Edhesive 4.3 code practice question 2

A web browser is used to gain access to the contents of a website, displaying the information in a readable and easily understandable format. Hence, an option which isn't a function of a web browser is Crawl through the World Wide Web searching for words and terms to index in Web Databases

Learn more : https://brainly.com/question/17130932

Answer:

he should look at the screen

Answer:

C. The screen

Explanation:

got it on edge

I'm no expert here, as I don't own a workstation but rather a gaming pc. But hey, I did tons of research on pc components and I think I can answer your question.

A dedicated workstation would be FAR more capable of running 3d applications, given how demanding they can get than a personal PC. You'd instantly regret using a typical pc for 3d rendering, even a top of the line gaming pc. Point is, gpus created by nvidia are far more capable of running graphic intensive programs specifically made for work than any other gpu. If you want to be satisfied, i'd advise you go for a workstation (Plus they're so much easier to get your hands on than a gaming rig).

Answer:

D. RAM is volatile, which means that it must be handheld with care when removed or replaced. A hard disk is not volatile, which means that it is much more resistant to movement during removal or replacement.

Explanation:

Most RAM (random access memory) used for primary storage in personal computers is volatile memory. Volatile memory contrasts with non-volatile memory, which does not lose content when power is lost. Non-volatile memory has a continuous source of power and does not need to have its memory content periodically refreshed.

Answer:

Explanation:

RAM can be accessed faster than hard drive. – Any changes made to the file will be present in RAM while once the changes are saved it is copied to the hard drive permanently. – RAM needs power to store data, hard drives do not.

Answer:

The answer is False.

Answer:

spyware

Explanation:

your welcome;)

Answer:

trojan horse

Explanation:

or just trojan

the process by which online predators lure in minors to get close enough to hurt them.

Answer:

no worries at all.

yeah-ya..... right?

Answer:

ICMP

Explanation:

R markdown notebook describes a notebook format in R programming which supports R programmers to run codes while also writing documents or explanation alongside. Hence, the missing option is Dashboard.

Hence, R markdown notebooks can be converted to HTML PDF, word document, slide presentation and dashboards.

Learn more :https://brainly.com/question/25575402

A notebook for R Markdown is required to document, discuss, and justify each stage of your investigation.

R markdown notebook presents a R programming notebook style that enables R programmers to run codes while simultaneously producing papers or explanations. A R Notebook, which is a document written in R Markdown, allows the software components to be run separately and in real-time. Additionally, it does away with the necessity of weaving all of your R Markdown text in order to test the results as you build your website.

Every R Notebook has the ability to be converted into any other R Markdown document type, and every R Markdown document has the ability to be used as a notebook. R Notebooks are thus a special operating option.

learn more about R Markdown here:

brainly.com/question/25575402

#SPJ4

Based on SQL analysis, the type of rules that specify user privileges to select, insert, update, and delete data for different tables and views is called DML.

DML is an acronym for Data Manipulation Language.

DML commands are typically applied to make all changes in the SQL database.

Hence, in this case, it is concluded that the correct answer is "DML (Data Manipulation Language)."

Learn more about SQL commands here: https://brainly.com/question/25694408

The program calculates the velocity between points in a list is written below. The program is written in python 3 thus ;

t = input("Enter time values : ")

#Enter the time values of the data

p = input("Enter distance values : ")

#Enter the distance values

dist = [float(x) for x in p.split()]

time = [float(x) for x in t.split()]

#pyt then values in a list

def partfthat(dist, time):

#initialize function that takes in two parameters

vel = []

#empty list to hold the calculated velocity values

i = 0

#indexer

while i <= len(dist)-2:

#while loop to iterate

v = (dist[i+1] - dist[i]) / (time[i+1] -time[i])

#Use the velocity formula

vel.append(v)

#append values to the empty list created

i+=1

return vel

print(avg_vel(dist, time))

A sample run of the program is attached.

Learn more : https://brainly.com/question/25681441

The notification area (also called the "system tray") is located in the Windows Taskbar, usually at the bottom right corner. It contains miniature icons for easy access to system functions such as antivirus settings, printer, modem, sound volume, battery status, and more.

