How many electrons will oxygen gain when it becomes an ion?
A. It will lose electrons.
B. 2
C. 1
D. 3

Answer:

Time of vaporization = 0.588 minutes

Explanation:

The latent heat of fusion is the heat required to change the substance from solid (ice) to liquid completely, without further increase in temperature.

The latent heat of vaporization is the heat required to change a liquid to gas completely, without an increase in temperature.

Latent heat of vaporization = 6.8 times Latent heat of fusion

This means that the time it takes for the latent heat of vaporization to complete vaporization is 6.8 times lesser than the time it takes for the latent heat of fusion to complete fusion

Time of vaporization = 6.8 times lesser than time of fusion

Time of vaporization = (time of fusion) ÷ 6.8

where: Time of fusion = 4 minutes

∴ Time of vaporization = 4 ÷ 6.8

Time of vaporization = 0.588 minutes

Answer:

rising action.

Explanation:

Rising action is a term used in literature to describe the corresponding portion of the story, that occurs immediately before the climax, by increasing its atmosphere or builds-up whereby the tension level surges.

Climax, on the other hand, is a form of the highest point major turning point in a story.

While falling action is the point where there is a quick decrease in tension level, and follows immediately after the climax

Resolution is also known as the final part of the story, it follows immediately after falling action.

Hence, when the problem within the story gets more intense and builds, this is the "Rising Action."

Answer: The options are not given, here are the options.

A)There is an indirect relationship: as thermal energy increases, there is more particle movement.

B) There is an indirect relationship: as thermal energy increases, there is less particle movement.

c) There is a direct relationship: as thermal energy increases, there is more particle movement.*****

d) There is a direct relationship: as thermal energy increases, there is less particle movement.

The correct option is C.

There is a direct relationship: as thermal energy increases, there is more particle movement.*****

Explanation:

There is a direct relationship: as thermal energy increases, there is more particle movement because when there is increase in thermal energy or heat in a substance, the particles start to vibrate and move faster as a result of the particles gaining kinetic energy which is as a result of increased collision and diffussion rates.

As they vibrate the space between the particles increases which result in increase in motion or movement of the particle

Answer:

What Julie did wrong is that she did not read the instructions for her lab of wait for her instructor to allow her to get started.

Explanation:

it is essential to know what you are doing in a science lab because you can be injured seriously if you don't stop and take time to read and listen to you instructors directions.

Answer:

It is made up of 2 elements. The elements are calcium and chlorine.

Explanation:

I just know

Answer:

the energy required to do work

Answer:

D

Explanation:

A plant powered by natural gas releases carbon dioxide

In an ecosystem, a plant powered by natural gas releases carbon dioxide which is toxic for the environment.

Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.

Energy enters the ecosystem through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.

Learn more about ecosystem,here:

https://brainly.com/question/1673533

#SPJ6

Answer:

[tex]1.29 * 10^{24}[/tex] particles of gold

Explanation:

To convert the number of moles of any substance, in this case gold, you need Avogadro's number.

Avogadro's number is always [tex]6.022[/tex] × [tex]10^{23}[/tex]

[tex]2.15[/tex] moles Au × [tex]\frac{6.022*10^{23} particles}{1 mole Au}[/tex] = [tex]1.29 * 10^{24}[/tex] particles of gold

The number of representative particles in 2.15 moles of gold is 1.29 × 10 ²⁴.

The term mole is defined as the amount of  substance containing 6.023 × 10²³ particles. 1 mol = 6.023 × 10²³ particles. This number is also called Avogadro's number. The symbol of mole is denoted by M.

A mole is a very important unit of measurement that chemists use. By using moles, chemists have to measure for very small things like atoms, molecules, or other particles.

The quantity amount of substance is a measure of how many elementary entities of a given substance are present in it.

To convert the number of moles of any substance, we required Avogadro's number.

Avogadro's number is always equal to 6.023 × 10 ²³

2.15 moles Au × 6.023 × 10 ²³ particles / 1 mole of Au

= 1.29 × 10 ²⁴ particles of gold

Thus, the number of representative particles in 2.15 moles of gold is 1.29 × 10 ²⁴.

To learn more about the mole, follow the link;

https://brainly.com/question/26416088

#SPJ6

Answer:

The flame test is important in these fields as it helps scientists in determining the metal ions present in elements under study from their emission spectrum.

Explanation:

The Flame test is an important test in Chemistry that is based on the fact that metal ions emit certain characteristic spectrum. The element under investigation is made to pass through a hot, non-luminous flame. The resulting spectrum emitted determines the present metal ions. It is important in;

1. Forensics: Forensic is the application of scientific methods in detecting crime. If for example, a food substance is poisoned, the flame test can help in determining the metal ions present in the food and to know if they are indeed poisonous.

2. Astronomy: Scientists observe the stars and the spectra emitted by them to know which elements have the same colors. This also helps them to know how many light years away the stars are.

3. Environmental and Industry issues: Some industries may be fund guilty of releasing substances such as in oil exploration or bad water to the environment. Flame tests would help to determine which metal ions are present in these substances and their potential for and degree of harm.

