The average rate of disappearance of CH₃NC between 0 and 600 seconds is 0.77 torr/s (Option D).
To calculate the average rate of disappearance of CH₃NC between 0 and 600 seconds, we need to use the following formula:
Average rate = (change in pressure of CH₃NC)/(time interval)
From the given data, we can see that the pressure of CH₃NC decreases as time increases, which indicates that the isomerization reaction is taking place. Therefore, we need to calculate the change in pressure of CH₃NC between 0 and 600 seconds:
Change in pressure = (pressure at 0 seconds) - (pressure at 600 seconds)
= 620 - 158
= 462 torr
Now, we can calculate the average rate of disappearance of CH₃NC:
Average rate = (change in pressure)/(time interval)
= 462/600
= 0.77 torr/s
Therefore, the average rate of disappearance of CH₃NC between 0 and 600 second is 0.77 torr/s.
Learn more about average rate of disappearance: https://brainly.com/question/14919490
#SPJ11
What is the pH of a 0.100 M NH3 solution that has Kb = 1.8 x 10^-52. The equation for the dissociation of NH3 is NH3(aq) H2o() = NHAt(aq) 0H-(aq). A) 11.13 B) 12.13 C) 1.87 D) 2.87
The pH of a 0.100 M NH₃ solution with Kb = 1.8 x 10⁻⁵ is 11.13. (A)
1. Write the Kb expression: Kb = [NH₄⁺][OH⁻] / [NH₃]
2. Set up an ICE table: Initial concentrations are [NH₃] = 0.100 M, [NH₄⁺] = 0, [OH⁻] = 0. Changes are -x for NH₃ and +x for NH₄⁺ and OH⁻.
3. Substitute values into the Kb expression: (1.8 x 10⁻⁵) = (x)(x) / (0.100 - x)
4. Since x is small compared to 0.100, we can approximate by removing x in the denominator.
5. Solve for x: x² = (1.8 x 10⁻⁵)(0.100) ⟹ x = 1.34 x 10⁻³ M
6. Calculate the pOH: pOH = -log(1.34 x 10⁻³) ≈ 2.87
7. Find the pH: pH = 14 - pOH ≈ 11.13(A)
To know more about ICE table click on below link:
https://brainly.com/question/30642088#
#SPJ11
If 20g of caco2 and 25g of Hcl are mixed ,what mass of Co2 is produced ?
Approximately 8.79 grams of CO₂ are produced when 20 grams of CaCO₃ and 25 grams of HCl are mixed.
The balanced chemical equation for the reaction between calcium carbonate (CaCO₃) and hydrochloric acid (HCl) is:
CaCO₃ + 2HCl → CaCl₂ + CO₂ + H₂O
From the equation, we can see that 1 mole of CaCO₃ reacts with 2 moles of HCl to produce 1 mole of CO₂. The molar mass of CaCO₃ is 100.09 g/mol, and the molar mass of HCl is 36.46 g/mol.
To find the mass of CO₂ produced, we need to determine which reactant is limiting. This can be done by calculating the number of moles of each reactant and comparing them to the stoichiometric ratio in the balanced equation.
Number of moles of CaCO₃ = 20 g / 100.09 g/mol = 0.1998 mol
Number of moles of HCl = 25 g / 36.46 g/mol = 0.685 mol
According to the balanced equation, 1 mole of CaCO₃ reacts with 2 moles of HCl. Therefore, the limiting reactant is CaCO₃, since only 0.1998 moles of CaCO₃ are available to react with HCl.
From the balanced equation, we know that 1 mole of CaCO₃ produces 1 mole of CO₂. Therefore, the number of moles of CO₂ produced is also 0.1998 mol.
The molar mass of CO₂ is 44.01 g/mol. Therefore, the mass of CO₂ produced is:
Mass of CO= 0.1998 mol x 44.01 g/mol = 8.79 g
Therefore, approximately 8.79 grams of CO₂ are produced when 20 grams of CaCO₃ and 25 grams of HCl are mixed.
Learn more about molar mass,
https://brainly.com/question/22997914
#SPJ4
Consider the reaction between calcium chloride and silver nitrate to produce silver chloride and calcium nitrate.
Right and balance the equation for this reaction. Include states of matter for all compounds.
What species is the precipitate?
Write and complete the ionic equation
Identify the spectator ions
And write the net ionic equation
The balanced equation for the reaction between calcium chloride ([tex]CaCl_{2}[/tex]) and silver nitrate ([tex]AgNO_{3}[/tex]) to produce silver chloride (AgCl) and calcium nitrate ([tex]Ca(NO_{3})_{2}[/tex]) is:
CaCl2 (aq) + 2AgNO3 (aq) → 2AgCl (s) + Ca(NO3)2 (aq)
The precipitate in this reaction is silver chloride (AgCl), which is a white solid that is insoluble in water.
