hey what's the answer ?

[tex] \sqrt{36 \times 2 \times 2 \times 3 \times 3} [/tex]
​

Answer:

69

Step-by-step explanation:

lol

Given: If x=6, what is the smallest natural number y that makes x2+y2 rational .

To Find: Smallest value if y so that the expression is rational .

Solution : On substituting x = 6 , we have

[tex]=> x^2+y^2= 6^2+y^2\\\\ x^2+y^2= 36+y^2[/tex]

Now for the whole expression has minimum value y^2 should be minimum , also y should be natural no. The set of Natural no. is ,

[tex]=> N=\{ 1,2,3,4,... ..,\infty\}[/tex]

Therefore the smallest Natural no. is 1 . Therefore minimum value of y is 1.

The minimum value of y is 1.

The auction rule you mentioned is known as the "Vickrey-Clarke-Groves" (VCG) auction. In the VCG auction, the highest bidder wins the object but pays the externality they impose on others.

The payment made by the highest bidder is equal to the difference between the social cost with them participating and the social cost without them participating.

In the case of a single object auction with n potential buyers, the VCG auction proceeds as follows:

This payment rule ensures that the winner pays the externality they impose on others, which incentivizes truthful bidding. In other words, it encourages buyers to bid their true valuations because bidding higher or lower than their true valuation would not affect the outcome of the auction but could impact their payment.

The VCG auction is a theoretical construct and may not be practically implemented in all scenarios due to various complexities and practical considerations. However, it serves as a benchmark for understanding desirable properties of auction mechanisms, such as efficiency and truthfulness.

To learn more about auction rule visit:

brainly.com/question/17214727

#SPJ1

Answer:

I've put the red dot where location is.

Step-by-step explanation:

The task involves analyzing a directed graph and performing several operations related to relations and degrees of vertices. We need to list the ordered pairs of the relation, find the matrix of the relation, and determine the in-degree and out-degree of each vertex in the graph.

(a) To list the ordered pairs of the relation, R, we examine the directed edges in the graph. For each edge, we write down the corresponding ordered pair. For example, if there is an edge from vertex A to vertex B, we write (A, B). By listing all the directed edges in the graph, we obtain the ordered pairs of the relation, R.

(b) To find the matrix of the relation, MR, we use the vertices of the graph as rows and columns. If there is a directed edge from vertex i to vertex j, we place a 1 in the (i, j) entry of the matrix; otherwise, we place a 0. By examining the directed edges in the graph and filling in the matrix accordingly, we obtain the matrix of the relation, MR.

(c) To determine the in-degree and out-degree of each vertex, we count the number of incoming and outgoing edges for each vertex, respectively. The in-degree of a vertex represents the number of edges pointing towards it, while the out-degree represents the number of edges originating from it. By counting the incoming and outgoing edges for each vertex in the graph, we can determine their respective in-degrees and out-degrees.

Performing these operations will provide the necessary information about the relation and degrees of the vertices in the given directed graph.

Learn more about matrix here:

https://brainly.com/question/28180105

#SPJ11

Answer:

The volume of the cube is 46.87 in^3

Step-by-step explanation:

V=6A3/2

36=6·783/2

36≈46.87217in³

your answer should be 3 :)

Answer:

If they hadn't stopped at the gas station and had driven along the diagonal path, their trip would have been 12 miles shorter.

Step-by-step explanation:

Given that Gigi's Family left their house and drove 14 miles south to a gas station and then 48 miles east to a waterpark, to determine how much shorter would their trip to the waterpark have been if they hadn't stopped at the gas station and had driven along the diagonal path instead the following calculation must be performed, using the Pythagorean theorem:

14 ^ 2 + 48 ^ 2 = X ^ 2

196 + 2,304 = X ^ 2

√ 2500 = X

50 = X

14 + 48 - 50 = X

62 - 50 = X

Thus, if they hadn't stopped at the gas station and had driven along the diagonal path, their trip would have been 12 miles shorter.

Answer:

x=20

Step-by-step explanation:

We know that a line is 180 degrees, and the base of the cemi-circle is a line. So,  we would have:

x+7x+x=180

9x=180

x=20

Hope this helps!!

Answer:

x = 20

Step-by-step explanation:

x + 7x + x = 180

9x = 180

x = 20

Answer:

The polynomial must be added by 2.25 on each side of the equation.