Answer:

309 /1000

Explanation:

Answer:

498

Explanation:

Answer:

[tex] \boxed{ \bold{ \huge{ \boxed{ \sf{cubic \: meter \: ( \: {m}^{3} )}}}}}[/tex]

Explanation:

The space occupied by a body or a substance is known as volume. The standard unit or SI unit of volume is cubic meter ( m³ ).

Hope I helped!

Best regards! :D

Answer:

The answer is "brittle,  dense, and electrically insulating"

Explanation:

An iodine sampling frame is cheaper to transport as a powder because it is fragile, simple for individual bits to break.

The helium gas becomes less dense than for the air components for developers inbreathe, thus a helium gas was filled balloon floats throughout the air.

The plastic is the chemical compound of the non-metallic compound, in which it makes a popular layering for electrical cables to prevent unnecessary fleeing the flow.

Answer:

The answer is "brittle,  dense, and electrically insulating"

Explanation:

   Drive only when needed. The best way to reduce the fuel consumption is to simply drive your car less. Drive your car only when you really need to. If you only need to travel a few blocks, consider walking or even riding a bicycle. Not only will you save money at the pump, the exercise will certainly do you some good

   Make sure the gas cap is on tight. One reason you may not be getting the mileage you expect is because there isn't as much gas in your tank as you think. 147 million gallons of gas were lost last year due to evaporation. Why did it evaporate? The gas cap was not on tight. So just make sure it is tight, and it will enable you to keep all the gas you pay for

   Avoid idling. When you do need to drive your car, make sure you avoid idling whenever possible. When your car is running, but not moving, your gas mileage is absolute zero. So if your car will remain stationary for more than a minute or so, switch the engine off. However, only do this when it is safe to do so

   Accelerate and break steadily. While driving, always apply steady and consistent pressure to your car's accelerator pedal. A heavy foot will always result in reduced gas mileage and poor fuel consumption

   Drive the speed limit. Always try to drive at or near the speed limit. The optimal traveling speed for every make and model vehicle is different. However, the faster you drive, the worse your gas mileage and fuel consumption will be. Drive as fast as you need to in order to maintain a safe driving speed. But, save highway driving speeds for the highway and not around town

   Coast when possible. Constantly accelerating and braking only wastes fuel and reduces your car's fuel consumption. So, whenever possible, coast and avoid burning excess fuel. This takes a little practice, but can be a great way to increase the fuel economy of your vehicle

   Use cruise control on the highways. Cruise control means that your car will be going at a constant velocity, which means there is no acceleration. No acceleration reduces the amount of work your engine does, and therefore it uses less gas. You should set your cruise control at the speed limit, because 55 miles per hour is the perfect speed for maximum fuel efficiency

   Make your car more aerodynamic. You can do so by removing the roof racks on top of the car, and also by decreasing the weight of the car by taking out unneeded items

   Keep the windows closed. The more aerodynamic your vehicle remains, the better your car's fuel efficiency. Keeping your windows down while driving creates more drag and wind resistance for your automobile. If you are driving at speeds of less than 35 mph, it is usually okay to keep the windows down. However, at higher speeds, you should keep the windows up order to reduce drag and improve fuel consumption

   Minimize air conditioning. There will be times, of course, when summer heat will cause you to use the air conditioning system. However, use the AC in moderation. If you need to choose between keeping your windows rolled down or using the AC at high speeds, use the air conditioning on a low setting

   Replace dirty air filters. Dirty air filters cause your car's engine to work much harder than it has to and always results in poor fuel economy. So, make sure you follow the manufacturer's recommendation for periodically changing out the air filter. A clean air filter allows your engine to perform more efficiently and also helps you save money at the pump

   Maintain proper tire inflation. Check your car owner's manual and always ensure your tires are inflated to the proper air pressure level. Improperly inflated tires can reduce your car's fuel economy by up to five percent in some cases. This is quite simply a complete waste of fuel and money

   Reduce weight in the vehicle. Get rid of any unnecessary items in your car's trunk or other areas of the vehicle. For every 100 pounds of weight in the vehicle, your car's fuel economy decreases by about one or two percent. By making sure your vehicle remains as light as possible, you can improve the fuel consumption of your vehicle and save money on your fuel bill

Sorry it's really long :P but hope this helped

Answer:

B

Explanation:

i think leter B it because

Answer:

left through diffusion!

Explanation:

Salt particles will diffuse and towards where it is less.

Answer:

left through diffusion

Explanation:

Answer: Model

Explanation: Did the quiz

Answer:

Does the nature of intermolecular forces present in different substance affect their boiling points?

Explanation:

In every scientific research there must be a dependent and an independent variable. These variables are easily deduced from the scientific question that is being investigated.

If a student is comparing the boiling points of different substances having different intermolecular forces, then his or her aim is to establish a relationship between the nature of intermolecular forces present (independent variable) and the observed boiling point of the substance (dependent variable).

