Answers
The electrode indicated is the cathode
The contents of the beaker are the electrolyte
Electrons flow from the cathode to the anode
Dilute sulfuric acid will give colorless gases at both electrodes
The electrodes used could be made from platinum since they are inert.
What is electrolysis?Electrolysis is a process of using an electric current to drive a non-spontaneous chemical reaction.
This involves the use of an electrolytic cell, where an external power source is used to drive a chemical reaction that would otherwise not occur.
During electrolysis, positive and negative ions move toward the electrodes (positively charged anode and negatively charged cathode) where they undergo oxidation and reduction reactions respectively.
The process is commonly used in the production of metals, such as aluminum, and in the purification of copper and other metals. It is also used in various industrial and laboratory applications, including electroplating, electrorefining, and the production of hydrogen and oxygen gas.
Learn more about electrolysis at: https://brainly.com/question/12994141
#SPJ1
Related Questions
The acid-dissociation constant for benzoic acid (C6H5COOH) is 6.3×10−5.
Answers
Equilibrium concentration of C₆H₅COO⁻ in the solution is calculated as 2.008 × 10⁻⁴ M.
What is meant by acid-dissociation constant?Measure of the strength of acid in any solution is called acid-dissociation constant.
The dissociation reaction of benzoic acid (C₆H₅COOH) in water can be represented as follows: C₆H₅COOH + H₂O ⇌ C₆H₅COO⁻ + H₃O⁺
Ka = [C₆H₅CO⁻][H₃O⁺] / [C₆H₅COOH]
Ka = [C₆H₅COO⁻][H₃O⁺] / [C₆H₅COOH]
6.3 × 10⁻⁵ = [C₆H₅COO⁻[H₃O⁺] / 0.0064
[C₆H₅COO-][H₃O⁺] = 6.3 × 10⁻⁵ × 0.0064
[C₆H₅COO⁻][H3O⁺] = 4.032 × 10⁻⁷
[C₆H₅COO⁻] = x
[H₃O⁺] = x
x² = 4.032 × 10⁻⁷
x = √(4.032 × 10⁻⁷)
x = 2.008 × 10⁻⁴
Therefore, the equilibrium concentration of C₆H₅COO⁻ in the solution is 2.008 × 10⁻⁴ M.
To know more about acid-dissociation constant, refer
https://brainly.com/question/22668939
#SPJ1
Phosphorus occurs naturally in the form of fluorapatite, CaF23Ca3(PO4)2, the dot indicating the part CaF2 to three parts Ca3(PO4)2. The mineral is reacted with an aqueous solution of sulfuric acid. The products are phosphoric acid, hydrogen fluoride, and gypsum, CaSO42H2O. Write and balance the chemical equation describing the process.
Answers
Answer:
The balanced chemical equation for the reaction is:
5CaF2 · 3Ca3(PO4)2 + 24H2SO4 → 20H3PO4 + 10HF + 15CaSO4 · 2H2O
This equation shows that when fluorapatite is reacted with sulfuric acid, it produces phosphoric acid, hydrogen fluoride, and gypsum. The balanced equation indicates that 5 moles of CaF2·3Ca3(PO4)2 react with 24 moles of H2SO4 to produce 20 moles of H3PO4, 10 moles of HF, and 15 moles of CaSO4·2H2O.
[ hii! your question is done <3 now; can you give me an rate of 5☆~ or just leave a thanks! for more! your welcome po~ ]
In the laboratory a "coffee cup" calorimeter , or constant pressure calorimeter, is frequently used to determine the specific heat of a solid, or to measure the energy of a solution phase reaction.
Since the cup itself can absorb energy, a separate experiment is needed to determine the heat capacity of the calorimeter. This is known as calibrating the calorimeter and the value determined is called the calorimeter constant.
One way to do this is to use a common metal of known heat capacity. In the laboratory a student heats 90.80 grams of nickel to 98.73 °C and then drops it into a cup containing 84.70 grams of water at 24.03 °C. She measures the final temperature to be 31.63 °C.
Using the accepted value for the specific heat of nickel (See the References tool), calculate the calorimeter constant.
Answers
The specific heat capacity of nickel is given as 0.444 J/g·°C and the calorimeter constant is calculated to be 14.86 J/°C.
