How many molecules are there in 6.73 moles of phosphorus trichloride? (write your answer in scientific notation).

Answer:

Mg(s) + 2H⁺(aq) ⟶ Mg²⁺(aq) + H₂(g)  

Explanation:

A net ionic equation shows all the ionic substances as ions and shows the correct state of each substance.

Magnesium react with hydrochloric acid according to the equation :

This demonstration can be used to illustrate the characteristics reactions of metals with acid , a single replacement reaction ,or to demonstrate the generation of hydrogen gas.

Answer:

The alkali metals/group 1 are recognized as a group and family of elements. These elements are metals. Sodium and potassium are examples of elements in this family. Hydrogen is not considered an alkali metal because the gas does not exhibit the typical properties of the group. The largest family of elements consists of transition metals/group 3-12/group 3a. The center of the periodic table contains the transition metals, plus the two rows below the body of the table (lanthanides and actinides) are special transition metals. Even though both are metals, transition metals have higher melting points; they have higher density; they are less reactive with water; they react and form ions with different charges, but Group 1 metals only form 1+ ions. (Hope the is helpful! You can reword it if you want...)(same answer from the other same question you posted)

Answer:

d.

Explanation:

po ata d ako sure sorry

The given question is incomplete. the complete question is:

The electron arrangement ions [tex]X^{3+}[/tex] and [tex]Y^{2-}[/tex] are 2, 8, and 2, 8, 8 respectively.

Write the electronic arrangement of the elements X and Y.

Write the formula of the compound that would be formed between X and Y.

Answer: 1. The electronic arrangement for X and Y are 2,8, 3 and 2,8,5 respectively.

The formula of the compound formed is [tex]X_2Y_3[/tex]

Explanation:

Electronic configuration is the arangement of electrons in an atom in order of increasing energies.

Cations are formed when electrons are lost by atoms and anions are formed when electrons are gained by atoms.

[tex]X^{3+}:2,8[/tex]

[tex]X:2,8,3[/tex]

[tex]Y^{3-}:2,8,8[/tex]

[tex]Y:2,8,5[/tex]

For formation of a neutral ionic compound, the charges on cation and anion must be balanced.

Here element X is having an oxidation state of +3 called as [tex]X^{3+}[/tex] cation and [tex]Y^{2-}[/tex] is an anion with oxidation state of -2. Thus they combine and their oxidation states are exchanged and written in simplest whole number ratios to give neutral [tex]X_2Y_3[/tex]

Answer:

785

=

233

k

=

45.5

m

L

=

745

=

634

L

=

Explanation:

Answer:

Relation between , molality and temperature is as follows.

                T =

It is also known as depression between freezing point where, i is the Van't Hoff factor.

Let us assume that there is 100% dissociation. Hence, the value of i for these given species will be as follows.

         i for  = 3

          i for glucose = 1

          i for NaCl = 2

Depression in freezing point will have a negative sign. Therefore, d

depression in freezing point for the given species is as follows.

                 =

                  =

                   =

Therefore, we can conclude that given species are arranged according to their freezing point depression with the least depression first as follows.

                    Glucose < NaCl <

Explanation:

Answer:

A

Explanation:

the chemical energy in the phosphorous in the match turns into heat energy once the match is struck and starts to combust.

Answer:

To use standard laboratory measurement devices to measure length, volume and mass amounts.

Answer:

it means 2 oxygen atoms in the molecule

Explanation:

6.73 L

This one requires the combined gas law.

P1V1/T1 = P2V2/T2

P1 = 150 kPa = 1.48 atm

V1 = 5 L

T1 = 300 K

P2 = 1 atm

V2 = This is what we’re solving for.

T2 = 273 K

P2 and T2 are based on the conditions of STP. I also changed P1 to atm to keep the units consistent.

Solve the equation for V2:

V2 = P1V1T2 / T1P2

V2 = (1.48 atm)(5 L)(273 K) / (300 K)(1 atm) = 6.73 L

Answer:

B) go look on the periodic table for the atomic number

Explanation:

The atomic number is how many protons is in an atom

Answer:

Either A or B

Explanation: Because I learned it on Edge. :)

6.32 KJ is how much heat is given off

Answer:

brainly blurred the half of the question i cant read it completely

Explanation:

Answer:

High blood pressure. High blood pressure (hypertension) is one of the most important risk factors for CVD.

High cholesterol - High-fat diet.

Answer:

False

Explanation:

Few organisms were not preserved as well as others, and new fossils are found every day

Answer:

1 mole of O contains 16g

x mole of O will contains 30.1 g

= 16x = 30.1

16x/16= 30.1/16

= 1.88 mole of O

the answer is 1.88 mole of O

Answer: molarity = mole solute/ liter of solution.

=> volume= mole/molarity = 1/5 = 0.2 L = 200mL

Explanation:

Answer:

[tex]V_2=1099.35mL[/tex]

Explanation:

Hello there!

In this case, according to the given information, it is possible to infer that as both the amount of the gas and the pressure remains the same, we can solve this problem via the Charles' law a directly proportional relationship between the volume and temperature:

[tex]\frac{V_2}{T_2} =\frac{V_1}{T_1}[/tex]

Thus, by solving for the final volume, V2, we obtain:

[tex]V_2 =\frac{V_1T_2}{T_1} \\\\V_2 =\frac{886mL*371K}{299K}\\\\V_2=1099.35mL[/tex]

Best regards!

