Ethylene glycol, is used as antifreeze for automobile engines. If you want to produce 2.00 kg of ethylene glycol from the reaction of C2H4Cl2 and Na2CO3 , what is the minimum amount of Na2CO3that is needed?
C2H4Cl2(l)+Na2CO3(s)+H2O(l)→C2H6O2(l)+2NaCl(aq)+CO2(g)

Once you know the gem's refractive index, you may use the formula to determine the Brewster's angle in degrees. When the gem is submerged in water, light will be totally polarised at this angle.

To determine the angle at which light would be completely polarized when a gem is in water, we need to use Brewster's angle formula. The terms involved are

1. Brewster's angle (θ_B)
2. Refractive indices (n1 and n2)

The Brewster's angle formula is:

θ_B = arctan(n2 / n1)

where n1 is the refractive index of the first medium (water) and n2 is the refractive index of the second medium (gem).

1: Find the refractive indices of water and the gem.
For water, n1 = 1.33 (approximately). You will need the refractive index of the gem (n2) to continue. Let's assume it is x.

2: Calculate Brewster's angle.
_B = arctan(x) / 1.33 3: Convert the angle from radians to degrees.
θ_B (in degrees) = (θ_B in radians) * (180 / π)

Once you have the refractive index of the gem, plug it into the formula and calculate the Brewster's angle in degrees. At this angle, light will be completely polarized when the gem is in water.

For more such questions on gem , click on:

https://brainly.com/question/12590

#SPJ11

The pH of the solution is 7.025. The pH serves as a gauge for a solution's acidity or basicity (alkalinity). A pH of 7 is regarded as neutral, while values below 7 are acidic and over 7 are basic (alkaline).

To calculate the pH of the solution containing 0.366 M NH2NH2 and 0.236 M NH2NH3Cl, we need to first find the concentration of OH- ions. We will use the Kb expression and an ICE table for the reaction:
NH2NH2 + H2O ⇌ NH2NH3+ + OH-
Kb = [NH2NH3+][OH-] / [NH2NH2]
Initial concentrations:
[NH2NH2] = 0.366 M
[NH2NH3+] = 0.236 M (from NH2NH3Cl)
[OH-] = 0 M
Change in concentrations:
[NH2NH2] = -x
[NH2NH3+] = +x
[OH-] = +x
Equilibrium concentrations:
[NH2NH2] = 0.366 - x
[NH2NH3+] = 0.236 + x
[OH-] = x
Now we can plug the values into the Kb expression:
1.7 x 10^-6 = (x)(0.236 + x) / (0.366 - x)
Solve for x, which represents the concentration of OH- ions. After finding x, use the following equation to find the pOH:
pOH = -log10([OH-])
Finally, calculate the pH using the relationship:
pH = 14 - pOH

Learn more about The pH here:

https://brainly.com/question/31357379

#SPJ11

Buffer 2 has higher capacity, both buffers resist pH changes better than DI water, adding acid lowers pH, Buffer 2 initially responds to base but then exceeds capacity, Buffer 1 is overwhelmed by base, and capacity was calculated using Henderson-Hasslcelbah equation and compared to experimental data.

The capacity of the more concentrated Buffer 2 is higher than that of the diluted solution, whereas the capacity of Buffer 1 is approximately the same for both the diluted and concentrated solutions.

The buffers are more effective than DI water because they can resist changes in pH by accepting or donating protons. Adding an acid to both Buffer 1 and 2 results in a decrease in pH, indicating that the buffer capacity is being utilized. Adding a base to Buffer 1 results in an increase in pH, indicating that the buffer capacity is being exceeded. However, adding a base to Buffer 2 initially results in a slight decrease in pH, indicating that the buffer capacity is being utilized, but then the pH increases rapidly, indicating that the buffer capacity is being exceeded.

The capacity of the buffer can be calculated using the Henderson-Hasselbalch equation:

Capacity = (Buffer Concentration) x (ΔpH/Δlog[Base/Acid])

Experimental data can be compared to the calculated capacity to determine the accuracy of the buffer preparation and measurement.

To know more about buffer, here

brainly.com/question/22821585

#SPJ4

When solid carbon dioxide (dry ice) vaporizes to gas, it undergoes a phase change from solid to gas without melting into a liquid. This process is called sublimation.

To calculate the volume of gas produced, we can use the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.

First, we need to determine the number of moles of gas produced. We can use the molar mass of carbon dioxide to convert from mass to moles:

moles of CO2 = mass of dry ice / molar mass of CO2

moles of CO2 = 500.0 g / 44.0 g/mol

moles of CO2 = 11.36 mol

Since the dry ice sublimes directly to a gas, all of the moles of CO2 will be in the gas phase.

Next, we can plug in the values we know into the ideal gas law:

PV = nRT

V = nRT / P

where R is the ideal gas constant, which has a value of 0.08206 L·atm/(mol·K).