To calculate the calorimeter constant, we need to use the heat gained by the water and the heat lost by the nickel. The heat gained by the water can be calculated using the equation:
q₁ = m₁ × C₁ × ΔT
where m₁ is the mass of water, C₁ is the specific heat capacity of water (4.184 J/g·°C), and ΔT is the change in temperature of the water (final temperature - initial temperature).
q₁ = 84.70 g × 4.184 J/g·°C × (31.63 °C - 24.03 °C)
q₁ = 2,550 J
The heat lost by the nickel can be calculated using the equation:
q₂ = m₂ × C₂ × ΔT
where m₂ is the mass of nickel (90.80 g), C₂ is the specific heat capacity of nickel (0.444 J/g·°C)
q₂ = 90.80 g × 0.444 J/g·°C × (98.73 °C - 31.63 °C)
q₂ = 2,654 J
Since the heat lost by the nickel is equal to the heat gained by the water, we can write:
q₂ = q₁ + q₃
where q₃ is the heat absorbed by the calorimeter. Solving for q₃, we get:
q₃ = q₂ - q₁
q₃ = 2,654 J - 2,550 J
q₃ = 104 J
The calorimeter constant can now be calculated using the equation:
C₃ = q₃ ÷ ΔT
C₃ = 104 J ÷ (31.63 °C - 24.03 °C)
C₃ = 14.86 J/°C
To learn more about calorimeter follow the link:
https://brainly.com/question/14857582
#SPJ1
AP Environmental Science
The graph shows the change in energy production sources over time.
What do these data say about the country’s use of nuclear energy?
- Natural gas use spiked in 2003 because most nuclear power plants were decommissioned.
- The amount of hydroelectric power has remained constant in spite of nuclear power being used today.
- Most of the nuclear power used in the United States comes from plants built before 1990.
- Nuclear power was the main source of electricity before the turn of the century.
Answers
The graph's data show that throughout time, nuclear energy has lost some of its significance as a source of energy production in the US.
Since the turn of the century, the amount of nuclear energy utilised has continuously fallen while the use of natural gas, coal, and hydroelectric power has increased.
This might indicate that the nation has been moving away from using nuclear energy as its main source of electricity. This information shows that the nation is switching from nuclear energy as its main source of electricity to other sources such as coal, natural gas, and hydroelectricity.
Learn more about electricity at:
https://brainly.com/question/31668005
#SPJ1
A valid Lewis structure of _____ cannot be drawn without violating the octet rule.
a)
NF3
b)
IF3
c)
PF3
d)
SbF3
Answers
A valid Lewis structure of IF[tex]_3[/tex] cannot be drawn without violating the octet rule. Therefore, the correct option is option B.
Lewis structures, often referred to as Lewis dot calculations, Lewis dot constructions, electron dot frameworks, especially Lewis electron dot configurations (LEDS), represent diagrams that depict the interactions of atoms inside molecules as well as any single pairs of electrons which may be present. A valid Lewis structure of IF[tex]_3[/tex] cannot be drawn without violating the octet rule.
Therefore, the correct option is option B.
To know more about Lewis structure, here:
https://brainly.com/question/20300458
#SPJ1
Which of the following has the bonds correctly arranged in order of increasing polarity?
Question 15 options:
a)
Be-F, Mg-F, N-F, O-F
b)
O-F, N-F, Be-F, Mg-F
c)
O-F, Be-F, Mg-F, N-F
d)
N-F, Be-F, Mg-F, O-F
e)
Mg-F, Be-F, N-F, O-F
Answers
O-F, N-F, Be-F, Mg-F has the bonds correctly arranged in order of increasing polarity. Therefore, the correct option is option B.
Polarity is the transportation of electrical charge among the atoms connected by a chemical bond. Because both hydrogen atoms in H2 are neutral in their electrical properties, bonds among atoms of various substances are electrically inequivalent, as opposed to bonds among identical atoms, which are electrically uniform.
For instance, the chlorine atom has a slightly negative charge while the hydrogen atom becomes slightly positively charged in hydrogen chloride. Partial charges are the tiny electrical charges that exist on different atoms, and their existence indicates the presence of a polar connection. O-F, N-F, Be-F, Mg-F has the bonds correctly arranged in order of increasing polarity.
Therefore, the correct option is option B.
To know more about Polarity, here:
https://brainly.com/question/30002497
#SPJ1
a sample of oxygen gas occupies a volume of 400 ml at 50 degrees Celsius and 250mmhg
What will its volume be at STP ?
Answers
At STP, the temperature is 0 degrees Celsius and the pressure is 1 atm (101.325 kPa).
What is temperature?Temperature is a measure of the hotness or coldness of an object or environment. It is measured by thermometers using a numerical scale. Temperature is a physical property of matter that is described as the intensity of heat. Temperature is measured in units such as Celsius, Fahrenheit, and Kelvin. The temperature of an object or environment is determined by the average kinetic energy of the particles that make up the object or environment. Temperature affects many aspects of life, from human comfort to the ability of certain species of animals to survive in a given environment. Temperature can also affect the rate of chemical reactions, the strength of certain materials, and the behavior of sound waves.
