Jupiter affect observations of the Sun, from the viewpoint of an alien astronomer, by causing the Sun to move in a small ellipse with an orbital period of about twelve years. The correct option is option a.
Being the fifth closer planet to our Sun, Jupiter is the biggest planet in our Solar System. Jupiter is one of the gas giants in the Solar System.
From the Sun, Jupiter's average distance is about 480 million miles, and it takes nearly twelve years for Jupiter to make one revolution. Jupiter has a ring, albeit flat and small, like the rest of the gas giants. Jupiter's rotation is the fastest of all planets in the Solar System, rotating once on its axis every ten hours.
From the viewpoint of an alien astronomer outside our Solar System, the Sun will look as if it orbits Jupiter and takes 12 years to complete a revolution. Planets in general have orbits that are elliptical.
Learn more about Jupiter here: https://brainly.com/question/15044627.
#SPJ4
In the definition of weight, W = mg, the mass m refers to an inertial mass.
True or false
Answer:
True
Explanation:
In the definition of weight, W = mg, the mass m refers to an inertial mass.
What is the linear diameter (in meters) of an object that has an angular diameter of 25 arcseconds and a distance of 65 km
The linear diameter of an object with an angular diameter of 25 arcseconds and a distance of 65 km will be 0.067 meters.
Linear Diameter = (Angular Diameter ×Distance) / 206264.81.
In this case, the linear diameter would be 0.067 meters.
To put this into context, a linear diameter of 0.067 meters is approximately equal to 6.7 centimeters, or 2.6 inches. To put this another way, it is approximately the size of a large grape. As such, it is incredibly small and would be difficult to see with the eye.
Therefore the linear diameter of the object is 0.067 meters
Learn more about l diameter:
https://brainly.com/question/29270581
#SPJ4
According to legend, the evidence that stimulated Newton to propose the law of universal gravitation emerged from a study of ____. a. the motion of the moon and other celestial or heavenly bodies b. the fall of an apple to the Earth c. the gravitational interaction of smaller objects upon the Earth d. ...nonsense! There was no evidence; it was just proposed as a theory.
According to legend, the evidence that stimulated Newton to propose the law of universal gravitation emerged from a study of the motion of the moon and other celestial or heavenly bodies.
Newton made a comparison between the moon's acceleration and that of earthly objects. Newton was able to make a significant discovery regarding the relationship between gravity and distance by assuming that gravitational forces were in charge of each.
He came to the conclusion that the force of gravitational attraction between the Earth and other objects is inversely proportional to the separation between the centres of the two objects as a result of this comparison. But there are other factors than distance that might impact how strong a gravitational force is.
To know more about gravitation:
https://brainly.com/question/12720301
#SPJ4
On a frictionless surface, a 2-kilogram cart moves at a velocity of 3 meters per second west and hits a 4-kilogram cart that is not moving, initially. The two carts stick together and move off at a slower speed to the west. What is this slower speed?
a. 0. 5 meters/second
b. 1 meter/second
c. 1. 5 meters/second
d. 2 meters/second
Answer:
b
Explanation:
Use law of conservation of momentum
momentum before = momentum after hit
2 kg * 3 m/s = ( 2 + 4) kg * x m/s
solve for x = 1 m/s
1. Two objects with the same mass move toward each other with the same speed and experience an elastic collision. Compare the final velocities of each object to their initial velocities
Answer:
M1 U1 + M2 U2 = ( M1 + M2 ) V
Explanation:
they rebounce, therefore it's elastic.
An object that is moving in uniform circular motion will definitely have a large acceleration if it is
If a circular motion is accelerated, it will undoubtedly have a high Turning at a rapid rate.
What happens when something moves uniformly in a circle?When an object travels along a circular path at a constant speed, it is said to be in uniform circular motion (UCM).So because object's direction was constantly shifting, the velocity doesn't really remain constant along with the speed.To maintain a circular course, the object must speed up toward the the circle's center.
Is the rate of acceleration constant in uniform circular motion?As the particle moves in a circle, its direction of acceleration is continuously changing since it is continually moving toward the center.As a result, it is variable.
To know more about large acceleration visit:
https://brainly.com/question/773522
#SPJ4
he cars mass was only 111 kg. Suppose two of these cars are used in a stunt crash for an action film. If one car's initial velocity is 9.00 m/s to the right and the other car's velocity is 5.00 m/s to the left, how much kinetic energy is discinated in the crash
In the crash 5883 Joule kinetic energy is discinated when two of these cars are used in a stunt crash for an action film.