Step-by-step explanation:

Let [tex]x^{2}-3\cdot x +20 = 0[/tex], we need to add each side by 2.25 to complete the square, that is, expanding the polynomial so that factor of a perfect square trinomial can be done:

1) [tex]x^{2}-3\cdot x +20 = 0[/tex] Given

2) [tex](x^{2}-3\cdot x +20) +2.25 = 2.25 + 0[/tex] Compatibility with addition/Commutative property

3) [tex](x^{2}-3\cdot x +2.25) +20 = 2.25[/tex] Commutative, associative and modulative properties.

4) [tex](x-1.5)^{2} +20 = 2.25[/tex] Perfect square trinomial/Result

Answer:

(x−21​)^2=81/4

Answer:

A (2,-1)

Step-by-step explanation:

-1 = 3(2) -7

5(2) - (-1) = 11

Answer:

D and E

Step-by-step explanation:

remote interior angles are not adjacent to a given angle. or basically 1 is our exterior angle, so the opposites of 1 and the remote interior angle.

The remote interior angles of Z1 are ∠4 and ∠3. The correct options are D and E.

A triangle's remote interior angles are the two angles that are not adjacent to a given exterior angle. An exterior angle of a triangle is formed by extending one of the triangle's sides.

The following theorem can be used to calculate the remote interior angles of a triangle:

A triangle's remote interior angles are equal in size to the exterior angle that is not adjacent to them.

In other words, if we know the measure of one of a triangle's exterior angles, we can find the measure of the distant interior angles by subtracting that measure from 180 degrees.

Thus, the correct options are D and E.

For more details regarding angles, visit:

https://brainly.com/question/28451077

#SPJ7

Answer:

the answer is B.........................

The statements with symbolic notation using the given predicates logic are:

1. Nothing strictly physical has consciousness. ∀x(Px → ¬Cx)

2. Minds exist. ∃x(Mx)

3. All minds have consciousness and subjectivity. ∀x(Mx → (Cx ∧ Sx))

4. No minds are strictly physical things. ∀x(Mx → ¬Px)

Predicate logic is a formal system of symbolic logic that extends propositional logic by introducing variables, predicates, quantifiers, and quantified statements. It allows for the representation and manipulation of relationships between objects, properties, and relations.

In predicate logic, symbols are used to represent various components:

1. Variables: Variables are used to represent individual elements or objects in a domain of discourse. They are typically denoted by lowercase letters such as x, y, z, and so on.

2. Predicates: Predicates are used to express properties or relations between objects. They are represented by uppercase letters followed by parentheses, such as P(x), Q(x, y), R(x, y, z), where x, y, z are variables.

3. Quantifiers: Quantifiers are used to express the scope of variables in a logical statement. The two main quantifiers are:

- Universal quantifier (∀): It is used to express that a statement holds for all elements in the domain. For example, ∀x P(x) means "For all x, P(x)."

- Existential quantifier (∃): It is used to express that there exists at least one element in the domain for which a statement holds. For example, ∃x P(x) means "There exists an x such that P(x)."

4. Logical symbols: Predicate logic uses logical symbols to represent logical connectives, negation, implication, and equivalence. The main logical symbols are:

- Conjunction (∧): Represents logical "and."

- Disjunction (∨): Represents logical "or."

- Negation (¬): Represents logical "not."

- Implication (→): Represents logical "if-then."

- Equivalence (↔): Represents logical "if and only if."

These symbols are used to construct complex logical statements by combining predicates, variables, and quantifiers. The goal is to provide a precise and formal language for reasoning about relationships and properties within a domain of discourse.

learn more about predicate logic: https://brainly.com/question/14914987

#SPJ4

Regression analysis is a statistical technique used to examine the relationship between a dependent variable (Y) and one or more independent variables (X). This analysis is used to establish whether the dependent variable is affected by changes in the independent variables.

When performing regression analysis, we use various terms such as deterministic, stochastic, and least squares. Let us examine these terms and their implications in regression analysis:

Deterministic regression

Deterministic regression is a type of regression that assumes a perfect relationship between the dependent and independent variables. This type of regression analysis assumes that the independent variables have a direct linear relationship with the dependent variable. The regression equation in deterministic regression is of the form: Y=a + bX. The term a is the Y-intercept of the regression line, while b represents the slope of the regression line. A change in the value of X by one unit will result in a change in Y by b units.