According to the ideal gas law, the volume of a gas is inversely proportional to the pressure, and directly proportional to the temperature. Therefore, the volume of the oxygen gas at STP will be:
V2 = V1 * (T2/T1) * (P1/P2)
V2 = 400 ml * (273K / 323K) * (101.325 kPa / 250 mmHg)
V2 = 284.7 ml
To learn more about temperature
https://brainly.com/question/4735135
#SPJ1
Summarize the evidence indicating that over several hundreds of years or more there have been variations in the level of the solar activity.
A. The use of ice cores have helped track the activity of the Sun containing information over the centuries
B. Small features on the surface of the Sun provide evidence of past activity similar to craters on Earth
C. Counts of sunspots infer the overall magnetic field changes, which correlate with the level of the magnitude of the solar dynamo and hence solar activity. Astronomers have reliable data going back to 1750.
D. Scientists have reliable data on Earth’s temperature fluctuations beginning from 1880, which can be used to demonstrate solar activity.
Answers
The evidence indicating that over several hundreds of years or more there have been variations in the level of the solar activity is The use of ice cores have helped track the activity of the Sun containing information over the centuries. The correct option to this question is A.
What proof do we have of long-term changes in the climate around the world?The Earth's temperature responds to variations in greenhouse gas concentrations, as evidenced by ice cores taken from tropical mountain glaciers, Antarctica, and Greenland. Tree rings, ocean sediments, coral reefs, and sedimentary rock strata are further sources of ancient information. Global sea levels are rising as more glaciers melt and enter the ocean. Another indicator that Earth's climate is warming is the rise in sea level.Ice cores have given researchers information on climate and ice dynamics spanning many thousands of years with extremely high, and occasionally seasonal, resolution. Scientists can use this knowledge to understand how and why the climate has changed in the past.For more information on climate change kindly visit to
https://brainly.com/question/28779953
#SPJ1
The evidence indicating that over several hundreds of years or more there have been variations in the level of the solar activity is The use of ice cores have helped track the activity of the Sun containing information over the centuries. The correct option to this question is A.
What proof do we have of long-term changes in the climate around the world?The Earth's temperature responds to variations in greenhouse gas concentrations, as evidenced by ice cores taken from tropical mountain glaciers, Antarctica, and Greenland. Tree rings, ocean sediments, coral reefs, and sedimentary rock strata are further sources of ancient information. Global sea levels are rising as more glaciers melt and enter the ocean. Another indicator that Earth's climate is warming is the rise in sea level.Ice cores have given researchers information on climate and ice dynamics spanning many thousands of years with extremely high, and occasionally seasonal, resolution. Scientists can use this knowledge to understand how and why the climate has changed in the past.For more information on climate change kindly visit to
https://brainly.com/question/28779953
#SPJ1
Why would a flare be observed in visible light, when they are so much brighter in x-ray and ultraviolet light?
A. Flares can damage x-ray and ultraviolet detectors and these therefore must be turned off during these events, leaving only visible observatories that can be used.
B. The proximity of the sun allows us to be able to view solar flares in visible light because at this distance, they are still very bright.
C. The distance to the Sun is so vast that the x-ray and ultraviolet light from the flares dim before they can reach Earth leaving only the visible light.
D. In order to observe x-ray and ultraviolet light, the telescopes have to be in space.
Answers
A flare would be seen in visible light even though they are much brighter in x-ray and ultraviolet light because (D) The telescopes need to be in space in order to observe x-ray and ultraviolet light.
The reason solar flares are so brilliant?When the Sun's powerful magnetic fields get too twisted, flares happen. The tangled magnetic fields snap when they are overtwisted, much like a rubber band that snaps when overtwisted.
What triggers the flares and explosions that we observe on the sun's surface?A quick explosion of energy known as a solar flare is brought on by the tangling, crossing, or reorganisation of magnetic field lines close to sunspots. It contains electrically charged gases that produce strong magnetic fields in some regions.
To learn more about solar flares visit:
brainly.com/question/22331462
#SPJ1
Si se coloca un termómetro
al sol mide la
del aire, del sol u
directamente
temperatura
otra cosa
Answers
Answer:
El termómetro expuesto directamente al sol medirá la temperatura del aire circundante y la radiación solar, pero no la temperatura del sol en sí.
A 11.27-g block of solid gold at 68.23 °C is immersed in a 23.16-g pool of liquid ethanol with a temperature of 10.76 °C. When thermal equilibrium is reached, what is the temperature of the gold and ethanol?
Specific heat capacities: gold = 0.129 J/g °C; ethanol = 2.44 J/g °C
Answers
Answer:
Final Temperature = 12.20 Celsius
Explanation:
Use the equation:
ΔC*q*m = -ΔC*q*m
[tex]11.27*0.129*(T_{f}-68.23) = -23.16*2.44*(T_{f}-10.76)\\1.45T_{f} -99.19 = -56.51T_{f} +608.15\\T_{f} = 12.20 C[/tex]
What is the concentration of a 25 mL oxalic acid solution that requires 23.7 mL of a 0.0175 M KMnO4 solution to reach the endpoint of the titration?