How do you use start kinetic energy to calculate end kinetic energy?Final kinetic energy (KE) is equal to 1/2 m1v'12 + 1/2 m2v'22 , or joules. The end kinetic energy for common things will be lower than the starting point. The only way you can increase kinetic energy is if the impact causes an energy release of some type.
How can total kinetic energy be calculated?As a result, the kinetic energy equation states that it is equal to 1/2 the object's mass times the magnitude of its velocity squared, or speed squared.
Initial kinetic energy KE,
[tex]KE=1/2 m_1v_1^2 + 1/2 m_2v_2^2[/tex]
[tex]KE=1/2 (111)(9.00)^2 + 1/2 (111)(5.00)^2[/tex]
[tex]KE= 4495.5+1387.5[/tex]
[tex]KE= 5883J[/tex]
To know more about kinetic energy visit:
https://brainly.com/question/25959744
#SPJ4
What is the total distance the particle travels from t 0 to t 4?
the whole distance is five. The main point is that you must be aware of if and when the particle reverses course.
In order to determine the velocity, differentiate the displacement and set it to zero.
It is obvious that at t=1, the velocity is zero.
S=3 is the starting location at time t=0. At t=1,s=2 \s.
The total distance traveled is 1.
The additional distance traveled is 62=4 at time t=3 and s=6.
Thus, the whole distance is five.
L=30|s′(t)|dt=30|2t2|dt=1022tdt+312t2dt=5 is the length of the image of s|[0,3] and represents the total distance traveled between t=0 and t=3. .
When calculating the traveled distance of a particle satisfying the law of motion s(t) between t=a and t=b, another method that can be used if you are unfamiliar with the arc length formula is to first determine the critical points in (a,b), such as t1tk, and then multiply those values by the following formula: |s(t1)s(a)|+|s(t2)s(t0)|++|s(b) Since there is just one critical moment in your particular scenario, t=1, L=|s(1)s(0)|+|s(3)s(1)|=1+4.
To learn more about particle please click on below link
https://brainly.com/question/2288334
#SPJ4
The capacitor charge Q exponentially decays to zero when the RELAY is thrown to position N.O.
O True
O False
The statement is false. The capacitor doesn't charge Q exponentially decays to zero when the RELAY is thrown to position N.O.
As a capacitor charges, its voltage also rise.
V = Q/C
where Q = charge, V = voltage and C = capacitance
If the circuit contains a battery, a resistor and a capacitor all connected in series, then the following are true.
The battery voltage is fixed. And the capacitor voltage is rising. This clearly means that the current through the resistor is dropping.
I = (Vbatt - Vcap)/R
Since the current is dropping, then the rate at which charge is deposited on one plate and removed from the other one continuously drops.
So the charging of the capacitor also slows down because of the rising voltage.
But here the rise in the voltage is slowing down because of the rate of charges that are accumulating and leaving continuously is slowing down.
The slower rise in voltage causes a further slowing in the rate of charge movement which further slows down the rise in voltage which causes an even slower rate of charge movement.
A capacitor is referred as an electrical device which stores electrical charge when it is connected across the source of potential difference.
The total charge that the capacitor can be stored when it is placed across a potential V is given by
Q=CV
where C is the capacitance of the capacitor.
To know more questions about Capacitor refer to-
brainly.com/question/27393410#
#SPJ4
What causes high latency?
A low bandwidth will result in a high ping (delay) and, most likely, lag while you're playing. It will also affect how quickly data is delivered and then received.
When latency is high, what does that mean?Because of the temporal lag caused by high latency, gaming might be much less enjoyable. It is essential because low latency allows for more fluid gameplay. Typically, a latency (or ping) of 40–60 milliseconds (ms) or less is considered to be acceptable.
What happens when latency is reduced?Your website resources will load more quickly if server latency is reduced, which will also improve the time it takes for visitors to load all of your pages.
To know more about latency visit:-
https://brainly.com/question/14894222
#SPJ4
This problem contains several examples of this.Consider an object sliding on a frictionless ramp as depicted here. (Figure 1) The object is already moving along the ramp toward position 2 when it is at position 1. The following questions concern the direction of the object's acceleration vector a_vec. In this problem, you should find the direction of the acceleration vector by drawing the velocity vector at two points near to the position you are asked about. Note that since the object moves along the track, its velocity vector at a point will be tangent to the track at that point. The acceleration vector will point in the same direction as the vector difference of the two velocities.
