GIVING BRAINLIEST PLEASE HELP!!
-if you answer correctly ill give you brainliest which will give you 25pts-

Answer:

How Heavy? More than 2,300,000 limestone and granite blocks were pushed, pulled, and dragged into place on the Great Pyramid. The average weight of a block is about 2.3 metric tons (2.5 tons).

Explanation:

Answer:

x = 0.78 m = 78 cm

Explanation:

Applying the law of conservation of energy to the spring-mass system, we can write the following equation:

[tex]Kinetic\ Energy\ at\ Mean\ Position= Potential\ Energy\ at\ extreme\ position\\\frac{1}{2}mv^2 = \frac{1}{2}kx^2\\\\x^2 = \frac{mv^2}{k}\\\\x = \sqrt{\frac{mv^2}{k} }[/tex]

where,

x = maximum displacement = ?

m = mass = 3.6 kg

v = speed at mean position = 5.2 m/s

k = spring constant = 160 N/m

Therefore,

[tex]x = \sqrt{\frac{(3.6\ kg)(5.2\ m/s)^2}{160\ N/m} }\\\\[/tex]

x = 0.78 m = 78 cm

Answer:

34.27 is the answer

Answer:

Time taken to reach final velocity = 5.5 second

Explanation:

Given:

Initial velocity (Starting from rest)(u) = 0 m/s

Acceleration of ball (a) = 1 m/s²

Final velocity (v) = 5.5 m/s

Find:

Time taken to reach final velocity

Computation:

Using first equation of motion;

v = u + at

where,

v = final velocity

u = initial velocity

a = acceleration

t = time taken

5.5 = 0 + (1)(t)

5.5 = t

Time taken to reach final velocity = 5.5 second

Answer: v= 80 m/s

Explanation: speed = wavelength×Frequency

Answer:corrosion (i believe)

Explanation:

Answer

Mix baking soda and salt with hot water and cover everything with it. The proportions are not crucial, but about 1 tablespoon of salt and 1 tablespoon of baking soda to 3 dl water should do the trick. Lightly tarnished objects should clean up in a few minutes, and you just rinse them of and dry them.

Explanation:

Answer:

b

Explanation:

Answer:

A magnetic field is what causes gravity basically

Explanation:

To visualize a magnetic field think of 2 ovals on the opposite side of each-other, like one oval on the top of a circle and one on the bottom, that's how id visualize it

There is direct relationship between harmonics and resonance frequency.

Learn more about harmonic here: https://brainly.com/question/17315536

Learn more: https://brainly.com/question/23262887

Answer:

Sound energy is produced when an object vibrates. The sound vibrations cause waves of pressure that travel through a medium, such as air, water, wood or metal. Sound energy is a form of mechanical energy.

Explanation:

Answer:

100mm²

Explanation:

the other side: (50 - 20 × 2) ÷ 2 = 5

5 × 20 = 100

Answer:

Subtract given lengths: 50 - 20 = 30

Divide by 2 since there are 2 missing sides that need a length: 30 divided by 2 = 15

With the given side lengths multiply all of them to get your area.

15 x 20 = 300 is your area I am pretty sure.

Answer:

2 m/s²

Explanation:

From the question given above, the following data were obtained:

Initial velocity (u) = 2 m/s

Final velocity (v) = 6 m/s

Time (t) = 2 s

Acceleration (a) =?

The acceleration of the person can be obtained as follow:

v = u + at

6 = 2 + (a×2)

6 = 2 + 2a

Collect like terms

6 – 2 = 2a

4 = 2a

Divide both side by 2

a = 4 / 2

a = 2 m/s²

Therefore, the acceleration of the person is 2 m/s²

Answer:

voltmeter  (C. Volts)

Explanation:

The amount of electrical potential is measured by voltmeter. Electrical potential is the amount of work needed to move a unit electric charge from a reference point to the specific point in an electric field. The SI unit of electrical potential is Volt.

brainliest?

Answer:

Volts

Explanation:

Answer:

1) F = 24 N

2) Distance = 1 m

Explanation:

We are given;

Mass; m = 120 g = 0.12 kg

Initial velocity; u = 20 m/s

Final velocity; v = 0 m/s since it came to rest.

Time; t = 0.1 s

We can calculate acceleration from Newton's first equation of motion;

a = (v - u)/t

a = (0 - 20)/0.1

a = -200 m/s²

1) magnitude of the resistance will be;

F = ma

F = 0.12 × (-200)

F = -24 N

Since, we are dealing with the magnitude, we will take the absolute value. Thus, F = 24 N

2) To find the distance moved by the bullet, we know that;

Distance = Average speed × time

Thus;

Distance = ((v + u)/2) × t

Distance = ((0 + 20)/2) × 0.1

Distance = 1 m

Correct question:

Manny walked a total of 3 miles. The reference point used to calculate the total distance that he walked was the same as the ending point. Which describes where Manny most likely walked?

a. from the bottom of a hill to the top

b. on a circular nature trail

c. on a sidewalk from his house to the mall

d. from the beginning of a straight track to the end

Answer:

b. on a circular nature trail

Explanation:

As it is mentioned that Manny that his reference point from where she started is same as ending point meaning that she moved in a circular path making point B correct answer.