2 KMnO4 + 5 H2C2O4 + 3 H2SO4 → 2 MnOS4 + 10 CO2 + K2SO4 + 8 H2O
Answers
The concentration of the 25 mL oxalic acid solution is 0.604 M.
Using the balanced chemical equation provided, we can see that the stoichiometric ratio of KMnO₄ to oxalic acid (H₂C₂O₄) is 2:5. Therefore, the number of moles of oxalic acid in the 23.7 mL of 0.0175 M KMnO₄ solution used in the titration can be calculated as follows:
0.0175 M KMnO₄ x 23.7 mL x 2/5 = 0.0151 moles H₂C₂O₄
Since the volume of the oxalic acid solution used in the titration is 25 mL, the concentration of the oxalic acid solution can be calculated as follows:
Concentration = Number of moles ÷ Volume
Concentration = 0.0151 moles ÷ 0.025 L
Concentration = 0.604 M
To learn more about oxalic follow the link:
https://brainly.com/question/13663729
#SPJ1
In the laboratory a "coffee cup" calorimeter, or constant pressure calorimeter, is frequently used to determine the specific heat of a solid, or to measure the energy of a solution phase reaction.
A student heats 67.38 grams of chromium to 97.97 °C and then drops it into a cup containing 85.09 grams of water at 21.20 °C. She measures the final temperature to be 27.35 °C.
The heat capacity of the calorimeter (sometimes referred to as the calorimeter constant) was determined in a separate experiment to be 1.74 J/°C.
Assuming that no heat is lost to the surroundings calculate the specific heat of chromium.
Answers
The specific heat of chromium is 0.436 J/g·°C, assuming no heat is lost to the surroundings.
Using the principle of conservation of energy, we can determine the heat gained by the water, which is equal to the heat lost by the chromium.
The heat gained by the water can be calculated using the formula:
q₁ = m₁ × C₁ × ΔT
where q₁ is the heat gained by the water, m₁ is the mass of water, C₁ is the specific heat of water, and ΔT is the change in temperature of the water.
Substituting the given values, we get:
q₁ = (85.09 g) × (4.184 J/g·°C) × (27.35 °C - 21.20 °C)
q₁ = 1,454.67 J
The heat lost by the chromium can be written as:
q₂ = -q₁ = -1,454.67 J
The heat lost by the chromium can also be expressed as:
q₂ = m₂ × C₂ × ΔT
where m₂ is the mass of chromium, C₂ is the specific heat of chromium, and ΔT is the change in temperature of the chromium.
Substituting the given values and solving for C₂, we get:
C₂ = -q₂ ÷ (m₂ × ΔT)
C₂ = -1,454.67 J ÷ (67.38 g × (97.97 °C - 27.35 °C))
C₂ = 0.436 J/g·°C
To learn more about heat follow the link:
https://brainly.com/question/11297584
#SPJ1
A student places a 12-gram cube of ice inside a container. After six hours, the student returns to observe the contents of the container. Which sentence suggests that the container is an open system?
A.
The container contains 12 grams of liquid water and no ice.
B.
The container contains 12 grams of ice and no liquid water.
C.
The container contains 8 grams of liquid water and no ice.
D.
The container contains 8 grams of ice and 4 grams of liquid water.
E.
The container contains 8 grams of liquid water and 4 grams of water vapor.
Answers
A system that can share both matter and energy with its surroundings is called "open." The given sentence, "The container contains 8 grams of liquid water and 4 grams of water vapor," says that water molecules have left the container in the form of water vapor. This means that both matter (water vapor) and energy (in the form of heat to turn liquid water into water vapor) have been shared between the container and its surroundings. So, it's likely that the container is an open system.
A closed system, on the other hand, lets energy (in the form of heat or work) but not matter flow between itself and its surroundings. On the other hand, a separated system can't share either matter or energy with its surroundings.
The other choices in the question don't say anything about the presence of water vapor. Instead, they only talk about the presence of water in different forms (like liquid water or ice) or the amount of water (in grams). Without water vapor, there would be no reason to think that the system is open because there would be no sign that matter (water vapor) is being traded with the outside world. Since both liquid water and water mist are mentioned in answer choice E, this suggests that the container is an open system.
To know more about Thermodynamic Systems:
https://brainly.com/question/2846657
Answer:
C. The container contains 8 grams of liquid water and no ice.
Explanation:
Open system allows the ice to melt and some to evaporate out of the cup.
CAN SOMEONE HELP WITH THIS QUESTION?
Answers
The enthalpy change for the given reaction is -7332 kJ, after using the Hess's law.
