Answer:
247 ml
Explanation:
How many mL of 0.150 M HF solution are required to produce 0.0370 moles of HF 0.150 moles/ liter = 0.150/1000 moles/ml =0.000150 moles/ml
0.000150 x ? = 0.0370 moles HF
? = 0.0370/0.000150 = 247 ml
check
247 ml = 247/1000 L = 0.247
(0.247) x (0.150) =0.370 check
Convert 1.36x10 to standard form
Answer:
13.6 is the correct answer written in standard form.
Explanation:
1.36, move the decimal once to the right to get 13.6
Answer:
13.6
Explanation:
The standard form is 13.6
Converting from the US customary system to the metric system, 16 fluid ounces is approximately equal to a) 1 gallon. O b) 160 milliliters. c) 480 milliliters. O d) 960 milliliters.
Answer:
473 ml.
Explanation:
In gallons it’s equal to 0.125
6. What is the molarity of 175 mL of solution containing 2.18 grams of NazS04-10H2O?
Answer:
[tex]Molarity\,\,of\,\,the\,\,solution\,\,is\,\,S=0.039M[/tex]
Explanation:
[tex]W=2.18 g\\M=322g\\V=175mL=0.175L\\\\S=\frac{W}{MV} \\=>S=\frac{2.18}{322*0.175} \\So,S=0.039M[/tex]
Hope you have understood this.....
ask me if you have any confusion.....
if you liked it pls mark it as the brainliest
What is the use of GMO?
Some benefits of genetic engineering in agriculture are increased crop yields, reduced costs for food or drug production, reduced need for pesticides, enhanced nutrient composition and food quality, resistance to pests and disease, greater food security, and medical benefits to the world's growing population.
Insect resistance: Corn
Herbicide tolerance: Soybean
what is the free energy change G for the equilibrium between hydrogen iodine a hydrogen and iodine at 4:53
Answer:
Many chemical reactions are reversible; that is, the products of the reaction can combine to re-form the reactants. An example of a reversible reaction is that of hydrogen with iodine to form hydrogen iodide:
H2(g) + I2(g) 2 HI(g)
We can study this reversible reaction by placing hydrogen and iodine in a reaction vessel and then measuring the concentrations of H2, I2, and HI at various times after the reactants are mixed. Figure 13.8 is a plot of the concentrations of reactants and products of this reaction versus time. The concentration of hydrogen iodide increases very rapidly at first, then more slowly, and finally, after the time indicated by the vertical line marked "Equilibrium," remains constant. Similarly, the concentrations of hydrogen and iodine are large at the start of the reaction but decrease, rapidly at first, and then more slowly. Finally, they, too, become constant.
If this reaction were not reversible, the concentrations of hydrogen and iodine would have continued to decrease and the concentration of hydrogen iodide to increase. This process does not happen. Instead, as soon as any molecules of hydrogen iodide are formed, some decompose into hydrogen and iodine. Two reactions are taking place simultaneously: the formation of hydrogen iodide and its decomposition. When the concentrations of all these components become constant (at the equilibrium point in Figure 13.8), the rate of the forward reaction (H2 + I2 2 HI) must be equal to the rate of the reverse reaction (2 HI H2 + I2). A state of dynamic chemical equilibrium has then been reached, one in which two opposing reactions are proceeding at equal rates, with no net changes in concentration.
PICTURE 13.8
FIGURE 13.8 Concentration changes during the reversible reaction
H2(g) + I2(g) 2 HI as it proceeds toward equilibrium.
We have encountered this criterion for equilibrium before. In the equilibrium between a liquid and its vapor, the rate of vaporization is equal to the rate of condensation. In the equilibrium of a saturated solution with undissolved solute, the rate of dissolution is equal to the rate of precipitation. In the equilibrium of a weak acid with its ions, the rate of dissociation is equal to the rate of recombination. Note that none of these reactions is static: Two opposing changes are occurring at equal rates.
B. The Characteristics of Chemical Equilibrium
1. Equal rates
At equilibrium, the rate of the forward reaction is equal to the rate of the reverse reaction.
2. Constant concentrations
At equilibrium, the concentrations of the substances participating in the equilibrium are constant. Although individual reactant molecules may be reacting to form product molecules and individual product molecules may be reacting to re-form the reactants, the concentrations of the reactants and the products remain constant.
