =?Molecular formula = Empirical formula × n = molar mass of compound
[C₂H₂ON]n = 167.5
[(12×2) + (2×1) + 16 + 14]n = 167.5
[24 + 2 + 16 + 14]n = 167.5
56n = 167.5
Divide both side by 56
n = 167.5 / 56
n = 3
Molecular formula = [C₂H₂ON]n
Molecular formula = [C₂H₂ON]₃
Molecular formula = C₆H₆O₃N₃Therefore, the Molecular formula of the compound is C₆H₆O₃N₃
Lear more: https://brainly.com/question/23629778
How many grams are in 2.5 moles of PO4?
How much silver phosphate is produced if 10 g of silver acetate is reacted with excess sodium phosphate?
Answer:
Calculate the mass of silver phosphate produced if 30.0 grams of silver acetate completely reacts with sodium phosphate.
According to stoichiometry of the balanced chemical reaction between silver phosphate and silver acetate 8.359 g silver phosphate is produced if 10 g of silver acetate is reacted with excess sodium phosphate.
What is stoichiometry?It is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.
Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.In the given reaction 500.73 g of silver acetate produces 418.58 g silver phosphate, thus 10 g silver acetate is produced when 10×418.58/500.73 =8.359 g.
Thus, 8.359 g silver phosphate is produced if 10 g of silver acetate is reacted with excess sodium phosphate.
Learn more about stoichiometry,here:
https://brainly.com/question/9743981
#SPJ2
As the sun sets, the temperature of the room decreases. Explain how this affects the particle motion of the gas particles in the room. Be sure to include collisions, kinetic energy, pressure, and thermal energy in your answer.
Answer:
Heres a very LONG answer-
The real answer:
Its in the kinetic-molecular theory, the temperature of a substance is related to the average kinetic energy of the particles of that substance. When a substance is heated, some of the absorbed energy is stored within the particles, while some of the energy increases the motion of the particles.
what is the net force of 4N 2N!!
Answer: 4 N-2 N=2 Nto the left. Change in motion: The box will move to the left. 7.)
Explanation: Please mark branliest.
Which organisms are typical decomposers?
Answer:
Insects, bacteria and fungi
Explanation:
Compare the atomic radii of neutral atoms 7N,8O,11Na and 12Mg and expalin briefly
7. Some products or processes claim to be "chemical free" or say "no chemicals added." Based on your understanding of chemistry, what are the arguments for and against such statements?
Please i need help
The meaning behind the statement is that the products does not contains any synthetic and harmful chemicals such as colourants, preservatives etc.
What are synthetic chemicals?All natural products or materials contains certain kind of chemicals which are naturally made in them. Such chemicals are natural chemicals and does not harm the living or causes any unwanted reaction.
The chemicals which are made by humans for specific purposes are called synthetic chemicals. Which can be of toxic and hazardous. Almost all materials we use everyday such as toothpastes, shampoo, food items, dyes, medicines and the fertilizers and pesticides we use in agriculture are all chemicals.
These chemicals helps in some way but they can be harmful to life in other way. Some products claim that they are chemical free, may true or not they intending to clear that the product does not contain any synthetic chemical except the required natural chemicals.
To find more about synthetic chemicals, refer the link below:
https://brainly.com/question/19938248
#SPJ2
Is honors high school chemistry hard? Is it hard mathematically? please answer ASAP i have to put in my courses for next year.
Explanation:
yes its hard if you don't pay attention.
Yes, the math is harder but chemistry is not it's really fun the math does get harder tho.
Is the trend in reactivity for nonmetals the same as the trend in reactivity for metals?
Answer:
no
Explanation:
In Non-metals
Period - reactivity increases as you go from the left to the right. Group - reactivity decreases as you go down the group
In Metals
Reactivity increases down a group because as nuclear shielding increases and the nucleus' hold on the valence electron weakens, therefore it is easier to remove valence electrons.
Please help first to answer will get brainliest.
A model of the water cycle was made by adding a small amount of water into an aquarium, covering the aquarium with a piece of glass, and placing a lamp over the glass cover to add heat. What does the lamp represent when comparing this model to the real-life water cycle?
( A)Clouds
( B)Precipitation
( C)The ocean
( D)The sun
Answer:
D the sun
Explanation:
The sun adds heat to make the water evaporate.
Answer:
B)
Explanation:
The sun causes evaporation by heat, the lamps bulb will get hot and be a model of the sun. We know this because heat evaporates water.
Which phrases describe sedimentary rock?
A working model used to test a design is called a
Answer:
A working model used to test a design is called a
stop
what are the things used in soap? are they good or bad to our skin?
Answer: Your skin is your largest organ—22 square feet on average— Cleansers and body washes—might actually be doing us more harm than good, but, unfortunately, it absorbs harmful chemicals we put on it, too.
Explanation: Some are bad like scented body wash and hair stuff. But unscented is WAY better than scented, I learned that the hard way...
In a molecule of calcium sulfide, calcium has two valence electron bonds, and a sulfur atom has six valence electrons. How many lone pairs of electrons are present in the Lewis structure of calcium sulfide? Also, state why.
A. one
B. two
C. three
D. four
E. none
There are 2 lone pairs
Further explanationGiven
a molecule of calcium sulfide
two valence electron of Calcium(Ca)
six valence electrons of Sulfur(S)
Required
number of lone pairs of electrons
Solution
Lewis structure shows the form of bonds that occur in the valence electrons of an element or compound
Valence electrons are electrons used in a chemical bond
To achieve stability, the element S needs 2 more electrons which are obtained from 2 electrons from the Ca element,
A lone pair electrons means refers to an unshared pair of electrons(not bonding to the other atoms)
A heat energy of 645 J is applied to a sample of glass with a mass of 28.4 g. Its temperature increases from –11.6 °C to 15.5 °C. Calculate the specific heat of glass.