Stochastic regression

Stochastic regression is a type of regression that assumes a probabilistic relationship between the dependent and independent variables. In this type of regression, the independent variable is considered to be random. The relationship between the dependent and independent variables is not perfect, but it is characterized by some random error. The regression equation in stochastic regression is of the form: Y=a + bX + ε. The term ε represents the error term in the regression equation. The error term is a random variable that represents the difference between the predicted value and the actual value.

Least squares regression

Least squares regression is a statistical method that is used to estimate the parameters of a linear regression model. This method aims to find the line of best fit for the given data set. The line of best fit is the line that minimizes the sum of the squared residuals. The residuals are the differences between the observed values and the predicted values. The least squares regression method is used in both deterministic and stochastic regressions. This method ensures that the regression line passes as close as possible to all the data points. This method can be used to estimate the values of the parameters a and b in the regression equation Y=a + bX. In conclusion, the terms deterministic, stochastic, and least squares are used in regression analysis to explain the relationship between the dependent and independent variables. These terms are crucial in regression analysis because they help us to understand the nature of the relationship between the variables.

To know more about deterministic,

https://brainly.com/question/31386121

#SPJ11

The solution to the system of differential equations dx/dt = [[3, 9], [-1, -3]]x with x(0) = [[2], [4]] is x = [[6cos(2t)], [2cos(2t)]].

To solve the system of differential equations dx/dt = [[3, 9], [-1, -3]]x with x(0) = [[2], [4]], we can use the eigenvalue method. The matrix [[3, 9], [-1, -3]] has eigenvalues λ₁ = 2 and λ₂ = -2, with corresponding eigenvectors v₁ = [[3], [1]] and v₂ = [[3], [-1]].

Let's denote x = [[x₁], [x₂]]. Using the eigenvectors, we can write x as a linear combination of the eigenvectors: [tex]\[x = c_1 \mathbf{v}_1 e^{\lambda_1 t} + c_2 \mathbf{v}_2 e^{\lambda_2 t}\][/tex], where c₁ and c₂ are constants to be determined.

Using the given initial condition x(0) = [[2], [4]], we have:

[[2], [4]] = c₁[[3], [1]] + c₂[[3], [-1]]

Solving this system of equations, we find c₁ = 2 and c₂ = 0.

Thus, the solution to the system of differential equations is:

[tex]\[x = 2 \begin{bmatrix} 3 \\ 1 \end{bmatrix} e^{2t}\][/tex]

In real form, we can expand the exponential term using Euler's formula: e^(2t) = cos(2t) + i sin(2t). So the solution becomes:

x = [[6cos(2t)], [2cos(2t)]]

In real form, the solution is x₁ = 6cos(2t) and x₂ = 2cos(2t).

For more such questions on differential equations

https://brainly.com/question/2273154

#SPJ8

Introduction

In mathematics, a function is a relation between two sets of values, usually denoted as a set of input values and a set of output values. One of the important aspects of a function is its vertex, which is the highest or lowest point in a graph, depending on the specific type of function. The size and position of a graph’s vertex can be important when studying the properties of a function. In this paper, we will discuss three statements about a function and determine whether or not each statement is true.

Statement 1: The vertex of the function is at (–4,–15).

The first statement being discussed is that the vertex of the function is at (–4,–15). This statement is true. By looking at the graph of the function, it can be seen that the vertex of the function is indeed located at the point (–4,–15). At this point, the graph reaches its highest or lowest point.

Statement 2: The vertex of the function is at (–3,–16).

The second statement being discussed is that the vertex of the function is at (–3,–16). Unfortunately, this statement is false. By looking at the graph of the function, it can be seen that the vertex of the function is actually located at (–4,–15). The vertex is not located at (–3,–16).

Statement 3: The graph is increasing on the interval x > –3.

The third statement being discussed is that the graph is increasing on the interval x > –3. This statement is true. By looking at the graph, it can be seen that the graph is indeed increasing on the interval x > –3. On this interval, the y-values increase as the x-values increase.

Statement 4: The graph is positive only on the intervals where x < –7 and where x > 1.

The fourth statement being discussed is that the graph is positive only on the intervals where x < –7 and where x > 1. This statement is true. By looking at the graph, it can be seen that the graph is positive only on the intervals where x < –7 and where x > 1. On these intervals, the y-values are greater than 0.

