How does energy from Earth’s interior affect surface changes?

Answer and Explanation:

The chemical formula for cobalt(II) bromide is CoBr₂. As it is a strong electrolyte, it dissociates into ions when dissolved in water, according to the following chemical equation:

CoBr₂(s) → Co²⁺(aq) + 2 Br⁻(aq)

Thus, the compound CoBr₂ dissociates in water producing 1 mole of cobalt(II) ions (Co²⁺) and 2 moles of bromide ions (Br⁻) per mole of CoBr₂. The ions are dissolved in water, so they are in the aqueous state (aq).

Answer:

17 mc/L

Explanation:

We habe heat that is taken by the ice for it to melt to be equal to the heat given by water.

ML = mc(290K - 273K)

ML = mc 17

Then we divide through by L

M = 17 mc/L

Please note that 273k as we have used in thIs solution is the temperature at which we can have water to freeze

Therefore the minimum mass of required ice = 17 mc/L

Answer:

I

Explanation:

d

k

uhm....is there anything you need help with?

Answer:

Here's the Sample Response: The reactants and products determine the type of chemical reaction. If there are more products than reactants, then it is a decomposition reaction. If there are more reactants than products, it is a synthesis reaction. If oxygen is a part of the reactant, it is a combustion reaction. If one ion replaces another, it is a single replacement reaction. If there are two compounds in a reactant where cations switch, it is a double replacement reaction.

Explanation:

Answer:

Following are the difference in homolytic and hetrolytic bond dissociation.

Energy released during Homolytic fission is lower than the Hetrolytic fission as the electron distribution to its fragments is uniform in homolytic whereas electron distribution to its fragments is uniform in hetrolytic fission.

Thus bonds form in hetrolytic fission is more stronger than the the bonds formed in homolytic fission.

Hence, more energy is required to break the bonds of hetrolytic fission as compared to homolytic fission

Thus, homolytic dissociation energy of H-H (104 KJ/mol) is lower than its heterolytic bond dissociation energy (401 KJ/mol)

Answer:

0.0344 moles and 1.93g.

Explanation:

Molarity is defined as the ratio between moles of a solute (In this case, KOH), and the volume. With molarity and volume we can solve the moles of solute. With moles of solute we can find mass of the solute as follows:

Moles KOH:

15.2mL = 0.0152L * (2.26mol / L) = 0.0344moles

Mass KOH:

0.0344 moles * (56.11g/mol) = 1.93g of KOH

Explanation:

10.0mg / 1.25mg = 8

1/8 of the original mass => 3 half-life phases

Hence it will take 25.0 min * 3 = 75.0min.

Answer:

Percent yield = 94.5%

Explanation:

Given data:

Number of moles of hydrogen = 4.55 mol

Mass of ammonia recovered = 48.7 g

Percent yield of ammonia = ?

Solution:

Chemical equation:

N₂+ 3H₂    →       2NH₃

Now we will compare the moles of ammonia and hydrogen.

               H₂        :         NH₃

                3         :          2

                4.55   :         2/3×4.55 = 3.03 mol

Theoretical yield of ammonia:

Mass = number of moles × molar mass

Mass = 3.03 mol × 17 g/mol

Mass = 51.51 g

Percent yield:

Percent yield = ( actual yield / theoretical yield ) × 100

Percent yield = (48.7 g/ 51.51 g)  × 100

Percent yield = 0.945 × 100

Percent yield = 94.5%

Answer:

Ok:

Explanation:

a) 2-fluoropropane

b) 2,3 dichlorobutane

c) pent-2-ene or 2 pentene (I assume the semicolon was a typo)

d) Same as c (I assume Z is a typo too)

e) non-1-ene or 1-nonene (I assume the B is a 2)

Answer:

Most similar- oxygen

Least similar- sodium

Explanation:

The complete question is shown in the image attached.

Now let us consider all the options in the questions carefully. We do know that hydrogen forms  covalent bonds with sulphur. Two hydrogen atoms form form two polar covalent bonds with one sulphur atom. The molecule is bent owing to the presence of two lone pairs of electrons on the sulphur central atom.

Oxygen is in the same group as sulphur in the periodic table. The compound between hydrogen and sulphur is strikingly similar to the compound formed between sulphur and hydrogen due to chemical similarity of compounds of elements in the same group of the periodic table. Hence H2O bears the greatest similarity to H2S.

The bond between hydrogen and halogens is also polar covalent but less similar to the bond between sulphur and hydrogen.

Lastly, the bond between hydrogen and sodium is ionic and least similar to the bond between hydrogen and sulpur. We actually have in that compound, Na^+ H^-. Sodium transfers one electron to hydrogen as is implied in the ionic formula shown.

Hence the answer above.