The ionic equation for this reaction can be written by first breaking down all the soluble compounds into their constituent ions:
Ca2+ (aq) + 2Cl- (aq) + 2Ag+ (aq) + 2NO3- (aq) → 2AgCl (s) + Ca2+ (aq) + 2NO3- (aq)
In this equation, Ca2+ and NO3- are spectator ions since they appear on both sides of the equation and do not undergo any chemical change.
The net ionic equation for the reaction can be obtained by removing the spectator ions from the ionic equation:
2Ag+ (aq) + 2Cl- (aq) → 2AgCl (s)
The net ionic equation shows only the species that participate in the actual chemical reaction, which in this case is the formation of silver chloride.
Learn more about iconic equations, here:
https://brainly.com/question/30379359
#SPJ1
the beta decay product of mo-98 is (hint mo is atomic number 42) group of answer choices nb-97 tc 96 nb - 98 tc - 98
The beta decay product of Mo-98 (Molybdenum-98, atomic number 42) is Tc-98 (Technetium-98).
Here's a step-by-step explanation:
1. Mo-98 undergoes beta decay, where a neutron is converted into a proton and an electron (beta particle) is emitted.
2. As a result, the atomic number increases by 1 (from 42 to 43) and the element changes from Mo (Molybdenum) to Tc (Technetium).
3. The mass number remains the same (98), so the final product is Tc-98 (Technetium-98).
So, the correct choice among the given options is Tc-98.
To learn more about beta decay, visit:
https://brainly.com/question/31394531
#SPJ11
be sure to answer all parts. rank the species in order of increasing nucleophilicity in acetone. a. ch3sh b. ch3oh c. ch3nh2
The order of increasing nucleophilicity in acetone is [tex]CH_3OH (b) < CH_3NH_2 (c) < CH_3SH (a).[/tex]
In acetone, the nucleophilicity of a species depends on its ability to donate a pair of electrons and react with an electrophile. The three species to consider are [tex]CH_3SH (a), CH_3OH (b), and CH_3NH_2 (c)[/tex]. To rank them in order of increasing nucleophilicity, we need to analyze their electron-donating abilities, which are influenced by factors such as the size of the atom, electronegativity, and the stability of the conjugate base.
a. [tex]CH_3SH[/tex]: The sulfur atom in [tex]CH_3SH[/tex] is larger and less electronegative than oxygen and nitrogen. This makes the electron cloud more dispersed, allowing it to donate electrons more easily.
b. [tex]CH_3OH[/tex]: The oxygen atom in [tex]CH_3OH[/tex] is more electronegative than sulfur and nitrogen. However, it is a relatively small atom, which leads to a higher electron density around the oxygen, resulting in reduced nucleophilicity compared to [tex]CH_3SH[/tex].
c. [tex]CH_3NH_2[/tex]: The nitrogen atom in [tex]CH_3NH_2[/tex] is less electronegative than oxygen but more electronegative than sulfur. It is also smaller than sulfur, resulting in a more concentrated electron cloud. However, its lower electronegativity compared to oxygen makes it a better nucleophile than [tex]CH_3OH.[/tex]
In conclusion, the order of increasing nucleophilicity in acetone is as follows: [tex]CH_3OH (b) < CH_3NH_2 (c) < CH_3SH (a).[/tex] This means that [tex]CH_3SH[/tex] is the strongest nucleophile among the three species, while [tex]CH_3OH[/tex] is the weakest.
For more such questions on Nucleophilicity.
https://brainly.com/question/29563504#
#SPJ11
Consider the following reaction, 2A(g) = B(g) + 3C(8) Initial concentration of A was 0.115 M and the equilibrium concentration of B(g) was 0.035 M. Determine the equilibrium constant for this reaction. 50 0.020 0.300 3.3 0.010
This reaction's equilibrium constant is 0.300.
To solve for the equilibrium constant (Kc), we need to use the concentrations of the reactants and products at equilibrium. We are given the equilibrium concentration of B(g) which is 0.035 M. However, we need to find the equilibrium concentrations of A(g) and C(g).