Which direction best approximates the direction of a_vec when the object is at position 2?
a. straight up b. upward to the right c. straight down d. downward to the right
This problem contains several examples of this.Consider an object sliding on a ramp as depicted here.Downward to the right.
What is the sliding ?
Sliding is a type of motion that involves the movement of an object relative to a surface while keeping contact with it. This type of motion is often used in everyday activities such as walking, running, and skiing. Sliding can also refer to the movement of two or more objects in contact with each other, such as a car door sliding open or a sheet of paper sliding across a table. In physics, sliding is considered to be a type of frictional motion, in which the frictional force between the object and the surface it is sliding on causes the object to move.
To learn more about sliding
https://brainly.com/question/17140804
#SPJ4
What area of glass is needed to support a mass of 1000 kg if the glass can withstand a maximum pressure of
20kPa?
Answer:
since, Pressure=Force/Area
then,Area=Force/Pressure
or,Area=20000/1000
:.Area=20 m²
What is the difference between the weight of an object and the mass of an object?
A body's mass is the total amount of its material. Gravitational pull on a body is represented by weight.
What is the difference between mass and weight?The relationship between mass and weight Mass is a measure of inertia, whereas weight is a measure of force.
Both of these names are frequently used in the same sentence. Calculating how much matter a body contains requires knowing its mass.
Weight is a unit of measurement for the force that gravity's acceleration has on a mass.
Weight is a measurement of how the force of gravity works upon a mass, whereas mass is a measure of the amount of matter in a material.
In order to determine how much matter a body contains, we need to use its mass.
To learn more about mass and weight refer to:
brainly.com/question/1966951
#SPJ4
New ecosystems have been created by human land use.
Answer:
Yes
Explanation:
When humans use land, they change it to accommodate their own needs, and thus new locations and new habitats for other organisms are created. These organisms can now live there and create new organisms, and thus create new ecosystems as a result of human use of that particular piece of land.
Running at 2. 0 m/s, Burce, the 45. 0 kg quarterback, collides with Max, the 90. 0 kg tackle, who is traveling at 7. 0 m/s in the other direction. Upon collision, Max continues to travel forward at 1. 0 m/s.
What is the new velocity of Bruce?(list unknown variable and known variables, write an equation, plug in numbers, and get answer with unit. )
Burce, a 45-kg quarterback, collides with Max, a 90-kg tackle, who is moving at 7.0 m/s in the opposite direction, as he runs at 2.0 m/s. This results in Bruce's new speed being 14 m/s.
Max hits the ground moving forward at a speed of 1.0 m/s. A moving object's velocity is a function of time and measures how quickly its position changes in relation to a frame of reference. When an object is moving, its speed and direction are specified by its velocity. A collision in physics is referred to as an elastic collision when the combined kinetic energy of the two bodies stays constant. A collision that is ideal and absolutely elastic
V1 = (720 - (90)(1))/45
V1 = 14m/s
Learn more about speed here
https://brainly.com/question/28224010
#SPJ4
Why momentum is denoted by P?
It's unknown where the term "p" for momentum first appeared. Since m had already been used for "mass," it has been proposed that the p may have been derived from the Latin petere or from "progress".
Why is momentum given the letter p?The letter "I" would cause a misunderstanding between inertia and moment of inertia. The French and Germans selected "p" for momentum because of this.
What does the momentum unit p mean?The formula p = mv can be used to compute momentum, where p stands for momentum, m for mass, and v for velocity. The usage of the letter p to represent momentum has various benefits. First off, it would be unclear to use m for momentum because m stand for mass.
To know more about momentum visit:-
https://brainly.com/question/24030570
#SPJ4
Determine the missing forces A-H
The missing forces in the diagram given are: A = 50 N; B = 200 N; C = 1100 N; D = 20 N; E = 300 N; F = 0 N; G = 50 N and H = 0 N.
What is resultant force?In physics and engineering, a resultant force is a single force and associated torque obtained by combining a system of forces and torques acting on a rigid body by vector addition. The characteristic of a resultant force or force-torque is that it has the same effect on a rigid body as the original force system. The resulting forces on the body are calculated and visualized by computational analysis or (for sufficiently simple systems) by free-body diagrams.
For A and B:
Since net force is zero the applied forces in all four direction will be equal but opposite.
