Explain why increasing the mass of a car affects how the car rolls down a ramp.

Answer:

D. upright, same size as object, virtual

Explanation:

it is a plane mirror, it has no changes

The characteristics of the image produced by the object placed in front of a plane mirror will be upright, the same size as the object, and virtual.

The law of reflection states that when a ray of light reflects back from a surface the angle of incidence of light on a surface is equal to the angle of reflection.

The image produced by an object in front of a plane mirror will be upright, the same size as the object, and virtual.

learn more about the law of reflection

https://brainly.com/question/18772331

#SPJ2

Answer:

2.12m/s

Explanation:

Given parameters:

Force on trolley  = 1.5N

Mass of trolley  = 0.2kg

Unknown:

Velocity of the trolley  = ?

Solution:

To solve this problem, we first find the acceleration of the trolley;

          Force  = mass x acceleration

         Acceleration  = [tex]\frac{Force }{mass}[/tex]

Insert the parameters and solve;

          Acceleration  = [tex]\frac{1.5}{0.2}[/tex]   = 7.5m/s²

Now to find the acceleration;

  Initial velocity  = 0m/s

  v² = u² + 2aS

v is the final velocity

u is the initial velocity

a is the acceleration

S is the distance

  Distance  = 30cm and this is 0.3m

     v² = 0² + 2(7.5)0.3  = 4.5

     v = √4.5 = 2.12m/s

Answer:

A.) 5s

B.) 2.29s

C.) 39.6 m/s

Explanation:

Given that a kid throws a rock off the edge of a cliff 60.0 m high. When he drops the rock, it takes 5,0sec for it to reach the ground below.

a.) Determine the time it takes to reach the ground below,

The time is 5s

b.) How long would it take the rock to hit the ground if he threw it down with a speed of 15m/sec?

Using the second equation of motion:

H = Ut + 1/2gt^2

Substitute all the parameters into the formula

60 = 15t + 1/2 × 9.8 × t^2

60 = 15t + 4.9t^2

Multiply all by 10

49t^2 + 150t - 600

t^2 + 3.06t = 12.24

( t + 1.53)^2 = 12.24 + 2.3409

t + 1.53 = sqrt ( 14.5809)

t = 3.82 - 1.53

t = 2.29s

is hit stmight upward and reach a maximum height of 80.0 m.

Using the third equation of motion

V^2 = U^2 - 2gH

At maximum height, V = 0

0 = U^2 - 2 × 9.8 × 80

U^2 = 1568

U = sqrt ( 1568)

U = 39.6 m/s

Explanation:

the answers are the first 3.

Answer:

4.6

Explanation:

Ans is 4.6 b coz the difference b/w 4.6 and the other values is comparitively the largest.

Answer:

The elements in the reactants are the same as the elements in the products

Explanation:

The condition for a balanced equation is as follows :

The number of atoms for each element in reactant = Number of atoms for each element in product.

Total charge on reactant and product must be same.

The example of a balanced equation is:

Reaction of carbon and hydrogen :

[tex]C+2H_2\rightarrow CH_4[/tex]

No. of carbon atom on Carbon on LHS = 1

No. of carbon atom on Hydrogen on LHS = 4

No. of carbon atom on Carbon on RHS = 1

No. of carbon atom on Hydrogen on RHS = 4

So, for a balanced equation, The elements in the reactants are the same as the elements in the products. Hence, the correct option (a).

Answer:

The answer is A

Explanation:

Answer:

The generated sound wave will not be able to reflect off of the object.

Explanation:

The statement that best describes this situation is: The generated sound wave will not be able to reflect off of the object.

An ultrasound machine is a device that is used to capture images in the human body for review by a medical examiner. The machine gives off sound waves that are reflected off body structures.

So, for the ultrasound machine being described, the absence of kidney stones will cause a non-reflection of the object to be captured.

Since the machine is in good working condition, the sound wave will be generated.