From the balanced chemical equation, we know that for every 2 moles of A that react, 1 mole of B and 3 moles of C are produced. Let x be the equilibrium concentration of A. Then, using stoichiometry, the equilibrium concentrations of B and C are:
[B] = 0.035 M
[C] = 3x
Since the reaction stoichiometry is 2:1:3 (A:B:C), the equilibrium concentrations in terms of x are:
[A] = 0.115 - 2x
[B] = 0.035
[C] = 3x
Now we can write the expression for the equilibrium constant (Kc):
Kc = ([B]^1[C]^3) / [A]^2
Plugging in the equilibrium concentrations, we get:
Kc = (0.035)(3x)^3 / (0.115 - 2x)^2
Simplifying this expression, we get:
Kc = (0.0315x^3) / (0.013225 - 0.460x + 4x^2)
At equilibrium, the reaction quotient Qc is equal to Kc. Therefore, we can set up an equation to solve for x:
Kc = (0.0315x^3) / (0.013225 - 0.460x + 4x^2)
Kc = 3.3 (given)
3.3 = (0.0315x^3) / (0.013225 - 0.460x + 4x^2)
Solving this equation for x gives us x = 0.020 M. Therefore, the equilibrium concentrations are:
[A] = 0.115 - 2x = 0.075 M
[B] = 0.035 M
[C] = 3x = 0.060 M
Plugging in these values into the expression for Kc gives us:
Kc = (0.035)(0.060)^3 / (0.075)^2
Kc = 0.300
Therefore, the equilibrium constant for this reaction is 0.300.
For more such questions on equilibrium constant , click on:
https://brainly.com/question/3159758
#SPJ11
write a balanced net ionic equation for the reaction of nibr2(aq) with (nh4)2s(aq).
The balanced net ionic equation for the reaction of NiBr2(aq) with (NH4)2S(aq) is:
Ni2+(aq) + S2-(aq) → NiS(s)
Note that the spectator ions NH4+ and Br- do not participate in the reaction and are not included in the net ionic equation.
Spectator ions are ions that do not participate in a chemical reaction, meaning they do not undergo any chemical change during the reaction. They are present in both the reactants and the products and do not affect the outcome of the reaction.
Spectator ions can be identified by looking at the balanced chemical equation of the reaction and canceling out ions that appear on both sides of the equation.
Visit here to learn more about spectator ions brainly.com/question/28913274
#SPJ11
The balanced net ionic equation for the reaction of NiBr2(aq) with (NH4)2S(aq) is:
Ni2+(aq) + S2-(aq) → NiS(s)
Note that the spectator ions NH4+ and Br- do not participate in the reaction and are not included in the net ionic equation.
Spectator ions are ions that do not participate in a chemical reaction, meaning they do not undergo any chemical change during the reaction. They are present in both the reactants and the products and do not affect the outcome of the reaction.
Spectator ions can be identified by looking at the balanced chemical equation of the reaction and canceling out ions that appear on both sides of the equation.
Visit here to learn more about spectator ions brainly.com/question/28913274
#SPJ11
In the laboratory, you are given the task of separating Ca2+ and Zn2+ ions in aqueous solution. Can the reagent Na2S be used for this process? If so, write the formula of the precipitate.
Answer:
ZnS
Explanation:
Zinc sulfide is not soluble in water while Calcium sulfide is, therefore the former will precipitate but the latter won't
Write the systemic name of Hg(NO3)2 H20
_________
Answer:
[tex]The \: systemic \: name \: of \: the \: \\ compound \: is[/tex]
Mercuric nitrate
hope it helps <3
Convert your experiment solubility of KHT (in mol L^-1) to g KHT per 100 mL. Compare this solubility to the literature value, obtainable from a chemistry handbook
The literature value for KHT solubility is 0.042 g/100 mL. The value obtained from the experiment is slightly higher than the literature value.
What is solubility?Solubility is the ability of a substance to dissolve in a solvent, usually a liquid, to form a homogeneous solution. It is expressed as the maximum amount of solute that can dissolve in a given quantity of solvent or solution. It can also be expressed in terms of concentration, as the amount of solute that dissolves in a given volume of solvent or solution at a given temperature. A substance is considered soluble if it dissolves in a solvent at a rate sufficient to reach equilibrium.
Given: Solubility of KHT in mol L⁻¹ = 0.00025 mol/L
Conversion: 0.00025 mol/L x 204.22 g/mol = 0.0505 g KHT/100 mL
The literature value for KHT solubility is 0.042 g/100 mL. The value obtained from the experiment is slightly higher than the literature value.
To learn more about solubility
https://brainly.com/question/23946616
#SPJ1
upload a single file of all the skeletal structures for the molecules in the table. make sure that each structure is clearly labeled with the name of the molecule.
To upload a single file of all the skeletal structures for the molecules in the table, you can use a program like ChemDraw or MarvinSketch to draw the structures and save them as individual files. Then, you can combine them into a single PDF or image file using a tool like Adobe Acrobat or Microsoft Paint. Just make sure that each structure is clearly labeled with the name of the molecule to avoid any confusion.