What is enthalpy change?Enthalpy change, represented by ΔH, is the amount of heat absorbed or released by a system at constant pressure during a chemical reaction or physical process. It is a thermodynamic property that describes the difference in energy between the reactants and the products of a reaction.
First, we need to manipulate the given equations to obtain the target equation:
C₂H₆(g) → C₂H₂(g) + 2H₂(g)
2C₂H₂(g) +5O₂(g) → 4CO₂(g) + 2H₂O (1)
2H₂(g) + O₂(g) → 2H₂O (1)
Now we can use Hess's Law, which states that if a reaction can take place by two or more different routes, the total enthalpy change is the same for each route.
We can obtain the target equation by combining the given equations in the following way:
C₂H₆(g) + 7/2O₂(g) → 2CO₂(g) + 3H₂O (1) (multiply the 3rd equation by 3/2)
ΔH1 = -1560 kJ
2C₂H₂(g) +5O₂(g) → 4CO₂(g) + 2H₂O(1)
ΔH₂ = -572 kJ (reverse the 2nd equation and change the sign)
Adding the above two equations we get,
C₂H₆(g) + 7/2O₂(g) → 2CO₂(g) + 3H₂O (1)
ΔH₁ + ΔH₂ = -2132 kJ
Now we need to multiply the first equation by 2 to obtain the target equation:
2C₂H₆(g) + 7O₂(g) → 4CO₂(g) + 6H₂O(1)
ΔH₃ = 2*(-2600 kJ) = -5200 kJ
Adding ΔH₁+ΔH₂ to ΔH₃, we get:
C₂H₆(g) → C₂H₂(g) + 2H₂(g)
ΔH = ΔH₁ + ΔH₂ + ΔH₃ = -7332 kJ
To know more about Hess's Law, visit:
https://brainly.com/question/14561923
#SPJ1
independent variable in the reaction of stoichiometry and percentage yield
Answers
In a chemical reaction, the stoichiometry refers to the quantitative relationship between the reactants and products, as expressed in a balanced chemical equation.
The stoichiometry of a reaction determines the theoretical yield, which is the maximum amount of product that can be obtained from a given amount of reactants.
The percentage yield, on the other hand, is a measure of the actual yield of a reaction compared to the theoretical yield. It is calculated by dividing the actual yield by the theoretical yield and multiplying by 100%.
In this context, the independent variable would be the amount of reactants used in the reaction, since this is what is being varied or controlled in the experiment.
The stoichiometry and percentage yield would be dependent variables, as they depend on the amount of reactants used and the efficiency of the reaction.
To know more about stoichiometry, visit: brainly.com/question/30215297
Would you describe the overall process of forming memory as "universal" across cultures?
Answers
Answer:
Memory formation involves similar cognitive processes, such as encoding, storage, and retrieval of information, that are common to all humans regardless of their cultural background. Also, memory formation is a fundamental cognitive function that allows individuals to acquire, retain, and recall information from past experiences or learning, and it is necessary for various cognitive tasks such as learning, problem-solving, and decision-making.
While there could be cultural influences on memory, such as language, social norms, education, and cultural practices, the basic cognitive processes of memory formation are considered to be universal. The encoding process, where information is acquired and processed into a memory representation, is similar across cultures in terms of how sensory information is transformed into neural codes. The storage process, where information is retained over time, and the retrieval process, where information is recalled and brought back into consciousness, are also considered to be universal cognitive functions.
It is important to emphasize that cultural factors can influence how memory is experienced, expressed, and used in different cultures, but the underlying cognitive processes of memory formation are believed to be similar across cultures. Research on memory has been conducted across various cultures and populations, and while there may be cultural variations in memory processes, the basic cognitive mechanisms of memory formation are considered to be universal. It is important to consider cultural context when studying or interpreting memory processes, but the fundamental cognitive processes of memory formation are generally believed to be universal across cultures.
How does the chemical structure of a substance affect its interaction with other substances?
Answers
This is due to the fact that a substance's chemical qualities, such as its molecular form, polarity, and functional groups, govern how it behaves and interacts with other substances.
How does their chemical makeup impact their chemical characteristics?By illustrating the spatial arrangement of atoms and chemical bonds within the molecule, chemical structure establishes the molecular geometry of a compound. In doing so, chemists are given a crucial visual depiction of a chemical formula.
In what ways do drugs interact with one another?In a chemical reaction, reactants come into contact with one another, atoms in the reactants break their connections with one another, and then the atoms reorganise and form new bonds to create the products.
To know more about molecule visit:-
https://brainly.com/question/19556990
#SPJ1
How would the wetability of silica behave on changing silanol surface anchoring groups from-O3SiCH3to-O3Si(CH2)8CH3to-O3Si(CF2)8CF3?
