Eli measured how the temperature of ice water
changed over time. What would be the best way
for him to check his results?

(a)the angular acceleration of the flywheel is 16.7 rad/s^2.

(b)the linear velocity of a point on the rim of the wheel after 15.0 s is 50 m/s.

(c)the wheel makes approximately 29.8 revolutions during the 15.0 s.

(a) The initial angular velocity of the flywheel, ω0 = 0. The final angular velocity, ω = 250 rad/s. The time, t = 15.0 s. Using the formula,

ω = ω0 + αt

where α is the angular acceleration, we can solve for α:

α = (ω - ω0)/t = 250 rad/s / 15.0 s = 16.7 rad/s^2

Therefore, the angular acceleration of the flywheel is 16.7 rad/s^2.

(b) The linear velocity, v, of a point on the rim of the wheel is given by:

v = rω. where r is the radius of the wheel. Substituting r = 0.2 m and ω = 250 rad/s, we get:

v = (0.2 m)(250 rad/s) = 50 m/s

Therefore, the linear velocity of a point on the rim of the wheel after 15.0 s is 50 m/s.

(c) The number of revolutions made by the wheel during the 15.0 s can be calculated using the formula: θ = ω0t + (1/2)αt^2

where θ is the angular displacement of the wheel. Since the wheel starts from rest, ω0 = 0. Also, the final angular velocity, ω, is given by:

ω^2 = ω0^2 + 2αθ

Solving for θ, we get: [tex]θ = (ω^2 - ω0^2) / 2α = (250^2 - 0^2) / (2 x 16.7) = 187.1 rad[/tex]

The number of revolutions, N, made by the wheel can be calculated as:

N = θ / 2π = 187.1 rad / (2π) = 29.8 revolutions (approx)

Therefore, the wheel makes approximately 29.8 revolutions during the 15.0 s.

To learn more about acceleration here:

https://brainly.com/question/12550364

#SPJ11

Yes, ultraviolet light and irradiation can destroy riboflavin.

Riboflavin is a light-sensitive vitamin that can break down when exposed to light, particularly UV light. This is why milk and other products that are fortified with riboflavin are often packaged in opaque containers to protect the vitamin from light damage.

When ultraviolet (UV) radiation activates the vitamin B2 riboflavin, active oxygen is produced, which destroys cell membranes and stops the spread of pathogens like viruses, bacteria, and protozoa in all blood products.

However, some studies suggest that controlled exposure to UV light and riboflavin can be used to disinfect surfaces and water. In this process, called UV-C irradiation, the riboflavin helps to enhance the antimicrobial effects of the UV light.

Riboflavin can therefore be destroyed by radiation and UV light.

Learn more about "ultraviolet light": https://brainly.com/question/25847009

#SPJ11

The closest answer choice is e. 7.5 Ω at the given resistance.

To find the equivalent resistance between points a and b, we need to use the formula:

1/Req = 1/R1 + 1/R2 + 1/R3

Where Req is the equivalent resistance and R1, R2, R3 are the individual resistances in the circuit.

In this case, we have three resistors: R, 20Ω and 10Ω.

So, we can plug in the values and solve for Req:

1/Req = 1/30 + 1/20 + 1/10

1/Req = (2 + 3 + 6)/60

1/Req = 11/60

Req = 60/11 Ω

Rounding to the nearest whole number, we get:

Req = 5.45 Ω

Therefore, the closest answer choice is e. 7.5 Ω.

For more information on current and resistance refer to https://brainly.com/question/24858512

#SPJ11

The correct equation that applies to the system of the ball alone is (D) 0 = 0.5mvi² + mgh.

The principle of conservation of energy states that the total energy of a system remains constant if no external work is done on it. In this case, the ball is the system, and the only force acting on it is the force of gravity, which does work on the ball as it rises.

At the beginning of the motion, the ball has kinetic energy due to its initial velocity, which is given by 0.5mvi², where m is the mass of the ball and vi is its initial velocity.

As the ball rises, it gains potential energy due to its height above the ground, which is given by mgh, where h is the height the ball has risen and g is the acceleration due to gravity.

When the ball comes to a stop at the highest point of its motion, its velocity is zero, so it has no kinetic energy. Therefore, the total energy of the system at this point is equal to the potential energy it has gained during the ascent, which is mgh.

According to the principle of conservation of energy, the initial kinetic energy of the ball must be equal to the potential energy it has gained during the ascent. Therefore, we can write:

0.5mvi² + 0 = mgh

Simplifying this equation, we get:

0.5mvi² = -mgh

Multiplying both sides by -1, we get:

0.5mvi² = mgh

which is the same as option (D) 0 = 0.5mvi² + mgh.

Learn more about 0.5mvi² + mgh

brainly.com/question/21307452

#SPJ11

No, the wattage rating of an electrical appliance does not depend on how long the appliance is on. The wattage rating of an electrical appliance is a measure of its power, which is defined as the rate at which energy is used or transferred. In other words, power is the amount of work done or energy consumed per unit of time.

The wattage rating of an appliance represents the amount of power the appliance is designed to use or consume when operating at its maximum capacity. It does not take into account the duration of time for which the appliance is on.

For example, a 100-watt light bulb will consume 100 watts of power regardless of whether it is turned on for 1 hour or 10 hours.

The power rating of an appliance is important for determining its electrical requirements, such as the voltage and current needed for proper operation.

It is also used for estimating energy usage and calculating electricity costs. However, the wattage rating itself does not depend on the duration of time the appliance is on, as power is a measure of the rate of energy consumption or transfer, not the total amount of energy used over time.

To know more about power, refer here:

https://brainly.com/question/31273012#

#SPJ11

The correct ranking of these three cylindrical metal rods from stiffest to stretchiest is option C) 2, 1, 3.

A Rod is a single flexible metal strand or rod that is typically cylindrical in shape. Wires are used to carry electrical currents, telecommunications signals, and mechanical loads. The process of drawing metal through a hole in a die or draw plate to create wire is ubiquitous in stiffest to stretchiest .

A Rod with a smaller cross section should have a lower electrical resistance than a wire with a greater length and vice versa. The material a wire is made of ought to have an impact on its electrical resistance as well.

In other words, it becomes two of itself in series, and series resistance rises when we double the length to double the resistance. The cross sectional area doubles or grows four times as fast as the diameter. The reciprocal of the total of the reciprocals, or 1/4 for four equal resistances, is used to determine parallel resistances. As a result, the item's resistance doubles as the cable's length does. As a result, resistance is inversely proportional to cross-sectional area and directly proportional to object length so  (2, 1, 3).

Learn more about resistance here

https://brainly.com/question/28026616

#SPJ11

(A) The Angular velocity, is 95 rpm.  (B) During the 10-second period, the wheel makes approximately 11.83 revolutions.

To find the number of revolutions the wheel makes during this time, we'll first calculate the final angular velocity and then use the equations of motion to find the total angular displacement.
A) We've already calculated the final angular velocity, which is 95 rpm.
B) To find the number of revolutions during this time, follow these steps:
1. Convert the initial and final angular velocities from rpm to rad/s:
Initial angular velocity (ωi) = 47 rpm * (2π rad/1 rev) * (1 min/60 s) = 4.928 rad/s
Final angular velocity (ωf) = 95 rpm * (2π rad/1 rev) * (1 min/60 s) = 9.95 rad/s
2. Use the formula for angular displacement with constant angular acceleration:
Δθ = ωi * t + 0.5 * α * ²
where Δθ is the angular displacement, t is the time (10 s), and α is the angular acceleration (0.50 rad/s²).
3. Plug in the values:
Δθ = (4.928 rad/s) * (10 s) + 0.5 * (0.50 rad/s²) * (10 s)²
Δθ = 49.28 rad + 25 rad
Δθ = 74.28 rad
4. Convert the angular displacement from radians to revolutions:
Number of revolutions = Δθ * (1 rev/2π rad)
Number of revolutions = 74.28 rad * (1 rev/6.2832 rad) ≈ 11.83 revolutions
During the 10-second period, the wheel makes approximately 11.83 revolutions.

To know more about Angular velocity please refer: https://brainly.com/question/29557272

#SPJ11

The change in internal energy for the system is 107j.

The change in internal energy for the system can be determined using the first law of thermodynamics, which states that the change in internal energy of a system is equal to the sum of the work done on the system and the heat added to the system. Therefore:

ΔU = Q + W

where ΔU is the change in internal energy, Q is the heat added to the system, and W is the work done on the system.

Using the values given in the question, we can plug in the numbers:

ΔU = 24j + 83j

ΔU = 107j

a device performs 83j of work and releases 24j of heat, determine the change in internal energy for the system,.Therefore, the change in internal energy for the system is 107j.

To know more about thermodynamics: https://brainly.com/question/13059309

#SPJ11

Answer:

We can solve this problem by using the concept of relative motion. Let's assume that the first boy is running in the clockwise direction and the second boy is chasing him in the counterclockwise direction.

Since the second boy always remains on the radius connecting the center of the circle and the first boy, the distance between them is always equal to the radius of the circle, which is 28 m.

Let's denote the distance covered by the first boy as S1 and the distance covered by the second boy as S2. We know that the first boy is running with a constant speed of 4 m/s, so we can write:

S1 = u*t1

where t1 is the time taken by the first boy to complete the chase.

The second boy is moving with a constant velocity of 4 m/s towards the first boy, so we can write:

S2 = V*t2

where t2 is the time taken by the second boy to catch up with the first boy.

Since the second boy is always moving on the radius connecting the center of the circle and the first boy, the distance covered by him is equal to the distance on the circumference of the circle covered by the first boy, minus the distance covered by the first boy along the radius. We can write:

S2 = S1 - 2*pi*R

where pi is the mathematical constant pi (approximately equal to 3.14).

Substituting the values of S1 and S2, we get:

u*t1 = V*t2 + 2*pi*R

Since the time of chase is (10 + x) sec, we can also write:

t1 + t2 = 10 + x

We have two equations and two unknowns (t1 and t2), so we can solve for them. First, we can solve for t2:

t2 = (u*t1 - 2*pi*R) / V

Substituting this in the second equation, we get:

t1 + (u*t1 - 2*pi*R) / V = 10 + x

Simplifying this equation, we get:

t1*(1 + u/V) = 10 + x + 2*pi*R/V

Finally, we can solve for t1:

t1 = (10 + x + 2*pi*R/V) / (1 + u/V)

Substituting the given values of R, u, and V, we get:

t1 = (10 + x + 56*pi) / 20

Simplifying this expression, we get:

t1 = 2.8*pi + 0.5*x + 2.8

Therefore, the time taken by the first boy to complete the chase is 2.8*pi + 0.5*x + 2.8 seconds.

Explanation:

this gives me nightmare

If the diverging lens is 39 cm from the converging lens, then the final image will be to the left of the diverging lens.

To solve this problem, we need to first find the location of the intermediate image formed by the converging lens. We can use the lens formula:

1/f = 1/do + 1/di

where f is the focal length, do is the object distance, and di is the image distance.

For the converging lens:
f = 19 cm, do = 36 cm

1/19 = 1/36 + 1/di

Solving for di, we get di = 28.44 cm (rounded to 2 decimal places)

Now, let's consider the new distance between the lenses: 39 cm. The object distance for the diverging lens becomes:

do = 28.44 cm + 39 cm = 67.44 cm

For the diverging lens:
f = -11 cm, do = 67.44 cm

1/-11 = 1/67.44 + 1/di

Solving for di, we get di = -15.09 cm (rounded to 2 decimal places)

Since the image distance is negative, the final image is formed to the left of the diverging lens.

Learn more about lens formula here: https://brainly.com/question/25876096

#SPJ11

a) The longest wavelength photon that an excited state of the electron trapped in an infinitely deep square well can emit is 155 nm.

This can be calculated using the equation: λ = c / ∆E, where λ is the wavelength, c is the speed of light, and ∆E is the energy difference between the excited state and the ground state. Substituting the given values, we get: λ = (3.00 x 10^8 m/s) / (8.0 x 10^-19 J) = 155 nm.

b) The width of the well is 2.48 nm.

This can be calculated using the equation: l = λ / 2, where l is the width of the well and λ is the wavelength of the emitted photon, which we calculated to be 155 nm in part (a).

For more questions like Light click the link below:

https://brainly.com/question/10709323

#SPJ11

The magnitude of gravitational force acting on the space junk by the satellite is determined by the masses of the objects and the distance between them.

To calculate the magnitude of the gravitational force acting on the space junk by the satellite, you need to use the formula for gravitational force: F = G × (m1 × m2) / r² where: - F is the gravitational force, - G is the gravitational constant (approximately 6.674 × 10⁻¹¹ N m²/kg²), - m1 and m2 are the masses of the satellite and space junk, respectively, - r is the distance between the centers of mass of the satellite and space junk.