Converting the temperature to Kelvin:

T = 25.0 °C + 273.15 = 298.15 K

Plugging in the values:

V = (11.36 mol) x (0.08206 L·atm/(mol·K)) x (298.15 K) / (1.75 atm)

V = 439.4 L

Therefore, the volume of gas produced is approximately 439.4 L.

The estimated boiling point of argon at 1.5 atm is approximately 87.6 K. We can use the Clausius-Clapeyron equation:
ln(P2/P1) = ΔHvap/R * (1/T1 - 1/T2)

R = 8.314 J/mol·K
P1 = 1 atm = 101.325 kPa
T1 = 87.3 K
ΔHvap = 6.53 kJ/mol
P2 = 1.5 atm = 152.0 kPa
First, convert the units of ΔHvap to J/mol:
ΔHvap = 6.53 kJ/mol * 1000 J/kJ = 6530 J/mol
Substituting the values into the equation and solving for T2:
ln(152.0 kPa/101.325 kPa) = 6530 J/mol / (8.314 J/mol·K) * (1/87.3 K - 1/T2)
ln(1.5) = 785.5 K / (8.314 J/mol·K) * (1/87.3 K - 1/T2)
0.4055 = 94.41 * (1/87.3 K - 1/T2)
0.004296 K = 1/T2 - 0.011463 K
1/T2 = 0.011463 K + 0.004296 K = 0.01576 K
T2 = 1 / 0.01576 K = 63.4 K
Therefore, the estimated boiling point of argon at 1.5 atm is 63.4 K.

To estimate the boiling point of argon at 1.5 atm, we can use the Clausius-Clapeyron equation:
ln(P2/P1) = (ΔHvap/R) * (1/T1 - 1/T2)
where P1 and P2 are the initial and final pressures (in atm), T1 and T2 are the initial and final boiling points (in K), ΔHvap is the enthalpy of vaporization (in J mol-1), and R is the gas constant (8.314 J mol-1 K-1).
Given values:
P1 = 1 atm
P2 = 1.5 atm
T1 = 87.3 K
ΔHvap = 6.53 kJ mol-1 = 6530 J mol-1
We need to solve T2. Rearranging the equation for T2:
1/T2 = (ln(P2/P1) * R / ΔHvap) + 1/T1
Plugging in the values:
1/T2 = (ln(1.5/1) * 8.314 / 6530) + 1/87.3
1/T2 ≈ 0.01142
T2 ≈ 87.6 K
The estimated boiling point of argon at 1.5 atm is approximately 87.6 K.

Learn more about the Clausius-Clapeyron equation here: brainly.com/question/2688896

#SPJ11

The estimated boiling point of argon at 1.5 atm is approximately 87.6 K. We can use the Clausius-Clapeyron equation:
ln(P2/P1) = ΔHvap/R * (1/T1 - 1/T2)

R = 8.314 J/mol·K
P1 = 1 atm = 101.325 kPa
T1 = 87.3 K
ΔHvap = 6.53 kJ/mol
P2 = 1.5 atm = 152.0 kPa
First, convert the units of ΔHvap to J/mol:
ΔHvap = 6.53 kJ/mol * 1000 J/kJ = 6530 J/mol
Substituting the values into the equation and solving for T2:
ln(152.0 kPa/101.325 kPa) = 6530 J/mol / (8.314 J/mol·K) * (1/87.3 K - 1/T2)
ln(1.5) = 785.5 K / (8.314 J/mol·K) * (1/87.3 K - 1/T2)
0.4055 = 94.41 * (1/87.3 K - 1/T2)
0.004296 K = 1/T2 - 0.011463 K
1/T2 = 0.011463 K + 0.004296 K = 0.01576 K
T2 = 1 / 0.01576 K = 63.4 K
Therefore, the estimated boiling point of argon at 1.5 atm is 63.4 K.

To estimate the boiling point of argon at 1.5 atm, we can use the Clausius-Clapeyron equation:
ln(P2/P1) = (ΔHvap/R) * (1/T1 - 1/T2)
where P1 and P2 are the initial and final pressures (in atm), T1 and T2 are the initial and final boiling points (in K), ΔHvap is the enthalpy of vaporization (in J mol-1), and R is the gas constant (8.314 J mol-1 K-1).
Given values:
P1 = 1 atm
P2 = 1.5 atm
T1 = 87.3 K
ΔHvap = 6.53 kJ mol-1 = 6530 J mol-1
We need to solve T2. Rearranging the equation for T2:
1/T2 = (ln(P2/P1) * R / ΔHvap) + 1/T1
Plugging in the values:
1/T2 = (ln(1.5/1) * 8.314 / 6530) + 1/87.3
1/T2 ≈ 0.01142
T2 ≈ 87.6 K
The estimated boiling point of argon at 1.5 atm is approximately 87.6 K.