So A will be 50 N and B will be 200 N.
For C:
The net force is 900 N;
C = 900 + 200
C = 1100 N
For D and E:
The net force is 60 N left; this means the net upward or downward force acting on the object is zero.
So E = 300 N
D = 80 - 60
D = 20 N
For F, G and H:
The net force is 30 N right; this means the net upward or downward force acting on the object is zero.
So F and H will be zero.
G = 20 + 30
G = 50 N
To know more about force, visit:
https://brainly.com/question/28875770
#SPJ1
what is the upward acceleratiob of a helicopter with a mass of 5250 kg if a force of 11000 N acts upon it
Answer:
[tex]2.09 m/s^{2}[/tex]
Explanation:
The upward acceleration of an object can be calculated using the formula:
[tex]a = F / m[/tex]
where:
a is the acceleration of the object (in meters per second squared)
F is the force acting on the object (in newtons)
m is the mass of the object (in kilograms)
So in this case, we have:
[tex]a = 11000 N / 5250 kg = 2.09 m/s^2[/tex]
This is the upward acceleration of the helicopter when a force of 11000 N is acting on it.
Seismic-wave velocity can change (increase or decrease) as the waves pass through different rock types.
Yes, seismic-wave velocity can change as the waves pass through different rock types.
Rocks with high porosity and permeability tend to have lower seismic-wave velocities because the pores contain fluid that can dampen the energy of the seismic waves, while rocks with high compaction and densities tend to have higher seismic-wave velocities. Additionally, changes in temperature and pressure can also affect seismic-wave velocity.
What are seismic sounders?Seismic sounders are seismic instruments that use a wide range of sound frequencies to measure the Earth's subsurface structure, composition, and its response to seismic waves generated from a source.
They are used in the exploration of oil, gas and mineral resources and for investigating earthquake and volcanic processes.
Learn more about seismic sounders:
https://brainly.com/question/15073818
#SPJ4
Classify these (x,y) coordinate pairs as a source point or a field point. Drag the appropriate items to their respective bins. the numbers in the picture are: (6,0) (0,8) (0,0) (0,-8)
The classification of the points in the picture of electric charges on a coordinate plane are;
Source points; (0, 8)c field is thr, (0, 0), (0, -8)Field poinrt; (6, 0)What is an electric field?An elecric field is the region or field which surrounds an electric charge, The value of an electric field is the force per unit charge within the field.
The specified points on the picture of the charges on the coordinate plane are;
(6, 0), (0, 8), (0, 0), (0, -8)
The location of the charges in the picture are;
Coordinates of the location of the charge, q₁ = (0, 8)
The coordinates of the location of the charge, q₂ = (0, 0)
Coordinates of the location of the charge, q₃ = (0, -8)
Coordinates of the location of the point, P = (6, 0)
A source point is the location of a source of electric charge, such as the charges, q₁, q₂ and q₃
The source points are locarted along tnhe y-axis, therefore, the source point are;
(0, 8), (0, 0), and (0, -8)
A field in physics is a region associated with a physical quantity, such as an electric or magnetic field, where the effect of the electric or magnetic field is experienced or felt
The field point is a point located away from the source point, The field point is a point where the effect of the field from the source is felt.
The field point is the point P(6, 0), that is located away from the charges, q₁, q₂, and q₃
Learn more about charges and electric field? https://brainly.com/question/14837739
#SPJ1
hi, can someone explain each paragraph or rephrase each paragraphs for my reporting sana , thanks !
X-rays Ultraviolet rays are followed immediately by X-rays. Although they have a shorter wavelength than the UV, they are more energetic.
An X-ray tube is used to create X-rays. When quickly traveling electrons strike a metal object, they are released. Wilhelm Conrad Roentgen made the X-ray discovery in 1895.
The flesh can be penetrated by long wavelength X-rays, but not the bones. They assist doctors in viewing the inside of the body through X-ray imagery. They are helpful in identifying malignancies and bone fractures.
Even metals can be penetrated by short wavelength X-rays. They are applied in industry to check for flaws in welded joints.
All X-rays pose a risk because they have the potential to harm the body's healthy, functioning cells.
This is why exposure to X-rays on a regular basis should be avoided. Body tissues can be harmed by excessive X-ray exposure, which can also lead to cancer.