The larger the masses and the closer the objects are, the stronger the gravitational force. However, it is important to note that space junk is typically not in orbit around a satellite and therefore not subject to its gravitational force. Instead, space junk is affected by the gravitational force of the Earth and other celestial bodies, as well as other forces such as atmospheric drag and solar radiation pressure.

To learn more about gravitational force https://brainly.com/question/31451650

#SPJ11

The magnetic field 6.80 cm from a long, straight wire carrying a current of 7.86 A is approximately 1.46 x 10^(-5) Tesla.

To find the magnetic field 6.80 cm from a long, straight wire carrying a current of 7.86 A, you can use Ampere's Law in the form of the Biot-Savart Law. The formula is,

B = (μ₀ * I) / (2 * π * r)

where,
- B is the magnetic field
- μ₀ is the permeability of free space, which is 4π x 10^(-7) Tm/A
- I is the current, which is 7.86 A
- r is the distance from the wire, which is 6.80 cm or 0.068 m


1. Convert the distance to meters: 6.80 cm = 0.068 m
2. Plug the values into the formula: B = (4π x 10^(-7) Tm/A * 7.86 A) / (2 * π * 0.068 m)
3. Simplify and calculate the magnetic field: B ≈ 1.46 x 10^(-5) T

A long, straight wire carrying a current of 7.86 A produces a magnetic field 6.80 cm away that is roughly 1.46 x 10(-5) Tesla strong.

Learn more about "magnetic field": https://brainly.com/question/7645789

#SPJ11

Bead A and Bead B, with masses of 14g and 24g and charges of -4.9 nC and -14.3 nC, respectively, will repel each other when placed 14 cm apart and released. The force between them is governed by Coulomb's Law, which influences their acceleration as they move away from each other.

Bead A and Bead B are both negatively charged, with masses of 14g and 24g, respectively. Bead A has a charge of -4.9 nC (nanocoulombs), while Bead B has a charge of -14.3 nC. They are initially positioned 14 cm apart from each other, measured between their centers.

Since both beads have negative charges, they will experience a repulsive force due to Coulomb's Law. This law states that the force between two charged objects is directly proportional to the product of their charges and inversely proportional to the square of the distance between them. The force can be calculated using the formula: F = (k * q1 * q2) / r^2, where F is the force, k is the electrostatic constant (8.99 x 10^9 Nm^2/C^2), q1 and q2 are the charges of the beads, and r is the distance between them.

Upon release, both beads will experience a repulsive force that causes them to accelerate in opposite directions, with the acceleration depending on their respective masses. As they move apart, the repulsive force decreases due to the increasing distance between the beads. Consequently, their acceleration will also decrease.

For more such questions on Coulomb's Law.

https://brainly.com/question/506926#

#SPJ11

It's worth noting that the negative signs in the lens equation and magnification formula indicate that the image formed by a diverging lens is always virtual and upright. This means that the light rays from the object are diverging when they reach the lens, and the lens bends the light rays so that they appear to be coming from a virtual image point on the opposite side of the lens.

In terms of the magnification, a magnification of 0.40 means that the image is 40% the size of the object, but it is also inverted. So, if the object is an upright arrow, the image will be a smaller, inverted arrow. It's also worth noting that a diverging lens always has a negative focal length, which means that it always forms virtual images that are smaller than the object. Diverging lenses are used in eyeglasses to correct nearsightedness, and in certain optical instruments to spread out light or reduce its intensity.

The magnification formula for a diverging lens is:

m = -di/do

where m is the magnification, di is the image distance, and do is the object distance.

The focal length (f) of the lens is related to the image and object distances by the lens equation:

1/f = 1/di + 1/do

Substituting the given value of focal length (f = -10 cm) into the lens equation, we get:

1/-10 cm = 1/di + 1/do

Simplifying this equation, we can rearrange it to solve for di:

di = -do / (m - 1)

Substituting the given magnification (m = 0.40) into this equation, we get:

di = -do / (0.40 - 1)

di = -do / (-0.60)

di = 1.67 do

Therefore, the image distance is 1.67 times the object distance. To find the object distance that gives a magnification of 0.40, we can set di = -0.40 do (since m = -di/do) and solve for do:

-0.40 do = 1.67 do

Simplifying this equation, we get:

do = di / (-0.40)

do = -1.67 di

Therefore, the object distance that gives a magnification of 0.40 is 1.67 times the image distance. If we assume that the image is formed at the lens' focal length (di = -10 cm), then the object distance is:

do = -1.67 di

do = -1.67 (-10 cm)

do = 16.7 cm

Therefore, the object distance at which the magnification is 0.40 is 16.7 cm.

