HELPPPPPPPPPPPPMEEEEEEEEEE

dont mind me here for the points

Answer:

See explanation

Explanation:

In writing the electron configuration of atoms, the core electrons are those electrons that occur in the inner shells. They do not participate in chemical reaction.

The valence electrons are those electrons that occur on the outermost shell of an atom and does participate in chemical reaction.

For Xe, the core electrons are; 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 4d10 while the valence electrons are; 5s25p6

For Ca, the core electrons are; 1s2 2s2 2p6 3s2 3p6 while the valence electrons are 4s2.

Hence, there are 18 core electrons and 2 valence electrons for Ca and 46 core electrons for Xe and 8 valence electrons

Answer:

4⁺

Explanation:

Germanium (Ge) has an atomic number of 32 and belongs to group 14 on the periodic table. Germanium has an electronic configuration of [Ar] 3d¹⁰ 4s² 4p². There exist 32 electrons in its neutral atom. In fluorescent lights, germanium is utilized as a component of both alloys and phosphorus.

The electrons in the atom's outer shell are known as its valence electrons.

Thus, at the ground state, the outer shell of the Germanium atom has 4 electrons.

Answer:

111.44 g

Explanation:

We'll begin by calculating the volume of the solvent. This can be obtained as follow:

Mass of solvent = 21 g

Density of solvent = 0.865 g/mL.

Volume of solvent =?

Density = mass /volume

0.865 = 21 /volume of solvent

Cross multiply

0.865 × volume of solvent = 21

Divide both side by 0.865

Volume of solvent = 21 / 0.865

Volume of solvent = 24.28 mL

Next, we shall determine the volume of the solid. This can be obtained as follow:

Volume of solvent + solid = 80.0 mL.

Volume of solvent = 24.28 mL

Volume of solid =?

Volume of solid = (Volume of solvent + solid) – (Volume of solvent)

Volume of solid = 80 – 24.28

Volume of solid = 55.72 mL

Finally, we shall determine the mass of the solid. This can be obtained as follow:

Density of solid = 2.00 g/mL.

Volume of solid = 55.72 mL

Mass of solid =.?

Density = mass / volume

2 = mass of solid / 55.72

Cross multiply

Mass of solid = 2 × 55.72

Mass of solid = 111.44 g

Therefore, the mass of the solid is 111.44 g

Various structures, or allotropes, of carbon, are precious stone, graphite, and fullerenes. In jewel, every carbon iota is attached to four other carbon iotas, shaping an unbending construction that makes precious stones hard.

Answer:

The chemical symbol for Bismuth is Bi. Electron Configuration and Oxidation States of Bismuth. Electron configuration of Bismuth is [Hg] 6p3. Possible oxidation states are +3,5.

Answer:

physical properties include melting point, boiling point, strength, and malleability.

Explanation:

Answer:

Metal properties.

Explanation:

metal has its fix point to melt and boil expect mercury because it doesn't have its own fix point of melting or boiling, strength- if metal is heated then it can be strength and we can give it shape by heating

Answer: The given electronic configuration is long hand notation.

Explanation:

Long-hand notation of representing electronic configuration is defined as the arrangement of total number of electrons that are present in an element.

Noble-gas notation of representing electronic configuration is defined as the arrangement of valence electrons in the element. The core electrons are represented as the previous noble gas of the element that is considered.

The given electronic configuration of potassium (K):  

The above configuration has all the electrons that are contained in the nucleus of an element. Thus, this configuration is a long-hand notation.

The question is incomplete, the complete question is;

49.9 g per day of a certain industrial waste chemical P arrives at a treatment plant settling pond with a volume of 300 m^3. P is destroyed by sunlight, and once in the pond it has a half-life of 3.4 h. Calculate the equilibrium concentration of P in the pond. Round your answer to 2 significant digits.

Answer:

0.034 g/m³

Explanation:

From the question, mass of industrial waste = 49.9 g

It takes 24 hours to complete a day.