Answer:

mass of HNO₃ = 0.378 g

Explanation:

Normality = Molarity * number of equivalents

Molarity = Normality/number of equivalents

normality of HNO₃ = 0.30 N, Volume = 20 mL

HNO₃ ionizes in the following way:

HNO₃(aq) ----> H⁺ + NO₃⁻

Therefore, number of equivalents for HNO₃ is 1

molarity of HNO₃ = 0.30/1 =0.30 mol/dm³

Using the formula, molarity = number of moles/volume in liters

number of moles = molarity * volume

Number of moles of HNO₃ = 0.30 mol/dm³ * 20ml * 1 dm³ /1000 mL

number of moles = 0.006 moles

From the formula, mass = number of moles * molar mass

molar mass of HNO₃ = 63.0 g/mol

mass = 0.006 * 63

mass of HNO₃ = 0.378 g

Answer:

[tex]c=0.2\ J/g^{\circ} C[/tex]

Explanation:

Given that,

Mass of a glass, m = 4 g

Initial temperature, [tex]T_i=5^{\circ} C[/tex]

Final temperature, [tex]T_f=45^{\circ} C[/tex]

Heat absorbed, Q = 32 J

We need to find the specific heat of the glass. The formula for the heat absorbed is given by :

[tex]Q=mc\Delta T\\\\c=\dfrac{Q}{m\Delta T}\\\\c=\dfrac{32\ J}{4\ g\times (45-5)^{\circ} C}\\\\=0.2\ J/g^{\circ} C[/tex]

So, the required specific heat of the glass is [tex]0.2\ J/g^{\circ} C[/tex].

To solve this we must be knowing each and every concept related to force. Therefore, the  objects motion will be towards downward with a force of 5 N.

A force is an outside entity that has the power to alter a body's state of rest or motion. It has a direction and a magnitude. The point where forces are applied is determined by the the force's direction as well as the application of the force.

Newton and dyne units are used to measure the force exerted on an item. When using the centimeter kilogram second system of units, force is measured in dynes (CGS unit). In the common international system of units, it is denoted by the letter Newton (N) (SI unit).

upward force=5 N

downward force= 10 N

total force acting on body=downward force-upward force

                                          = 10 N - 5 N

                                          =5 N downward force

The  objects motion will be towards downward with a force of 5 N.

Therefore, the  objects motion will be towards downward with a force of 5 N.

To learn more about force, here:

https://brainly.com/question/13014979

#SPJ5

Answer:

It's false

Explanation:

Mixtures are always combinations of the same compounds that are at different states.

Answer:

- P in PBr3 is +3.

- N in N2 is 0.

- As in H3AsO4 is +5.

Explanation:

Hello!

In this case, since the determination of the oxidation states is performed by using the well-known charge balances, we can proceed as shown below:

- P in PBr3: Here, bromide ions have an oxidation state of -1, so we follow:

[tex]P^xBr_3^-\\\\x-3=0\\\\x=+3[/tex]

Thus, the oxidation state is +3.

- N in N2: Here, since nitrogen is bonding with nitrogen and it is neutral, we infer its oxidation state is 0.

- As in H3AsO4: Here, oxygen is -2 and hydrogen +1, so we follow:

[tex]H_3^+As^xO_4^{-2}\\\\3+x-8=0\\\\x=8-3\\\\x=5[/tex]

Thus, the oxidation state is +5.

Best regards!

Answer:

a. 1-fluoro-3,3,4-trimethyl-pentane.

b. 1-iodo-3-ethyl-2-methyl-hexane.

c. 1,3-dichloro-5-dimethyl-hexane.

d. 1-bromo-3-methyl-cyclopentane.

Explanation:

Hello!

In this case, according to the IUPAC rules for the listed alkyl halides, we first need to name the halogens (considering periodic order) then alkyl radicals and finally the parent chain; thus, the names are given below:

a. 1-fluoro-3,3,4-trimethyl-pentane.

b. 1-iodo-3-ethyl-2-methyl-hexane.

c. 1,3-dichloro-5-dimethyl-hexane.

d. 1-bromo-3-methyl-cyclopentane.

e. 5-chloro-1-bromo-1,1,5-trimethyl-pentane (radicals are not clear).

Best regards!

This seems like more of a you thing, but give me brainliest anyways. >:D

Answer:

D. offering medical benefits to humans, protecting beaches, supporting a variety of organisms

Explanation:

I took the test and put C and got it wrong and l went back to see what the correct answer as and it was D.

Answer:

fructose

Explanation:

because fructose is a ketonic sugar.

Answer:

D.organism

Explanation:

A fungus from the kingdom fungi is an organism

Answer:

D. organism

......................

Answer:

6.022 x 10²³ electrons

Explanation:

If a cell is placed in an isotonic solution, there will be no net flow of water into or out of the cell, and the cell's volume will remain stable. If the solute concentration outside the cell is the same as inside the cell, and the solutes cannot cross the membrane, then that solution is isotonic to the cell.

Answer:

it's answer is lithium and boron.

Answer: B: Base

Explanation: I took the test

Answer: The possible molecular formula will be [tex]CO_2[/tex]

Explanation:

Mass of C= 27.3 g

Mass of O = 72.7 g

Step 1 : convert given masses into moles.

Moles of C =[tex]\frac{\text{ given mass of C}}{\text{ molar mass of C}}= \frac{27.3g}{12g/mole}=2.275moles[/tex]

Moles of O =[tex]\frac{\text{ given mass of O}}{\text{ molar mass of O}}= \frac{72.7g}{16g/mole}=4.544moles[/tex]

Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.

For C = [tex]\frac{2.275}{2.275}=1[/tex]

For O =[tex]\frac{4.544}{2.275}=2[/tex]

The ratio of C : O = 1: 2

Hence the empirical formula is [tex]CO_2[/tex]

The possible molecular formula will be=[tex]n\times CO_2[/tex]

Answer:

480 mins

Explanation: