given y=3x^2 2x, find dy/dt when x=-5, how do you find dy/dt when x=2? .

The null and alternative hypothesis: H0: p = 0.35, HA: p ≠ 0.35

What is hypothesis?

A hypothesis is an idea or explanation that is proposed and then tested through research and analysis to determine if it is supported by evidence or not. In statistics, a hypothesis is a statement about a population parameter, such as a mean or proportion, that is either true or false.

In this situation, we want to test whether the percentage of CEOs with an MBA has changed or not. We can set up two hypotheses, the null hypothesis (H0) and the alternative hypothesis (HA). The null hypothesis is the default position, which we assume to be true unless there is sufficient evidence to reject it. The alternative hypothesis represents the opposite of the null hypothesis, and it is what we want to test for.

In this case, the null hypothesis is that the percentage of CEOs with an MBA is equal to 35%, which means there is no change in the proportion. The alternative hypothesis is that the percentage of CEOs with an MBA is different from 35%, which implies a change in the proportion. Therefore, we have:

H0: P = 0.35

HA: P ≠ 0.35

where P represents the proportion of CEOs with an MBA.

To learn more about hypothesis visit:

https://brainly.com/question/606806

#SPJ1

True, The One Way Repeated Measures ANOVA is used when you have a quantitative DV and an IV with three or more levels that is within subjects in nature.

The statement is true and explained as follows:

The One Way Repeated Measures ANOVA is a statistical technique that is used to analyze data from experiments where the same participants are exposed to multiple levels of an independent variable (IV). This type of experimental design is known as a within-subjects design, as opposed to a between-subjects design, where different participants are used for each level of the IV.

One of the main advantages of using a within-subjects design is that it allows for more efficient use of participants. By exposing each participant to all levels of the IV, the variability between participants is reduced, which in turn increases the power of the statistical analysis.

The One Way Repeated Measures ANOVA is specifically used when the dependent variable (DV) is quantitative, meaning that it can be measured using numerical values. Additionally, the IV must have three or more levels, meaning that there are at least three different conditions that participants are exposed to.

The basic idea behind the One Way Repeated Measures ANOVA is to compare the mean scores of the DV across the different levels of the IV while taking into account the fact that the same participants are being used for each level. This is done by calculating the within-subjects variability, which is the variability in the scores of the DV that is due to individual differences between participants. The within-subjects variability is then compared to the between-subjects variability, which is the variability in the scores of the DV that is due to the different levels of the IV.

The statistical output from the One Way Repeated Measures ANOVA includes an F-test, which compares the within-subjects variability to the between-subjects variability. If the F-test is statistically significant, this indicates that there is a significant difference between at least two of the levels of the IV.

In conclusion, the One Way Repeated Measures ANOVA is a useful statistical technique for analyzing data from within-subjects experiments with a quantitative DV and an IV with three or more levels. By taking into account the fact that the same participants are used for each level, the One Way Repeated Measures ANOVA can provide a more efficient and powerful analysis of experimental data.

Learn more about The One Way Repeated Measures ANOVA :

https://brainly.com/question/30890322

#SPJ11

Answer:

Range

Step-by-step explanation:

Mean (Average) 34

Median 37

Mode All values appeared just once.

Range 41

Answer: Range

Step-by-step explanation:

Mean, means average, add all of the numbers and divide by how many there are.

Mean = [tex]\frac{(42+28+35+39+53+12+19+44)}{y\8}[/tex]  = 34

Median, put all the numbers in order and the middle number is your median.

12    19    28    35    39    42    44    53

                             |

The line indicates the middle.  Since the middle is not on a number, you must take the average of the 2 middle numbers.  Meaning add the 2 numbers and divide by 2

Median = (35+39)/2 = 37

Mode, the number that occurs the most times is the mode.  Since none of the numbers occurs more than once. There is no mode

Mode = none

Range, largest number minus smalles number.  The numbers range from 12 to 53

Range = 53-12 =41

If Mean=34

Median =37

Mode=none

Range=41     Range is highest

The measure of angle A and B shown in triangle ABC are 61.4° and 28.6° respectively

An equation is an expression that shows how numbers and variables are related to each other using mathematical operations.