Learn more about the Clausius-Clapeyron equation here: brainly.com/question/2688896

#SPJ11

The decreasing atomic size is in the order (a) Pb > Sn > Ge, (b) Na > Mg > Be, (c) K >S > Cl, (d) Be > C > O.

(a) Pb > Sn > Ge

Reason: This is because the atomic size generally decreases from top to bottom within a group in the periodic table.

(b) Na > Mg > Be

Reason: This is because the atomic size generally decreases from left to right across a period in the periodic table.

(c) K > Cl > S

(d) Be > C > O

Reason: This is because the atomic size generally decreases from left to right across a period in the periodic table. Be (beryllium) has the largest atomic size among the three elements because it is located towards the left side of the period, while C (carbon) has a slightly smaller atomic size, and O (oxygen) has the smallest atomic size as it is located towards the right side of the period.

To know more about Atomic Size:

https://brainly.com/question/14656441

#SPJ11

The decreasing atomic size is in the order (a) Pb > Sn > Ge, (b) Na > Mg > Be, (c) K >S > Cl, (d) Be > C > O.

(a) Pb > Sn > Ge

Reason: This is because the atomic size generally decreases from top to bottom within a group in the periodic table.

(b) Na > Mg > Be

Reason: This is because the atomic size generally decreases from left to right across a period in the periodic table.

(c) K > Cl > S

(d) Be > C > O

Reason: This is because the atomic size generally decreases from left to right across a period in the periodic table. Be (beryllium) has the largest atomic size among the three elements because it is located towards the left side of the period, while C (carbon) has a slightly smaller atomic size, and O (oxygen) has the smallest atomic size as it is located towards the right side of the period.

To know more about Atomic Size:

https://brainly.com/question/14656441

#SPJ11

The reaction enthalpy per mole of calcium is -652.8 kJ/mol Ca when specific heat of the solution is 4.180.

The first step is to calculate the heat absorbed by the solution. The mass of the solution is 100.0 g + (5.00 g / 1.03 g/mL) = 105.83 g. The change in temperature is ΔT = 35.5 °C - 20.5 °C = 15.0 °C. Using the specific heat of the solution, q = (105.83 g)(4.180 J/g°C)(15.0 °C) = 69917 J.

Next, we need to calculate the number of moles of HCl that reacted. Since the concentration of the HCl solution is 2.500 M, there are 2.500 mol of HCl per liter of solution. Therefore, in 100.0 g of solution, there are (100.0 g / 1.03 g/mL) x (1 L / 1000 mL) x (2.500 mol/L) = 0.24375 mol of HCl. Since the reaction between Ca and HCl is 1:2, the number of moles of Ca that reacted is half that, or 0.12188 mol.

Finally, we can calculate the reaction enthalpy per mole of Ca. ΔH_rxn = q / n, where n is the number of moles of Ca that reacted. Therefore, ΔH_rxn = (69917 J) / (0.12188 mol) = -572944 J/mol Ca. Converting to kJ/mol Ca, we get -572.944 kJ/mol Ca. However, this value is for the reaction of 0.12188 mol of Ca. To get the reaction enthalpy per mole of Ca, we need to multiply this value by the factor 1/0.12188 mol Ca. This gives us -652.8 kJ/mol Ca as the final answer.

Learn more about reaction enthalpy here:

https://brainly.com/question/1657608

#SPJ11

True. This reaction involves the cleavage of the ester bond in ethyl acetate by sodium hydroxide, resulting in the formation of sodium acetate and ethanol. This process is known as hydrolysis.

The balanced chemical reaction for the hydrolysis of ethyl acetate with sodium hydroxide is:

CH3COOCH2CH3 + NaOH → CH3COONa + CH3CH2OH

In this reaction, ethyl acetate (CH3COOCH2CH3) is hydrolyzed (split apart by the addition of water) in the presence of sodium hydroxide (NaOH) to form sodium acetate (CH3COONa) and ethanol (CH3CH2OH). The hydrolysis of ethyl acetate is an example of a nucleophilic acyl substitution reaction, where the nucleophile (in this case, the hydroxide ion from NaOH) attacks the carbonyl carbon of the ester (ethyl acetate) and forms a new bond, breaking the original bond between the carbonyl carbon and the ester group.

The balanced equation above shows that the number of atoms of each element is the same on both sides of the equation, indicating that the reaction is balanced. Thus, the statement is true.

Learn more about nucleophilic acyl substitution reaction here:

https://brainly.com/question/29990955

#SPJ11

In the study of enzymes, a sigmoidal plot of substrate concentration (S) versus the reaction velocity (V) indicates that the enzyme exhibits cooperative binding of the substrate.

This means that as the substrate concentration increases, the enzyme undergoes a conformational change that enhances its catalytic activity, leading to an increase in reaction velocity. This behavior is characterized by a slow initial phase, followed by a rapid increase in reaction velocity.

And finally a plateau phase where the reaction velocity reaches its maximum. The sigmoidal plot is also known as the Michaelis-Menten curve and is used to determine the kinetic parameters of enzyme-catalyzed reactions.

To know more about concentration click here

brainly.com/question/29276511

#SPJ11

The balanced half-reactions for this chemical reaction are: - Oxidation: Cr → Cr^+4 + 4e^-
- Reduction: 2I2 + 4e^- → 4I^-

This chemical reaction. The given reaction is Cr + 2I2 → CrI4. To write the balanced half-reactions for oxidation and reduction, follow these steps:

1. Identify the oxidation states of the elements in the reactants and products:
- Cr: 0 (in its elemental form)
- I2: 0 (in its elemental form)
- CrI4: Cr has an oxidation state of +4, and each I has an oxidation state of -1.

2. Determine which element is oxidized and which is reduced:
- Cr goes from 0 to +4, so it's being oxidized.
- I2 goes from 0 to -1, so it's being reduced.

3. Write the unbalanced half-reactions for oxidation and reduction:
- Oxidation: Cr → Cr^+4 + 4e^-
- Reduction: 2I2 + 4e^- → 4I^-

4. Balance the half-reactions:
- Oxidation is already balanced: Cr → Cr^+4 + 4e^-
- Reduction is also balanced: 2I2 + 4e^- → 4I^-

So, the balanced half-reactions for this chemical reaction are:
- Oxidation: Cr → Cr^+4 + 4e^-
- Reduction: 2I2 + 4e^- → 4I^-

to learn more about chemical reaction click here:

https://brainly.com/question/7341531

#SPJ11

The hydrolysis of aspartame in an aqueous solution of HCl would result in the formation of its constituent amino acids, aspartic acid and phenylalanine, as well as methanol, and chloride ions. Acid/base equilibrium should be considered when drawing the reaction products.

If aspartame were completely hydrolyzed in an aqueous solution of HCl, several products would be obtained due to the presence of multiple hydrolyzable bonds. Aspartame contains two peptide bonds that can be hydrolyzed by acid. The hydrolysis of these bonds would result in the formation of the amino acids aspartic acid and phenylalanine. Additionally, aspartame contains an ester bond that can also be hydrolyzed by acid. This would result in the formation of methanol and the dipeptide aspartyl phenylalanine.
It is important to consider acid/base equilibrium when drawing the reaction mechanism for this hydrolysis. In an aqueous solution of HCl, the acid will dissociate into H+ and Cl- ions. The H+ ions will then react with the aspartame molecule, protonating the peptide bonds and ester bonds. This will make the bonds more susceptible to nucleophilic attack by water molecules, resulting in the hydrolysis of the bonds and the formation of the aforementioned products. The equilibrium of the reaction will depend on the concentration of the H+ ions and the rate of hydrolysis relative to the rate of the reverse reaction.

Learn more about aqueous solution here:

https://brainly.com/question/26856926

#SPJ11

The nitration products of the compounds are:

1. For p-chlorophenol: 4-chloro-2-nitrophenol
2. For m-nitrochlorobenzene: 1,3-dichloro-5-nitrobenzene



1. Nitration of p-chlorophenol:
- p-chlorophenol (C₆H₄ClOH) reacts with a nitrating agent like HNO₃/H₂SO₄.
- The nitro group (NO2) replaces the hydrogen on the ortho position due to the activating effect of the hydroxyl group.
- The final product is 4-chloro-2-nitrophenol (C₆H₃Cl(NO₂)OH).

2. Nitration of m-nitrochlorobenzene:
- m-nitrochlorobenzene (C₆H₄ClNO₂) reacts with a nitrating agent like HNO₃/H₂SO₄.
- The nitro group (NO₂) on the benzene ring deactivates it, directing the incoming electrophile to the meta position.
- The final product is 1,3-dichloro-5-nitrobenzene (C₆H₃Cl₂(NO₂)).

To know more about electrophile click on below link:

https://brainly.com/question/31182532#

#SPJ11

The concentration of NH₄Cl is 0.39 M, which means the concentration of NH⁴⁺ and Cl⁻ is also 0.39 M. The pH of the solution will be obtained after calculation as 9.665.

The first step to solve this problem is to write the equation for the reaction of  NH₄Cl with water:

NH₄Cl + H₂O → NH⁴⁺ + Cl⁻ + H₃O⁺

The concentration of  NH₄Cl is 0.39 M, which means the concentration of  NH⁴⁺  and Cl⁻ is also 0.39 M. At equilibrium, the concentration of  H₃O⁺ can be calculated using the equilibrium constant expression for the reaction of NH⁴⁺ with water:

Kb = [NH⁴⁺ ][OH⁻]/[NH₃]

Kb for NH₃ is 1.8 × 10⁻⁵, so:

4.74 = -㏒(Kb) = -㏒([NH⁴⁺ ][OH⁻]/[NH₃])

Solving for [OH⁻], we get:

[OH⁻] = Kb[NH₃]/[NH⁴⁺] = 1.8 × 10⁻⁵ / 0.39 = 4.62 × 10⁻⁵ M

Finally, we can use the equation for the ion product of water to find the concentration of H₃O⁺:

Kw = [H₃O⁺][OH⁻] = 1.0 × 10⁻¹⁴

[H₃O⁺] = Kw / [OH⁻] = 1.0 × 10⁻¹⁴/ 4.62 × 10⁻⁵ = 2.16 × 10⁻¹⁰ M

Taking the negative logarithm of [H₃O⁺], we get the pH of the solution:

pH = -㏒[H₃O⁺] = -㏒(2.16 × 10⁻¹⁰) = 9.665

Therefore, the pH of the solution is 9.665.

Learn more about pH of a solution here :

https://brainly.com/question/30934747

#SPJ1

The reaction in which ADP is converted to ATP with a need of 7.3 kcal is an endergonic reaction. An endergonic reaction is a reaction that requires energy to proceed,

as opposed to an exergonic reaction, which releases energy. In this case, the conversion of ADP to ATP requires energy input, specifically 7.3 kcal per mole of reaction. This energy input comes The reaction in which ADP is converted to ATP with a need of 7.3 kcal is an endergonic reaction from an exergonic reaction such as the breakdown of glucose during cellular respiration.

Learn more about   ADP  here:

https://brainly.com/question/30970677

#SPJ11

The concentration of KMnO4 from the titration is 0.04117 mol/L.

To determine the concentration of KMnO4, we need to use the balanced chemical equation for the reaction between iron(II) and permanganate ions:

5Fe2+(aq) + MnO4-(aq) + 8H+(aq) → 5Fe3+(aq) + Mn2+(aq) + 4H2O(l)

We know that the iron(II) solution has a concentration of 0.05000 mol/L, and we can calculate the number of moles of iron(II) in the 10.00 mL sample as:

n(Fe2+) = C(Fe2+) x V(Fe2+)

n(Fe2+) = 0.05000 mol/L x 10.00 mL / 1000 mL/L

n(Fe2+) = 0.0005000 mol

According to the stoichiometry of the reaction, each mole of iron(II) reacts with one mole of permanganate ions. Therefore, the number of moles of permanganate ions used in each trial is equal to the number of moles of iron(II):

n(MnO4-) = n(Fe2+) = 0.0005000 mol

We can then calculate the concentration of KMnO4 in each trial using the volume and number of moles of permanganate ions:

C(KMnO4) = n(MnO4-) / V(KMnO4)

Using the data provided, we get:

Trial 1: C(KMnO4) = 0.0005000 mol / 0.01244 L = 0.04016 mol/L

Trial 2: C(KMnO4) = 0.0005000 mol / 0.01199 L = 0.04170 mol/L

Trial 3: C(KMnO4) = 0.0005000 mol / 0.01188 L = 0.04203 mol/L

Trial 4: C(KMnO4) = 0.0005000 mol / 0.01193 L = 0.04178 mol/L

To obtain the average concentration of KMnO4, we can add up the four trial concentrations and divide by the number of trials:

C(KMnO4)avg = (0.04016 mol/L + 0.04170 mol/L + 0.04203 mol/L + 0.04178 mol/L) / 4

C(KMnO4)avg = 0.04117 mol/L

Therefore, the concentration of KMnO4 is 0.04117 mol/L, and we should report our answer to four significant digits, which is the same number of significant digits as the original concentration of iron(II).

Learn more on titration here https://brainly.com/question/2496608

#SPJ1

The expression for Kb for the weak base Hypochlorite  is: Kb =Methanoic Acid Aud-01 Genual formula of Carboxylic.

The acid ionisation constant is the name given to the dissociation constant for an aqueous solution of a weak acid (Ka). Similar to this, the base ionisation constant serves as the equilibrium constant for the reaction of a weak base with water (Kb). KaKb=Kw for any conjugate acid-base pair.

The expression for Kb for the weak base Hypochlorite can be constructed using the definition of Kb, which is:

Kb = [hydroxide-][hypochlorous acid]/[Hypochlorite "]

Using the given chemical equation, we can write:

Hypochlorite - + water = hydroxide- + hypochlorous acid

Taking the equilibrium constant expression for this equation, we get:

Kw/Ka = [hydroxide-][hypochlorous acid]/[Hypochlorite "]

where Kw is the ion product constant for water and Ka is the acid dissociation constant for hypochlorous acid.