Answer:838J/kg/K
Explanation:
use : Q= mS◇ T
The sum of all the potential energy and kinetic energy in an object is equal to it's
Answers Choices: A. Thermal Energy B. Kinetic Energy C.Potential Energy D. Force PLEASE HELP DUE TODAY
Answer:
B. kinetic energy
Explanation:
The sum of kinetic energy and potential energy of an object is its total mechanical energy.
Which of these electron configurations is not possible?
Answer:
D
Explanation:
Electrons are being filled according to the increasing other of their sublevel energy
How many moles of sodium hydroxide are required to react completely with 23.1 moles of sulfuric acid?
H2SO4(aq) + NaOH(aq) = 2H2O(L) + Na2SO4(aq)
Select one:
a. 46.2 moles NaOH
b. 11.6 moles NaOH
c. 5.78 moles NaOH
d. 23.1 moles NaOH
Answer:
46.2 moles of NaOH are required.
Explanation:
Given data:
Moles of NaOH required = ?
Moles of H₂SO₄ = 23.1 mol
Solution:
Chemical equation:
H₂SO₄ + 2NaOH → 2H₂O + Na₂SO₄
Now we will compare the moles of NaOH with H₂SO₄.
H₂SO₄ : NaOH
1 : 2
23.1 : 2×23.1 = 46.2
Thus, 46.2 moles of NaOH are required.
How do the different cycles of energy and matter on Earth interact with each other?
Answer:
Energy enters the biosphere as sunlight. Plants change this energy into chemical energy through the process of photosynthesis. Then, the energy is passed to organisms that eat the plants. Energy and matter are also passed between organisms when they eat one another.
pls give me brianliest and rate me
please please help me i’m so confused! i will give brainleiest answer
{calcium nuclear charge 20+}
{calcium atomic mass 40amu}
1) determine the number of charged particles in the nucleus of calcium atom then deduce the number of electrons
{given the relative charge of a proton =1+\m 1 nucleon = 1amu}
2) determine its mass number A
3) determine the competition of this calcium atom
Answer:
PLEASE MARK AS BRAINLIEST!!
Explanation:
Calcium has an atomic number of 20 and an atomic mass of 40
The mass number of an isotope is the sum of the number of protons and neutrons in the atomic nucleus. The atomic number is the number of protons. The calcium-40 isotope has a mass number of 40 , and an atomic number of 20 , therefore it has 20 protons.
how many grams are in 22.3 mole of Copper (II) Hydroxide?
Answer:
2180 g Cu(OH)₂
General Formulas and Concepts:
Chemistry - Atomic Structure
Reading a Periodic TableUsing Dimensional AnalysisExplanation:
Step 1: Define
22.3 mol Cu(OH)₂
Step 2: Identify Conversions
Molar Mass of Cu - 63.55 g/mol
Molar Mass of O - 16.00 g/mol
Molar Mass of H - 1.01 g/mol
Molar Mass of Cu(OH)₂ - 63.55 + 2(16.00) + 2(1.01) = 97.57 g/mol
Step 3: Convert
[tex]22.3 \ mol \ Cu(OH)_2(\frac{97.57 \ g \ Cu(OH)_2}{1 \ mol \ Cu(OH)_2} )[/tex] = 2175.81 g Cu(OH)₂
Step 4: Check
We are given 3 sig figs. Follow sig fig rules and round.
2175.81 g Cu(OH)₂ ≈ 2180 g Cu(OH)₂
How many moles are in 5.4x1024 molecules of C4H2F7I, heptafluoro-1-iodobutane? Group of answer choices
Given :
Number of molecules of [tex]C_4H_2F_7I[/tex].
To Find :
How many moles are in given number of molecules.
Solution :
We know, in 1 moles of any element/compound contains [tex]6.022\times 10^{23}[/tex] at atoms/molecules.
So, number of moles in [tex]5.4\times 10^{24}[/tex] molecules are :
[tex]n = \dfrac{5.4\times 10^{24}}{6.022\times 10^{23}}\\\\n = 8.97 \ moles[/tex]
Therefore, number of moles are 8.97 .
During the formation of ammonia, what mass of Hydrogen gas would be required to react completely with 42g of nitrogen gas?
Answer:
9 grams
Explanation:
Hope it can help you.....
how many atoms are in a compound
Answer:
Compounds are made of two or more atoms of different elements,
Explanation:
Answer:
6.022×1023 atoms —1.00 mol of atoms.
Explanation:
n the diagram shown, when an object ‘X’ is brought near the ring shaped magnet, the magnet moves away from it. Four friends are discussing what they can say about X. Nikhil: X can be a piece of any metal. Shailaja: X can only be a piece of iron. Akash: X is definitely a magnet. Vinay: X can neither be a magnet or an iron piece. Who is correct?
Answer:
Akash
Explanation:
it could be a magnet with the same poles facing eachoher
Which elements are abundant in visible universe
Hydrogen is the most abundant element in the Universe; helium is second. However, after this, the rank of abundance does not continue to correspond to the atomic number; oxygen has abundance rank 3, but atomic number 8. All others are substantially less common.
HOPE THIS HELPED <3
Why do covalent compounds tend to be squishy?
Answer:
Since they're easy to separate, covalent compounds have low melting and boiling points. 2) Covalent compounds are soft and squishy (compared to ionic compounds, anyway). The reason for this is similar to the reason that covalent compounds have low melting and boiling points. When you hit an ionic compound with something, it feels very hard
Explanation:
mark brainliest plz