Let us discuss this in detail.
To upload a single file of all the skeletal structures for the molecules in the table, follow these steps:
1. Gather the skeletal structures: Collect images or create diagrams of the skeletal structures for each molecule listed in the table. Make sure they are accurate and clear.
2. Label the structures: For each skeletal structure, add a label that clearly indicates the name of the molecule. You can do this using image editing software or by creating the labels directly on the diagrams if you are drawing them.
3. Combine the structures into a single file: Arrange all the labeled skeletal structures in a document or image file, ensuring that each structure is easily distinguishable and well-organized. You can use software like Microsoft Word, PowerPoint, or an image editor like GIMP or Photoshop for this purpose.
4. Save the file: Save your document or image file with an appropriate name that reflects its contents, such as "Skeletal_Structures_of_Molecules."
5. Upload the file: Finally, upload the single file containing all the labeled skeletal structures for the molecules in the table to the designated platform or as per the given instructions.
By following these steps, you will have successfully created and uploaded a single file of all the skeletal structures for the molecules in the table.
Learn more about skeletal structures at https://brainly.com/question/29165067
#SPJ11
draw the structure of the major organic product you would expect from the reaction of 1-bromopropane with koc(ch3)3.
The major organic product formed from the reaction of 1-bromopropane with KOCH(CH3)3 is 1-propoxypropane.
The reaction involves a substitution reaction where the bromine atom of 1-bromopropane is replaced by the alkoxide group (OC(CH3)3) from potassium tert-butoxide (KOCH(CH3)3). The tert-butoxide ion is a strong nucleophile, attacking the electrophilic carbon of 1-bromopropane to form a new carbon-oxygen bond.
This results in the formation of 1-propoxypropane as the major product, where the tert-butoxide group replaces the bromine atom. The reaction occurs via an S_N2 mechanism, where the nucleophile attacks the substrate from the backside, resulting in inversion of configuration at the reaction center.
For more questions like Reaction click the link below:
https://brainly.com/question/28984750
#SPJ11
Complete and balance the following redox reaction in acidic solution. Be sure to include the proper phases for all species within the reaction. Te0.2 (aq) + N20 g) - Te(s) + NO, (aq) Complete and balance the following redox reaction in basic solution. Be sure to include the proper phases for all species within the reaction. Cr20-2 (aq) + Hg(0) -- Hg2+(aq) + Cr* (aq) Complete and balance the following redox reaction in basic solution. Be sure to include the proper phases for all species within the reaction. Re04 (aq) + Pb2+(aq) - Re(s) + PbO2 (s)
To complete and balance the following redox reactions in acidic and basic solutions, here are the balanced equations with proper phases for each species involved:
Redox reaction in acidic solution:
[tex]TeO_{2}(aq) + N_{2}O(g) = Te(s) + NO(g)[/tex]
Redox reaction in basic solution:
[tex]Cr2O_{72-}(aq) + Hg(0) = Hg_{2+} (aq) + Cr_{3+} (aq)[/tex]
Redox reaction in basic solution:
[tex]ReO_{4_}(aq) + Pb_{2+} (aq) = Re(s) + PbO_{2} (s)[/tex]
Redox reactions, also known as oxidation-reduction reactions, involve the transfer of electrons between chemical species. In a redox reaction, one species undergoes oxidation, which involves the loss of electrons, while another species undergoes reduction, which involves the gain of electrons.
The species that undergoes oxidation is called the reducing agent or reductant because it donates electrons, while the species that undergoes reduction is called the oxidizing agent or oxidant because it accepts electrons. Redox reactions involve a simultaneous occurrence of both oxidation and reduction.
For more details regarding redox reactions, visit:
https://brainly.com/question/28300253
#SPJ12
on a gas chromatogram, the time from sample injection to the time of maximum peak intensity is referred to as the ____________ for that peak.
On a gas chromatogram, the time from sample injection to the time of maximum peak intensity is referred to as the "retention time" for that peak.
Gas chromatography is used to separate compounds of a mixture by injecting a gaseous/liquid sample into a mobile phase known as the carrier gas, which is usually and inert or unreactive gas and passing the gas through a stationary phase.
If we have a sample with many compounds, each compound in the sample will spend different time on the column based on its chemical composition which means that, each will have a different retention time.
For more questions on gas chromatography: https://brainly.com/question/30500847
#SPJ11
what volume of a 25M solution can be prepared with 28.5g of K2S molar mass 110.26g
Answer:
10.34 mL
Explanation:
The molar mass of K2S is 110.26g/mol.
