Answer:
H3PO4 + 3KOH ----> K3PO4 + 3H2O
Explanation:
The valency of K element is + 1 while that of PO4 compound is -3
Hence, at least 3 K atoms are needed to combine with PO4 to form K3PO4 compound.
Hence, the revised equation will be
H3PO4 + 3KOH ----> K3PO4 + 3H2O
Now, the number of atoms and charges of each element is a given equation are equal on both the left and right hand side.
Convert 213.62 grams of xenon gas at STP to L.
1. What is the coefficient of the scientific notation answer ?
2. What is the exponent of the scientific notation answer?
3. How many significant figures are there in the answer?
4.What is the right most significant figure in the answer ?
Answer: The coefficient is 3.645
The exponent is 1
There are 4 significant digits
The rightmost significant figure is 5
Explanation:
Scientific notation is defined as the representation of expressing the numbers that are too big or too small and are represented in the decimal form with one digit before the decimal point times 10 raise to the power.
For example : 5000 is written as [tex]5.0\times 10^3[/tex]
According to avogadro's law, 1 mole of every gas contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles, occupy 22.4 L at STP and weighs equal to its molecular mass.
131.29 g of Xe occupy = 22.4 L at STP.
Thus 213.62 g of [tex]Xe[/tex] occupy = [tex]\frac{22.4}{131.29}\times 213.62=36.45L[/tex] at STP.
Scientific notation = [tex]3.645\times 10^1L[/tex]
The coefficient is 3.645
The exponent is 1
There are 4 significant digits
The rightmost significant figure is 5
when is pressure evident in daily lives?
Explanation:
When air is sucked out of a drinking straw, the air pressure inside if decreases and the atmospheric pressure outside
Answer:
The pressure of the liquid (blood) forces the liquid to move into the syringe when its plunger is withdrawn. When air is sucked out of a drinking straw, the air pressure inside if decreases and the atmospheric pressure outside forces the liquid to go inside the straw.
please help me with this question
Answer:
Magnesium Hydroxide or Milk of Magnesia
Explanation:
The chemical sign for Magnesium is Mg, and OH automatically means Hydroxide.
What molecular shape is this lewis structure?
A. Trigonal pyramidal
B. Trigonal planar
C. Bent
D. Tetrahedral
E. Linear
Answer:C
Explanation: I learnet it too but more time ago hope its good
A pot of water at 25°C is placed over a flame until it has boiled away. Which way is energy being transferred between the system and the surroundings? *
Answer:
See explanation
Explanation:
According to the law of conservation of energy; energy is neither created nor destroyed but is converted from one form to another.
This means that energy can not be lost, we can trace the transfer of energy between a system and its surroundings.
When a pot of water at 25°C is placed over a flame until it has boiled away, energy is transferred from the pot (the system) to the surroundings hence the temperature of the surroundings rises accordingly.
PLEASE HELP
How does increasing the amount of greenhouse gases affect the earth?
It causes more hurricanes and tornadoes.
It lowers the earth's global temperature.
It causes fewer thunderstorms.
It raises the earth's global temperature.
Mark other guy brainliest
I needed the answer for the test and he is correct
A majority of the world's electricity comes from water power.
True
False
Answer:
True.
Explanation:
Which question is a scientist who studies the genetic engineering of crops most likely attempting to answer?
A. How can a more stable supply of crops be created?
В. How can natural selection create better crops?
С. How can crops be grown without a need for light?
D. How can the genetic variation of crops be increased?
Answer:
i think that it is A
Explanation:
the other ones did not make as much sense
A scientist who studies the genetic engineering of crops most likely attempting how more stable supply of crops be created. so, option A is correct.
What is genetic engineering ?Genetic engineering, often known as genetic alteration, is a technique that modifies an organism's DNA using technology developed in labs. This could entail altering a single base pair (A-T or C-G), erasing a section of DNA, or incorporating a new DNA sequence.
In order to fix genetic flaws and hence prevent or treat hereditary illnesses, gene therapy aims to change specific genes.