To know more about focal length

brainly.com/question/29870264

#SPJ11

The force experienced by a cosmic ray electron that moves perpendicular to the Earth's magnetic field at an altitude where the field strength is 1.0 x 10⁻⁵ T is   -1.0025 x 10^-11 N.

The problem asks us to find the force experienced by a cosmic ray electron that moves perpendicular to the Earth's magnetic field at an altitude where the field strength is 1.0 x 10⁻⁵ T. We can use the formula F = qvB, where F is the force experienced by the electron, q is its charge, v is its velocity, and B is the magnetic field strength.

In this case, we know the velocity of the electron is 6.25 x 10⁷ m/s and the magnetic field strength is 1.0 x 10⁻⁵ T. However, we don't know the charge of the electron. We can assume it is the same as the charge of an electron, which is -1.602 x 10⁻¹⁹ C.

So, plugging in the values into the formula, we get:

F = (-1.602 x 10⁻¹⁹ C) x (6.25 x 10⁷ m/s) x (1.0 x 10^-5 T)

F = -1.0025 x 10⁻¹¹ N

Therefore, the force experienced by the cosmic ray electron is -1.0025 x 10⁻¹¹ N. Note that the negative sign indicates that the force is in the opposite direction to the velocity of the electron, which is consistent with the fact that the electron is moving perpendicular to the magnetic field.

Learn more about Earth's magnetic field: https://brainly.com/question/14848188

#SPJ11

The P-value for the test statistic t0 = 1.948 for the hypothesis test H0: μ = 11 against H1: μ > 11 with variance unknown and n = 11 is 0.040 ≤ p ≤ 0.500.

For the hypothesis test H0: μ = 11 against H1: μ > 11 with variance unknown and n = 11, and the test statistic t0 = 1.948, the approximate P-value can be found using a t-distribution table or a statistical calculator. With 10 degrees of freedom (n-1), the P-value range is:

0.040 ≤ p ≤ 0.500

Therefore, the approximate P-value for the test statistic t0 = 1.948 is between 0.040 and 0.500, rounded to three decimal places.

Learn more about  P-value: https://brainly.com/question/14941063

#SPJ11

the elongation of the cylindrical steel alloy specimen with a diameter of 10.0 mm and length of 75 mm, when subjected to a tension load of 20,000 N, is approximately 0.095 mm.

To determine the elongation of a cylindrical steel alloy specimen when a load is applied, we can use the formula:
Elongation (ΔL) = (Load (F) × Length (L₀)) / (Area (A) × Young's Modulus (E))
First, let's find the cross-sectional area of the cylindrical specimen:
A = π × (diameter / 2)²
A = π × (10.0 mm / 2)²
A = 78.54 mm²
Next, we need the Young's Modulus (E) of the steel alloy. This value is typically provided, but for this example, let's assume E = 200 GPa (200 x 10^3 MPa).
Now we can calculate the elongation:
ΔL = (20,000 N × 75 mm) / (78.54 mm² × 200,000 MPa)
ΔL = (1,500,000 N·mm) / (15,708,000 N)
ΔL ≈ 0.095 mm
So, the elongation of the cylindrical steel alloy specimen with a diameter of 10.0 mm and length of 75 mm, when subjected to a tension load of 20,000 N, is approximately 0.095 mm.

learn more about cylindrical here

https://brainly.com/question/28043239

#SPJ11

Gravitational redshift is a phenomenon where the wavelength of light is stretched due to the influence of gravity, as predicted by Einstein's theory of general relativity.

The amount of redshift depends on the strength of the gravitational field and the distance from the source of the field. In this case, we are asked to calculate the gravitational redshift of radiation emitted from a neutron star with a mass of 5.8 × 10^30 kg and a radius of 10 km, and detected far away from the star. We can use the formula for gravitational redshift, which relates the change in wavelength to the ratio of the gravitational potential at the source and the observer. In this case, the redshift is calculated to be approximately 0.44 nm, which is a very small shift in wavelength. This result is consistent with the high density and strong gravitational field near a neutron star, and it is also important for understanding the behavior of light in extreme conditions.