From the image shown, using trigonometric rations:

tanA = 11/6

A = 61.4°

Also, for the angle B:

tanB = 6/11

B = 28.6°

The measure of angle A and B are 61.4° and 28.6° respectively

Find out more on equation at: https://brainly.com/question/2972832

#SPJ1

(a) The conditional PDF is f_X(x|A) = 1/14 for -7 ≤ x ≤ 7 and 0 otherwise.

A continuous uniform random variable defined on the interval (-9, 9) and the event A = {X: |X| ≤ 7}.


The event A implies that the random variable X lies in the interval [-7, 7]. In this interval, X is still uniformly distributed.

Since the length of the interval is 14, the PDF is 1/14, indicating a constant probability density within the given interval. Outside of this interval, the probability density is 0, as the event A does not cover those values of X.

To know more about conditional PDF click on below link:

https://brainly.com/question/31484741#

#SPJ11

To find the orthogonal trajectories of the family of curves y = 17kx, we need to follow some steps including differentiation or reciprocal etc.

Steps are:
Step 1: Differentiate the given equation with respect to x.
Differentiating both sides with respect to x, we have:
dy/dx = 17k

Step 2: Find the negative reciprocal of dy/dx.
The negative reciprocal of dy/dx is the slope of the curve orthogonal to the given family of curves: -(dx/dy) = -1/(17k)

Step 3: Solve the new differential equation.
Now, we need to solve the new differential equation: dx/dy = 1/(17k)

Notice that k is a constant, so let's rewrite the equation as: dx/dy = C, where C = 1/(17k)

Step 4: Integrate both sides of the equation.
Integrate dx/dy with respect to y:
∫(1) dx = ∫(C) dy

x = Cy + D, where D is the constant of integration.

Step 5: Express the equation in terms of y and x.
Now, substitute the original equation y = 17kx back into our orthogonal trajectory equation:

y = (1/C)(x - D)

This is the equation for the orthogonal trajectories of the family of curves y = 17kx, where C and D are constants related to k.

To learn more about “integration” refer to the https://brainly.com/question/22008756

#SPJ11

The given statement "no matter what the resource allocation is, area A will always have the highest resource availability," is not essentially true.

The term "area" generally refers to a specific region or part of a larger space. In the context of your question, area A represents a particular zone with resources allocated to it. Resource availability refers to the quantity and accessibility of resources in a given area.

To claim that area A will always have the highest resource availability regardless of resource allocation, it implies that there are factors inherent to area A that consistently make it the most resource-rich zone. This could be due to natural resource distribution, infrastructure, or other variables that ensure area A maintains the highest resource availability.

However, without additional information about area A and the specific resources in question, it is difficult to definitively state that area A will always have the highest resource availability.

To learn more about area visit : https://brainly.com/question/25292087

#SPJ11

The slope and y-intercept of the linear function graphed include the following:

slope = -1/2.

y-intercept = 1.

In Mathematics and Geometry, the slope-intercept form of the equation of a straight line is given by this mathematical expression;

y = mx + c

Where:

First of all, we would determine the slope of this line;

Slope (m) = (y₂ - y₁)/(x₂ - x₁)

Slope (m) = (0 - 1)/(0 - 2)

Slope (m) = -1/2

For the y-intercept, we have:

y-intercept = 1.

Read more on slope-intercept here: brainly.com/question/4074155

#SPJ1

Missing information:

The question is incomplete and the complete question is shown in the attached picture.

If 40% of the students on the museum trip love the museum, then the remaining 60% don't love the museum. To find out how many students love the museum, we can multiply the total number of students by the percentage who love the museum:

Number of students who love the museum = 40% of 240 students

= 0.4 x 240

= 96 students

Therefore, 96 students on the field trip love the museum.