The goal of genetic engineering is to alter the genes to increase the organism's capabilities beyond what is typical.
The term "genetic engineering" originally applied to a number of methods for modifying or altering living things through their heredity and reproductive processes.
Thus, option A is correct.
To learn more about genetic engineering follow the link below;
https://brainly.com/question/13491558
#SPJ2
In Belize City, on a cloudy day the temperature is 24 degrees Celsius. This is equal to how much in Fahrenheit. *
MULTIPLE CHOICE QUESTION
The difference between the smooth and rough ER is
that are attached to the outside of
ER.
the
the
ribosomes, smooth
DNA, rough
DNA, smooth
Answer:
???????
Explanation:
Un elemento hipotético posee un número másico igual 45 y en estado neutro (sin carga), tiene 22 electrones. Indicar el número de neutrones que posee dicho elemento hipotético:
Answer:
23 neutrones.
Explanation:
Bajo el modelo atómico actual, los átomos están hechos de neutrones (Particulas sin carga y número másico de 1), electrones (Partículas con carga de -1 y número másico de 0) y protones (Partículas con carga de +1 y número másico de 1).
El elemento contiene 22 electrones y carga neutra. Esto significa que contiene igual número de protones:
22 protones.
Como el número másico es de 45 y los protones aportarán solo 22 de número másico, el elemento debería tener:
23 neutrones para completar así, el número másico.
Which statement explains why many scientists believe that carbon dioxide has likely contributed more to global warming than other greenhouse gases?
Answer:
C. Carbon dioxide has increased as a result of increased human activities.
Explanation:
THESE ARE THE OPTIONS FOR THE QUESTION BELOW
A. Carbon dioxide is emitted from fertilizers used in farming.
B. Other greenhouse gases trap more heat than carbon dioxide.
C. Carbon dioxide has increased as a result of increased human activities.
D. Carbon dioxide is emitted from commercial refrigeration.
Global warming can be regarded as
long-term heating of climate system of the Earth, this has been a point if observation even as far as pre-industrial period arround 1850. This global warming can be attributed to activities such as human activities as well as primarily fossil fuel burning, and as a result of this there is rise in heat-trapping, increase in greenhouse gas levels arround the atmosphere of the Earth. Human activities that brings about increase of Carbon dioxide concentration in the atmosphere are ;
✓ burning of oil as well as coal and gas,
✓deforestation
Hence, many scientists believe that carbon dioxide has likely contributed more to global warming than other greenhouse gases as a result of increase in Carbon dioxide which is as a result of increased human activities.
Greenhouse gas, any gas that has the property of absorbing infrared radiation (net heat energy) emitted from Earth's surface and reradiating it back to Earth's surface, thus contributing to the greenhouse effect. Carbon dioxide, methane, and water vapour are the most important greenhouse gases.
Answer:
C
Explanation:
Just took quiz on edg. 2021
Mention any four names of conservation area?
Answer:
pi r squared
Explanation:
Which object is smaller than a cell?
Molecule
Organ
Organism
Tissue
Answer:
Molecule
Explanation:
Levels of organization (atom-molecule-cell-tissue-organ-organ-system-organism)
What happens to sediments that get deposited in basins?
Sedimentary basins are regions of the Earth where long-term subsidence creates accommodation space for accumulation of sediments. As the sediments are buried, they are subject to increasing pressure and begin the processes of compaction and lithification that transform them into sedimentary rock.
Answer: Sedimentary basins are regions of the Earth where long-term subsidence creates accommodation space for accumulation of sediments. As the sediments are buried,
Explanation:Hopeits right i fount it on a site
Can someone help? Please show work for each one!
Answer:
2)====We assume you are converting between moles CaCl2 and gram. You can view more details on each measurement unit: molecular weight of CaCl2 or grams This compound is also known as Calcium Chloride. The SI base unit for amount of substance is the mole. 1 mole is equal to 1 moles CaCl2, or 110.984 grams
110.98 g/mol
The molar mass of CaCl2 is 110.98 g/mol.