How are X-Rays created?To create images of the body, its organs, and other internal structures for diagnostic purposes, X-rays use external radiation. A "negative" type image is created when X-rays penetrate human structures and land on specially treated plates (similar to camera film) or digital media (the more solid a structure is, the whiter it appears on the film).
Different bodily components permit various amounts of the X-ray beams to pass through when the body is exposed to X-rays. The majority of the X-ray energy can pass through soft tissues in the body, including blood, skin, fat, and muscle, making them look dark gray on film or digital media. Few X-rays can penetrate dense soft tissue like a bone or a tumor.
To learn more about X-rays from given link
https://brainly.com/question/24505239
#SPJ1
What is the velocity of the particle at time t 0?
The velocity of the particle at t=0 is zero because the particle is in rest position and did not moving at any of the instance or travelling at an uniform speed through out the whole journey or yet did not start from the source point.
Velocity is the rate of change of velocity. At any point on a trajectory, the magnitude of the velocity is given by the rate of change of velocity in both magnitude and direction. Velocity of the body that we can consider is the increasing value of the velocity of any object at a constant rate and that of we can calculate. Hence by the primary information that we have we can formerly consider that the velocity which is acting on the particle at t=0 is zero because the particle is in rest position and did not moving at any of the instance or travelling at an uniform speed through out the whole journey or yet did not start from the source point.
Learn more about Velocity:
brainly.com/question/18084516
#SPJ4
Consider you are X units in distance from a light source. You receive Y unit of light per unit time. You have to be _____ X units in distance from the light source in order to receive 4Y unit of light per unit time.
when it takes 4x units of distance from the light for you to receive 4Y units of light in a given amount of time.
What is a distance?Distance is a measurement of the separation between two things or locations, either quantitatively or qualitatively. A physical distance or perhaps an estimate relying on other physics- or usage-related characteristics can both be referred to as distance. The phrase is also employed metaphorically to denote a measurement of the degree of distance between two common pieces since spatial intelligence is a rich source of implicatures in human understanding. The majority of these concepts of distance, both literal and figurative, are codified using the idea of a metric space.
To learn more about distance follow the given link: brainly.com/question/12356021
#SPJ4
Which graph shows the change in velocity of an object in free fall?
Answer: B
Explanation:
Free fall -> constant acceleration of g = 9.81ms-1
Constant acceleration -> velocity increases at a constant rate (increases proportionally with time)
Math behind it:
* Velocity is the integration of acceleration, likewise acceleration is the differentiation of velocity. Integrating a constant value gives linearly increasing function in terms of x. (integrating with respect to x)
Hence, graph B shows the trend that velocity increases at a constant rate.
Graph A - Velocity decreases linearly
Graph C - Also decreases nonlinearly
Graph D - Not possible scenario. Velocity approaches infinity.
Which of the following best defines the term “climate”?
A: the weather patterns that are occurring right now
B: the specific weather patterns for a local region or city
C: the temperature readings for the past 30 years or more
D:he average conditions of the atmosphere for a large region for the past 30 years or more
The statement that best defines climate is as follows: the average conditions of the atmosphere for a large region for the past 30 years or more (option D).
What is climate?Climate is the long-term manifestations of weather and other atmospheric conditions in a given area or country.
Climate is now usually represented by the statistical summary of its weather conditions during a period long enough to ensure that representative values are obtained (generally 30 years).
A description of a climate includes information on, e.g. the average temperature in different seasons, rainfall, and sunshine.
Therefore, option D correctly describes climate.
Learn more about climate at: https://brainly.com/question/10440860
#SPJ1
Calculate the wavelength, in meters, of electromagnetic radiation needed to remove an electron from the valence shell of an atom of the element.
The wavelength of the electromagnetic radiation needed to remove an electron from the valence shell of an atom of the element is 2.7522m.
The electromagnetic (EM) field's waves, which travel across space carrying momentum and electromagnetic radiant energy, make up electromagnetic radiation (EMR). It consists of X-rays, gamma rays, microwaves, infrared, visible light, ultraviolet, and radio waves. These waves are all components of the electromagnetic spectrum.
We are given that,
Speed of light = c = 299 792 458 m
The frequency of electron = f = 1.09 × 10⁸ s⁻¹
The following equation can be used to determine the wavelength of a radio wave
Wavelength = λ = c/f
λ = c/f
λ = 299 792 458 m/s/ 1.09 × 10⁸ s⁻¹
λ = 2.7522m
Therefore the wavelength of the electromagnetic radiation would be 2.7522m.