Learn more about ultrasound machines here:

https://brainly.com/question/6837690

Answer:

The answer is:

VA= 33 m/S

VB= 27.8 m/s

VC= 50 m/s

VD=66.7 m/s

VE=35.7 m/s

So, the Legs from the highest velocity to the lower are:

D - C - E - A - B

The explanation:

we are going to use the velocity formula:

Velocity = distance (m) / time (s)

So,

A) when D = 18 Km = 18000 m

and t = 9 min = 9*60 =540 s

So V = 18000m/ 540 S

      = 33 m/S

B) when D = 25 Km = 25000 m

and t = 15 min = 15 * 60 = 900 S

So V = 25000m / 900S

     = 27.8 m/s

C) when D = 24 Km = 24000 m

and t = 8 min = 8 * 60 = 480 s

So V = 24000m / 480s

     = 50 m/s

D) when D = 48 Km = 48000 m

and t = 12 min = 12 * 60 = 720 s

So V = 48000 m / 720s

       =66.7 m/s

E) when D = 15 km = 15000m

and t = 7 min = 7 * 60 = 420 s

So V = 15000m / 420s

      = 35.7 m/s

Answer:

589.3 nm

Explanation:

The wavelength of a sodium light is 5893 A.

We need to find the wavelength in nm.

[tex]5893\ A=5893\times 10^{-10}\ m[/tex]

Also, [tex]1\ nm=10^{-9}\ m[/tex]

[tex]5893\ A=5893\times 10^{-9}\times 10^{-1}\ m\\\\=5893\times 10^{-1}\ nm\\\\=589.3\ nm[/tex]

So, the wavelength of sodium light is 589.3 nm.

Answer:

The end of the ramp is 38.416 m high

Explanation:

Horizontal Motion

When an object is thrown horizontally with an initial speed v and from a height h, it follows a curved path ruled by gravity.

The maximum horizontal distance traveled by the object can be calculated as follows:

[tex]\displaystyle d=v\cdot\sqrt{\frac {2h}{g}}[/tex]

If the maximum horizontal distance is known, we can solve the above equation for h:

[tex]\displaystyle h=\frac {d^2g}{2v^2}[/tex]

The skier initiates the horizontal motion at v=25 m/s and lands at a distance d=70 m from the base of the ramp. The height is now calculated:

[tex]\displaystyle h=\frac {70^2\cdot 9.8}{2\cdot 25^2}[/tex]

[tex]\displaystyle h=\frac {4900\cdot 9.8}{2\cdot 625}[/tex]

h= 38.416 m

The end of the ramp is 38.416 m high

Answer:

She should bend her hips so her head is closer to the handlebars

Explanation:

Answer:

Yea its A

Explanation:

Answer:

Fₓ = maₓ

Fy = may

Explanation:

The Newton's Second Law tells us about the force. It says whenever an unbalanced force is applied to a body, an acceleration is produced in that body. The direction of this acceleration is in the direction of the force itself. Hence, the law can be written as:

F = ma

where,

F = Unbalanced force

m = mass of body

a = acceleration magnitude

We, can write two equations separately for x-direction and y-direction as follows:

Fₓ = maₓ

Fy = may

where,

Fₓ = x-component of unbalanced force

aₓ = x-component of acceleration

Fy = y-component of unbalanced force

ay = y-component of acceleration

This question is incomplete, the complete question is;

An engineer is tasked with developing a model to study a cylindrical heat exchanger in a steam system. The prototype cylinder is 2.54 cm in diameter and the steam properties are: velocity = 30 m/s; density = 0.6 kg/m³; and absolute viscosity = 1.197 X 10⁻⁵ N-s/m², respectively. The model is going to be tested in a water tunnel where the water temperature is 20°C and the velocity is 3 m/s

a) what is the prototype Reynolds number, based on using the cylinder diameter as the characteristic length?

b) what should be the diameter of the model be to ensure dynamic similitude?