3)The molar mass of Na3 PO4 is 163.9 g/mol. To determine the molar mass, add the atomic mass of all the atoms.
When the volume and concentration of a base that completely neutralizes an acid is known, you can determine the concentration of the acid due to at the point of neutralization, the number of moles of acid equals the number of moles of base.
why does this happen? (btw this is describing titration) the criteria for the answer is
"Try to answer why the results occurred. If you are in chemistry, what is happening at the molecular level with bonding, electrons, etc. " WILL MARK BRAINLIEST!!!!
Answer:
30
Explanation:
Why does photosynthesis require 6 molecules of carbon dioxide and 6 molecules of water to make 1 molecule of glucose
For each molecule of glucose produced: 6 water water molecules are oxidized, and come to be the supply of electrons for carbon dioxide reduction. 6 molecules of carbon dioxide are required, one for every carbon atom in glucose. 6 molecules of oxygen are produced as a with the aid of made from water oxidation.
Use magnitude please. I’ll give brainilest!!! Hi
Answer:ok
Explanation:why you take picture upside down
The maps show that northern areas should get
Answer:
We might need more information too answer that question...
Explanation:
Try Inserting A picture ️ :)
how would you prepare 500 ml of a .50m solution of naoh from a 2 m stock solution
Explanation:
i.e M = m/V(L)
M= Molarity of substance
m = number of moles of substance (i.e solute)
V(L) = volume of solution in Litres
So talking about our question molarity should be 0.5 M,volume should be 0.1 L , and we should know that Molar Mass of NaOH is 40 because Atomic mass of Sodium i.e (Na known as Natrium) is 23,Atomic mass of Oxygen (O) is 16 and Atomic mass of Hydrogen is 1.
Adding them all up gives Molecular mass of NaOH as 40
So if we solve above equation we get no of moles of NaOH present in 0.1 litres of solution
Let’s do that math
Rearranging equation we get m=M×V(L) i.e m= 0.5×0.1 =0.05. So 0.05 moles of NaOH are present in 100 ml of 0.5 Molar solution
Now we also know that to find no of moles of a substance we have a formula and it is m=W/Mw where
m = no of moles of a substance
W = Mass of substance
Mw = Molecular weight of the substance
So substituting all values and rearranging equation we get mass of NaOH as
W=m×Mw = 0.05×40=2 grams
Hence we found the required mass of NaOH as 2 grams.
Now talking about shortcut
we know as explained above M=m/V(L) and m=W/M
Substituting value of m(no of moles) in M=m/V(L) we get M=WMw×V(L)
Try substituting the values yourself and get the answer
Note :: The value of Volume should always be substituted in terms of Litre only. That is the reason i used the letter (L) at all the places with V
So thats all get the answer and comment any other problems below
Hope you got your problem solved
Thanks!!!
how many moles of ammonia could be obtained from a maximum of 5.0 moles of nitrogen
Answer:
10 moles of ammonia could be obtained from a maximum of 5.0 moles of nitrogen.
Explanation:
The balanced reaction is:
N₂ + 3 H₂ → 2 NH₃
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
N₂: 1 moleH₂: 3 molesNH₃: 2 molesThen you can apply the following rule of three: if by reaction stoichiometry 1 mole of nitrogen produces 2 moles of ammonia, 5 moles of nitrogen produces how many moles of ammonia?
[tex]moles of ammonia=\frac{5 moles of nitrogen*2 moles of ammonia}{1 mole of nitrogen}[/tex]
moles of ammonia= 10
10 moles of ammonia could be obtained from a maximum of 5.0 moles of nitrogen.
Pick 1 answer, please help!
the more the energy, the larger the (a,b,c,d)?
A:crest
B:trough
C:amplitude
D:wavelength
Answer: D:wavelenght
Explanation: Students will understand that shorter wavelengths have higher frequency and energy.
Answer:
C I believe... I might be wrong though
Explanation:
How many grams of KOH are required to make 125mL of a 0.50M solution?