Statement 5: The graph is negative on the interval x < –4.

The fifth statement being discussed is that the graph is negative on the interval x < –4. This statement is also true. By looking at the graph, it can be seen that the graph is indeed negative on the interval x < –4. On this interval, the y-values are less than 0.

Conclusion

In this paper, we discussed three statements about a function and determined whether or not each statement was true. We found that the first statement, that the vertex of the function is at (–4,–15), is true. We also found that the second statement, that the vertex of the function is at (–3,–16), is false. Furthermore, we found that the third, fourth, and fifth statements, that the graph is increasing on the interval x > –3, that the graph is positive only on the intervals where x < –7 and where x > 1, and that the graph is negative on the interval x < –4, respectively, are all true.

The airline can say with 95% confidence that the maximum error in using x = 24.15 minutes as an estimate of the true average time is 24.736.

To calculate the confidence interval, we used the following formula:

CI = x ± z × SE.

CI is the confidence interval

x is the sample mean

z is the z-score for the desired confidence level (in this case, 95%)

SE is the standard error of the mean

The z-score for a 95% confidence interval is 1.95. ⇒ 0.05/2 = 0.025 = 1.95.

the sample standard deviation is 3.29 and the sample size is 120.

Therefore

CI = 24.15 + 1.95 × 3.29 / √(120) = 24.736

Find more exercises on confidence level;

https://brainly.com/question/22851322

#SPJ1

ƒ'(z)|z|=3 f(z) = -20160The function is given as f(z) = 2³ (z - 2)² (z+5)³ (z + 1)³(z − 1)4³ and we need to evaluate ƒ'(z) |z| =3 f(z).

The value of f'(z) is found by differentiating f(z) with respect to z. Using the product rule of differentiation, we have;ƒ(z) = 2³ (z - 2)² (z+5)³ (z + 1)³(z − 1)4³Now, ƒ'(z) = [2³ * 2(z - 2) * (z+5)³ (z + 1)³(z − 1)4³] + [2³ (z - 2)² * 3(z+5)² (z + 1)³(z − 1)4³] + [2³ (z - 2)² (z+5)³ * 3(z + 1)² (z − 1)4³] + [2³ (z - 2)² (z+5)³ (z + 1)³ * 4(z − 1)³]Now, substitute |z| = 3 and evaluate.ƒ'(z)|z|=3 f(z) = -20160Thus, the value of ƒ'(z)|z|=3 f(z) is -20160. The derivative of the given function is calculated using the product rule of differentiation. The result is then substituted with |z| = 3 and evaluated.

Know more about product rule of differentiation here:

https://brainly.com/question/28993079

#SPJ11

Tthe general solution to the differential equation is given by y = (1+x)^2C, where C is any real number.

The given differential equation is (1+x)dy - 2ydx = 0. To find the general solution, we can rearrange the equation as dy/dx = 2y/(1+x) and separate the variables, yielding (1/y)dy = (2/(1+x))dx. Integrating both sides gives us ln|y| = 2ln|1+x| + C, where C is the constant of integration. Simplifying further, we get ln|y| = ln|(1+x)^2| + C, which can be rewritten as ln|y| = ln|((1+x)^2e^C)|. By taking the exponential of both sides, we obtain y = (1+x)^2e^C, where C is an arbitrary constant.

In this differential equation, we initially rearrange it and separate the variables to obtain dy/dx = 2y/(1+x). Then, we integrate both sides, resulting in ln|y| = 2ln|1+x| + C. We simplify further by exponentiating both sides, which leads to y = (1+x)^2e^C. The constant of integration, C, is absorbed into a new constant, let's say C' = e^C. Therefore, the general solution to the differential equation is y = (1+x)^2C', where C' represents any real number.

This solution represents a family of curves that satisfy the original differential equation, and different values of C' will give different curves within this family.