3. No free energy change
At equilibrium, the free energy change is zero. Neither the forward nor the reverse reaction is spontaneous and neither is favored. Consider the ice-water change. Above 0°C, ice melts spontaneously to form liquid water; G for this change is negative. Below 0°C, the change from ice to water is not spontaneous; G is positive. At 0°C, the two states are in equilibrium. The rate of melting is equal to the rate of freezing: the amount of ice and water and the amount of liquid water present remain constant, and the free energy change is zero as long as no energy is added to or subtracted from the mixture.
C. The Equilibrium Constant
In Chapter 12, we introduced the mathematical relationship between the concentrations of the components of an equilibrium, known as the equilibrium constant, Keq. We said that, for the general equation of a reversible reaction
Explanation:
sorry(: hope to help
Write a balanced chemical equation for this reaction by completing the reaction below. Add the missing products and coefficients. Do not include phases.
To balance a chemical equation you must pay attention that the algebraic equation has the same number of element atoms in reactant and the product.
A chemical equation is a term to refer to the symbolic description of a chemical reaction, that is, the written representation of symbols. For example:
2H₂ + O₂ ---> 2H₂OThe balance of an equation can be related to the law of conservation of matter, that is, the number of atoms of each element in the reactants is in the result.
Note: This question is incomplete, because the information some information is missing.
Learn more in: https://brainly.com/question/12271256
Mixtures of hydrogen and oxygen in varying concentrations can be sparked to produce water. Define mixture and compound, and then explain the differences between a mixture of hydrogen and oxygen and the compound dihydrogen monoxide (also known as water).
Explanation:
Mixture is the physical Combination Of two or Substance
Example
a mixture of sugar and water.
Compound is the chemical combination of two or more metals.
Example.
a mixture of hydrogen and water.
A mixture of hydrogen and oxygen forms water or H2O
whereas The dihydrogen monoxide parody involves calling water by an unfamiliar chemical name, most often "dihydrogen monoxide" (DHMO), and listing some of water's properties in a particularly alarming manner, such as accelerating corrosion (rust) and causing suffocation (drowning). The parody often calls for dihydrogen monoxide to be banned, regulated, or labeled as dangerous. It plays into chemophobia and demonstrates how a lack of scientific literacy and an exaggerated analysis can lead to misplaced fears. The parody has been used with other chemical names such as hydrogen hydroxide, dihydrogen oxide, hydroxic acid, hydric acid and oxidane.
A Mixture of hydrogen and oxygen in varying concentrations can be sparked to produce water. This is formed due to the property of chemical combination.
A Mixture is the physical Combination Of two or Substance whereas a Compound is the chemical combination of two or more metals.
Example of a mixture is a mixture of sugar and water. And, Example of an compound is A mixture of hydrogen and oxygen forms water or H₂O
Water is also called as dihydrogen monoxide. The prefix mono and di are used to indicate a single atom and combination of two atoms respectively. Some of its properties includes such as accelerating corrosion (rust) and causing suffocation (drowning).
To know more about mixture here
https://brainly.com/question/30667328
#SPJ3
Name the following Type 3 compound
1. PCIE
2. P406
3. SF6
4. SO3
5. SO2
6. N203
7. SiO2
8. O2F2
9. XeF6
Answer:
32
Explanation:
4.What volume of hydrogen gas at STP is produced when 2.5 grams of zinc react with an
excess of hydrochloric acid?
Answer:
0.86
Explanation:
1mol of Zn has mass of 65.39g.The amount of Zn is 2.5g65.39g/mol=0.038mol.
The amount of H2 produced is the same as the amount of Zn consumed (0.038mol).
1mol of ideal gas will occupy 22.4L at STP.
The H2 will occupy 0.038mol×22.4L/mol=0.86L
.
Which factor is NOT important in the fossilization process?
Answer:
Things like the age of the organism, the organism's diet, style of movement (walking or swimming) do not affect how it fossilizes. Answer 2: Fossilization happens when small chunks of rock (such as sand) enter the spaces in a body or plant that would have hosted resin, air, or soft tissue, preserving the body or plant
2. Cells are the_____________ life units on this plane
Answer:
Cell are the smallest life units on this planet
Explanation:
How many atoms are in mercury (I) phospate?
The chemical formula is (Hg2)3(PO4)2
A)11
B)14
C)15
D)16
Mercury (I) phosphate with the chemical formula (Hg2)3(PO4)2 has 16 atoms.