Answer:

Answer: They are becoming obsolete and they are usually low-performance. Also a 32-bit system.

Would appreciate brainly <3

Answer:

Laptop computers are difficult to repair, upgrade or modify due to their closed and integrated design. While storage drives and RAM are usually accessible because these are the things you will most likely upgrade, it is often difficult to modify or replace your CPU, graphics chip or motherboard. These jobs will usually require professional equipment and tools–or a hired professional technician. Additionally, while in a desktop computer the possible configurations are almost unlimited, laptop configurations are limited to those provided by laptop manufacturers. Some software may also be incompatible with laptop hardware, and installations of different operating systems than those bundled with the laptop may result in hardware failures.

Answer:

CPU central processing unit

Communications is fundamental to the existence and survival of humans as well as to an organization. It is a process of creating and sharing ideas, information, views, facts, feelings, etc. among the people to reach a common understanding. Communication is the key to the Directing function of management.

A manager may be highly qualified and skilled but if he does not possess good communication skills, all his ability becomes irrelevant. A manager must communicate his directions effectively to the subordinates to get the work done from them properly.

Communications is a continuous process which mainly involves three elements viz. sender, message, and receiver. The elements involved in the communication process are explained below in detail:

1. Sender

The sender or the communicator generates the message and conveys it to the receiver. He is the source and the one who starts the communication

2. Message

It is the idea, information, view, fact, feeling, etc. that is generated by the sender and is then intended to be communicated further.

Browse more Topics under Directing

3. Encoding

The message generated by the sender is encoded symbolically such as in the form of words, pictures, gestures, etc. before it is being conveyed.

4. Media

It is the manner in which the encoded message is transmitted. The message may be transmitted orally or in writing. The medium of communication includes telephone, internet, post, fax, e-mail, etc. The choice of medium is decided by the sender.

5. Decoding

It is the process of converting the symbols encoded by the sender. After decoding the message is received by the receiver.

6. Receiver

He is the person who is last in the chain and for whom the message was sent by the sender. Once the receiver receives the message and understands it in proper perspective and acts according to the message, only then the purpose of communication is successful.

7. Feedback

Once the receiver confirms to the sender that he has received the message and understood it, the process of communication is complete.

8. Noise

It refers to any obstruction that is caused by the sender, message or receiver during the process of communication. For example, bad telephone connection, faulty encoding, faulty decoding, inattentive receiver, poor understanding of message due to prejudice or inappropriate gestures, etc.

Therefore, in order to run the program in the shortest time, you should delay for 3 years

Given that the speed of new computers costing a certain amount of money grows exponentially over time, with the speed doubling every 18 months.

Exponential equation as a function of time can be expressed as

P(t) = [tex]P_{0}[/tex][tex]R^{t/T}[/tex]

Quantity P will be increasing exponentially when R > 1. And it will decrease exponentially when R < 1.

Suppose you need to run a very time consuming program and are allowed to buy a new computer costing a fixed amount on which to run the program. If you start now, the program will take 7 years to finish.

Let the time required to run and complete a program for time t years be P(t).

If the speed doubling every 18 months, which is 3/2 years. This will eventually cause the running time to decrease by half (0.5)

P(t) = 7[tex](1/2)^{3t/2}[/tex] = 7[tex](2)^{-3t/2}[/tex]

The total time T will be sum of the delay time t and the time of running the program. That is

T(t) = t + P(t)

T(t) = t + 7[tex](2)^{-3t/2}[/tex]   .......... (2)

We can calculate the minimum time t by differentiating the above equation and make it equal to zero.

dT/dt = 1 + 14/3[tex](2)^{-3t/2}[/tex](ln0.5) = 0

14/3[tex](2)^{-3t/2}[/tex](ln0.5) = -1

[tex](2)^{-3t/2}[/tex](ln0.5) = -3/14

[tex](2)^{-3t/2}[/tex] = -3/14ln0.5

Log (natural logarithm) both sides

-3t/2ln2 = ln(3/14ln2)

make t the subject of formula

t = - 3ln(3/14ln2) ÷ 2ln2

t = 2.5 approximately

To know how long you should delay buying the computer and starting the program so that it will finish in the shortest amount of time from now, substitute t into equation 2

T(2.5) = 2.5 + (7)[tex]2^{-3(2.5)/2}[/tex]

T(2.5) = 2.5 + 0.5202

T(2.5) = 3.02 years

T (2.5) = 3 years approximately

Therefore, in order to run the program in the shortest time, you should delay for 3 years

Learn more here: https://brainly.com/question/6497099

Answer:

true

Explanation:

in the dictionary they mean the same thing

Quantitative data are statistical and numerical facts about a project that can be counted, measured or expressed using numbers.