(a) (A^T)^T = A: The transpose of a matrix A, denoted as A^T, is obtained by interchanging its rows and columns. If we take the transpose of A^T, we will revert back to the original arrangement of elements in A. Thus, (A^T)^T = A.

(b) (AB)^T = B^T A^T: When we multiply two matrices A and B, we get a new matrix AB. The transpose of this product, (AB)^T, is obtained by interchanging its rows and columns

In exercise 1, we have the following matrices and scalars:
- A = [1 2 3; 4 5 6]
- B = [7 8; 9 10; 11 12]
- c = 3
- d = -2
Now, let's verify the properties in exercises 3-4 using these values:
Exercise 3:
(a) (A^T)^T = A
To verify this property, we need to take the transpose of A and then take the transpose of the result. If we end up with the original matrix A, then the property is satisfied.
Transpose of A:
[1 2 3;
4 5 6]
becomes
[1 4;
2 5;
3 6]
Now we take the transpose of this result:
[1 2 3;
4 5 6]
which is the original matrix A. Therefore, (A^T)^T = A and the property is satisfied.
(b) (AB)^T = B^T A^T
To verify this property, we need to take the transpose of AB and compare it to the product of B^T and A^T. If they are equal, then the property is satisfied.
Transpose of AB:
[58 64 70;
139 154 169]
B^T:
[7 9 11;
8 10 12]
A^T:
[1 4;
2 5;
3 6]
Now we take the product of B^T and A^T:
[58 64 70;
139 154 169]
which is the same as the transpose of AB. Therefore, (AB)^T = B^T A^T and the property is satisfied.
Exercise 4:
(a) (cA)^T = cA^T
To verify this property, we need to take the transpose of cA and compare it to the product of c and A^T. If they are equal, then the property is satisfied.
Transpose of cA:
[3 6 9;
12 15 18]
cA^T:
[3 6 9;
12 15 18]
They are equal, therefore (cA)^T = cA^T and the property is satisfied.
(b) (dA)^T = dA^T
To verify this property, we need to take the transpose of dA and compare it to the product of d and A^T. If they are equal, then the property is satisfied.
Transpose of dA:
[-2 -4 -6;
-8 -10 -12]
dA^T:
[-2 -4 -6;
-8 -10 -12]
They are equal, therefore (dA)^T = dA^T and the property is satisfied.
To answer your question, let's verify the properties of matrix transposition for the given matrices A and B, and the scalars in exercise 1.
(a) (A^T)^T = A
The transpose of a matrix A, denoted as A^T, is obtained by interchanging its rows and columns. If we take the transpose of A^T, we will revert back to the original arrangement of elements in A. Thus, (A^T)^T = A.
(b) (AB)^T = B^T A^T
When we multiply two matrices A and B, we get a new matrix AB. The transpose of this product, (AB)^T, is obtained by interchanging its rows and columns. According to the property of matrix transposition, the transpose of the product of two matrices is equal to the product of their transposes in reverse order. Therefore, (AB)^T = B^T A^T.
These verifications confirm that the matrices and scalars in exercise 1 satisfy the stated properties.

To learn more about matrix, click here:

brainly.com/question/29132693

#SPJ11

Let's consider the specific product of packaged food items, such as canned goods and dry goods, which are transported from a warehouse to a grocery store.

Distance: The distance between the warehouse and grocery store will affect the transportation cost. The farther the distance, the higher the freight rate will be.

Weight: The weight of the packaged food items will also impact the freight rate. The heavier the items, the higher the cost of transportation.

Density: The density of the packaged food items is a measure of how much space they occupy in relation to their weight. If the items are low in density, they may take up more space on a truck, and therefore, the freight rate will be higher.

Stowability: The stowability of the packaged food items refers to how easy they are to store and stack on a truck. If the items are difficult to stack, more space may be required, and the freight rate will be higher.

Handling: The handling of the packaged food items is also a factor in determining the freight rate. If the items require special handling, such as refrigeration or careful stacking, the freight rate will be higher.