This is aptly shown by the research question ' Does the nature of intermolecular forces present in different substance affect their boiling points?'

Options:

Is boiling point affected by the strength of particle attraction?

Is boiling point affected by the mass of the sample?

Is boiling point correlated to melting point?

Is boiling point the temperature at which a substance changes its state?

Explanation:

ADD THE OPTIONS PEOPLE OR YOU GET NON RELATED AWNSERS LIKE THE ONE ABOVE

Answer:

1

Explanation:

1 represents the element, Hydrogen

It has 1 shell/electron

Because hydrogen has only the one electron/shell, it can also lose that electron/shell to form a completely empty n = 1 shell.

Answer:

This question appears incomplete but generally the answer is NO

Explanation:

Observation of the contents of an unlabeled jar depends solely on some of the physical properties of the content which is not good enough when identifying the contents of an unlabeled jar. This is because several substances have the same physical properties. For example, water and several acidic solutions appear the same in terms of colour and viscosity. Hence, a jar of water and a jar of hydrochloric acid cannot be differentiated by mere observation but with the use of litmus paper.

And a solution of hydrochloric acid and sulphuric acid cannot be differentiated by observation alone except a jar ammonia is brought close to the two jars (the one with hydrochloric acid will form a white fume with ammonia); hence relying on the chemical properties of both substances.

NOTE: Observation is done through sight, smell, feel, sound and taste without relying on another procedure/analysis to determine them.

Answer:

1. The particles move freely in gaseous forms.

2. They are closest in the solid form.

3 SOLID

 - They are very closed with each other and are mostly non-living things and hard things.

-They are very hard to break

-Examples Table, chair etc

Gaseous

-They are very freely and are not packed

-They are mostly in gas and are in many forms.

- Examples : Hydrogen, Oxygen etc

Answer:

it depends on the medium and the temperature

Explanation:

The speed of the sound wave has been majorly dependent on temperature and medium of propagation.

Speed can be defined as the distance traveled by the wave in a unit of time. The speed is a scalar quantity and has been independent of the direction.

The speed has been dependent on the medium of propagation of the wave, The transmission has been the transfer of sound energy, the medium with compact structure has been consisted of the higher speed with the medium having distinct particles.

The speed is also dependent on the temperature as the higher temperature has fast vibrating molecules and higher speed, while lower temperature has slow-moving molecules and lesser speed.

The speed of the sound wave has been majorly dependent on temperature and medium of propagation.

For more information about the speed of the sound wave, refer to the link:

https://brainly.com/question/15685413

Answer:

350 J

Explanation:

The law of conservation of energy states that energy can neither be created nor destroyed but can only be converted from one form to another. This means that in a system, energy is not lost.

In this question, an unlit match contains approximately 1,000 J of chemical energy. When lit, thermal and light energy are emitted i.e. it gets converted to light and heat energy. If the thermal energy emitted was measured to be 400J, and the remaining match still contains 250J of chemical energy, then:

The amount of light energy emitted will be:

Total chemical energy (1000J) - {Remaining chemical energy (250J) + emitted thermal energy (400J)}

= 1000 - (400 + 250)

= 1000 - 650

= 350

Hence, the amount of light energy emitted is 350J

Note that, the amount of energy converted (thermal and light) and remaining chemical energy still equates the total chemical energy in the match.

Answer:

4.14516129 g/mL

Explanation:

The density can be found with the following formula.

[tex]d= \frac{m}{v}[/tex]

where [tex]m[/tex] is the mass and [tex]v[/tex] is the volume.

We know the mass is 25.7 grams. We must find the volume.

The volume is equal to the volume of water that is displaced. Subtract the initial volume from the final volume.

⇒ final volume - initial volume

The initial volume is 35.5 mL and the final volume is 41.7 mL.

⇒ 41.7 mL - 35.5 mL

⇒ 6.2 mL

The volume of the aluminum piece is 6.2 mL.

Now we know the mass and the volume.

[tex]m= 25.7 g\\v=6.2 mL[/tex]

Substitute the values into the formula.

[tex]d=\frac{m}{v}[/tex]

[tex]d=\frac{25.7 g}{6.2 mL}[/tex]

[tex]d=4.14516129 g/mL[/tex]

The density of the aluminum sample is 4.14516129 g/mL

Given :

Volume of water , V = 63 ml .

To Find :

The volume of the water in [tex]dm^3[/tex] .

Solution :

We know , 1 ml of water is equal to [tex]1 \ cm^3[/tex] .

So , 63 ml of water is :

[tex]V=63 \ cm^3[/tex]     .... equation 1 .

Now , 1 cm = 0.1 dm

Putting value of 1 cm in equation 1 .

We get ,

[tex]V=63\times (0.1\ dm)^3\\V=63\times 10^{-3}\ dm^3\\V=6.3\times 10^{-2}\ dm^3[/tex]

Therefore , the volume of 63 ml water in [tex]dm^3[/tex] is [tex]6.3\times 10^{-2}\ dm^3[/tex] .

Hence , this is the required solution .