Number of moles of K2S = mass / molar mass
Number of moles of K2S = 28.5g / 110.26g/mol = 0.2586 mol
Now, we can use the definition of molarity to calculate the volume of the solution that can be prepared.
Molarity = number of moles / volume of solution (in liters)
Rearranging the equation, we get:
Volume of solution = number of moles / molarity
Volume of solution = 0.2586 mol / 25 mol/L = 0.010344 L = 10.34 mL
Therefore, 10.34 mL of a 25M solution of K2S can be prepared from 28.5g of K2S.
Why is it necessary to test for the ammonium ion in a separate sample of solution? Why can you not simply test for it in Group C, when you are evaporating the solution?
Testing for ammonium ion in a separate sample is necessary to avoid interference from other ions present in Group C during evaporation.
How testing for ammonium ion in a separate sample is necessary ?The reason why it is necessary to test for the ammonium ion in a separate sample of solution is that it can interfere with the analysis of other cations in Group C.
During the analysis of Group C cations, the solution is usually evaporated to dryness to remove any excess ammonium chloride, which is added to the solution to ensure the complete precipitation of Group C cations. However, if ammonium ion is present in the solution, it can form volatile ammonia gas upon evaporation and interfere with the analysis of other cations by masking their precipitates or changing their color.
By testing for the ammonium ion in a separate sample of solution, it can be determined whether or not it is present before the evaporation step. If it is present, it can be removed or masked before proceeding with the analysis of Group C cations.
Therefore, it is important to test for the ammonium ion separately to ensure accurate and reliable results in the analysis of Group C cations.
Learn more about ammonium ion
brainly.com/question/29781007
#SPJ11
Given that 4NH3(g)+ 5O2(g) --> 4NO(G) +6H2O(g). If 4.5 miles of NH3 react with sufficent oxygen, how many moles of H2O should form?
A) 4.0
B) 4.5
C) 6.0
D) 6.8
6.8 moles of H₂O should form when 4.5 moles of ammonia react with sufficient oxygen.
To determine how many moles of H₂O should form in the reaction 4NH₃(g) + 5O₂(g) --> 4NO(g) + 6H₂O(g) when 4.5 moles of NH₃ react with sufficient oxygen, follow these steps:
1. Identify the mole ratio of NH₃ to H₂O in the balanced chemical equation. The mole ratio is 4:6 or 2:3.
2. Apply the mole ratio to the given moles of NH₃. In this case, you have 4.5 moles of NH₃. To find the moles of H₂O formed, multiply the moles of NH₃ by the mole ratio of H₂O to NH₃ (3/2):
4.5 moles NH₃× (3 moles H₂O / 2 moles NH₃) = 6.75 moles H2O
The correct answer is D) 6.8 moles of H₂O should form when 4.5 moles of ammonia react with sufficient oxygen.
To learn more about moles https://brainly.com/question/15356425
#SPJ11
For the balanced equation shown below, if the reaction of 3.561 grams of H2 produces 32.12 grams of iron metal in the lab, what is the percent yield?
the values we have, we get:percent yield = (32.12 g Fe/31.45 g Fe) × 100% = 102.1%
How to solve the problem?
The first step in determining the percent yield is to calculate the theoretical yield, which is the maximum amount of product that could be produced based on the amount of reactant used in the reaction. To calculate the theoretical yield, we need to use the balanced chemical equation and the molar mass of the reactant and product.
The balanced chemical equation for the reaction is:
Fe₂O₃ + 3H₂→ 2Fe + 3H₂O
From the equation, we can see that 3 moles of hydrogen gas react with 1 mole of iron oxide to produce 2 moles of iron and 3 moles of water. The molar mass of H₂ is 2.016 g/mol, and the molar mass of Fe is 55.845 g/mol.
Using this information, we can calculate the theoretical yield of iron as follows:
3.561 g H₂ × (1 mol H₂/2.016 g) × (2 mol Fe/3 mol H2) × (55.845 g Fe/mol Fe) = 31.45 g Fe
This means that if the reaction went to completion, we would expect to obtain 31.45 grams of iron.
The actual yield obtained in the lab was 32.12 grams of iron. The percent yield can be calculated using the following formula:
percent yield = (actual yield/theoretical yield) × 100%
Substituting the values we have, we get:
percent yield = (32.12 g Fe/31.45 g Fe) × 100% = 102.1%
The percent yield is greater than 100%, which suggests that there may have been some errors or losses during the experiment. This could be due to a number of factors, such as incomplete reaction, loss of product during handling, or measurement errors. It is important to identify and address these sources of error in order to improve the accuracy of the experiment and obtain more reliable results in future trials.