Liability: Liability refers to the risk of damage or loss of the packaged food items during transportation. If the items are fragile or perishable, the freight rate will be higher to cover the higher risk of damage or loss.

Market: The market conditions, such as supply and demand, will also influence the freight rate. If there is a high demand for transportation services or a shortage of trucks, the freight rate will be higher.

Overall, the freight rate for transporting packaged food items will depend on multiple factors, including distance, weight, density, stowability, handling, liability, and market conditions. Transport companies will consider all of these factors when determining the freight rate for a particular shipment.

to know ore about product

brainly.com/question/22852400

#SPJ1

Step-by-step explanation:

To show that the system is uneconomical if four deliveries are made in a day, we need to find the profit (Y) for x machines and 4 deliveries:

Y = 12x - 2a - a (for 4 deliveries)

Y = 12x - 3a

We know that processing all deliveries must be done in a single day, so we have:

a = 4x

Substituting this into the profit formula, we get:

Y = 12x - 3(4x)

Y = 0

This means that the profit (Y) is zero when four deliveries are made in a day, making the system uneconomical.

To find the number of machines that would be used in order for profit to be maximized for four deliveries in a day, we need to differentiate the profit formula with respect to x and set it equal to zero to find the maximum:

dY/dx = 12 - 6a = 0 (for a = 4x)

Solving for x, we get:

12 - 6(4x) = 0

12 - 24x = 0

x = 1/2

Therefore, the maximum profit would be obtained by using 1/2 of a machine (which is not physically possible, so we would round up to one machine) for processing four deliveries in a day.

The coordinates of z with respect to the basis E are:

[z]E = (1/3, 7/9)^T.

To determine the coordinates of a vector in the basis E, we need to express the vector as a linear combination of the basis vectors and then solve for the coefficients.

First, let's write the vectors x, y, and z in terms of their coordinates with respect to the standard basis:

x = (1, 1)^T
y = (1, -1)^T
z = (10, 7)^T

To find the coordinates of x with respect to the basis E, we need to write x as a linear combination of the basis vectors in E:

x = a(5, 3)^T + b(3, 2)^T

Solving for a and b, we get:

a = (2/3) and b = (1/3)

Therefore, the coordinates of x with respect to the basis E are:

[x]E = (2/3, 1/3)^T

Similarly, we can find the coordinates of y with respect to the basis E:

y = a(5, 3)^T + b(3, 2)^T

Solving for a and b, we get:

a = (1/3) and b = (-1/3)

Therefore, the coordinates of y with respect to the basis E are:

[y]E = (1/3, -1/3)^T

Finally, we can find the coordinates of z with respect to the basis E:

z = a(5, 3)^T + b(3, 2)^T

Solving for a and b, we get:

a = (1/3) and b = (7/9)

Therefore, the coordinates of z with respect to the basis E are:

[z]E = (1/3, 7/9)^T.

Visit to know more about Coordinates:-

brainly.com/question/30227780

#SPJ11

Tthe matrices B and Y must be invertible for the given formula to hold true. As for the specific choices given, both options of XB and YYXB include an invertible matrix B, so they satisfy the requirement.

In order for the given formula to hold true, both matrices [A B] and [I 0] must be invertible. This is because the product of two invertible matrices is also invertible.

However, based on the given formula, we can also see that matrix Y must be invertible. This is because if Y is not invertible, then the matrix [0 I] would not be invertible, and therefore the entire equation would not hold true.

the matrices B and Y must be invertible for the given formula to hold true.

As for the specific choices given, both options of XB and YYXB include an invertible matrix B, so they satisfy the requirement.

Based on the given formula:

[ A  B ] [ I  0 ] = [ 0  I ]
[ C  0 ] [ X  Y ]   [ Z  0 ]

Let's analyze each part of the matrix equation:

1. [ A  B ] [ I  0 ] = [ 0  I ]
2. [ C  0 ] [ X  Y ] = [ Z  0 ]

From equation (1), we have AI + BX = 0 and BI = I, which means B is invertible. From equation (2), we have CX = Z and 0Y = 0, which means X is invertible.