Answer:

on a circular nature trail

Explanation:

Answer:

It will be reflected to the principal focus of the concave mirror

Explanation:

This is because all rays parallel and close to the principal axis of a concave mirror get reflected to the principal focus of the mirror.

For a ray to be parallel to the mirror, it must be coming from an infinite distance.

So, using the mirror formula,

1/u + 1/v = 1/f where u = object distance from mirror, v =image distance form mirror and f =focal length of mirror.

Since u = infinite distance = ∞

1/u + 1/v = 1/f

1/∞ + 1/v = 1/f

0 + 1/v = 1/f

1/v = 1/f

v = f

So, the image is at the principal focus.

So, the ray of light parallel to the principal axis of the concave mirror is reflected to the principal focus of the concave mirror.

Answer:

The method explained below shows the plotting of magnetic field lines with the help of a small compass needle:

Procedure:

1. With the help of some board pins, fix a sheet of paper on a drawing board.

2. At point 1 as seen in the below figure, place a small compass needle. From the top of the needle, mark two pencil dots at exactly two ends of the needle.

3. Move the needle to the compass to point 2 so that one end of the needle coincides with the second pencil dot.

4. The process of moving the compass needle to points 3, 4, 5… is continued in order to get a few dots.

5. When various dots are joined, a straight line is obtained.

6. Hence, one line of magnetic field of earth is traced.

Starting from a different point, the process is repeated and another line of magnetic field is traced out. This way a few several lines of magnetic field can be traced out. Every line is required to be labelled with the help of an arrow from the south pole of the needle towards the north pole to represent the direction of the magnetic field. The figure below depicts several magnetic lines that are obtained this way.

Answer:

please give me brainlist and follow

Explanation:

Magnetic fields can be mapped out using small plotting compasses : place the plotting compass near the magnet on a piece of paper. mark the direction the compass needle points. move the plotting compass to many different positions in the magnetic field, marking the needle direction each time.

Answer:

Both C and D are true.

Energy goes from total kinetic to total gravitational

If Kinetic energy increases then the gravitational energy at its maximum displacement will also increase.

E (total) = PE + KE    at any point of the motion

Answer: it’s A

Explanation: I just took the test

Answer:

The boat is most likely to crash or sink since the water will be very rapid and pacing.

Answer:

The wavelength of frequency of the sound are closer to each other

Or

The frequency of the sound increases as it moves towards you

Answer:

the road has a larger coefficient of linear expansion than the dirt

the transverse Wave which is Answer:2

Answer:

1

Explanation:

amplitude is the maximum distance from the rest of the particles. amplitude is thus measured from the rest position to the peak of a crest or of a trough.

as seen below, graph 1 has an amplitude of 1 while both graph 2 and 3 has an amplitude of 2.

Answer:

3415.91 N

Explanation:

We know pressure, P at depth, h is P = ρgh where ρ = density of fluid = specific gravity × density of water = 0.55 × 1000 kg/m³ = 550 kg/m³, g = acceleration due to gravity = 9.8 m/s² and h = depth of water = 650 mm = 0.650 m

So, P = ρgh

= 550 kg/m³ × 9.8 m/s² × 0.650 m

= 3503.5 N/m²

Now pressure P = F/A where F = force on the side of tank and A = area of side of tank = depth of water × width of tank = 0.650 m × 1.5 m = 0.975 m²

So, F = PA

= 3503.5 N/m² × 0.975 m²

= 3415.913 N

≅ 3415.91 N

Answer:

reduce, reuse, and recycle paper,plastic, electricity, glass, fiber

Answer:

A) As the ambulance's siren moves toward a stationary hearer, the quality of sound will have a higher pitch

B) As the ambulance's siren moves away from a stationary hearer, the quality of sound will have a lower pitch.

Explanation:

From Doppler effect, the closer the source of sound gets to the observer, the higher the frequency and in turn the higher the pitch.

Meanwhile, the farther a source goes from an observer, the lower the frequency of the sound and also the lower the pitch.

Thus, as the ambulance's siren moves toward a stationary hearer, the quality of sound will have a higher pitch.

As the ambulance's siren moves away from a stationary hearer, the quality of sound will have a lower pitch.

Answer:

a. The quality of the sound would have a high pitch and thus be loud.

b. The quality of the sound would have a low pitch and thus would have a lower volume than the sound from the source.

Explanation:

Using the formula for Doppler shift f' = (v ± v')f/(v ± v") where v = speed of sound in air, v'= speed of hearer = 0 m/s (since he is stationary), v" = speed of ambulance and f = frequency of sound from ambulance

So, f' = (v ± v')f/(v ± v")

f' = (v ± 0)f/(v ± v")

f' = vf/(v ± v")

a. What is the quality of the sound of an ambulance's siren when it moves toward a stationary hearer?

Since the source (ambulance) moves towards the detector, (hearer), we would get an upwards shift in frequency. (Since our denominator has to be a minimum, so we use the minus sign for v"). So, the quality of the sound would have a high pitch and thus be loud.

b. What is the quality of the sound of an ambulance's siren when it moves away from a stationary hearer?

Since the source (ambulance) moves away the detector, (hearer), we would get a downward shift in frequency. (Since our denominator has to be a maximum, so we use the plus sign for v"). So, the quality of the sound would have a low pitch and thus would have a lower volume than the sound from the source.