Answer:

v = 43.72 m/s

Explanation:

Given that,

Initial velocity of the train, u = 31 m/s

Acceleration of the train, a = 0.0705 m/s²

Time for which the train travel, t = 180.5 s

We need to find the final velocity of the train. Let it is v.. Using first equation of kinematics to find it such that,

[tex]v=u+at\\\\v=31+0.0705\times 180.5\\\\v=43.72\ m/s[/tex]

So the final speed of the train is equal to 43.72m/s.

Answer:

yea that's true

things you can do is: reduce ,reuse, and recycle

reduce the use of air/heat

remove lightbulbs and replace led bulb

drive less

plant a tree

Explanation:

Answer:

True

Explanation:

The answer to this question is true. The oxidizing flame is a flame which is gotten when oxygen is used excessively. The flame is bluish or almost purple in color. And it makes a hissing sound. The flame from this is shorter than the neutral flame. In the neutral flame there is neither the occurrence of oxidation or reduction.

Answer:

electrons can bond atoms together

Explanation:

when two atoms share electrons,they are locked together by that sharing.These are called covalent bonds...but when an atom gives one of its electrons to another atom ,they are held together by electric forces.HOPE THAT HELPED☺

Explanation:

electron can bond each other

Answer: Ionic bonds result from transfer of electrons, whereas covalent bonds are formed by sharing. ... Ionic bonds are electrostatic in nature, resulting from that attraction of positive and negative ions that result from the electron transfer process; charge separation between covalently bonded atoms is less extreme.

Explanation:

From the deepest ocean trench to the tallest mountain, plate tectonics explains the features and movement of Earth's surface in the present and the past.

Developed from the 1950s to the 1970s, the theory of plate tectonics is the modern update to continental drift, an idea first proposed by scientist Alfred Wegener in 1912 which stated that Earth’s continents had “drifted” across the planet over time. Wegener didn't have an explanation for how continents could move around the planet, but researchers do now: plate tectonics.  

Plate tectonics is the theory that Earth's outer shell is divided into large slabs of solid rock, called “plates,” that glide over Earth's mantle, the rocky inner layer above Earth’s core. Earth’s solid outer layer, which includes the crust and the uppermost mantle, is called the lithosphere. It is 100 km (60 miles) thick, according to the Encyclopaedia Britannica. Below the lithosphere is the asthenosphere—a viscous layer kept malleable by heat deep within the Earth. It lubricates the undersides of Earth's tectonic plates, allowing the lithosphere to move around.

Answer:

1. How fast do tectonic plates move? Answer: There are seven major plates: African, Antarctic, Eurasian, Indo-Australian, North American, Pacific and South American

2. What are the factors affecting plate tectonics? Answer: The force that causes most of the plate movement is thermal convection, where heat from the Earth's interior causes currents of hot rising magma and cooler sinking magma to flow, moving the plates of the crust along with them.

3. What 3 things support the theory of plate tectonics? Answer: Modern continents hold clues to their distant past. Evidence from fossils, glaciers, and complementary coastlines helps reveal how the plates once fit together. Fossils tell us when and where plants and animals once existed.

Explanation:

Answer:

1s^2 2s^2 2p^6 3s^1

Explanation:

electron configuration of an element gives description of the distribution of electron in it's orbital of the atom, the superscript symbolize number of electron been hold by them.

The element here is sodium, which is a alkali metal

mass number =23

Number of proton= 11

electron must be seen in thelowest-energy subshell that is available in the the 3s orbital,

Hence, the electronic configuration is

1s^2 2s^2 2p^6 3s^1

Answer:

this should help

Explanation:

Answer:

it's b or d I am not 100% sure witch one tho

Answer:

B.

Explanation:

It is B because it says which is an example of A PHYSICAL MODEL. B is a physical model becuase by using tennis balls to represent the plantes (including the sun)

it is a model of a problem!!!

Have a great day!

Hope this helps!

-Lea

Respuesta:

0.11 L

Explicación:

Paso 1: Escribir la ecuación balanceada

2 LiOH + H₂SO₃ ⇒ Li₂SO₃ + H₂O

Paso 2: Calcular la masa de solución de H₂SO₃

25 mL de solución de H₂SO₃ tiene una denisdad de 1.03 g/mL.

25 mL × 1.03 g/mL = 28 g

Paso 3: Calcular la masa de H₂SO₃ en 26 g de Solución de H₂SO₃

La riqueza de H₂SO₃ es 60%, es decir, cada 100 g de solución hay 60 g de H₂SO₃.

26 g Sol × 60 g H₂SO₃/100 g Sol = 16 g H₂SO₃

Paso 4: Calcular los moles correspondientes a 16 g de H₂SO₃

La masa molar de H₂SO₃ es 82.07 g/mol.

16 g × 1 mol/82.07 g = 0.19 mol

Paso 5: Calcular los moles de LiOH que reaccionan con 0.19 moles de H₂SO₃

La relación molar de LiOH a H₂SO₃ es 2:1. Los moles de LiOH que reaccionan son 2/1 × 0.19 mol = 0.38 mol.

Paso 6: Calcular el volumen de solución de LiOH

0.38 moles de LiOH están en una solución 3.5 M. El volumen requerido es:

0.38 mol × 1 L/3.5 mol = 0.11 L