Answer:3.51 g
Explanation: M(KOH)= 39.10 + 16 + 1.008 = 56.108 g/mol
Amount of substance is n= m/M = cV and mass m= McV
Volume in litres is 0.125 l
Guiding Question: How might a long-term drought in a nearby forest impact the herbivores living in the forest?
Answer:
Drought can affect water sources, land, fish and wildlife and plant communities, and can also affect trees directly by slowing or arresting growth, and causing injury or death
Explanation:
You are given three liquids. You know that one of them is a suspension, one is a solution with nonelectrolytes, and the other is a solution with electrolytes. Describe the process by which you would differentiate between the three.
Answer:
decant/ filter then decompose the electrolytes by electrolysis
Explanation:
Differentiation of suspension solution is done by filtering and differentiation of electrolyte and non-electrolyte solution is done by electrolysis process.
What is electrolysis process?Electrolysis process is used to decompose the any electrolyte present in any solution into their constitute ions towards the cathodes and anodes under the electric flow of current.
Process which is required to differentiate suspension solution is filtering, because in this solution suspended insoluble particles are present which get filtered. Now to differentiate between non electrolyte and electrolyte solution we will use the electrolysis process, as non electrolyte solution do not show any behavior in this.
Hence, we use filtering and electrolysis process for the differentiation.
To know more about electrolysis, visit the below link:
https://brainly.com/question/25712870
URGENT!!! PLEASE HELP!!!
file:///home/chronos/u-83abb8ba8be89334c9d7433161c45cb8ec059a4c/MyFiles/Downloads/The_Strange_Case_of_Avogadro_Airlines.pdf
Answer:
what is your question sorry cause I don't trust hope you understandanymore feel free tell me your question you are struggling with l be glad to help you
why a dipole develops in a molecule
Answer:
Dipole interactions occur when partial charge form within a molecule because of the uneven distribution of electrons.polar molecules align so that the positive end of one molecule interacts with the negative end of another molecule.
Answer: Uneven distribution of electrons in a
Molecule.
Explanation: Q. What’s the dipole-dipole interaction ?
SOL.-
CONCEPT-
Dipole-dipole Forces -
Intermolecular interactions are necessary for the stability of the molecule. There are many types of intermolecular forces, and dipole-dipole forces are part of these forces them.
Dipole-dipole forces, also known as dipole-dipole interactions. The electrostatic forces between two permanent polar molecules is known as dipole- dipole force. Generally, the positive side of one molecule is attracted to the negative side of another molecule. The two molecules come closer, and add for increasing the stability of the substance. This type of interaction is different from a regular ionic bond or a covalent bond because there is no transfer or sharing of electrons.
Causes of a Dipole-dipole Interaction-
Dipole-dipole interaction arises due to the unlike distribution of electrons in a molecule. The electrons are assembled at one end of the molecule. Thus, the molecule get a partially negative charge at one end and a partial positive charge at the another end. That process making them polar. Generally, two polar molecules with opposite nature charges will attract one another.
Diagram-
Reference link.- https://brainly.com/question/22790347
Project code-#SPJ2
6
0/1 point
If you have 1.0 mole of each of the following compounds, which will have the most molecules?
Х
NI3 (nitrogen triiodide)
KCI (potassium chloride)
Lici (lithium chloride)
O C2H2 (ethyne)
O They all have the same number of molecules.
7
1/1 point
fn 35 moles of Iron (Fe)?
Answer:
6. They all have the same number of molecules.
7. 19.5 g
Explanation:
6. From Avogadro's hypothesis, we understood that 1 mole of any substance contains 6.02×10²³ molecules i.e
1 mole = 6.02×10²³ molecules
Considering the question given above, each compounds has just 1 mole. Thus, they will also have the same number of molecules.
7. Determination of the mass of iron (Fe)
Number of mole of Fe = 0.35 mole
Molar mass of Fe = 55.85 g/mol
Mass of Fe =?
Mass = mole × molar mass
Mass of Fe = 0.35 × 55.85
Mass of Fe = 19.5 g
Thus, the mass of 0.35 mole of iron (Fe) is 19.5 g