Quantitative data is statistical and its nature is usually structured, it uses numbers and values that are most suitable for the analysis of a project.

Therefore, we can conclude that quantitative data is data that comes from numerical information, quantities, percentages, proportions and statistics.

Learn more about quantitative data here: https://brainly.com/question/96076

Answer:

a good algorithm must be able to accept a set of defined input. Output: a good algorithm should be able to produce results as output, preferably solutions. Finiteness: the algorithm should have a stop after a certain number of instructions. Generality: the algorithm must apply to a set of defined inputs.Explanation:

A good algorithm should have Steps, order, and outcomes. The correct option is C.

An algorithm is a set of instructions that solves a particular problem or performs a specific task.

An algorithm must be well-defined and organised in order to be effective, with clear steps or procedures, a logical order of operations, and a clear understanding of the expected outcomes or results.

As a result, the steps, the order in which those steps are executed, and the expected outcomes or results of following those steps are three essential components of a good algorithm.

Option A describes the fundamental components of a programme, but it is not always a good algorithm.

Option B emphasises some important characteristics of good code, but not specifically related to algorithm design.

Option D addresses important aspects of any type of technical writing, but is not specifically related to algorithm design.

Thus, the correct option is C.

For more details regarding algorithm, visit:

https://brainly.com/question/22984934

#SPJ7

Answer:

The first Industrial Revolution began in Great Britain in the mid-to-late 1700s, when innovation led to goods being produced in large quantities due to machine manufacturing.

This process began in Britain in the 18th century and from there spread to other parts of the world. Although used earlier by French writers, the term Industrial Revolution was first popularized by the English economic historian Arnold Toynbee (1852–83) to describe Britain's economic development from 1760 to 1840.

Answer:

This process began in Britain in the 18th century and from there spread to other parts of the world. Although used earlier by French writers, the term Industrial Revolution was first popularized by the English economic historian Arnold Toynbee (1852–83) to describe Britain’s economic development from 1760 to 1840  

Historians have identified several reasons for why the Industrial Revolution began first in Britain, including: the effects of the Agricultural Revolution, large supplies of coal, geography of the country, a positive political climate, and a vast colonial empire.

Explanation:

Answer:

man

Explanation:

The appropriate function which could be used to model the scenario can be written thus ; The program is written in python 3 ;

y = 3x + 3.5

#since no data is given ; using an hypothetical regression equation expressed in slope - intercept format ; where, x = duration and y = Predicted wait time.

def predict_wait(x) :

#initialize a function named predict_wait and takes in a certain duration value, x

y = 3*x + 3.5

#input the x - value into the regression equation to calculate y

return y

#return y

Learn more : https://brainly.com/question/25556810

Answer: C P U Terms in this set (124) What is the CPU responsible for? Fetching program instructions, decoding each instruction that is fetched, and performing the indicated sequence of operations on the correct data.

Explanation:

The Central Processing Unit is responsible for fetching program instructions, decoding each one, and performing the indicated sequence of operations.

A central processing unit, often known as a central processor, main processor, or simply processor, is the electrical circuitry that processes computer program instructions. The CPU executes fundamental arithmetic, logic, controlling, and input/output operations as provided by the program's instructions.

The CPU is in charge of all data processing. It keeps data, interim outcomes, and instructions saved (program). It controls how all computer components work.

Therefore, it can be concluded that The CPU is in charge of acquiring program instructions, decoding each one, and performing the prescribed series of actions on the proper data.

Learn more about CPU here:

https://brainly.com/question/21477287

#SPJ5