Since Kw is constant, we can replace it with Kb for the base Hypochlorite :

Kb = Kw/Ka = [hydroxide-][hypochlorous acid]/[Hypochlorite "]

Therefore, the expression for Kb for the weak base Hypochlorite is:

Kb =Methanoic Acid Aud-01 Genual formula of Carboxylic.

To know more about Hypochlorite  visit:-

https://brainly.com/question/10423391

#SPJ1

To calculate the pH during the titration, we need to determine the moles of morphine and HCl present at each point of the titration. the pH of the solution after 5.55 mL of HCl have been added is approximately 2.064.

Initial moles of morphine = (20.00 mL)(0.1000 mol/L) = 0.00200 mol

At 5.55 mL of HCl added, the moles of HCl = (5.55 mL)(0.2000 mol/L) = 0.00111 mol

To determine the moles of morphine left, we need to use the stoichiometry of the reaction between morphine and HCl. From the balanced equation:

Morphine(aq) + HCl(aq) → MorphineHCl(aq)

1 mol + 1 mol → 1 mol

Therefore, the moles of morphine remaining after 5.55 mL of HCl have been added is:

0.00200 mol - 0.00111 mol = 0.00089 mol

Now we can calculate the concentration of morphine at this point:

[[tex]H^{-}[/tex]] = sqrt(Kb * [morphine]) = sqrt(1.6E-6 * 0.00089) = 1.03E-4 M

The HCl has reacted with some of the morphine to form morphine hydrochloride, which is a strong acid. So the pH of the solution will be determined by the excess HCl present.

The moles of excess HCl is:

0.00111 mol - 0.00089 mol = 0.00022 mol

The total volume of the solution is:

20.00 mL + 5.55 mL = 25.55 mL = 0.02555 L

The concentration of excess HCl is:

0.00022 mol / 0.02555 L = 0.0086 M

The pH can be calculated using the Henderson-Hasselbalch equation:

pH = pKa + log([[tex]A^{-}[/tex]]/[HA])

In this case, the acid is HCl and its pKa is -log(1.0) = 0, so the equation simplifies to:

pH = -log([[tex]H^{+}[/tex]]) = -log(0.0086) = 2.064

Therefore, the pH of the solution after 5.55 mL of HCl have been added is approximately 2.064.

Learn more about pH during

https://brainly.com/question/29786836

#SPJ4

Based on the terms you provided, it seems like you are working on a lab experiment to separate three compounds - 3-Nitroaniline, Benzoic Acid, and Naphthalene. The data you collected includes the initial mixture composition with 0% Nitroaniline, 95% Naphthalene, and 5% Benzoic Acid. You also recovered 0.95g of Naphthalene and 0.95g of Benzoic Acid.

To calculate the mass of Nitroaniline, you can subtract the masses of Naphthalene and Benzoic Acid from the initial mixture mass. Therefore, the mass of Nitroaniline would be:
Mass of Nitroaniline = Mass of initial mixture - Mass of Naphthalene - Mass of Benzoic Acid
Mass of Nitroaniline = 100g - 95g - 0.95g
Mass of Nitroaniline = 3.05g
To calculate the percentage of Benzoic Acid recovered, you can use the formula:
% Recovery = (Mass of recovered compound / Mass of initial compound) x 100
Therefore, the percentage of Benzoic Acid recovered would be:
% Recovery = (0.95g / 1g) x 100
% Recovery = 95%

learn more about Nitroaniline here

https://brainly.com/question/17114364?referrer=searchResults

#SPJ11

Data And Report Submission Separation Of 3-Nitroaniline, Benzoic Acid, And Napthalene (2pts) Separation of Benzoic Acid, Nitroaniline; and Naphthalene Are YOU completing thhis expenment cnline? Data Collection MA of the Oridinal NAtnce utmixtult= naphthal 0/95 DAd Tecvened e-AMtcanmca 026 5 Mass of recovered benzoic acid 0,/95 (12pts) Calculations (3pts} mass nanhthalene oricina (3pts; by Mass nitroaniline crigina samm (Jpts} MM hemzalc: Acle ucIa $amole (3pts} percen: eccvered Spts) Post Lab Questions (Spts} Youfing separatcry funnel hume hocd Thera <re clearlytwo visic avers Mescrite Methodyou coulduse dererm which aqueoue Natme IlY X *_ Fi= 01 O (1Dpts) It vouhad mixture 0f butyri acid andherane; hc would yo- separate Ihetwo compounds?

Thus,  -OCH3 is more reactive than [tex]CHCl_{2}[/tex] towards electrophilic aromatic substitution due to its electron-donating nature.