Number of Hg atoms = 2x3 = 6Number of P atoms = 2 x 1 = 2Number of O atoms = 4x2 = 8Sum of all the atoms = 6+2+8
= 16 atoms
More on the number of atoms in a molecule can be found here: https://brainly.com/question/19140379
Explain how the following properties change across the periodic Table from group 1 to group 2, and give reasons for the increase or decrease thereof:
a) Ionic radius
b) Ionization enthalpy
c) Density
d) Melting point
e) Electropositive character
The following properties change across the periodic Table from group 1 to group 2
a) Ionic radius - decreaseb) Ionization enthalpy - increasec) Density - increased) Melting point - increasee) Electropositive character - decreaseGroup 1 are alkali metals that have one valence electron in the outermost orbit whereas alkaline earth metals are in group 2 have two valence electrons in the outermost orbit.
a) Ionic radius:
The atomic and ionic radii of alkaline earth metals are fairly large though smaller than those of the corresponding alkali metals.b) Ionisation enthalpy:
Alkali metals have low Ionisation energy.in the case of alkaline earth metals Ionisation energy is higher compared to alkali metalsc) Density:
The alkaline earth metals are denser than the alkali metals due to the smaller size and better packing of the atoms in the crystal latticed) Melting point:
Melting points of alkaline earth metals are low but higher than those of alkali metals.e) Electropositive character:
all alkali metals are strongly Electropositive due to their low Ionisation enthalpies.alkaline earth metals are less Electropositive than alkali metals.Thus, changes in properties are:
a) Ionic radius - decreaseb) Ionization enthalpy - increasec) Density - increased) Melting point - increasee) Electropositive character - decreaseLearn more:
https://brainly.com/question/19172241
4. A system contracts from an initial volume of 15.0 L to a final volume of 10.0 L under a constant external pressure of 0.800 atm. The value of w, in J, is?
The value of the work done in joule is 405.3 J.
We know that the work done is obtained using the relation;
w = PΔV
Where;
w = work done
P = pressure
V = volume
Now, substituting values,
w = 0.800( 15.0 - 10.0)
w = 4 atm L
Since;
1 L atm = 101.325 J
4 atm L = 4 atm L × 101.325 J/1 L atm
= 405.3 J
Learn more: https://brainly.com/question/865531
why does a Costal area have less variation in temperature
Answer:
*The coastal areas experience less variation in temperature as compared to land. ... It means that water takes more time to get hot or cold then land. Therefore areas near sea or ocean have more moderate temperature in the day time and less cooler at night
Explanation:
the amount of solute dissolved in a solvent
A. Concentration.
B.alloy
C.mixture
D.solution
Answer:
solution
Explanation:
solvent +solute =solution
So My friend has started her you know what and she scared to call her mom what should I do I'm sorry if this question is personal anything but I'm kind of confused cuz she's scared to call her mom her mom is gone so she needs some advice the best person who got the best answer will receive a brainly and 50 more points
Answer: so I was really scared to tell my mom and I was always thinking about how should I tell here but she should tell her mom an just said I think I started my thing her mom wont get mad she got it to and every girl goes thru that so your not alone
Explanation; she does not have to tell her mom but her mom could helpo her and give her tips
Answer:
Tell her to calm down and tell her mum because her mom knows better and would be able to put her through better than anyone could have ever.
The process of returning mines to their original state is called ________________________.
Answer:
Mine Reclamation.Explanation:
The process of returning mines to their original state is called Mine Reclamation. HOPE THIS HELPS :)If an atom should form from its constituent particles,
(a) matter is lost and energy is taken in.
(b) matter is lost and energy is released. .
(c) matter is gained and energy is taken in.
(d) matter is gained and energy is released.
Answer:
(b) matter is lost and energy is released
Explanation:
When atoms are being formed from its constituent components it weighs less this is called mass defect so the answer would be (b) matter is lost and energy is released.
Identify the strongest intermolecular force that is likely to affect each of the samples described below.
A mixture of chlorine gas (Cl) and fluorine gas (F): V London dispersion forces
COMPLETE
Tweaks
Menu
A mixture of hydrogen sulfide (H2S) and hydrogen chloride (HCI): V dipole-dipole interactions
Search
Selection
COMPLETE
Guess
this
hydrogen bonding
A mixture of water (H2O) and ammonia (NH3):
Answer:
A mixture of chlorine gas (Cl2) and fluorine gas (F2):
✔ London dispersion forces
Explanation:
What are the dependent and independent variables in this experiment? How are outside factors being controlled in this experiment to make sure that the results test only the dependent variable?