Therefore, the matrices B and X must be invertible. Your answer is "B and X".

to learn more about invertible matrix click here:

https://brainly.com/question/30754589

#SPJ11

The area under the given standard normal curve is approximately 0.1463

To find the area under the standard normal curve to the left of z=-1.51 and to the right of z=1.4, follow these steps:

1. Look up the z-scores in the standard normal table (also known as the z-table).
2. Find the area associated with z=-1.51 and z=1.4.
3. Add the areas together.

Using the z-table:
- For z=-1.51, the area to the left is 0.0655.
- For z=1.4, the area to the right is 1 - 0.9192 = 0.0808.

Now, add the areas together:
0.0655 + 0.0808 = 0.1463

So, the area under the standard normal curve to the left of z=-1.51 and to the right of z=1.4 is approximately 0.1463, rounded to four decimal places.

Learn more about standard normal curve

brainly.com/question/29184785

#SPJ11

The Total taxes owed: $6,919.00 which is option B

To calculate taxes owed on a $51,100 income using the marginal tax rate chart:

10% bracket: $1,027.50

12% bracket: $3,708.00

22% bracket: $2,183.50

Total taxes owed: $6,919.00 which is option B

Taxes are compulsory obligations billed by individuals and firms to the state to fund public utilities and services like infrastructure, instruction, and medical care.

The sum of taxes paid varies depending on income, assets, and other elements, and not settling them can end up in fines or court sanctions.

Read more about taxes here:

https://brainly.com/question/1775528

#SPJ1

The points (3,5) and (6,5) would be good choices for the line of best fit.

To find the line of best fit, we want to draw a straight line through the points that best represents the overall trend of the data. This line should pass through as many points as possible while minimizing the distance between the points and the line.

To find the two points that the line of best fit should pass through, we want to select points that are close to the overall trend of the data and are not outliers.

To find the equation of the line of best fit, we can use a method called linear regression. This involves finding the equation of the straight line that minimizes the sum of the squared distances between the line and the points on the scatter plot.

Once we have the equation of the line of best fit, we can use it to make predictions about the data.

To know more about scatter plot here

https://brainly.com/question/29231735

#SPJ1

Answer:

SOLUTION

EQUATION

DIVIDE

VOTE

F

First, we need to convert the speed from miles per hour to inches per second. There are 5280 feet in a mile and 12 inches in a foot, so:

15 miles per hour = (15 x 5280 x 12) inches per hour, = 950400 inches per hour
To get inches per second, we divide by 3600 (the number of seconds in an hour):
950400 inches per hour ÷ 3600 seconds per hour = 264 inches per second
Next, we need to use the formula for angular velocity:

angular velocity = velocity / radius, The radius of the tire is half the diameter, or 15 inches. So: angular velocity = 264 inches per second / 15 inches, = 17.6 radians per second, Rounding to the nearest hundredth and using pi in our answer, we get: angular velocity ≈ 17.60π radians per second.

To know more about number click here

brainly.com/question/28210925

#SPJ11

The surface area of the cylinder given is approximately calculated as: 960.84 square meters.

The surface area of a cylinder can be found by adding the areas of its curved surface (lateral area) and its two circular bases.

If the cylinder has a radius of r and a height of h:

Surface Area = 2πr(h + r)

Given the following:

Radius (r) = 9 m

Height (h) = 8 m

π = 3.14

Substitute:

Surface area of the cylinder = 2 * 3.14 * 9(8 + 9)

= 56.52(17)

= 960.84 square meters.

Learn more about the surface area of a cylinder on:

https://brainly.com/question/20720526

#SPJ1

To write the vector w in the form [c1,c2,c3,c4], we can simply list the components of w in order. So our final answer is w = [c1, c2, c3, c4] (where c1, c2, c3, and c4 are the components of the vector w that we found using the cross product).