Learn more equation here:

https://brainly.com/question/29657983

#SPJ11

Answer:

60 delivery vans

Step-by-step explanation:

Smaller company:

Pickup truck : delivery van = 3 : 4

If the larger company has 45 pickup trucks

Let x = number of delivery vans

Larger company:

Pickup truck : delivery van = 45 : x

Equate both ratios

3 : 4 = 45 : x

3/4 = 45/x

Cross product

3 * x = 4 * 45

3x = 180

x = 180/3

x = 60

x = number of delivery vans = 60

Answer:

24 cm long

Step-by-step explanation:

The null hypothesis will be rejected if the test statistic is smaller than the critical value at a given significance level. The following hypotheses to be tested are:

H0: Population 1 = Population 2

H1: Population 1 < Population 2

Null hypothesis: Population 1 and Population 2 are not significantly different in their distributions of observations.

Alternative hypothesis: Population 1 is shifted to the left of Population 2 in their distributions of observations. This is a one-tailed test. Thus, the null hypothesis will be rejected if the test statistic is smaller than the critical value at a given significance level.

Therefore, the following hypotheses are to be tested:

H0: Population 1 = Population 2

H1: Population 1 < Population 2

The null hypothesis is a fundamental concept in statistical hypothesis testing. It is a statement that assumes there is no significant relationship between two variables or no difference between two groups being compared. The null hypothesis is often denoted as H0.

In simpler terms, the null hypothesis suggests that any observed differences or relationships in a study are due to random chance or sampling error rather than a genuine effect. It serves as a basis for comparison against an alternative hypothesis, which proposes a specific relationship or difference.

To conduct a hypothesis test, researchers typically formulate a null hypothesis and an alternative hypothesis. The alternative hypothesis (denoted as Ha or H1) represents the claim they want to support or prove. The null hypothesis, on the other hand, assumes that the alternative hypothesis is false or not valid.

To know more about null hypothesis, visit the link : https://brainly.com/question/4436370

#SPJ11

16 because o.25 times 16 = 4

1.76+2.29=4.05 so 16

Answer:

16.

Step-by-step explanation:

0.25 × 16 = 4

1.76 + 2.29 = 4.05

so the answer is 16

hope this helps!

~mina-san

Answer:

0.03333333333 = 33/1000 = 3.3%

Step-by-step explanation:

Answer:

30

Step-by-step explanation:

It will take the new guy approximately 3.33 hours to finish your car.To find out how long it will take the new mechanic to finish the car, we need to consider their individual rates of work.

Let's denote the first mechanic's rate as "M1" (job per hour) and the new guy's rate as "M2" (job per hour).

We are given that M1 can complete the job in six hours, so his rate of work is 1/6 of the job per hour. Similarly, the new guy takes eight hours to complete the job, so his rate of work is 1/8 of the job per hour.

When they worked together for the first two hours, they combined their rates of work. So in the first two hours, they completed (2/6 + 2/8) of the job.

Now, the first mechanic leaves and only the new guy is left to finish the remaining portion of the job. Let's denote the time it takes for the new guy to complete the remaining portion as "T."

Since we know the portion of the job completed in the first two hours, we can set up the equation: (2/6 + 2/8) + (T/8) = 1.

Simplifying the equation, we have (8/24 + 6/24) + (T/8) = 1.

Combining the fractions, we get 14/24 + (T/8) = 1.

Subtracting 14/24 from both sides, we have T/8 = 10/24.

Simplifying further, we find T = (10/24) * 8 = 3.33 hours.

For more such questions on rates

https://brainly.com/question/25720319

#SPJ8

(a) Type I error: Rejecting the claim , Type II error: Failing to reject the claim. (b) Type I error: Rejecting the claim, Type II error: Failing to reject the claim.

For claim (a):

Type I error: Rejecting the claim that the average time customers wait on hold is less than 5 minutes when, in fact, it is true. This means concluding that the average wait time is longer than 5 minutes when it is not.

Type II error: Failing to reject the claim that the average time customers wait on hold is less than 5 minutes when, in fact, it is false. This means concluding that the average wait time is less than 5 minutes when it is actually longer.

For claim (b):

Type I error: Rejecting the claim that the number of salespeople employed at a car lot is linearly correlated with the annual profit of the lot when, in fact, it is true. This means concluding that there is no linear correlation between the number of salespeople and annual profit when there actually is.

Type II error: Failing to reject the claim that the number of salespeople employed at a car lot is linearly correlated with the annual profit of the lot when, in fact, it is false. This means concluding that there is a linear correlation between the number of salespeople and annual profit when there actually isn't.

Learn more about correlation here:

https://brainly.com/question/16206377

#SPJ11