Answer:

a) the prototype Reynolds number is 38195.488

b) 0.01278 m or 1.278 cm should be the diameter of the model be to ensure dynamic similitude

Explanation:

Given that;

1 prototype ; d = 2.54 cm = 0.0254 m, Vp = 30 m/s, Sp = 0.6 kg/m³, Up = 1.197 × 10⁻⁵ N-s/m²

Model{ water at 20°C}; dm = ?, Vm = 3 m/s, Pm = 998.23 kg/m³, Um = 1.002 × 10⁻³ N-s/m²

a) what is the prototype Reynolds number,

to calculate prototype Reynolds number we use the expression;

(Re)p = SpVpdP / Up

we substitute our value

(Re)p =  (0.6 × 30 × 0.0254) / 1.197 × 10⁻⁵

(Re)p = 38195.488

Therefore the prototype Reynolds number is 38195.488

b)

what should be the diameter of the model be to ensure dynamic similitude?

i.e dm = ?

so dynamic similarity [ viscous flow]

(Re)m = (Re)p

[PmVmdm / Um] = [SpVpdP / Up]

we substitute

[998.23 × 3 × dm / 1.002 × 10⁻³] = (0.6 × 30 × 0.0254) / 1.197 × 10⁻⁵

2994.69dm / 1.002 × 10⁻³ = 38195.488

2994.69dm = 38.2718

dm = 38.2718 / 2994.69

dm = 0.01278 m or 1.278 cm

Therefore 0.01278 m or 1.278 cm should be the diameter of the model be to ensure dynamic similitude

Answer:

3. lost electrons.

Explanation:

An atom that has lost an electron is positively charged because the number of protons is now greater than the number of electrons in the atom.

If the number of protons and electrons are the same, the atom has no charge

If the protons > electrons, the atom becomes positively charged

If electrons > protons, the atom becomes negatively charged.

Atoms becomes charged by losing or gaining electrons.

Answer:

(a) V₁ =  1.06 m/s

(b) V₂ = 4.24 m/s

(c) Q = 4.08 x 10⁻³ m³/s

Explanation:

(b)

The formula derived for Venturi tube can be used here:

P₁ - P₂ = (ρ/2)(V₂² - V₁²)

where,

P₁ - P₂ = Difference in Pressure = (2x 10⁴ Pa) - (1.25 x 10⁴ Pa) = 0.75 x 10⁴ Pa

ρ = Density of Oil = 890 kg/m³

V₂ = Velocity at Higher End = ?

V₁ = Velocity at Lower End = ?

Therefore,

0.75 x 10⁴ Pa = [(890kg/m³)/2](V₂² - V₁²)

V₂² - V₁² = (0.75 x 10⁴ Pa)/(445 kg/m³)

V₂² - V₁² = 16.85 m²/s²   ------------------- equation (1)

Now, we will use continuity equation:

A₁V₁ = A₂V₂

where,

A₁ = Lower End Area = πd₁²/4 = π(0.07 m)²/4 = 3.848 x 10⁻³ m²

A₂ = Higher End Area = πd₂²/4 = π(0.035 m)²/4 = 9.621 x 10⁻⁴ m²

Therefore,

(3.848 x 10⁻³ m²)V₁ = (9.621 x 10⁻⁴ m²)V₂

V₁ = (9.621 x 10⁻⁴ m²)V₂/(3.848 x 10⁻³ m²)

V₁ = 0.25 V₂   -------------------- equation (2)  

using this value in equation (1):

V₂² - (0.25 V₂)² = 16.85 m²/s²

0.9375 V₂² = 16.85 m²/s²

V₂² = (16.85 m²/s²)/0.9375

V₂ = √(17.97 m²/s²)

V₂ = 4.24 m/s

(a)

using the value of V₂ in equation (2):

V₁ = 0.25(4.24 m/s)

V₁ =  1.06 m/s

(c)

For fluid flow rate we use the following equation:

Flow Rate = Q = A₂V₂ = (9.621 x 10⁻⁴ m²)(4.24 m/s)

Q = 4.08 x 10⁻³ m³/s

The speed if the fluid increases as pressure decreases.

(a)  The speed of the flow in the lower section is 1.06 m/s

(b)  The speed of the flow in the higher section is  4.24 m/s

(c) The volume flow rate in the pipe [tex]\bold {4.08 x 10^-^3m^3/s}[/tex].