To find a non-zero vector w∈R4 which is orthogonal to all of the given vectors, we can use the cross product. Let's call the given vectors u1, u2, u3, and u4. Then we can find w as:

w = u1 x u2 x u3 x u4

where "x" represents the cross product. This means we take the cross product of u1 and u2, then take the cross product of that result with u3, and so on until we have taken the cross product of all four vectors.

The resulting vector w will be orthogonal to all of the given vectors, since the cross product of two vectors is always orthogonal to both of the original vectors.

Know more about vector here:

https://brainly.com/question/29740341

#SPJ11

The capacity of the process is approximately 29.79 shirts per minute.

To calculate the capacity of the process, we first need to find the total processing time of the current process.

For the first resource, with 2 workers and a processing time of 500 seconds per worker, the total processing time is:
500 seconds/worker * 2 workers = 1000 seconds

For the second resource, with 10 workers and a processing time of 2800 seconds per worker, the total processing time is:
2800 seconds/worker * 10 workers = 28000 seconds

Therefore, the total processing time for the current process is:
1000 seconds + 28000 seconds = 29000 seconds

To find the capacity of the process, we can use the formula:
Capacity = 3600 seconds/hour / Total Processing Time (in seconds) * Number of resources

In this case, we have 2 resources, so:
Capacity = 3600 seconds/hour / 29000 seconds * 2 resources
Capacity = 0.2483 shirts per second * 2 resources
Capacity = 0.4966 shirts per second

To convert to shirts per minute, we can multiply by 60:
Capacity = 0.4966 shirts per second * 60 seconds/minute
Capacity = 29.79 shirts per minute

To know more about capacity refer to

https://brainly.com/question/29707733

#SPJ11

The answer of the given question based on differential equation is ,

y² = (3/13)(C - x⁴)

An equation is mathematical statement that indicates  equality of two expressions. It consists of variables, constants, and mathematical operations like addition, subtraction, multiplication, division, exponentiation, etc. An equation can be written in different forms depending on the type of equation, like linear, quadratic, polynomial, trigonometric, exponential, or logarithmic.

The given differential equation is:

dy/dx = 4x³/(3x² + 13y²)

To find  general solution, we need to separate variables and integrate both sides:

(3x² + 13y²) dy = 4x³ dx

Integrating both sides:

∫(3x² + 13y²) dy = ∫4x³ dx

Simplifying and solving the integrals:

x⁴ + (13/3)y³ = x⁴ + C

where C is the constant of integration.

Therefore, the general solution to the given differential equation is:

y² = (3/13)(C - x⁴)

where C is an arbitrary constant.

To know more about Expression visit:

https://brainly.com/question/1859113

#SPJ1

Given

1.  y'-y = x

2. y' = sqrt(x+y+1) -1

Solution

To solve the differential equation y' - y = x, we can use the method of integrating factors.First, we must rewrite the equation as follows:

y' - y = f(x)

where f(x) = x. Then, we can multiply both sides by the integrating factor e^(-x):

e^(-x) y' - e^(-x) y = xe^(-x)

The product rule can be used to rewrite the left side:

(e^(-x) y)' = xe^(-x)

When we integrate both sides in relation to x, we get:

e^(-x) y = ∫xe^(-x) dx + C

where C is the constant of integration. The integral on the right-hand side can be evaluated using integration by parts:

∫xe^(-x) dx = -xe^(-x) - ∫e^(-x) dx = -xe^(-x) - e^(-x) + D

where D is another constant of integration. As a result, the differential equation's solution is:

y = e^x (∫xe^(-x) dx + C) + De^x

Substituting the integral back in, we get:

y = x - 1 + Ce^x + De^x

where C and D are constants.