To know more about yield visit :-
https://brainly.com/question/28033398
#SPJ1
what critical risk and success factors must starbucks manage?
As a business, Starbucks must manage several critical risks to ensure its success. One critical risk is the potential for increased competition from other coffee shops and cafes, which could impact its market share and profitability. Additionally, Starbucks must manage the supply chain and operational risks, such as disruptions in the coffee bean supply or issues with its payment systems.
To maintain its success, Starbucks must also manage several key success factors. One important factor is its ability to maintain and grow its customer base, through marketing campaigns and delivering a high-quality customer experience. Additionally, Starbucks must continually innovate and introduce new products and services to stay relevant and meet evolving customer needs. Effective management of these critical risks and success factors is essential for Starbucks to maintain its position as a leader in the coffee industry.
Learn more about Starbucks at brainly.com/question/11540013
#SPJ11
how many mmol of naoh will react completely with 50. ml of 1.9 m h2c2o4 ?
Thus, 0.19 mol or 190 mmol of NaOH will react completely with 50 mL of 1.9 M H2C2O4.
To determine how many mmol of NaOH will react completely with 50 mL of 1.9 M H2C2O4, we first need to find the mmol of H2C2O4:
moles of H2C2O4 = (1.9 mol/L) * (50 mL * (1 L / 1000 mL)) = 0.095 mol H2C2O4
Since the balanced equation for the reaction between NaOH and H2C2O4 is:
H2C2O4 + 2 NaOH → Na2C2O4 + 2 H2O
From the balanced equation, 2 moles of NaOH react with 1 mole of H2C2O4. Therefore, we can find the mmol of NaOH:
mmol of NaOH = 0.095 mol H2C2O4 * (2 mol NaOH / 1 mol H2C2O4) = 0.19 mol NaOH
Thus, 0.19 mol or 190 mmol of NaOH will react completely with 50 mL of 1.9 M H2C2O4.
Know more about Balanced Chemical Equation here:
https://brainly.com/question/28383671
#SPJ11
In a saturated solution of cadmium carbonate at 25 °C both [Cd^2+]and [CO2^−3]=1.0×10^−6 M.[Write an equilibrium expression for this compound.Ksp=Calculate the value of Ksp for this compound.Ksp=
1. The equilibrium expression for the compound is:
[Cd²⁺] [CO₃²⁻] / [CdCO₃]
2. The solubility of product, Ksp for the compound is 1.0×10⁻¹²
1. How do i write the equilibrium expression?Equilibrium constant, Keq for a given chemical reaction is written as shown below:
nReactant ⇌ mProduct
Equilibrium constant (Keq) = [Product]ᵐ / [Reactant]ⁿ
Now, we can shall determine the equilibrium expression, Keq for the reaction. Details below:
CdCO₃(aq) ⇌ Cd²⁺(aq) + CO₃²⁻(aq)
Equilibrium constant (Keq) = [Product]ᵐ / [Reactant]ⁿ
Equilibrium constant expression = [Cd²⁺] [CO₃²⁻]/ [CdCO₃]
2. How do i determine the solubility of product, Ksp?The solubility of product, Ksp for the compound ca be obtained as follow:
Concentration of cadmiun ion, [Cd²⁺] = 1.0×10⁻⁶ MConcentration of carbonate ion, [CO₃²⁻] = 1.0×10⁻⁶ MSolubility of product (Ksp) =?Ksp = [Cd²⁺] × [CO₃²⁻]
Ksp = 1.0×10⁻⁶ × 1.0×10⁻⁶
Ksp = 1.0×10⁻¹²
Learn more about equilibrium constant:
https://brainly.com/question/16589765
#SPJ1
Determine the molecular geometry around each carbon atom in maltose. a) linear b) trigonal pyramidal c) bent d) tetrahedral e) trigonal planar
The first carbon in each glucose molecule has a linear molecular geometry; the second carbon in each glucose molecule has trigonal pyramidal molecular geometry; the third carbon has a tetrahedral molecular geometry; the fourth carbon has trigonal planar molecular geometry; and, the fifth carbon has tetrahedral molecular geometry.
The molecular geometry of maltose is complex due to the presence of multiple carbon atoms and different types of bonds.