The relation pressure and volume in constricted pipe can be derived by the formula formula ,

[tex]\bold {P_1 - P_2 = (\rho /2)(V_2^2 - V_1^2)}[/tex]

Where,

P₁ - P₂ -Difference in Pressure = [tex]\bold { 0.75 x 10^4}[/tex]

[tex]\rho[/tex] - Density of Oil = 890 kg/m³

V₂ - Velocity at Higher End = ?

V₁ - Velocity at Lower End = ?

put the values in the formula,

[tex]\bold {0.75 x 10^4 Pa = \dfrac{(890kg/m^3)}{2(V_2^2 - V_1^2)}}\\\\\bold {V_2^2 - V_1^2 = \dfrac {0.75 x 10^4 Pa}{445 kg/m^3}}\\\\\bold {V_2^2 - V_1^2 = 16.85 m^2/s^2}[/tex]

The continuity equation,

[tex]\bold {A_1V_1 = A_2V_2}[/tex]

Where,

[tex]\bold {A_1 }[/tex] - Area of lower end = [tex]\bold {3.848 x 10^-^3m^2}[/tex]

[tex]\bold {A_2 }[/tex] - Area of higher end = [tex]\bold {9.621 x 10^-^4m^2}[/tex]

Put the value in the formula above,

[tex]\bold {(3.848 x 10^-^3m^2)V_1= (9.621 x 10^-^4m^2)V^2}\\\\\bold {V_1 = \dfrac {(9.621 x 10^-^4 m^2)V_2}{(3.848 x 10^-^3 m^2)}}\\\\\bold {V_1 = 0.25 \times V_2}[/tex]

Put the value of [tex]\bold {V_1}[/tex], we get

[tex]\bold {V_2= 4.24 m/s}[/tex]

Therefore,

[tex]\bold {V1 = 0.25 (4.24 m/s)}\\\\\bold {V_1 = 1.06 m/s}[/tex]

The flow rate

[tex]\bold {Q = A_2V_2}[/tex]

[tex]\bold {Q = (9.621 x 10^-^4 m^2)(4.24 m/s)}\\\\\bold {Q = 4.08 x 10^-^3m^3/s}[/tex]

Therefore, the flow rate of the oil in the pipe is [tex]\bold {4.08 x 10^-^3m^3/s}[/tex].

To know more about Bernoulli's equation, refer to the link:

https://brainly.com/question/5531068

Answer:

The correct answer is A. 8.0. In 2011, no fertiziler was added to the soil so the pH was not affected.

PHYSICS

Mass = 10 kg

Force = 2 N

Acceleration = ____?

Answers :

[tex]f \: = m \times a[/tex]

2 = 10 × a

2 / 10 = a

0,2 m/s² = a ✅

Answer:

♡ madeline here ♡

you forgot the attachment, luv ☆

have a great day!

- madeline/madi ✧･ﾟ: *✧･ﾟ:･ﾟ✧*:･ﾟ✧･ﾟ

Explanation:

OPENNNN

I AM CORRECT AND DATS MY NAMEEE OO I BE LIKE 2POC CHAINS:);)

Answer:

Provide more than one path for current flow. (answer option A)

Explanation:

When one connects resistors in parallel, one provides more than a single path for the current to flow. The current separates on each branch according to the resistance it experiences.

a). My estimate is 18.75 mph.

b). The average speed is 18.75 mph.

I nailed it.

Answer: B. 0 kg*m/s

Explanation:

Answer:

57,000,000,000(fifty-seven billion)

Explanation:

19000000000/ 1/3 = 57000000000

Answer:

Explanation:

The work done by an object can be found by using the formula

workdone = force × distance

From the question we have

workdone = 50 × 10

We have the final answer as

Hope this helps you

Answer: (B) non-stochastic effects such as severe burns and radiation sickness resulting from the short-term, high-level exposure

Explanation: edgeunity

The impact of best for Gertrude to consider when planning what may happen to the character is non-stochastic effects.

It is that impact where incidence and severity based on dose.

Since as per the given situation, Gertrude writes a short story so here the character should be considered as the non-stochastic effects like burning and the radiation sickness that leads from the short term and high level of exposure.

learn more about flood here: https://brainly.com/question/22708021

Answer:

A

Explanation:

The line(A) goes throughout the entire picture. So therefore choice A would be it's length.