To solve the differential equation y' = sqrt(x+y+1) -1, we can use separation of variables. First, we can add 1 to both sides of the equation:

y' + 1 = sqrt(x+y+1)

Then, we can square both sides:

(y' + 1)^2 = x+y+1

Expanding the left-hand side and simplifying, we get:

y'^2 + 2y' + 1 = x+y+1

Rearranging the terms, we get:

y'^2 + 2y' - y = x

This is a nonlinear first-order differential equation, which cannot be solved using separation of variables or integrating factors. However, we can recognize it as a Bernoulli equation, which can be transformed into a linear differential equation by making the substitution:

u = y' - 1

Then, we have:

y' = u + 1

y'' = u''

We get by substituting these expressions into the original equation and simplifying:

(u+1)^2 - (u+1) - y = x

u^2 + u - y - x = 0

This is a quadratic equation in u, which can be solved using the quadratic formula:

u = (-1 ± sqrt(1 + 4y + 4x))/2

Substituting back the expression for u, we get:

y' = (-1 ± sqrt(1 + 4y + 4x))/2 + 1

y' = (-1 ± sqrt(1 + 4y + 4x))/2 + 2/2

y' = (-1 ± sqrt(1 + 4y + 4x) + 2)/2

y' = (sqrt(1 + 4y + 4x) - 1)/2

This is the solution to the differential equation.

For such more question on differential equation

brainly.com/question/1164377

Answer:

a) 5p (or 5q)

b) 5p ( or 5q)

c) 10p (or 10q)

Step-by-step explanation:

We will use the following information for solving and using the given figure

Preliminary computation

We have [tex]\overrightarrow{AB} = \overrightarrow{BC}[/tex]

Therefore 4p + q = 5p

5p = 4p + q

5p-4p = q

p = q

[tex]\overrightarrow{AB} = 4p + q = 4p + p = 5p = 5q\\[/tex]

So each side is 5p in length which is also equal to 5q since p = q

Part a

[tex]\overrightarrow{AO} = \overrightarrow{OA} = \overrightarrow{AB} = 5p[/tex]  (same as 5q)

Part b

[tex]\overrightarrow{OB} = \overrightarrow{OA} = 5p[/tex]   (same as 5q)

Part c
[tex]\overrightarrow{EB} = 2 \cdot \overrightarrow{OB} = 2 \cdot 5p = 10p[/tex]   (also 10q)

n k denote the number of partitions of n distinct objects into k nonempty subsets which show that n 1 k = k n k n k−1

To show that n1k = knk nk-1, we can use a combinatorial argument.

First, we note that n1k represents the number of ways to partition n distinct objects into k nonempty subsets, with no regard for the order of the subsets.

On the other hand, knk represents the number of ways to partition n distinct objects into k nonempty subsets, where the order of the subsets matters.

We can think of this as first choosing a subset for object 1 from the k subsets available, then choosing a subset for object 2 from the remaining k-1 subsets, and so on. The total number of ways to do this is k * (k-1) * ... * 2 * 1 = k!.

Now, let's consider the following process for constructing a partition of n objects into k nonempty subsets:

The total number of ways to do this is the product of the number of choices at each step, which is:

n choose k * (n-k) choose (k-1) * (n-2k+2) choose (k-2) * ... * k choose 1

We can simplify this expression using the identity:

m choose r = m! / (r! * (m-r)!)

Substituting this identity into the product above and simplifying, we obtain:

n1k = n! / [k! * (n-k)!] = knk / k = knk (n-k)! / k! = knk nk-1

Therefore, we have shown that n1k = knk nk-1.

Learn more about nonempty subsets

brainly.com/question/31308829

#SPJ11

Answer:

a

Step-by-step explanation:

(a)

Let's call the distance that April travels from her starting point to the rest station "d". Then the distance that May travels from her starting point to the rest station is also "d". Since they both end up at the midpoint of the trail, we know that:

d + d = 15

Simplifying:

2d = 15

d = 7.5

We also know that April arrived at the rest station 40 minutes earlier than May. Since they both travelled the same distance, we can use the formula:

time = distance / speed

Let's call the time taken by April to reach the rest station "t". Then the time taken by May is:

t + 40/60 = t + 2/3

We know that April jogged at an average speed of r km/h, so:

t = d / r = 7.5 / r

May walked at an average speed that was 3 km/h less than April's jogging speed, so:

t + 2/3 = d / (r - 3) = 7.5 / (r - 3)