Mass per hour;

Mass in = (49.9 g / day) * (1 day /24 hr )

= 2.079 g/hr

Mass out = 0

Mass leaving due to sunlight = k CA V

Half life of the industrial waste = 3.4 h

This is a first order reaction;

Hence;

k = ln2/t1/2

Where, t1/2 = half life

k = 0.693 / 3.4 = 0.2038 hr⁻¹

Mass leaving due to sunlight = k CA V

CA = Mass per hr / kV

= 2.079 g/hr / ( 0.2038 hr⁻¹ x 300 m³ )

= 0.034 g/m³

Answer: The volume of the gas is 178.76 L

Explanation:

The ideal gas equation is given as:

.......(1)

where

P = pressure of the gas = 675 torr

V = volume of gas = ?

n = number of moles of gas = 6.45 moles

R = Gas constant = 62.36 L.torr/mol.K

T = temperature of the gas = [tex]27^oC=[27+273]K=300K[/tex]

Putting values in equation 1, we get:

[tex]675torr\times V=6.45mol\times 62.36L.torr/mol.K\times 300K\\\\V=\frac{6.45\times 62.36\times 300}{675}=178.76 L[/tex]

Hence, the volume of the gas is 178.76 L

The question is incomplete, the complete question is:

A certain substance X has a normal freezing point of [tex]-6.4^oC[/tex] and a molal freezing point depression constant [tex]K_f= 3.96^oC.kg/mol[/tex]. A solution is prepared by dissolving some glycine in 950. g of X. This solution freezes at [tex]-13.6^oC[/tex]. Calculate the mass of urea that was dissolved. Round your answer to 2 significant digits.

Answer: 129.66 g of glycine will be dissolved.

Explanation:

Depression in the freezing point is the difference between the freezing point of the pure solvent and the freezing point of the solution.

The expression for the calculation of depression in freezing point is:

[tex]\text{Freezing point of pure solvent}-\text{freezing point of solution}=i\times K_f\times m[/tex]

                                 OR

[tex]\text{Freezing point of pure solvent}-\text{freezing point of solution}=i\times K_f\times \frac{\text{Given mass of solute}\times 1000}{\text{Molar mass of solute}\times \text{Mass of solvent (g)}}[/tex]        ....(1)

where,

i = Van't Hoff factor = 1 (for non-electrolytes)

Freezing point of pure solvent = [tex]-6.4^oC[/tex]

Freezing point of solution = [tex]-13.6^oC[/tex]

[tex]K_f[/tex] = freezing point depression constant  = [tex]3.96^oC/m[/tex]

[tex]M_{solute}[/tex] = Molar mass of solute (glycine) = 75.07 g/mol

[tex]w_{solvent}[/tex] = Mass of solvent = 950 g

Plugging values in equation 1:

[tex]-6.4-(-13.6)=1\times 3.96\times \frac{\text{Given mass of glycine}\times 1000}{75.07\times 950}\\\\\text{Given mass of glycine}=\frac{7.2\times 75.07\times 950}{1\times 3.96\times 1000}\\\\\text{Given mass of glycine}=129.66g[/tex]

Hence, 129.66 g of glycine will be dissolved.

Answer:

21.12 grams

Explanation:

Using the given number of hydrogen moles, we calculate the number of carbon atoms, keeping in mind that there are 3 carbon moles per hydrogen mol:

4.70 mol H * [tex]\frac{3molC}{8molH}[/tex] = 1.76 mol C

Finally we convert 1.76 moles of carbon into grams, using its molar mass:

1.76 mol * 12 g/mol = 21.12 g

Answer:

To convert 100.0 g of water at 20.0 °C to steam at 100.0 °C requires 259.5 kJ of energy. Let me know if this helped?

Answer: In the reaction:

a) The reactants are: P

b) The products are: M and N

Explanation:

The given reaction equation is as follows.

[tex]P \rightarrow M + N[/tex]

Reactants are the species present on the left side on an arrow in a chemical reaction equation.