Maltose is a disaccharide made up of two glucose molecules linked together by a glycosidic bond. Each glucose molecule has five carbon atoms. The molecular geometry around each carbon atom in maltose depends on the types of bonds and the number of lone pairs of electrons on each carbon.
a) The first carbon in each glucose molecule is part of a linear chain of atoms, so it has a linear molecular geometry.
b) The second carbon in each glucose molecule is bonded to three other atoms (two carbons and one oxygen) and has one lone pair of electrons. This arrangement results in a trigonal pyramidal molecular geometry.
c) The third carbon in each glucose molecule is bonded to four other atoms (three carbons and one oxygen) and has no lone pairs of electrons. This arrangement results in a tetrahedral molecular geometry.
d) The fourth carbon in each glucose molecule is bonded to three other atoms (two carbons and one oxygen) and has one lone pair of electrons. This arrangement results in a trigonal planar molecular geometry.
e) The fifth carbon in each glucose molecule is bonded to four other atoms (three carbons and one oxygen) and has no lone pairs of electrons. This arrangement also results in a tetrahedral molecular geometry.
To learn more about molecular geometry of maltose, visit: https://brainly.com/question/31044827
#SPJ11
A substance that causes the oxidation of another substance is called an oxidizing agent.
a. true
b. false
The given statement, A substance that causes the oxidation of another substance is called an oxidizing agent is True because the oxidizing agent is a substance that causes the oxidation of another substance.
Oxidation is a chemical reaction in which electrons are transferred from one molecule to another, resulting in the formation of new molecules. Oxidizing agents can be various compounds such as oxygen, halogens, and certain metal ions.
Oxygen is the most common oxidizing agent and is used in many oxidation reactions. Halogens, such as chlorine, bromine and iodine, are also used as oxidizing agents in certain reactions.
Metal ions, such as iron, copper and manganese, may also act as oxidizing agents in reactions. Oxidizing agents are essential in biological processes such as respiration and metabolism, as well as industrial processes such as electricity generation and chemical manufacturing.
Know more about oxidizing agent here
https://brainly.com/question/10547418#
#SPJ11
The H NMR spectra of formic acid HCO2H, maleic acid cis - HO2CCH = CHCO2H and malonic acid HO2CCH2CO2H are similar in that each is characterized by two singlets of equal intensity. Match these compounds with the designations A, B and C on the basis of the appropriate H NMR chemical shift data. Compound A: signals at δ 3.2 and δ12.4Compound B: signals at δ 6.3 and δ12.4Compound C: signals at δ 8.0 and δ11.4
Based on the given H NMR chemical shift data, we can match the compounds as follows:
Compound A (δ 3.2 and δ 12.4) corresponds to malonic acid (HO2CCH2CO2H), as the two singlets result from the two chemically equivalent methylene (CH2) protons and the two carboxylic acid (CO2H) protons.
Compound B (δ 6.3 and δ 12.4) corresponds to maleic acid (cis-HO2CCH=CHCO2H). The signal at δ 6.3 is due to the two equivalent vinylic protons (CH=CH), while the signal at δ 12.4 results from the two carboxylic acid (CO2H) protons.
Compound C (δ 8.0 and δ 11.4) corresponds to formic acid (HCO2H). The signal at δ 8.0 arises from the single aldehyde proton (CH), and the signal at δ 11.4 is attributed to the carboxylic acid (CO2H) proton.
To know more about chemical shift click here:
https://brainly.com/question/30579222
#SPJ11
What volume of each of the following solutions contains 0.150mol of the solute?
a) 0.0025M HCl
b) 1.25M ZnSO4
Each one of the following includes 0.150mol of solute in a 0.0025M HCI volume.
What is a good example of volume through real life?The space that an item takes up. It is normally assessed in cubic units and estimated and use a variation of formulas. A hexagonal bathtub that also is 1 foot tall, two feet wide, & 4 feet long, for example, has a quantity of 8 cubic meters.
What's the most precise method for measuring volume?Volumetric flasks, burettes, or pipettes designed for measuring amounts of liquid tend to be the most accurate, of tolerances of less than 0.02. Precision measurements are required in research and testing, and many testing vessels are already designed to login for liquid residue which clings in a flask.
To know more about volume visit :
https://brainly.com/question/24189159
#SPJ1
A concentrated sucrose solution is poured into a cylinder of diameter 5.0 cm. The solution consisted of 10 g of sugar in 5.0 cm3 of water. A further 1.0 L of water is then poured very carefully on top of the layer, without disturbing the layer. Ignore gravitational effects, and pay attention only to diffusional processes. Find the concentration at 5.0 cm above the lower layer after a laps of the following time
a. 24 s __ M
b. 2.4 y ___ M
Since we are ignoring gravitational effects, we can assume that the sucrose solution and the water on top of it will mix through diffusion.
a)After 24 s, some diffusion will have occurred, but the concentration profile will not have fully mixed yet. We can use Fick's second law to find the concentration at 5.0 cm above the lower layer: ∂C/∂t = D(∂^2C/∂x^2).
where C is the concentration, t is time, x is distance, and D is the diffusion coefficient. Since we are only interested in the concentration at 5.0 cm above the lower layer, we can set x = 0.05 m. The diffusion coefficient for sucrose in water at room temperature is about 5.2 x 10^-10 m^2/s.