To assign a relative order of reactivity towards electrophilic aromatic substitution for the following three compounds: -[tex]OCH_{3}[/tex], and [tex]CHCl_{2}[/tex], we need to consider their electron-donating or withdrawing capabilities.

1. [tex]OCH_{3}[/tex]: This is a methoxy group, which is an electron-donating group (EDG). It donates electrons through resonance, activating the aromatic ring and making it more reactive towards electrophilic aromatic substitution.

2. [tex]CHCl_{2}[/tex]: This is a dichloromethyl group, which is an electron-withdrawing group (EWG). It withdraws electrons through the inductive effect, deactivating the aromatic ring and making it less reactive towards electrophilic aromatic substitution.

To know more about Electrophilic Substitution:

https://brainly.com/question/30867545

#SPJ11

The proper reaction formula is CaO (s) + H₂O (l) Ca(OH)₂ (aq). G = Go + RT ln KcR can be used to compute the value of G. By heating calcium oxide (lime) with carbon (charcoal), calcium carbide (CaC₂) can be produced.

CaO(s) plus 3C(s) plus CaC₂(s) plus CO₂(g) = +464.8 kJ. The higher a substance's energetic stability, the lower its heat of production. The heat of formation for ethanol in the given example is -277.6 kJ/mol, the lowest value of any substance in the table.The pollutant sulphur trioxide and calcium oxide react to form calcium oxide (CaO(s) + SO₃(g) CaSO₄(s); G° = -345 kJ/mol),

To know more about calcium carbide, click here:

https://brainly.com/question/1581618

#SPJ4

The principle that allows the enthalpy of a reaction to be determined indirectly from several steps is called Hess' law.

Hess's law is a principle in thermodynamics that states that the enthalpy change of a chemical reaction is independent of the pathway between the initial and final states. This means that the total enthalpy change of a reaction can be calculated by adding the enthalpy changes of a series of intermediate reactions that connect the initial and final states, even if these intermediate reactions are not the actual steps of the reaction. Hess's law is based on the fact that enthalpy is a state function, which means that its value depends only on the initial and final states of a system, and not on the process by which the system reached those states. By using a series of intermediate reactions, it is possible to construct a path between the initial and final states that is easier to measure experimentally, and from which the enthalpy change of the overall reaction can be calculated indirectly.

Learn more about enthalpy :

https://brainly.com/question/16720480

#SPJ11

Diatomic oxygen (O₂) is more likely to appear than carbon dioxide (CO₂) or carbon monoxide (CO).

This is because diatomic oxygen is a highly abundant molecule in Earth's atmosphere, making up about 21% of the air we breathe. In contrast, carbon dioxide and carbon monoxide are present in much lower concentrations, with carbon dioxide making up only about 0.04% of the atmosphere and carbon monoxide being present in trace amounts.

Additionally, diatomic oxygen is involved in many important biological and chemical processes, such as respiration and combustion, which further increases its likelihood of appearing. Carbon dioxide and carbon monoxide, on the other hand, are mostly produced as byproducts of certain chemical reactions or as a result of human activities such as burning fossil fuels or deforestation.

To know more about the Carbon monoxide, here

https://brainly.com/question/22530423

#SPJ4

The total number of resonance forms of the cyclopentadienide anion, [tex]C_5H_5^{-1}[/tex], is: d. Five. The cyclopentadienide anion has a five-membered carbon ring with one double bond between each pair of adjacent carbon atoms and one negative charge (anion).

The cyclo-penta-dienide anion [tex]C_5H_5^{-1}[/tex] has five resonance forms due to the delocalization of electrons among the five carbon atoms in the ring. This results in the formation of four equivalent carbon-carbon double bonds, which contribute to the stability of the anion. The resonance structures are formed by shifting the electrons around the ring, resulting in different arrangements of double bonds.
In resonance structures, the position of double bonds and negative charge can change while maintaining the overall structure. In the case of cyclopentadienide anion, there are five possible resonance forms, each with the double bonds and negative charge shifted by one position around the ring.

To learn more about resonance click here https://brainly.com/question/9790241

#SPJ11

The structures of the two possible dipeptides that can be formed by combining valine and phenylalanine is attached.

Structure is the arrangement and organization of elements within a system. It can refer to the physical arrangement of components, the hierarchical ordering of tasks, the way information is organized, or the pattern of relationships between different parts. Structures are essential components of all systems, whether physical, biological, or social. They provide a way to define the order and manner of how a system works, and how it interacts with the environment. Structures also can serve to facilitate communication between different parts of a system and can be used to identify potential areas for improvement. Structure is a key concept in the fields of engineering, architecture, and computer science.