To know more about wavelength
https://brainly.com/question/1263539
#SPJ4
What theorem is presented based on the structure of the baseball field?
Pythagorean Theorem to determine the gap between second base and home plate.
Explain the pythagorean theorem.The Pythagorean theorem and the coordinates of the two locations are used in the distance formula to determine the distance between them. The formula below can be used to determine the length of AB if A and B make up the hypotenuse of a right triangle: Leg2 plus Leg2 equals Hypotenuse 2.
measured from the middle of the backstop to the apex of home plate. Place second base in centre by drawing a line from the backstop's centre point over the pitcher's mound, through the apex. The distance that needs to be measured is between the centre of second base and the top of home plate.
The square root of (a,c)2 + (b,d)2 is used to calculate the distance between the points (a,b) and (c,d). The distance between points (a, b, c) and (d, e, f) in three dimensions is equal to the square root of (a, d), (b, e), and (c, f).
To learn more about Pythagoras theorem visit:
brainly.com/question/343682
#SPJ4
What are two way in which early psychological research was biased? What’s an example of bias in psychology?
Psychological research gives us information about the research that psychologists conduct for systematic study and for analysis of the experiences and behaviors of individuals or groups.
Give the two methods on which early psychological research was based.
There are two ways in which psychological research is based and that is the research being androcentric and ethnocentric. Examples of this include the theory of personality and the attachment of the theory.
There are many more biases is well in psychological research which are Citation bias, Language bias, and Outcome reporting bias. The citation bias includes whether the research receives citations or not. Language bias includes when research is published in one language over another. The outcome reporting bias includes that when only some outcomes are reported from a study.
So we can conclude that there are two ways in which early psychological research was biased and that are; when research is androcentric and ethnocentric.
Learn more about Psychology here: https://brainly.com/question/12011520
#SPJ1
two objects gravitationally attract with a force of 36 N if the distance between the two objects centers is decreased by a factor of threee then the new force of attraction is
The new force of attraction is 324N if the distance between the centres of the two objects is reduced by a factor of 3e.
The equation for the force of gravitational attraction between two objects is: F = G*(m1*m2)/r^2 Where F is the force of attraction, G is the gravitational constant (6.67 x 10^-11 Nm^2/kg^2), m1 and m2 are the masses of the two objects, and r is the distance between their centers. If the distance between the two objects' centers is decreased by a factor of three, the new force of attraction will be: F' = G*(m1*m2)/(r/3)^2The ratio of the new force of attraction to the original force of attraction is:
F'/F = (r/3)^2 If we substitute in the original force of attraction, we have:
F'/36 = (r/3)^2 = F' = 36 * (r/3)^2
As we decrease the distance by a factor of 3, the new force of attraction will increase by a factor of 9.
F' = 36*9 = 324 N
Therefore, the new force of attraction is 324 N.
Learn more about gravitational attraction here:
https://brainly.com/question/19822389
#SPJ4
The length of nylon rope from which a mountain climber is suspended has a force constant of 1.2×104 N/m.
a. What is the frequency, in Hz, at which he bounces, given his mass and the mass of his equipment is 98 kg?
b. How much would this rope stretch, in centimeters, to break the climber's fall if he free-falls 1.8 m before the rope runs out of slack?
c. What is the frequency, in Hz, at which he bounces, given his mass and the mass of his equipment is 98 kg if the rope is twice as long?
d. How much would this rope stretch, in centimeters, to break the climber's fall if he free-falls 1.8 m before the rope runs out of slack if he rope was twice the length?
The length of nylon rope from which a mountain climber is suspended has a force constant of 1.15 ✕ 104 N/m.
What is the force constant measured in?Spring constant is the common name for the force constant. Hooke's law states that F=-kx. k=N/m is used to replace units in the equation where F is force, x is displacement, and k is force constant (spring constant) to determine the SI unit of force constant (spring constant).
What is a graph's force constant?The slope (gradient) of the graph equals the force constant. The proportionality constant, or k, is also known as the force constant in physics. A spring that is more rigid will have a higher value for k. The graph is no longer a straight line beyond point A since the gradient has changed and the formula F = Kx is no longer valid.
Calculation:Maximum speed is at equilibrium where:
F = kx ⇒x =F/k
Now, F x=1/2mv²+1/2kx²
Solving we get,
V=F/√mk=Vmax
To learn more about force constant visit:
brainly.com/question/15170479
#SPJ4