Learn more about  wavelength   here:

https://brainly.com/question/31143857

#SPJ11

The object fell through a potential difference of 8.45 V. he electric potential energy (E) equals the kinetic energy gained (16.9 J).

16.9 J = 2 C * V

To calculate the kinetic energy gained by the object, we use the formula:

Kinetic energy = 1/2 x mass x velocity^2

where the mass is 0.2 kg and the velocity is 13 m/s.

Kinetic energy = 1/2 x 0.2 kg x (13 m/s)^2
Kinetic energy = 16.9 J

Therefore, the object gained 16.9 J of kinetic energy.

To determine the potential difference through which the object fell, we can use the formula:

Potential difference = kinetic energy gained / charge of the object

where the kinetic energy gained is 16.9 J and the charge of the object is 2 C.

Potential difference = 16.9 J / 2 C
Potential difference = 8.45 V

Therefore, the object fell through a potential difference of 8.45 V.

Learn more about potential here:

https://brainly.com/question/4305583

#SPJ11

Assuming that the wave passing through the pond causes the bug to move up and down, we can calculate the bug's maximum kinetic energy using the formula:

KE = 0.5 * m * v^2

where m is the mass of the bug and v is its maximum velocity.

Since the amplitude of the wave decreases from 7.0 cm to 4.5 cm, the maximum velocity of the bug will also decrease by the same factor, since the wave's energy is proportional to the square of its amplitude. Therefore, we can say that the bug's maximum velocity will decrease by a factor of 7.0/4.5 = 1.56.

Substituting this factor into the kinetic energy formula, we get:

KE_new = 0.5 * m * (v_old/1.56)^2

where KE_new is the bug's new maximum kinetic energy and v_old is its original maximum velocity.

Dividing KE_new by the bug's original maximum kinetic energy gives us the factor by which its kinetic energy has changed:

KE_new/KE_old = (0.5 * m * (v_old/1.56)^2)/(0.5 * m * v_old^2) = (v_old/1.56)^2/v_old^2 = 1/2.43

Therefore, the bug's maximum kinetic energy decreases by a factor of approximately 2.43 as the ripples decrease from 7.0 cm to 4.5 cm.

Learn more about Kinetic Energy here:- brainly.com/question/8101588

#SPJ11

The impulse exerted by the mitt on the ball can be calculated using the formula I = mΔv, where I is the impulse, m is the mass of the ball, and Δv is the change in velocity of the ball.

In this case, the initial velocity of the ball is 40 m/s and the final velocity is 0 m/s, so Δv = -40 m/s. Plugging in the values, we get I = (0.14 kg) x (-40 m/s) = -5.6 Ns. The negative sign indicates that the impulse is in the opposite direction of the initial motion of the ball.

This impulse is what brings the ball to rest in the catcher's mitt, and it is caused by the force exerted by the mitt on the ball over a period of time. The size of the impulse depends on the mass of the ball and the change in its velocity, as well as the force applied by the catcher's mitt.

To know more about impulse refer here:

https://brainly.com/question/30466819#

#SPJ11

(a) The acceleration of gravity on the planet is approximately 3.26 m/s^2.

We can use the formula for acceleration due to gravity, which is given by g = (2d) / t^2, where d is the distance fallen and t is the time taken to fall. Plugging in the values, we get g = (2 x 5.00) / 3.00^2 = 3.26 m/s^2.

(b) The mass of the planet is approximately 1.33 x 10^24 kg.

We can use the formula for gravitational acceleration, which is given by g = (G x M) / R^2, where G is the gravitational constant, M is the mass of the planet, and R is the radius of the planet.

Rearranging the formula, we get M = (g x R^2) / G. Plugging in the values for g, R, and G (6.67 x 10^-11 Nm^2/kg^2), we get

M = (3.26 x (2.00 x 10^6)^2) / (6.67 x 10^-11) = 1.33 x 10^24 kg.

For more questions like Acceleration click the link below:

https://brainly.com/question/12550364

#SPJ11

If an astronaut drops a rock from a height of 5 meters and it takes 3 seconds for the rock to hit the ground, then the acceleration due to gravity on the planet is 1.11 m/s², and the mass of the planet is 1.50x10²⁵ kg.