Answer:
1. An independent variable is manipulated, or changed. The dependent, or responding variable, changes based on the independent variable. The dependent variable is examined.
2. It is a controlled experiment.
Explanation:
In a controlled experiment all variables are kept the same, except for the one being tested, which is called the experimental variable , or independent variable . This group is the experimental group . The group that is not affected by the experimental variable is the control group .
Very often a graph will be used to analyze the results of the experiment. The independent/experimental variable is placed on the x-axis and the dependent variable is placed on the y-axis. The dependent variable is what is measured as a result of the application of the experimental variable.
A variable that is independent is altered. Based on the independent variable, the responding variable, or dependent variable, alters. Examining the dependent variable. The experiment is carefully controlled.
What is an independent variable ?In mathematical modeling, statistical modeling, and experimental sciences, there are dependent and independent variables. Dependent variables get their name because, during an experiment, their values are investigated under the presumption or requirement that they are dependent on the values of other variables due to some law or rule.
A variable that is independent is precisely what it sounds like. It is a stand-alone variable that is unaffected by the other variables you are attempting to assess. Age, for instance, could be an independent variable.
When doing an experiment, the independent variable is what you alter, and the dependent variable is what changes as a result of that change. This is an easy way to conceive of independent and dependent variables.
Thus, based on the independent variable, the responding variable, or dependent variable, alters.
To learn more about independent variable, follow the link;
https://brainly.com/question/967776
#SPJ2
1.An object that produces electrical energy through redox reactions is called ____________.
oxidation
reduction
galvanic/voltaic cell
2.Which species undergoes oxidation?
Pb
Cu
[tex] \huge \bf༆ Answer ༄[/tex]
Question : - 1
An object that produces electrical energy through redox reactions is called Galvanic cell
Question : - 2
Pb undergoes Oxidation
[tex]꧁ \: \large \frak{Eternal \: Being } \: ꧂[/tex]
Part C
Describe the shape of the graph showed in part B.
(Is it like- a normal shape??)
This graph shows a straight line.
Answer:
The graph is a straight line that angles upward.
please i need this now ill give you brainlest
Answer: The following information should be included;
What is the difference between the greenhouse effect, climate change and global warming?
What proof do we have that climate change is happening?
Why is it happening?
0 000
which explains why it is important to eat a full healthy meal before an oron o ping po
Food provides the carbon dioxide that is a product of cellular respiration
Food provides the oxygen that is a product of cellular respiration
Food provides the glucose that is a reactant in cellular respiration.
Food provides the energy that is a reactant in cellular respiration.
Answer:
A healthy diet is essential for good health and nutrition. It protects you against many chronic noncommunicable diseases, such as heart disease, diabetes and cancer. Eating a variety of foods and consuming less salt, sugars and saturated and industrially-produced trans-fats, are essential for healthy diet.
what is the mass number of an atom with 3 protons,4 nuetrons, and 3 electrons
Answer:
Neon 10, mass: 20.18
Explanation:
how many nuetrons are in the nucleous of an atom number of 25?
Answer:
I believe there are 30
Explanation:
For the given reactions determine if the entropy increases or decreases.
A) 2 KClO3 (s)⇌2 KCl (s)+3 O2 (g)
B) CoCl2 (s)+6 H2O (g)⇌CoCl2⋅6H2O
Entropy increases in reaction 1 due to increase in the number of particles while entropy decreases in reaction 2 due to decrease in the number of particles.
Entropy refers to the degree of disorderliness in a system. The higher the entropy, the more disorderly the system is and the lower the entropy, the less disorderly the system is. We must note that entropy increases with increase in the number of particles.
In the reaction, 2 KClO3 (s)⇌2 KCl (s)+3 O2 (g), entropy increases because one of the products is a gas and the number of particles increases from left to right. In the second reaction, CoCl2 (s)+6 H2O (g)⇌CoCl2⋅6H2O, entropy decreases because the number of particles decreases.
Learn more: https://brainly.com/question/14281129
What’s the answer to this? Pls help
Answer:
First choice
Explanation:
Calcium has an electronegativity value of 1.0.
Oxygen has an electronegativity value of 3.5.
What type of bond will form between the two atoms?
Answer:
ionic bond
Explanation:
Calcium gives its two valence electrons to oxygen and forms an ionic bond with oxygen. An ionic bond formed when one atom transfers one or more electrons from itself to its neighboring atom, and an ionic bond formed between the two atoms of the compound.