On the other hand, products are the species which are present on the right side of an arrow in a chemical reaction equation.

Hence, in the given reaction equation P is the reactant. Whereas M and N are the products.

Thus, we can conclude that in the reaction:

a) The reactants are: P

b) The products are: M and N

Answer:

[tex]2.02gH_2[/tex]

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to to calculate the mass of hydrogen gas by firstly setting up the undergoing chemical reaction:

[tex]2H_3PO_4+3Ca\rightarrow Ca_3(PO_4)_2+3H_2[/tex]

Thus, we apply the following stoichiometric setup, whereas the atomic mass of calcium is 40.08 g/mol, that of hydrogen is 2.02 g/mol and the mole ratio of these two substances is 3:3:

[tex]40.08gCa*\frac{1molCa}{40.08gCa}*\frac{3molH_2}{3molCa}*\frac{2.02gH_2}{1molH_2} \\\\=2.02gH_2[/tex]

Regards!

Answer:

[Na₂CO₃] = 0.15 M

Explanation:

Molarity is a type of concentration.

It is useful for solutions, to say how many moles of solute are contained in 1L of solution.

We can also say, that molarity are the mmoles of solute in 1 mL of solution.

In this case, our solute is the Na₂CO₃.

We convert mass to moles: 0.79 g . 1 mol / 106g = 7.45×10⁻³ moles

We convert moles to mmoles:  7.45×10⁻³ mol . 1000 mmol / 1mol = 7.45 mmol

M = mmol / mL

M = 7.45 mmol / 50 mL = 0.15 M

Option A is the right answer.

Answer:

the name for NO is nitrogen monoxide

Answer:

D. burning wood

Explanation: It seems like the only logical answer

Tn chemical reaction, the energy is released is called as chemical energy. The burning wood releases the chemical energy. Therefore, option D is correct.

Chemical energy is the energy that is released when chemical substances engage in a chemical reaction and change into other substances. Batteries, food, and gas are a few examples of chemical energy storage mediums.

Chemical energy, such as that held in the bonds of atoms and molecules, is stored energy. As a result of a chemical process, this energy is released. A substance typically changes into an entirely different substance once its chemical energy has been released.

The body transforms the energy in meals into heat and mechanical energy. Additionally, coal's chemical energy is transformed into electrical energy in power plants. Last but not least, electrolysis is another way that the chemical energy in a battery might generate electricity.

Thus, option D is correct.

To learn more about chemical energy, follow the link;

https://brainly.com/question/7640132

#SPJ2

Answer:

Explanation:

Bromination of allylic compounds occurs when hydrogen atoms from neighboring double bonds are replaced. As a result, there are four (4) potential bromination products, as seen in the figure below.

NBS, also known as N-Bromo succinimide, is employed as a replacement for Br2 in certain instances. The benefit of NBS is that it produces a reduced level concentration for Br2, which means that bromination of the double bond isn't competitive. As soon as Br2 has been produced, the reaction continues in the same way as the remaining free-radical halogenation reactions.

Answer:

(Basic )

Real

These are formed in the front side of the mirror.

Virtual

These are assumed to be formed at the backside of the mirror.

Type of lens used

Converging(real)

Diverging(virtual)

Image reception

Image can be appeared on a screen.(Real)

Image appears to be on the mirror or lens itself.

Interaction of light rays Actual Imaginary(Virtual)

Appearance of image

Inverted(Real)

Erect(Virtual)

Formed by

Concave mirror and convex lens.(Real)

Plane, convex mirror and concave lens.(Virtual)

Example

Image on the theater screen.(Real)

Reflection of any object or body on plane mirror.(Virtual)

1 mole KOH give 1 mole KCl

so 12.5 will give 12.5 mole of KCl

we know that 1 mole of kcl is equal to 74 grams

so 12.5 mole have

12.5 × 74= 926 grams

Answer:

Let’s break down all the steps in the following SN1 reaction looking at the energy diagram: Step Breaking the C – LG bond. In this rate-determining step, a carbocation intermediateis formed: Step A nucleophilic attack.The carbocation is highly electron-deficient and the nucleophile attacks as a Lewis base usin…

Image

Explanation:

Explanation:

Neutralization is the reaction between an acid and a base, producing a salt and a neutralized base. A strong acid yields a weak conjugate base (A–), so a strong acid is also described as an acid whose conjugate base is a much weaker base than water.