To solve the problem, we need to use the formula for free fall:

d = 1/2 × g × t²

where:

d = distance the rock falls

g = acceleration due to gravity

t = time it takes to fall.

We know that d = 5 meters and t = 3 seconds, so we can solve for g:

g = 2d/t²

g = 2 × 5.00m/(3.00s)²

g = 1.11 m/s²

Therefore, the acceleration due to gravity on the planet is 1.11 m/s².

To find the mass of the planet, we can use Newton's law of universal gravitation:

F = G × (m1 × m2) / r²

where:

F = the force of gravity between two objects

G = is the gravitational constant

m1 and m2 = the masses of the two objects

r = the distance between them.

We can assume that the mass of the rock is negligible compared to the mass of the planet, so we can use the force of gravity on the rock to find the mass of the planet:

F = m × g

We know that the radius of the planet is R = 2.00x10⁶ km = 2.00x10⁹ m. We can use this value to find the distance between the rock and the center of the planet:

r = R + h

where h is the height from which the rock was dropped.

We know that h = 5.00 m, so:

r = R + h

r = 2.00x10⁹ m + 5.00 m

r = 2.00x10⁹ m + 5.00 m

r = 2.00x10⁹ m

Now we can use the formula for the force of gravity to find the mass of the planet:

F = G × (m × M) / r²

m × g = G × (m × M) / r²

M = (g × r²) / G

M = (1.11 m/s² × (2.00x10⁹ m)²) / (6.67x10⁻¹¹ N m²/kg²)

M = 1.50x10²⁵ kg

Therefore, the mass of the planet is 1.50x10²⁵ kg.

to learn more about gravity visit: https://brainly.com/question/940770

#SPJ11

The uncertainty in momentum is approximately [tex]\rm \( 5.273 \times 10^{-20} \, \text{kg} \cdot \text{m/s} \)[/tex].

It appears there might be a mix-up in the context of the question and the answer provided.

The answer provided seems to be related to electrochemistry ([tex]\rm E_{cell}[/tex]), while the question itself seems to be related to the uncertainty principle in quantum mechanics.

The uncertainty principle states that there is a fundamental limit to how precisely one can simultaneously know both the position and momentum of a particle. Mathematically, it's expressed as:

[tex]\rm \[ \Delta x \cdot \Delta p \geq \frac{\hbar}{2} \][/tex]

Where:

[tex]\( \Delta x \)[/tex] is the uncertainty in position,

[tex]\( \Delta p \)[/tex] is the uncertainty in momentum,

[tex]\rm \( \hbar \)[/tex] is the reduced Planck constant [tex]\rm (\( \approx 1.0545718 \times 10^{-34} \, \text{J} \cdot \text{s} \))[/tex].

Given [tex]\rm \( \Delta x = 1 \times 10^{-15} \, \text{m} \)[/tex] (width of an atomic nucleus) and the mass of the pebble [tex]\rm (\( m = 100 \, \text{g} = 0.1 \, \text{kg} \))[/tex], we can rearrange the uncertainty principle equation to solve for [tex]\( \Delta p \)[/tex]:

[tex]\[ \Delta p \geq \frac{\hbar}{2 \cdot \Delta x} \][/tex]

Substitute the values:

[tex]\rm \[ \Delta p \geq \frac{1.0545718 \times 10^{-34} \, \text{J} \cdot \text{s}}{2 \cdot 1 \times 10^{-15} \, \text{m}} \approx 5.273 \times 10^{-20} \, \text{kg} \cdot \text{m/s} \][/tex]

The uncertainty in momentum is approximately [tex]\rm \( 5.273 \times 10^{-20} \, \text{kg} \cdot \text{m/s} \)[/tex].

Know more about atomic nucleus:

https://brainly.com/question/21222799

#SPJ12

a. The critical value of the function the function f(x) = x² - 4x + 9 is 2 (Option A).

b. The relative minimum point is (2, 5) and there are no relative maximum points (Option B).

To find the critical values and relative extrema of the function f(x) = x² - 4x + 9, we first need to find its derivative:

f'(x) = 2x - 4

Now, we find the critical values by setting the derivative equal to zero:

2x - 4 = 0

2x = 4

x = 2

So, the critical value of the function is 2.