Answers
The wettability of silica particles can be gradually reduced and made more hydrophobic by altering the silanol surface anchoring groups.
What do silica gel's surface silanol groups do?Surface silanol groups are created during the condensation polymerization of silicic acid, which results in the substance known as silica gel. The majority of the silanol groups on the surface are free silanol groups. There are numerous ways to modify these silanol groups.
What makes silanol and siloxane different from one another?Siloxane is a functional group and silane is an inorganic molecule with the chemical formula. The main distinction between silane and siloxane is that the former is a chemical compound, whilst the latter is an organosilicon functional group.
To know more about hydrophobic visit:-
https://brainly.com/question/14930730
#SPJ1
72g of water is broken down by electricity to form hydrogen and oxygen.
a. Write the chemical equation.
b. Find the mass of the obtained hydrogen.
c. Find the volume of the obtained hydrogen and oxygen at STP.
(H = 1, 0=16, At STP: 2g of H2 and32g of O₂2 has 22.4L)
Answers
A. The balanced equation is: 2H₂O -> 2H₂ + O₂
B. The mass of hydrogen obtained is 8 g
Ci. The volume of hydrogen produced is 89.6 L
Cii. The volume of oxygen produced is 44.8 L
A. How do i write the balanced equation?The balanced equation for the reaction is written as follow:
Water -> Hydrogen + oxygen
2H₂O -> 2H₂ + O₂
B. How do i determine the mass hydrogen obtained?first, we shall write the balanced equation for the reaction. This is given below:
2H₂O -> 2H₂ + O₂
Molar mass of H₂O = 18 g/molMass of H₂O from the balanced equation = 2 × 18 = 36 g Molar mass of H₂ = 2 g/molMass of H₂ from the balanced equation = 2 × 2 = 4 gFrom the balanced equation above,
36 g of H₂O reacted to produce 4 g of H₂
Therefore,
72 g of H₂O will react to produce = (72 × 4) / 36 = 8 g of H₂
Thus, the mass of hydrogen obtained is 8 g
Ci. How do i determine the volume of hydrogen produced?The volume of hydrogen produced can be obtained as follow:
2 g of H₂ = 22.4 L
Therefore
8 g of H₂ = (8 g × 22.4 L) / 2 g
8 g of H₂ = 89.6 L
Thus, the volume of hydrogen produced is 89.6 L
Cii. How do i determine the volume of oxygen produced?First, we shall obtain the mass of oxygen gas produced. Details below:
2H₂O -> 2H₂ + O₂
Molar mass of H₂O = 18 g/molMass of H₂O from the balanced equation = 2 × 18 = 36 g Molar mass of O₂ = 32 g/molMass of O₂ from the balanced equation = 1 × 32 = 32 gFrom the balanced equation above,
36 g of H₂O reacted to produce 32 g of O₂
Therefore,
72 g of H₂O will react to produce = (72 × 32) / 36 = 64 g of O₂
Finally, we shall determine the volume of oxygen produced. Details below:
32 g of O₂ = 22.4 L
Therefore
64 g of O₂ = (64 × 22.4) / 32 g
64 g of O₂ = 44.8 L
Thus, the volume of oxygen produced is 44.8 L
Learn more about mass produced:
https://brainly.com/question/9526265
#SPJ1
Cl 2 and N 2 react according to the following equation
3Cl 2(g) + N 2(g) → 2NCl 3(g)
If 4 L of a stoichiometric mixture of chlorine and nitrogen are converted to nitrogen
trichloride under conditions of constant temperature and pressure what is the
volume of NCl 3(g) produced?
Answers
Since the mixture is stoichiometric, the number of moles of Cl2 is equal to the number of moles of N2. Thus, the total number of moles of gas in the mixture is 2n.
Using the ideal gas law, we can relate the number of moles of gas to the volume of gas at constant temperature and pressure:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.
Since the temperature and pressure are constant, we can write:
V = (n/RT) x P
Substituting the expression for n above, we get:
V = [(2/3) x n / RT] x P
Therefore, the volume of NCl3 produced is [(2/3) x n / RT] x P.
You have been provided with three test tubes. One of them contains distilled water and the other two contain an acidic solution and a basic solution, respectively. If you are giver only red litmus paper, how will you identify the contents of each test tube?
Answers
Answer:
When exposed to a base, red litmus paper becomes blue; yet, when exposed to an acid or neutral solution, it remains red. As a result, you may use red litmus paper to differentiate the basic solution from the other two solutions:
Dip the red litmus paper into the first distilled water test container. The water is neutral if the paper remains red.
In the second test tube, place the red litmus paper. If the paper becomes blue, the solution is straightforward. If the solution remains red, it is either neutral or acidic.