Using the initial conditions of 10 g of sugar in 5.0 cm^3 of water, we can calculate the initial concentration: C(0,0.05) = 10 g / (5.0 cm^3) = 2 g/cm^3, Now we can solve Fick's second law for C(24,0.05): C(24,0.05) = C(0,0.05) erfc[(0.05)/(2 sqrt(D t))].
erfc is the complementary error function, which can be found in tables or using a calculator. Plugging in the values, we get: C(24,0.05) = 1.10 g/cm^3
To convert to molarity, we need to divide by the molecular weight of sucrose (342.3 g/mol) and multiply by 1000 to convert from g/cm^3 to g/L: C(24,0.05) = 1.10 g/cm^3 / 342.3 g/mol * 1000 g/L = 3.21 x 10^-3 M.
b. After 2.4 years, diffusion will have had ample time to fully mix the solution. We can use the same initial conditions and diffusion coefficient as before, but now we need to solve Fick's second law for a much longer time: C(t,0.05) = C(0,0.05) erfc[(0.05)/(2 sqrt(D t))]
Plugging in the values, we get: C(2.4 years,0.05) = 0.5 g/cm^3
Converting to molarity as before, we get: C(2.4 years,0.05) = 0.5 g/cm^3 / 342.3 g/mol * 1000 g/L = 1.46 x 10^-3 M.
To know more about molarity click here
brainly.com/question/23686981
#SPJ11
Draw the substitution products that will be formed from the following SN1 reactions:
A. 3-bromo-3-methylpentane and methanol
B. 3-chloro-3-methylhexane and methanol
The substitution product of 3-bromo-3-methylpentane and methanol will be 3-methyl-3-pentanol, and The substitution product of 3-chloro-3-methylhexane and methanol will be 3-methyl-3-hexanol.
3-bromo-3-methylpentane and methanol undergo SN1 reaction as follows; Step 1; Ionization of the substrate
3-bromo-3-methylpentane → 3-methyl-3-pentyl cation + Br⁻
Step 2; Nucleophilic attack by methanol and deprotonation
3-methyl-3-pentyl cation + CH₃OH → 3-methyl-3-pentanol + H⁺
Therefore, the substitution product is 3-methyl-3-pentanol.
3-chloro-3-methylhexane and methanol undergo SN₁ reaction as follows; Step 1; Ionization of the substrate
3-chloro-3-methylhexane → 3-methyl-3-hexyl cation + Cl⁻
Step 2; Nucleophilic attack by methanol and deprotonation
3-methyl-3-hexyl cation + CH₃OH → 3-methyl-3-hexanol + H⁺
Therefore, the substitution product is 3-methyl-3-hexanol.
To know more about substitution product here
https://brainly.com/question/14052597
#SPJ4
What is the volume of 4.56 moles of gas at 0.634 atm and 75 °C?
Show your work
Answer:
Volume = 205
Explanation:
Using; PV = nRT
P (Pressure) = 0.634atm
V (Volume) = ?
n (Number of moles) = 4.56mol
R (Universal Gas Constant) = 0.082
T (Absolute Temperature) = 75+273 = 348K
0.634 × V = 4.56 × 0.082 × 348
V = 130.12416 ÷ 0.634
V = 205
How does mass relate to density?
Answer:
Density is grams / cm^3
Explanation:
Since The formular for density is mass over volume, most commonly cm^3, we can find the mass of a quantity given the volume. Say D=.5 g/cm^3. If we have 1 mL of a substance then we do 1 mL = 1cm^3
1 cm^3 x (.5 g / cm^3) = .5 g of the substance
the ocean's deep sound channel (sofar layer) is characterized as a zone in which
The ocean's deep sound channel is characterized as a zone in which sound waves are able to propagate for long distances with minimal attenuation
It is due to the unique properties of the water at that depth. The SOFAR layer is located at depths between 800 and 1200 meters, where the water temperature and pressure create a stable environment that allows sound waves to travel with little interference.
This layer acts as a barrier that traps and channels sound waves, allowing them to travel great distances without significant loss of energy. The unique acoustic properties of the SOFAR layer have important implications for oceanography, as it allows for the detection of distant underwater events such as earthquakes, volcanic eruptions, and the movements of marine mammals.
To know more about sofar layer click on below link :
https://brainly.com/question/1177283
#SPJ11