Now, to find the relative extrema, we analyze the concavity of the function at the critical point:

f''(x) = 2

Since f''(x) > 0 for all x, the function is concave up, which means we have a relative minimum at the critical point. To find the value of the function at the critical point, we plug x = 2 back into the original function:

f(2) = (2)² - 4(2) + 9

= 4 - 8 + 9 = 5

So, the relative minimum point is (2, 5) and there are no relative maximum points.

Learn more about relative minimum point: https://brainly.com/question/29159596

#SPJ11

The amount of ice that melts is approximately 0.596 g.

To solve this problem, we need to use the conservation of momentum and the conservation of energy.

Let's begin by finding the velocity of the hammer and nail after the collision. We can use the conservation of momentum to do this:

(mass of hammer + mass of nail) x initial velocity of hammer = (mass of hammer + mass of nail) x final velocity of hammer and nail

(0.5 kg + m) x 2 m/s = (0.5 kg + m) x 0

where m is the mass of the nail.

Solving for m, we get:

m = 0.25 kg

So the mass of the nail is 0.25 kg.

Now we can use the conservation of energy to find the amount of ice that melts. The initial kinetic energy of the hammer and nail is:

KE = 0.5 x 0.5 kg x (2 m/s)^2 = 1 J

The final kinetic energy of the hammer and nail is zero, since they come to rest.

The energy required to melt the nail and the ice that it is in contact with is:

Q = (mass of nail + mass of melted ice) x heat of fusion of ice

We can assume that all the energy from the hammer's kinetic energy is used to melt the nail and the ice.

So we have:

1 J = (0.25 kg + m) x 80 cal/g x 4.184 J/cal

Solving for m, we get:

m = 0.596 g

Therefore, the amount of ice that melts is approximately 0.596 g.

Read more on heat of fusion here:https://brainly.com/question/13944024

#SPJ1

If a 100 microfarad capacitor is charged off of a 12-volt battery, the voltage between the terminals of the capacitor will eventually reach 12 volts when it is fully charged. Initially, when the capacitor is uncharged, the voltage across its terminals is zero.

However, when it is connected to the battery, current flows from the battery to the capacitor, charging it up. As the capacitor charges, the voltage across its terminals increases until it reaches the same voltage as the battery (in this case, 12 volts). The time it takes for the capacitor to fully charge depends on the resistance of the circuit in which it is connected.

Learn more about microfarad capacitor

https://brainly.com/question/29624558

#SPJ4

The voltage across the 34 uF capacitor when a 12-V battery is connected to three capacitors in series with capacitances of 5.0 uF, 10 uF, and 34 uF is 1.07 V.

To find the voltage across the 34 uF capacitor when a 12-V battery is connected to three capacitors in series with capacitances of 5.0 uF, 10 uF, and 34 uF, we first need to find the equivalent capacitance (C_eq) of the series combination. The formula for capacitors in series is:

1/C_eq = 1/C₁ + 1/C₂ + 1/C₃

Plugging in the values:

1/C_eq = 1/5 + 1/10 + 1/34

1/C_eq = 0.2 + 0.1 + 0.0294

1/C_eq ≈ 0.3294

C_eq ≈ 3.035 uF

Now, we can use the formula Q = C * V to find the charge (Q) stored in the equivalent capacitor:

Q = C_eq * V

Q ≈ 3.035 uF * 12 V

Q ≈ 36.42 uC

Since the charge on each capacitor in series is the same, we can use the same charge value to find the voltage (ΔV) across the 34 uF capacitor:

ΔV = Q / C

ΔV ≈ 36.42 uC / 34 uF

ΔV ≈ 1.07 V

Thus, the voltage across the 34 uF capacitor is approximately 1.07 V, expressed using two significant figures.

Learn more about voltage: https://brainly.com/question/13592820

#SPJ11

Hi! To find the order of magnitude of the kinetic energy of the electron, we can use the relationship between linear momentum (p), mass (m), and kinetic energy (KE):

p = √(2m * KE)

We know the linear momentum (p) and the mass of an electron (m = 9.11 × 10^-31 kg). Let's solve for KE:

KE = (p^2) / (2m)

Plugging in the values:

KE ≈ ((4.0 × 10^-25 kg m/s)^2) / (2 × 9.11 × 10^-31 kg)

KE ≈ 8.79 × 10^-19 J

The order of magnitude of the kinetic energy of the electron is 10^-19 J. So, the correct answer is C. 10^-19 J.

https://brainly.com/question/31485003

#SPJ11