Now we can express t in terms of r:

7.5 / r + 2/3 = 7.5 / (r - 3)

Multiplying both sides by 3r(r - 3):

22.5(r - 3) + 2r(r - 3) = 22.5r

Expanding and simplifying:

24r - 135 = 0

(b)

To get the equation in the required form, we need to express r in terms of x, where x = r - 12. Substituting x + 12 for r in the equation above, we get:

24(x + 12) - 135 = 0

24x + 273 = 0

24x = -273

x = -273/24

Multiplying both sides by -12 and subtracting from 477, we get:

477 - 12x - 135 = 0

(c)

Substituting the value we got for x into x + 12, we get:

r = -273/24 + 12

r = 15/8

So April's average jogging speed was 15/8 km/h, or approximately 1.875 km/h.

First, let's recall the definition of the subspace spanned by e1 and e2. This means that s is the set of all linear combinations of e1 and e2. In other words, any vector in s can be written as a scalar multiple of e1 plus a scalar multiple of e2.

Now, to find L(S) for each linear operator L in exercise 17, we simply need to apply L to every vector in s. Since s is spanned by e1 and e2, we can express any vector in s as a linear combination of e1 and e2:

v = ae1 + be2 where a and b are scalars. Then, we can apply L to v: L(v) = L(ae1 + be2)

Since L is a linear operator, we know that it satisfies the properties of linearity: L(x + y) = L(x) + L(y) L(cx) = cL(x) for any vectors x and y and any scalar c.

Therefore, we can apply these properties to L(ae1 + be2): L(v) = L(ae1) + L(be2) = aL(e1) + bL(e2) where we have used the fact that e1 and e2 are vectors in R^3 and therefore can be operated on by L.

So, to summarize: - We start with a vector v in s, which can be expressed as v = ae1 + be2

We apply L to v, using the linearity properties of L: L(v) = L(ae1 + be2) = L(ae1) + L(be2) = aL(e1) + bL(e2)

Therefore, L(S) is the set of all vectors that can be expressed in the form aL(e1) + bL(e2), where a and b are scalars.

Know more about subspace spanned,

https://brainly.com/question/31061248

#SPJ11

Answer:

1. 25/18 ft³

2. 1/216 ft³

Step-by-step explanation:

So all we need to do to calculate the volume is multiply each length gollowing the formula: V= S1×S2×S3

so that being said we transform each unit into sixth parts:

6/6 ft×5/6 ft× 10/6ft.

so we multiply the numerators and denominators, leaving us with 300/216 ft³ (ft×ft=ft², ft×ft×ft=ft³)

if we simplify by dividing both factors by 12, because that is the same result ( 3/6 is the same as 1/2) and we are left with 25/18 ft³

So that is answer 1

Answer 2, because we already have 300/216, that is the full prism, we just divide it by the number of cubes there are, and that is 300.

We are left with 1/216.

I hope this was helpful.

Part A:

An open circle on a number line represents that the value at that point is not included in the solution set of the inequality.

This means that the boundary point is not a valid solution to the inequality. It is used when the inequality is strict, such as x < 5, where 5 is not included in the solution set.

Part B:

A closed circle on a number line represents that the value at that point is included in the solution set of the inequality.

This means that the boundary point is a valid solution to the inequality. It is used when the inequality is non-strict, such as x ≤ 5, where 5 is included in the solution set.

Part C:

The shading on the number line represents the set of all values that satisfy the inequality.

The shaded region includes all the points that satisfy the inequality, and may extend to either the left or right of the boundary points, depending on the direction of the inequality.

The shading may be above or below the line, depending on whether the inequality involves greater than or less than.

Learn more about inequalities on:

https://brainly.com/question/24372553

#SPJ1