Answer:

0.189 g

Explanation:

Step 1: Write the balanced equation

NCl₃ + 3 H₂O ⇒ NH₃ + 3 HCIO

Step 2: Calculate the moles corresponding to 1.33 g of NCl₃

The molar mass of NCl₃ is 120.36 g/mol.

1.33 g × 1 mol/120.36 g = 0.0111 mol

Step 3: Calculate the moles of NH₃ produced from 0.0111 moles of NCl₃

The molar ratio of NCl₃ to NH₃ is 1:1. The moles of NH₃ produced are 1/1 × 0.0111 mol = 0.0111 mol.

Step 4: Calculate the mass corresponding to 0.0111 moles of NH₃

The molar mass of NH₃ is 17.03 g/mol.

0.0111 mol × 17.03 g/mol = 0.189 g

Answer:

Fission reaction occurs.

Explanation:

When a radioactive atom undergoes a nuclear decay event, spontaneous fission reaction occurs, the decaying nucleus undergoes a transformation in  the change in the number of protons in the nucleus. The fission process produces gamma photons, and releases a very large amount of energy. After the radiation stops, a stable element is obtained whereas the energy is released in the surrounding.

Explanation:

Aromatic nitrogen bonded to hydrogen, as found in pyrrole must be represented as [nH] ; thus imidazole is written in SMILES notation as n1c[nH]cc1 . When aromatic atoms are singly bonded to each other, such as in biphenyl, a single bond must be shown explicitly: c1ccccc1-c2ccccc2 .

Answer:

53.2 mL

Explanation:

As this problem deals with the neutralization of a strong monoprotic acid and a strong base, we can solve it by using the following formula:

Where in this case:

We input the data:

And solve for Vb:

The question is incomplete, the complete question is:

When aqueous solutions of NaCl and [tex]Pb(NO_3)_2[/tex] are mixed, a solid forms. Determine the mass of solid formed when 140.7 mL of 0.1000 M NaCl is mixed with an excess of an aqueous solution of

Answer: The mass of lead chloride produced is 1.96 g

Explanation:

Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L. The formula used to calculate molarity:

[tex]\text{Molarity of solution}=\frac{\text{Moles of solute}\times 1000}{ \text{Volume of solution (mL)}}[/tex] .....(1)

Given values:

Molarity of NaCl = 0.1000 M

Volume of the solution = 140.7 mL

Putting values in equation 1, we get:

[tex]0.1000=\frac{\text{Moles of NaCl}\times 1000}{140.7}\\\\\text{Moles of NaCl}=\frac{0.1000\times 140.7}{1000}=0.01407mol[/tex]

The chemical equation for the reaction of NaCl and lead nitrate follows:

[tex]Pb(NO_3)_2(aq)+2NaCl(aq)\rightarrow PbCl_2(s)+2NaNO_3(aq)[/tex]

By the stoichiometry of the reaction:

If 2 moles of NaCl produces 1 mole of lead chloride

So, 0.01407 moles of NaCl will produce = [tex]\frac{1}{2}\times 0.01407=0.007035mol[/tex] of lead chloride

The number of moles is defined as the ratio of the mass of a substance to its molar mass.

The equation used is:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(2)

Molar mass of lead chloride = 278.1 g/mol

Plugging values in equation 2:

[tex]\text{Mass of lead chloride}=(0.007035mol\times 278.1g/mol)=1.96g[/tex]

Hence, the mass of lead chloride produced is 1.96 g