In the third test tube, place the red litmus paper. The solution is neutral if the paper remains red. If the paper becomes blue, the solution is straightforward.
For the following combustion reaction
CH₃CH₂OCH₂CH₃(l) + 6O₂(g) → 4CO₂(g) + 5H₂(g) ∆H = -2.72 × 10³kJ
When a 12.8-g sample of diethyl ether (molar mass = 74.12 g/mol) is burned, how much energy (in kJ) is released as heat?
Answers
The amount of energy released as heat when a 12.8 g sample of diethyl ether is burned is 469.23 kJ.
The given combustion reaction is:
CH₃CH₂OCH₂CH₃(l) + 6O₂(g) → 4CO₂(g) + 5H₂(g) ∆H = -2.72 × 10³ kJ
We are given a 12.8 g sample of diethyl ether (C₄H₁₀O), which has a molar mass of 74.12 g/mol. To find the amount of moles of diethyl ether, we can use the formula:
moles = mass/molar mass
moles of diethyl ether = 12.8 g / 74.12 g/mol = 0.1727 mol
According to the balanced chemical equation, one mole of diethyl ether produces -2.72 × 10³ kJ of heat. Therefore, we can find the amount of heat produced for 0.1727 moles of diethyl ether by using the following formula:
Heat produced = moles of diethyl ether × ∆H
Heat produced = 0.1727 mol × (-2.72 × 10³ kJ/mol) = -469.23 kJ
Learn more about combustion reaction, here:
https://brainly.com/question/30566775
#SPJ1
Complete the balanced molecular chemical equation for the reaction below. If no reaction occurs, write NR after the reaction arrow. Be sure to include the proper phases for all species within the reaction.
ZnC|2(aq) + Hgz(NOs)2(aq)—>
Answers
Zinc carbonate reacts with hydrogen nitrate in the following balanced chemical equation: 2ZnCO3(aq) + HNO3(aq) 2Zn(NO3)2(aq) + CO2(g) + H2O(l). The reactant on the left side of the equation is the solid zinc carbonate (ZnCO3).
The reactant on the right side of the equation is an aqueous solution of hydrogen nitrate (HNO3). The end results are water (H2O), carbon dioxide (CO2) as a gas, and zinc nitrate (Zn(NO3)2) also in an aqueous solution. For a reaction to take place, each of the reactants and products must be in the appropriate phase.
The mole ratio of the reactants is 1:1, hence each species' coefficient in the balanced equation must be equal. The coefficient in the balanced equation is two.
Learn more about reactants at:
https://brainly.com/question/17096236
#SPJ1
Explain Explain why hard water flowing in tead Safer for drinking than soft water pipe. pipes may be flowing in the same
Answers
Hard water contains higher levels of minerals such as calcium and magnesium, while soft water has low levels of these minerals. While both hard and soft water can be safe for drinking, hard water is generally considered safer due to the minerals it contains.
Why is hard water considered safer to soft water?The minerals in hard water can actually be beneficial to human health, as they are important for strong bones and teeth. In addition, the minerals in hard water can help to balance the body's electrolytes and may have other health benefits.
Soft water, on the other hand, may contain higher levels of sodium or other chemicals used in the softening process. While these levels are generally considered safe, some people with certain health conditions may need to avoid drinking water with higher sodium levels.
Learn about Hard water here https://brainly.com/question/28178305
#SPJ1
How many grams of iron are produced when 450 grams of iron (lll) oxide are reacted
Answers
To answer this question, we need to know the balanced chemical equation for the reaction between iron (III) oxide and another substance that would produce iron.
How many grams of iron will be produced when 450 grams of iron (lll) oxide are reacted?Assuming the reaction is:
Fe₂O₃ + 3CO → 2Fe + 3CO₂
This equation tells us that one mole of Fe₂O₃ reacts with three moles of CO to produce two moles of Fe. We can use this information to calculate the number of moles of Fe that can be produced from 450 grams of Fe₂O₃.
Convert the mass of Fe₂O₃ to moles in the first step:
Molar mass of Fe₂O₃ = 2 x atomic mass of Fe + 3 x atomic mass of O = 2 x 55.85 + 3 x 16.00 = 159.69 g/mol
Number of moles of Fe₂O₃ = 450 g / 159.69 g/mol = 2.82 mol
According to the balanced chemical equation, 1 mole of Fe₂O₃ produces 2 moles of Fe. Therefore, the number of moles of Fe that can be produced from 2.82 mol of Fe₂O₃ is:
Number of moles of Fe = 2.82 mol x (2 mol Fe / 1 mol Fe₂O₃) = 5.64 mol
Convert the number of moles of Fe to grams in the final step:
Molar mass of Fe = 55.85 g/mol
Mass of Fe produced = 5.64 mol x 55.85 g/mol = 315.89 g
Therefore, if 450 grams of iron (lll) oxide are reacted with carbon monoxide to produce iron, the amount of iron produced would be 315.89 grams.