To learn more about structure
https://brainly.com/question/20300458
#SPJ1

If the Kb of a weak base is 4.4×10^(-6) and the ph of a 0.39 m solution of this base is approximately 10.61.

to find the pH of a 0.39 M solution of this base, follow these steps:

1. First, use the Kb expression: Kb = [OH^(-)][BH(+)] / [B]
2. Assume x moles of the base react to form OH^(-) and BH(+). So, [OH^(-)] = [BH(+)] = x, and [B] = 0.39 - x.
3. Substitute values into the Kb expression: 4.4×10^(-6) = x^2 / (0.39 - x)
4. Since Kb is very small, we can assume that x is much smaller than 0.39, so the equation becomes: 4.4×10^(-6) ≈ x^2 / 0.39
5. Solve for x: x = √(4.4×10^(-6) × 0.39) ≈ 4.09×10^(-4)
6. Calculate the pOH: pOH = -log10(x) = -log10(4.09×10^(-4)) ≈ 3.39
7. Calculate the pH: pH = 14 - pOH = 14 - 3.39 ≈ 10.61

The pH of a 0.39 M solution of this weak base with a Kb of 4.4×10^(-6) is approximately 10.61.

Learn more about Kb of a weak base at  brainly.com/question/14980991

#SPJ11

The enthalpy change, ΔH°, for the reaction 2SO2(g) + O2(g) → 2SO3(g) is -1386 kJ/mol.

To calculate the ΔH° for the reaction 2SO2(g) + O2(g) → 2SO3(g), we need to use Hess's Law which states that the enthalpy change of a reaction is independent of the pathway between the reactants and the products. Therefore, we can add the enthalpies of the two reactions below to obtain the ΔH° for the desired reaction:

2SO2(g) + O2(g) → 2SO3(g)
= 2[ S(s) + O2(g) → SO2(g) ] + [ 2S(s) + 3O2(g) → 2SO3(g) ]
= 2[-297 kJ/mol] + [-792 kJ/mol]
= -1386 kJ/mol

To know more about Enthalpy change:

https://brainly.com/question/19248192

#SPJ11

The formula for a compound formed by the ions M-1 and X+3 is MX3.

The formula of a compound formed by the ions M-1 and X+3 can be determined using the crisscross method. This method involves taking the absolute value of the charge of each ion and using it as a subscript for the other ion. In this case, the absolute value of the charge of M-1 is 1 and the absolute value of the charge of X+3 is 3. Thus, the formula for the compound would be M1X3 or simply MX3. It is important to note that the other options provided in the question, such as M3X, M3X3, and MX6, are not correct based on the charges of the ions given. It is essential to use the crisscross method to determine the correct formula of a compound formed by ions with different charges.

Know more about Charge here:

https://brainly.com/question/17464878

#SPJ11

The total number of atoms present in 400 grams of Na₂SO₄ is 1.60 x 10²⁵ atoms.

To find this, first, determine the number of moles in 400 grams of Na₂SO₄:

1. Calculate the molar mass of Na₂SO₄: (2 x 22.99) + 32.07 + (4 x 16.00) = 142.04 g/mol
2. Convert grams to moles: 400 g / 142.04 g/mol ≈ 2.817 moles

Next, determine the number of formula units in 2.817 moles of Na₂SO₄:

3. Use Avogadro's number (6.022 x 10²³ formula units/mol): 2.817 moles x 6.022 x 10²³ formula units/mol ≈ 1.696 x 10²⁴ formula units

Finally, find the total number of atoms in 1.696 x 10²⁴ formula units of Na₂SO₄:

4. In each formula unit, there are 2 Na atoms, 1 S atom, and 4 O atoms (total of 7 atoms)

5. Multiply the number of formula units by the number of atoms per formula unit: 1.696 x 10²⁴ formula units x 7 atoms/formula unit ≈ 1.60 x 10²⁵ atoms

To know more about Avogadro's number click on below link:

https://brainly.com/question/28812626#

#SPJ11

The entropy change when 1.67 moles of liquid [tex]C_6H_6[/tex] vaporizes at 80 °C, 1 atm is approximately 145.18 J/K.

To find the entropy change when 1.67 moles of liquid benzene ([tex]C_6H_6[/tex]) vaporizes at 80°C (353.15 K) and 1 atm, you need to use the following formula:
ΔS = (ΔHvap / T) * n
Where:
ΔS is the entropy change
ΔHvap is the heat of vaporization (30.7 kJ/mol)
T is the temperature in Kelvin (353.15 K)
n is the number of moles (1.67 moles)

Step 1: Convert the heat of vaporization from kJ/mol to J/mol: 30.7 kJ/mol * 1000 J/kJ = 30700 J/mol

Step 2: Calculate the entropy change using the formula: ΔS = (30700 J/mol / 353.15 K) * 1.67 moles

Step 3: Calculate the result: ΔS = (86.94 J/mol*K) * 1.67 moles

Step 4: ΔS = 145.18 J/K

To know more about "Entropy" refer here:

https://brainly.com/question/28082783#

#SPJ11