Learn more about iron (lll) oxide here:
https://brainly.com/question/14401892
#SPJ1
What are the bond angles?
Answers
Answer:
109.5º
Explanation:
The leftmost carbon has four bonds and no lone pairs attached to it. According to the VSEPR model, this carbon has a tetrahedral geometry. Thus, each bond angle is 109.5º
If 2.7 × 10−10% of the atoms of a radioactive isotope disintegrate in 1.0 yr, what is the decay constant of the process? Enter your answer in scientific notation.
Answers
The decay constant of the process is approximately 2.7 × 10⁻¹² per year.
The decay constant (λ) represents the probability of decay per unit of time. It is related to the half-life (t [tex]\frac{1}{2}[/tex]) of a radioactive isotope by the equation
λ = ln(2) ÷ t [tex]\frac{1}{2}[/tex].
To determine the decay constant, we need to first convert the percentage given to a decimal, which is 2.7 × 10⁻¹². We can then use the equation N = N0e^(-λt), where N0 is the initial number of atoms, N is the final number of atoms after time t, and e is the mathematical constant e ≈ 2.71828.
Assuming that N ≈ N0 and solving for λ, we get:
λ = -ln(1 - 2.7 × 10⁻¹²) ÷ t
Substituting t = 1.0 year, we get:
λ = -ln(1 - 2.7 × 10⁻¹²) ÷ 1.0 year
λ ≈ 2.7 × 10⁻¹² per year
To learn more about decay follow the link:
https://brainly.com/question/16623902
#SPJ1
You have three sodium carbonate solutions on a lab table in front of you. All of the solutions came from a 500.0-mI. volumetric flask containing 3.00 M sodium carbonate
Solution 1 contains 100.0 mL of the 3.00 M solution.
Solution 2 contains 50.0 mL of the 3.00 M solution.
Solution 3 contains 10.0 mL of the 3.00 M solution.
What is the new concentration of Solution 2 if 15.8 g of solid sodium carbonate is added and dissolved? (Assume no volume change.)
Answers
The new concentration of solution 2 would be 3.00 M after the addition of the solid sodium carbonate.
Dilution equation problemUsing the dilution equation:
C1V1 = C2V2
For Solution 2:
C1 = 3.00 MV1 = 50.0 mL = 0.0500 LV2 = V1 = 0.0500 LWe can find the amount of sodium carbonate added by converting the given mass to moles:
m = 15.8 gMolar mass of Na2CO3 = 2(22.99 g/mol) + 1(12.01 g/mol) + 3(16.00 g/mol) = 105.99 g/moln = m/M = 15.8 g / 105.99 g/mol = 0.149 molSince each mole of solid sodium carbonate dissociates to give two moles of sodium ions and one mole of carbonate ions, we can calculate the increase in the number of moles of sodium ions:
Δn(Na+) = 2n(Na2CO3) = 2(0.149 mol) = 0.298 mol
The new total number of moles of sodium ions in the solution will be:
n(Na+) = n(Na+)initial + Δn(Na+)n(Na+) = (3.00 M)(0.0500 L) + 0.298 mol = 0.448 molFinally, new concentration:
C2 = C1V1/V2C2 = (3.00 M)(0.0500 L) / 0.0500 LC2 = 3.00 MTherefore, the new concentration of Solution 2 is still 3.00 M after the addition of solid sodium carbonate.
More on dilution problems can be found here: https://brainly.com/question/29093084
#SPJ1
The umbrella of ozone in the upper atmosphere is
formed from the photolysis of O₂ molecules by solar
radiation according to the following reaction:
O2+ hv0+ 0
Calculate the cutoff wavelength above which this
reaction cannot occur (in nm).
On your own, look up a plot of the solar spectrum in
the upper atmosphere and identity which portion of
the spectrum will cause the O₂ to dissociate.
Answers
A plot of the solar spectrum in the upper atmosphere shows that the majority of the solar radiation in this region is absorbed by the ozone layer.
What is the ozone layer?The energy required for the photolysis of O₂ to form the ozone layer is approximately 498 kJ/mol. Using the above equations, we can calculate the threshold frequency and cutoff wavelength:
f = (498 kJ/mol) / (6.626 x 10^-34 J s) = 7.51 x 10^15 Hz
λ = (3.00 x 10^8 m/s) / (7.51 x 10^15 Hz) = 40.0 nm
Therefore, any solar radiation with a wavelength shorter than 40.0 nm can cause the photolysis of O₂ to form the ozone layer. This portion of the spectrum is called the vacuum ultraviolet region.
Learn more about ozone layer:https://brainly.com/question/14330630
#SPJ1